Search

This study considers critical aspects of water management and crop productivity in wheat cultivation, specifically examining the daily cumulative actual evapotranspiration (ETa). Traditionally, ETa surface energy balance models have provided estimates at discrete time points, lacking a holistic integrated approach. Field trials were conducted with 22 distinct wheat varieties, grown under both irrigated and rainfed conditions over a two-year span. Leaf area index prediction was enhanced through a robust multiple regression model, incorporating data acquired from an unmanned aerial vehicle using an RGB sensor, and resulting in a predictive model with an R2 value of 0.85. For estimation of the daily cumulative ETa integral, an integrated approach involving remote sensing and energy balance models was adopted. An examination of the relationships between crop yield and evapotranspiration (ETa), while considering factors like year, irrigation methods, and wheat cultivars, unveiled a pronounced positive asymptotic pattern. This suggests the presence of a threshold beyond which additional water application does not significantly enhance crop yield. However, a genetic analysis of the 22 wheat varieties showed no correlation between ETa and yield. This implies opportunities for selecting resource-efficient wheat varieties while minimizing water use. Significantly, substantial disparities in water productivity among the tested wheat varieties indicate the possibility of intentionally choosing lines that can optimize grain production while minimizing water usage within breeding programs. The results of this research lay the foundation for the development of resource-efficient agricultural practices and the cultivation of crop varieties finely attuned to water-scarce regions. [ABSTRACT FROM AUTHOR]

The development of accurate grain yield (GY) multivariate models using normalized difference vegetation index (NDVI) assessments obtained from aerial vehicles and additional agronomic traits is a promising option to assist, or even substitute, laborious agronomic in-field evaluations for wheat variety trials. This study proposed improved GY prediction models for wheat experimental trials. Calibration models were developed using all possible combinations of aerial NDVI, plant height, phenology, and ear density from experimental trials of three crop seasons. First, models were developed using 20, 50 and 100 plots in training sets and GY predictions were only moderately improved by increasing the size of the training set. Then, the best models predicting GY were defined in terms of the lowest Bayesian information criterion (BIC) and the inclusion of days to heading, ear density or plant height together with NDVI in most cases were better (lower BIC) than NDVI alone. This was particularly evident when NDVI saturates (with yields above 8 t ha-1) with models including NDVI and days to heading providing a 50% increase in the prediction accuracy and a 10% decrease in the root mean square error. These results showed an improvement of NDVI prediction models by the addition of other agronomic traits. Moreover, NDVI and additional agronomic traits were unreliable predictors of grain yield in wheat landraces and conventional yield quantification methods must be used in this case. Saturation and underestimation of productivity may be explained by differences in other yield components that NDVI alone cannot detect (e.g. differences in grain size and number). [ABSTRACT FROM AUTHOR]

The current lack of efficient methods for high throughput field phenotyping is a constraint on the goal of increasing durum wheat yields. This study illustrates a comprehensive methodology for phenotyping this crop's water use through the use of the two-source energy balance (TSEB) model employing very high resolution imagery. An unmanned aerial vehicle (UAV) equipped with multispectral and thermal cameras was used to phenotype 19 durum wheat cultivars grown under three contrasting irrigation treatments matching crop evapotranspiration levels (ETc): 100%ETc treatment meeting all crop water requirements (450 mm), 50%ETc treatment meeting half of them (285 mm), and a rainfed treatment (122 mm). Yield reductions of 18.3 and 48.0% were recorded in the 50%ETc and rainfed treatments, respectively, in comparison with the 100%ETc treatment. UAV flights were carried out during jointing (April 4th), anthesis (April 30th), and grain-filling (May 22nd). Remotely-sensed data were used to estimate: (1) plant height from a digital surface model (H, R 2 = 0.95, RMSE = 0.18m), (2) leaf area index from multispectral vegetation indices (LAI, R 2 = 0.78, RMSE = 0.63), and (3) actual evapotranspiration (ETa) and transpiration (T) through the TSEB model (R 2 = 0.50, RMSE = 0.24 mm/h). Compared with ground measurements, the four traits estimated at grain-filling provided a good prediction of days from sowing to heading (DH, r = 0.58–0.86), to anthesis (DA, r = 0.59–0.85) and to maturity (r = 0.67–0.95), grain-filling duration (GFD, r = 0.54–0.74), plant height (r = 0.62–0.69), number of grains per spike (NGS, r = 0.41–0.64), and thousand kernel weight (TKW, r = 0.37–0.42). The best trait to estimate yield, DH, DA, and GFD was ETa at anthesis or during grain filling. Better forecasts for yield-related traits were recorded in the irrigated treatments than in the rainfed one. These results show a promising perspective in the use of energy balance models for the phenotyping of large numbers of durum wheat genotypes under Mediterranean conditions. [ABSTRACT FROM AUTHOR]

