Search

As one of the promising room temperature nuclear radiation detection materials, the all-inorganic perovskite CsPbBr3 single crystal has been receiving much attention in recent years. Even though the performance of the CsPbBr3 detector is improving continuously, the disadvantages of detection instability have not been solved fundamentally, and this instability is mainly caused by ionic migration in the CsPbBr3 single crystal itself. In this paper, a reasonable ionic migration model is proposed based on an in-depth study of the current hysteresis phenomenon and ionic migration mechanism in the Ti/CsPbBr3/Ti detector. The model shows that the ions migrate to the anode or cathode under an external electric field, and the accumulated ions subsequently form an inverted internal electric field inside the crystal and carrier transport barriers at the metal–semiconductor interface simultaneously. The photoelectric characteristic and ionic migration activation energy (E a i o n) fitting results also prove the rationality of the ionic migration model. Furthermore, the ionic migration model can also be used to explain the left-shift of the energy response peak and the decrease in the normalized charge collection efficiency in the Ti/CsPbBr3/Ti detector. This paper systematically investigates the intrinsic origin of migrated ions and the influence of ionic migration on detection stability, which will provide a potential solution to improve detection stability by suppressing ionic migration in the near future. [ABSTRACT FROM AUTHOR]

As an excellent representative of all‐inorganic perovskite materials, CsPbBr3 has been widely used in high‐energy rays or high‐energy particles detection for its outstanding high carrier mobility and long diffusion length. The great challenges and opportunities in these fields are crystal growth technology, especially the high‐quality and large‐sized CsPbBr3 single crystals. In this work, the influences of growth parameters (temperature gradient, growth rate, cooling rate) and thermal stress by the vertical Bridgman method on the quality and performance of CsPbBr3 crystals are systematically studied. The final results show that 10°C cm−1 is the optimized temperature gradient and 0.5 mm h−1 is the suitable growth rate for CsPbBr3 crystal growth. The study also shows that a cooling rate of 10°C h−1 for the general temperature interval and 1°C h−1 for the phase transition temperature interval is helpful to balance crystal growth efficiency as well as crystal quality. Crystal cracks caused by thermal stress as well as crystal adhesion on the ampoule can be effectively solved by depositing a uniform carbon film on the ampoule in advance. The optical, electrical and detection performance are also investigated. The optical characterization in the wavelength region ranging from ultraviolet to infrared indicates the crystal has a low density of deep‐level defects and good crystal quality. The resistivity over 109 Ω cm and μτ of electrons over 10−2 cm−2 V−1 proves that the electrical performance of the crystal has met the basic requirement for nuclear radiation detection. The metal–semiconductor–metal structure Ti/Ni/CsPbBr3/Ni/Ti detector fabricated from the optimized CsPbBr3 single crystal has an energy resolution of 12.85% (137Cs, 662 keV). The purpose of this work is to provide a useful guide and reference for the future exploration of repeatable and improvable CsPbBr3 crystal growth technology. [ABSTRACT FROM AUTHOR]

In the atmospheric surface layer (ASL), the anisotropic characteristics of turbulence become more complex due to the strong influence of heat flux and particle motion. In this paper, the effects of stratification stability and total saltation sand flux on turbulent anisotropy of ASL wall turbulence are systematically analyzed by using high-frequency 3D velocity, temperature, and saltation sand flux measured in the field. Our results show that the temperature gradient intensifies the spanwise turbulent motion and enhances the vertical motion asymmetry. Although the buoyancy-driven turbulence enhances the spanwise variation, the momentum transfer mode between the streamwise–vertical and spanwise–vertical does not change. With the increase in instability, the large-scale motions (LSM) of the spanwise velocity may be destroyed and more spanwise small-scale motions (SSM) formed. In addition, saltation increases the sharpness, randomness, and extreme frequency of spanwise velocity distribution, but does not change the momentum transfer mode. Saltation may enlarge the fluctuation range and scale of the spanwise velocity, but may not be the main factor affecting the anisotropy of SSM. These results can deepen people's understanding of wind-blown sand movement and turbulence properties in ASL, and provides empirical data and insights that can significantly contribute to the development and refinement of turbulence models, particularly those that need to account for the complex interplay between stratification stability, saltation sand flux, and turbulence anisotropy. [ABSTRACT FROM AUTHOR]

The essence of wind-blown sand movement is a particle movement system driven by high Reynolds number wall turbulence in the atmospheric surface layer (ASL). Understanding this phenomenon is crucial as the law and mechanism of sand movement have not been effectively revealed at present. In this study, we utilize the high-frequency time series data from the Oceano site, a renowned location for such studies, which includes streamwise wind velocity (u), wall-normal wind velocity (w), temperature (T), and total saltation mass flux (q) to delve deeper into wind-blown sand movement. The results indicate a positive correlation between T and w. Interestingly, this correlation not only escalates with height but also intensifies with the increase of the stratification stability parameters (z/L). Sand influences the intensity ratio of each quadrant to Reynolds stress without altering the time ratio. Both the ejection and sweep processes correlate well with z/L. Similarly, q also exhibits a good correlation with z/L. The buoyancy's impact on the low-frequency fluctuations of q might be through its effect on the low-frequency fluctuations of w, enhancing the sand transport capacity of w. This discovery holds profound implications for the study of two-phase flow in ASL and the precise prediction of surface sediment transport. [ABSTRACT FROM AUTHOR]

To improve the maintenance level and management efficiency, it is necessary to monitor the operating parameters of switch machines. This paper describes a comprehensive monitoring system for the operating parameters of switch machines. The proposed monitoring system can monitor the working conditions of several key components in the switch machine, including the push plate sleeve, throw rod, indication rod, motor and movable contact. On this basis, it can provide early warning, alarming and fault location judgment for faults caused by moving components in the switch machine. Thus, it enables the on-site maintenance personnel to maintain and repair the equipment in time before the failure occurs, so as to achieve "preventative maintenance". [ABSTRACT FROM AUTHOR]