Search

Recreational Ecological Parks (REPs) play a pivotal role in advancing sustainable development by promoting ecotourism, conserving biodiversity, and providing inclusive recreational opportunities with minimal environmental impact. Assessing the potential for REP development is crucial to optimize the sustainable use of natural resources and enhance ecological and socio-economic benefits. This study introduces a sustainability-oriented Spatial Multi-Criteria Decision Analysis (SMCDA) framework to evaluate and optimize REP development in Mazandaran Province, Iran. The framework incorporates 33 criteria across five categories: 13 for network connectivity and accessibility; 10 for facilities, services, and tourism potential; 4 for landform and land use; 3 for natural hazards; and 3 for climate conditions. Criteria were standardized using the minimum–maximum method and weighted based on expert input via the Best–Worst Method. A weighted linear combination approach was then applied to generate REP suitability maps. Existing recreational and tourism (R&T) sites were assessed against these maps, and a non-parametric bootstrapping method quantified uncertainties in suitability classifications. The results revealed that approximately 8%, 17%, 26%, 30%, and 19% of the study area fell into very low, low, moderate, high, and very high suitability classes, respectively. Among 151 R&T sites, 33% and 34% were situated in areas classified as very high and high suitability. Prediction rates were most accurate in the very high suitability category, while uncertainty analysis indicated a mean of 13% and a standard deviation of 1.7%, with uncertainties predominantly concentrated in lower suitability classes. The findings underscore the SMCDA framework's efficacy in guiding sustainable REP development by identifying optimal sites and managing uncertainties. This study contributes to sustainability by integrating ecological, economic, and social dimensions into decision-making processes, thereby fostering resilience and long-term environmental stewardship in tourism planning. [ABSTRACT FROM AUTHOR]

Urban micro-climate plays an important role in human activities and in ensuring public health. For instance, the urban heat island effect is crucial to the thermal comfort of citizens and tourists, similar to the urban cool island effect's importance on human and infrastructure resilience. Approximately 35% of global big cities are located in drylands. While existing research has focused on the spatial and temporal changes of surface urban cooling island intensity (SUCII) in drylands in the past, there is a gap in predicting the future spatiotemporal changes in SUCII for cities within these dryland regions. This study aims to forecast the spatiotemporal dynamics of daytime SUCII of representative growing cities with a dry and cold climate. Kerman and Zahedan cities, which are undergoing large urbanization and have harsh hot summer climates, were selected as the study area. Landsat 5 and 8 images and products were utilized for six timestamps within the timeframe of 1986–2023. Various methods, including a random forest algorithm, spectral indices, Cellular Automata-Markov (CA-Markov) model, the cross-tabulation model, and spatial overlay and zonal statistics, were employed to assess and model the spatiotemporal changes in SUCII. Initially, historical land cover maps, land surface temperature (LST), surface biophysical characteristics, and SUCII data were prepared, and their spatiotemporal changes were evaluated. Then, projected maps for these variables for the year 2045 were produced. The results indicated that the built-up areas, bare lands, and green spaces of Kerman (Zahedan) city in 1986 were 26.6 km2 (17.6 km2), 103 km2 (92.5 km2), and 44.4 km2 (5.6 km2), respectively, and these values reached 99.3 km2 (41.9 km2), 61.2 km2 (70.7 km2), and 13.5 km2 (3.2 km2) in 2023. The built-up lands area of Kerman (Zahedan) city is expected to increase by approximately 26% (36%) by 2045, while bare land and green space are expected to decrease by about 32% (20%) and 39% (31%), respectively. The greatest rise in average LST of Kerman (Zahedan) city is associated with the conversion of green spaces to barren land, resulting in a notable increase of 5.5 °C (4.3 °C) in 1986–2023. The conversion of barren land to built-up land in Kerman (Zahedan) city has led to a decrease of 4.6 °C (3.8 °C) in LST. The SUCII of Kerman (Zahedan) city for 1986, 1994, 2001, 2008, 2015, and 2023 were −0.3 °C (0.9 °C), −0.8 °C (0.4 °C), −1.4 °C (−0.5 °C), −1.9 °C (−1.5 °C), −2.6 °C (−2.5 °C), and −3.2 °C (−3.4 °C), respectively. The projected SUCII in Kerman (Zahedan) city for 2045 is about −4.3 °C (−4.5 °C), indicating an increasing trend in SUCII in the future. The area of zones without SUCII in Kerman (Zahedan) city decreased by 44.8 Km2 (54.8 Km2) from 1986 to 2023, while the areas of low, medium, and high SUCII classes increased by 9.1 Km2 (9.9 Km2), 10.9 Km2 (11.9 Km2), and 24.8 Km2 (33.1 Km2), respectively. The area of non-SUCII and high SUCII classes of Kerman (Zahedan) city in 2045 is expected to decrease by 31.5 Km2 (12.0 Km2) and increase by 51.2 Km2 (9.5 Km2) compared with 2023. The findings of this research indicate that the physical growth of cities in drylands can lead to the moderation of LST, contrary to mechanisms in humid and wet regions. [ABSTRACT FROM AUTHOR]