This work assesses the use of aerial imagery for the vegetation cover characterization in cork oak woodlands. The study was conducted in a cork oak woodland in central Portugal during the summer of 2017. Two supervised classification methods, pixel-based and object-based image analysis (OBIA), were tested using a high spatial resolution image mosaic. Images were captured by an unmanned aerial vehicle (UAV) equipped with a red, green, blue (RGB) camera. Four different vegetation covers were distinguished: cork oak, shrubs, grass and other (bare soil and tree shadow). Results have been compared with field data obtained by the point-intercept (PI) method. Data comparison reveals the reliability of aerial imagery classification methods in cork oak woodlands. Results show that cork oak was accurately classified at a level of 82.7% with pixel-based method and 79.5% with OBIA. 96.7% of shrubs were identified by OBIA, whereas there was an overestimation of 21.7% with pixel approach. Grass presents an overestimation of 22.7% with OBIA and 12.0% with pixel-based method. Limitations rise from using only spectral information in the visible range. Thus, further research with the use of additional bands (vegetation indices or height information) could result in better land-cover type classification. [ABSTRACT FROM AUTHOR]

Thermal images have many applications in agronomy, including crop water stress status assessment. Nowadays, the miniaturization of thermal cameras allows installing them onboard the Unmanned Aerial Vehicles (UAV), but this miniaturization leads to some difficulties: the miniaturized thermal cameras have no temperature control system of their sensor. The instability of the miniaturized camera makes a high drift in the acquisition of temperature data so that acquired thermal images don't fit the real temperature of the studying object, so data have to be continuously corrected. We need to have stable reference on field in order to compute the actual temperature value. In this article we present a method for radiometric correction of UAV remote sensed thermal images. We have implemented a device in order to retrieve ground temperature measurements. This device is composed with four targets (cold, hot, dry soil, wet soil) which measured continuously the target temperature thanks to IR120 (Campbell ®) radio-thermometer. A meteorological station is included in this ground system and acquires air temperature and moisture, solar radiation, wind speed and direction every 10 seconds. The images are radiometrically corrected by linear regression from on ground thermal data collected. Corrected images have been compared with mean canopy surface temperature of a sample of 10 trees measured with radio-thermometers. The results showed a good link between data from on ground radio-thermometer and data from thermal camera after radiometric correction. We can conclude that images obtained by this method are of sufficient quality to be used in vegetation water stress studies. [ABSTRACT FROM AUTHOR]

A procedure named CROPCLASS was developed to semi-automate census parcel crop assessment in any agricultural area using multitemporal remote images. For each area, CROPCLASS consists of a) a definition of census parcels through vector files in all of the images; b) the extraction of spectral bands (SB) and key vegetation index (VI) average values for each parcel and image; c) the conformation of a matrix data (MD) of the extracted information; d) the classification of MD decision trees (DT) and Structured Query Language (SQL) crop predictive model definition also based on preliminary land-use ground-truth work in a reduced number of parcels; and e) the implementation of predictive models to classify unidentified parcels land uses. The software named CROPCLASS-2.0 was developed to semi-automatically perform the described procedure in an economically feasible manner. The CROPCLASS methodology was validated using seven GeoEye-1 satellite images that were taken over the LaVentilla area (Southern Spain) from April to October 2010 at 3- to 4-week intervals. The studied region was visited every 3 weeks, identifying 12 crops and others land uses in 311 parcels. The DT training models for each cropping system were assessed at a 95% to 100% overall accuracy (OA) for each crop within its corresponding cropping systems. The DT training models that were used to directly identify the individual crops were assessed with 80.7% OA, with a user accuracy of approximately 80% or higher for most crops. Generally, the DT model accuracy was similar using the seven images that were taken at approximately one-month intervals or a set of three images that were taken during early spring, summer and autumn, or set of two images that were taken at about 2 to 3 months interval. The classification of the unidentified parcels for the individual crops was achieved with an OA of 79.5%. [ABSTRACT FROM AUTHOR]

