Search

This paper presents a continuous frequency tuning Fabry–Perot Cavity (FPC) antenna of which the operating frequency can be varied from 4.87 to 5.84 GHz (18.1%). The cavity of the proposed antenna is excited by a double-layer antenna structure, which is made up of a main square patch and a parasitic one. The superstrate is a frequency-selective surface, consisting of 6 × 6 square-patch-type unit cells. The frequency tuning property is realized by employing 48 phase-changing elements placed around the main patch, which forms a reconfigurable high impedance surface (HIS). By controlling the biasing voltages of the varactors inserted in the HIS element, its capacitances and reflection phases can be varied continuously, which leads to a variation of the operating frequency. An antenna prototype has been fabricated and measured for validation. The measured results are in good agreement with the simulated ones. In the frequency tuning range, the measured realized gains have a smaller variation from 10.2 to 14.1 dBi compared with other reported frequency tuning FPC antennas. [ABSTRACT FROM AUTHOR]

In this work, a new reconfigurable discrete 1D beam-steering Fabry–Perot cavity antenna with enhanced radiation performance is presented. It consists of a probe-fed patch antenna printed on the ground plane and a reconfigurable metasurface acting as the upper partially reflective surface to realize beam steering. By utilizing 6 × 6 proposed reconfigurable unit cells on the superstrate, the beam-steering angle can be effectively enhanced from ±7° to ±17° with fewer active elements and a much simpler biasing network. The proposed antenna was fabricated to validate the feasibility. Good agreement between the simulated and measured results is achieved. Moreover, the measured realized gains are over 11 dBi with a gain variation from the boresight direction to the tilted direction <0.2 dBi. [ABSTRACT FROM AUTHOR]

A compact monopolar microstrip patch antenna (MPA) with enhanced‐bandwidth is proposed. In order to achieve the miniaturized patch, the zeroth‐order mode of the MPA instead of its higher‐order modes is employed at first by loading the shorting pin around the center of the patch. After that, a L‐shaped microstrip line with a shorting pin is introduced at the periphery of the patch radiator to excite an additional non‐radiative mode for bandwidth enhancement. In final, the proposed MPA is fabricated and measured. The results illustrate that the antenna generates an enhanced‐bandwidth of about 4.1% ranging from 2.39 to 2.49 GHz, which is significantly larger than that of the traditional MPA around 1%. Meanwhile, the dimensions of the radiating patch are obviously decreased down due to the employment of zeroth‐order mode, which are kept as small as about 0.17 λ0 × 0.22 λ0 × 0.026 λ0 (λ0 is the free‐space wavelength). [ABSTRACT FROM AUTHOR]