Due to the limited number and sparse distribution of meteorological and hydrometric stations in most watersheds, the runoff estimation based on these stations may not be accurate. However, the accurate determination of the Antecedent Soil Moisture (ASM) in watersheds can improve the accuracy of runoff forecasting. The objective of this study is to utilize the ASM derived from satellite imagery to enhance the accuracy of runoff estimation in a mountainous watershed. In this study, a range of Remote Sensing (RS) data, including surface biophysical and topographic features, climate data, hydrometric station flow data, and a ground-based measured SM database for the Balikhli-Chay watershed in Iran, were utilized. The Soil Conservation Service Curve Number (SCS-CN) method was employed to estimate runoff. Two approaches were used for estimating the ASM: (1) using the precipitation data recorded in ground stations, and (2) using the SM data obtained from satellite images. The accuracy of runoff estimation was then calculated for these two scenarios and compared. The mean Nash–Sutcliffe statistic was found to be 0.63 in the first scenario and 0.74 in the second scenario. The inclusion of ASM derived from the satellite imagery in the precipitation–runoff model resulted in a 51% increase in the accuracy of runoff estimation compared to using precipitation data recorded in ground stations. These findings have significant implications for improving the accuracy of ASM and runoff modeling in various applications. [ABSTRACT FROM AUTHOR]

The ability to obtain accurate precipitation data from various geographic locations is crucial for many applications. Various global products have been released in recent decades for estimating precipitation spatially and temporally. Nevertheless, it is extremely important to provide reliable and accurate products for estimating precipitation in a variety of environments. This is due to the complexity of topographic, climatic, and other factors. This study proposes a multi-product information combination for improving precipitation data accuracy based on a generalized regression neural network model using global and local optimization strategies. Firstly, the accuracy of ten global precipitation products from four different categories (satellite-based, gauge-corrected satellites, gauge-based, and reanalysis) was assessed using monthly precipitation data collected from 1896 gauge stations in Iran during 2003–2021. Secondly, to enhance the accuracy of the modeled precipitation products, the importance score of effective and auxiliary variables—such as elevation, the Enhanced Vegetation Index (EVI), the Land Surface Temperature (LST), the Soil Water Index (SWI), and interpolated precipitation maps—was assessed. Finally, a generalized regression neural network (GRNN) model with global and local optimization strategies was used to combine precipitation information from several products and auxiliary characteristics to produce precipitation data with high accuracy. Global precipitation products scored higher than interpolated precipitation products and surface characteristics. Furthermore, the importance score of the interpolated precipitation products was considerably higher than that of the surface characteristics. SWI, elevation, EVI, and LST scored 53%, 20%, 15%, and 12%, respectively, in terms of importance. The lowest RMSE values were associated with IMERGFinal, TRMM3B43, PERSIANN-CDR, ERA5, and GSMaP-Gauge. For precipitation estimation, these products had Kling–Gupta efficiency (KGE) values of 0.89, 0.86, 0.77, 0.78, and 0.60, respectively. The proposed GRNN-based precipitation product with a global (local) strategy showed RMSE and KGE values of 9.6 (8.5 mm/mo) and 0.92 (0.94), respectively, indicating higher accuracy. Generally, the accuracy of global precipitation products varies depending on climatic conditions. It was found that the proposed GRNN-derived precipitation product is more efficient under different climatic conditions than global precipitation products. Moreover, the local optimization strategy based on climatic classes outperformed the global optimization strategy. [ABSTRACT FROM AUTHOR]