• The tree response to water constraints was continuously assessed by thermal sensors. • Variations in apple canopy temperature were used as a proxy of stomatal closure. • Stressful conditions both resulted from evaporative demand and soil drought. • Diurnal stomatal regulation occurred earlier in trees under soil water deficit. • Thermal phenotyping contributed to the assessment of varietal adaptation capacities. This research aimed at analyzing the response of apple tree varieties subjected to soil water deficit and atmospheric drought in a field phenotyping platform located in the Mediterranean area. The main assumption of the study was that seasonal and daily stomatal behavior can be monitored by continuous measurement of canopy surface temperature (Ts) as a proxy of stomatal closure. To achieve the study objectives, thermal monitoring of 6 pre-commercial apple varieties was simultaneously carried out throughout one season by nadir-oriented thermo-radiometers placed 1.50 m over the tree top canopy. Two water regimes were applied to each variety during a 4-week summer period: normal irrigation (WW) vs progressive water deficit (WS). The maximum difference in Ts between water regimes was recorded daily between 11:00 and 14:20 GMT, with an earlier closure of stomata in WS trees. During the day, a more negative stem water potential (Ψstem) and a higher diurnal Ts (+1° to +2 °C) were observed on WS trees, resulting in a significant limitation of fruit growth. Tree water stress was caused by both edaphic and atmospheric droughts, in the medium and short terms respectively, with inter-varietal and inter-regime differences highlighting distinct stomatal closure behaviors. Results suggest that some of the varieties studied are well adapted to stressful summer conditions, as long as irrigation needs are met, while other varieties show a particular sensitivity to the mid-day evaporative demand, which may limit their extension. Although these results are not comprehensive enough to predict the optimal performance of varieties under different stress scenarios, the proposed methodology allows to assess the dynamics of tree response to water constraints using non-invasive thermal sensors. It opens up new perspectives for the phenotyping of apple cultivars under abiotic stress, achievable through the quantified study of their transpiration flux in response to stress scenarios. These prospects will require further in planta measurements to dissect varietal differences. [ABSTRACT FROM AUTHOR]

A procedure to achieve the semi-automatic relative image normalization of multitemporal remote images of an agricultural scene called ARIN was developed using the following procedures: 1) defining the same parcel of selected vegetative pseudo-invariant features (VPIFs) in each multitemporal image; 2) extracting data concerning the VPIF spectral bands from each image; 3) calculating the correction factors (CFs) for each image band to fit each image band to the average value of the image series; and 4) obtaining the normalized images by linear transformation of each original image band through the corresponding CF. ARIN software was developed to semi-automatically perform the ARIN procedure. We have validated ARIN using seven GeoEye-1 satellite images taken over the same location in Southern Spain from early April to October 2010 at an interval of approximately 3 to 4 weeks. The following three VPIFs were chosen: citrus orchards (CIT), olive orchards (OLI) and poplar groves (POP). In the ARIN-normalized images, the range, standard deviation (s. d.) and root mean square error (RMSE) of the spectral bands and vegetation indices were considerably reduced compared to the original images, regardless of the VPIF or the combination of VPIFs selected for normalization, which demonstrates the method’s efficacy. The correlation coefficients between the CFs among VPIFs for any spectral band (and all bands overall) were calculated to be at least 0.85 and were significant at P = 0.95, indicating that the normalization procedure was comparably performed regardless of the VPIF chosen. ARIN method was designed only for agricultural and forestry landscapes where VPIFs can be identified. [ABSTRACT FROM AUTHOR]