The accuracy of land crop maps obtained from satellite images depends on the type of feature selection algorithm and classifier. Each of these algorithms have different efficiency in different conditions; therefore, developing a suitable strategy for combining the capabilities of different algorithms in preparing a land crop map with higher accuracy can be very useful. The objective of this study was to develop a fusion-based framework for improving land crop mapping accuracy. First, the features were retrieved using the Sentinel 1, Sentinel 2, and Landsat-8 imagery. Then, training data and various feature selection algorithms including recursive feature elimination (RFE), random forest (RF), and Boruta were used for optimal feature selection. Various classifiers, including artificial neural network (ANN), support vector machine (SVM), and RF, were implemented to create maps of land crops relying on optimal features and training data. After that, in order to increase the result accuracy, maps of land crops derived from several scenarios were fused using a fusion-based voting strategy at the level of decision, and new maps of land crops and classification uncertainty maps were prepared. Subsequently, the performance of different scenarios was evaluated and compared. Among the feature selection algorithms, RF accuracy was higher than RFE and Boruta. Moreover, the efficiency of RF was higher than SVM and ANN. The overall accuracy of the voting scenario was higher than all other scenarios. The finding of this research demonstrated that combining the features' capabilities extracted from sensors in different spectral ranges, different feature selection algorithms, and classifiers improved the land crop classification accuracy. [ABSTRACT FROM AUTHOR]

The purpose of this study was to present a new strategy based on fusion at the decision level for modeling the crop residue. To this end, a set of satellite imagery and field data, including the Residue Cover Fraction (RCF) of corn, wheat and soybean was used. Firstly, the efficiency of Random Forest Regression (RFR), Support Vector Regression (SVR), Artificial Neural Networks (ANN) and Partial-Least-Squares Regression (PLSR) in RCF modeling was evaluated. Furthermore, to increase the accuracy of RCF modeling, different algorithms results were combined based on their modeling error, which is called the decision-based fusion strategy. The R2 (RMSE) between the actual and modeled RCF based on ANN, RFR, SVR and PLSR algorithms for corn were 0.83 (3.89), 0.86 (3.25), 0.76 (4.56) and 0.75 (4.81%), respectively. These values were 0.81 (4.86), 0.85 (4.22), 0.78 (5.45) and 0.74 (6.20%) for wheat and 0.81 (3.96), 0.83 (3.38), 0.76 (5.01) and 0.72 (5.65%) for soybean, respectively. The error of corn, wheat and soybean RCF estimating decision-based fusion strategy was reduced by 0.90, 0.96 and 0.99%, respectively. The results showed that by implementing the decision-based fusion strategy, the accuracy of the RCF modeling was significantly improved. [ABSTRACT FROM AUTHOR]

The surface anthropogenic heat island (SAHI) phenomenon is one of the most important environmental concerns in urban areas. SAHIs play a significant role in quality of urban life. Hence, the quantification of SAHI intensity (SAHII) is of great importance. The impervious surface cover (ISC) can well reflect the degree and extent of anthropogenic activities in an area. Various actual ISC (AISC) datasets are available for different regions of the world. However, the temporal and spatial coverage of available and accessible AISC datasets is limited. This study was aimed to evaluate the spectral indices efficiency to daytime SAHII (DSAHII) quantification. Consequently, 14 cities including Budapest, Bucharest, Ciechanow, Hamburg, Lyon, Madrid, Porto, and Rome in Europe and Dallas, Seattle, Minneapolis, Los Angeles, Chicago, and Phoenix in the USA, were selected. A set of 91 Landsat 8 images, the Landsat provisional surface temperature product, the High Resolution Imperviousness Layer (HRIL), and the National Land Cover Database (NLCD) imperviousness data were used as the AISC datasets for the selected cities. The spectral index-based ISC (SIISC) and land surface temperature (LST) were modelled from the Landsat 8 images. Then, a linear least square model (LLSM) obtained from the LST-AISC feature space was applied to quantify the actual SAHII of the selected cities. Finally, the SAHII of the selected cities was modelled based on the LST-SIISC feature space-derived LLSM. Finally, the values of the coefficient of determination (R2) and the root mean square error (RMSE) between the actual and modelled SAHII were calculated to evaluate and compare the performance of different spectral indices in SAHII quantification. The performance of the spectral indices used in the built LST-SIISC feature space for SAHII quantification differed. The index-based built-up index (IBI) (R2 = 0.98, RMSE = 0.34 °C) and albedo (0.76, 1.39 °C) performed the best and worst performance in SAHII quantification, respectively. Our results indicate that the LST-SIISC feature space is very useful and effective for SAHII quantification. The advantages of the spectral indices used in SAHII quantification include (1) synchronization with the recording of thermal data, (2) simplicity, (3) low cost, (4) accessibility under different spatial and temporal conditions, and (5) scalability. [ABSTRACT FROM AUTHOR]

Urban Surface Ecological Status (USES) reflects the structure and function of an urban ecosystem. USES is influenced by the surface biophysical, biochemical, and biological properties. The assessment and modeling of USES is crucial for sustainability assessment in support of achieving sustainable development goals such as sustainable cities and communities. The objective of this study is to present a new analytical framework for assessing the USES. This analytical framework is centered on a new index, Remotely Sensed Urban Surface Ecological index (RSUSEI). In this study, RSUSEI is used to assess the USES of six selected cities in the U.S.A. To this end, Landsat 8 images, water vapor products, and the National Land Cover Database (NLCD) land cover and imperviousness datasets are downloaded for use. Firstly, Land Surface Temperature (LST), Wetness, Normalized Difference Vegetation Index (NDVI), and Normalized Difference Soil Index (NDSI) are derived by remote sensing methods. Then, RSUSEI is developed by the combination of NDVI, NDSI, Wetness, LST, and Impervious Surface Cover (ISC) with Principal Components Analysis (PCA). Next, the spatial variations of USES across the cities are evaluated and compared. Finally, the association degree of each parameter in the USES modeling is investigated. Results show that the spatial variability of LST, ISC, NDVI, NDSI, and Wetness is heterogeneous within and between cities. The mean (standard deviation) value of RSUSEI for Minneapolis, Dallas, Phoenix, Los Angeles, Chicago and Seattle yielded 0.58 (0.16), 0.54 (0.17), 0.47 (0.19), 0.63 (0.21), 0.50 (0.17), and 0.44 (0.19), respectively. For all the cities, PC1 included more than 93% of the surface information, which is contributed by greenness, moisture, dryness, heat, and imperviousness. The highest and lowest mean values of RSUSEI are found in "Developed, High intensity" (0.76) and "Developed, Open Space" (0.35) lands, respectively. The mean correlation coefficient between RSUSEI and LST, ISC, NDVI, NDSI, and Wetness, is 0.47, 0.97, −0.31, 0.17, and −0.27, respectively. The statistical significance of these correlations is confirmed at 95% confidence level. These results suggest that the association degree of ISC in USES modeling is the highest, despite the differences in land cover and biophysical characteristics in the cities. RSUSEI could be very useful in modeling and comparing USES across cities with different geographical, climatic, environmental, and biophysical conditions and can also be used for assessing urban sustainability over space and time. [ABSTRACT FROM AUTHOR]