Search

This paper focuses on high-performance fibre-reinforced concrete and its flexural strength concerning fibre orientation. The orientation is provided by a fully controlled special device. This device can align the fibres in fresh concrete using a magnetic field. The specimens are inserted into the device at different angles to ensure different fibre orientations concerning the longer side of the sample, which corresponds to the direction of the main tensile stresses. Specifically, angles of 0 °, 30 #x00B0;, 60 ° and 90 ° are tested and compared with each other and with reference specimens that are not exposed to a magnetic field. All samples are measured by a non-destructive method. This method was developed in our previous research and is based on measuring the quality factor Q of a measuring coil using an impedance meter. The samples are inserted into a measuring coil connected to an impedance meter. Flexural strength is obtained from the results of a three-point bending test. All samples are tested until complete failure.

This work investigates the effect of various sand fractions on the ballistic resistance of ultra-high-performance steel-fibre-reinforced concrete (UHP-SFRC) samples. We specifically investigated replacing expensive and generally inaccessible microsands with commonly available sands. The tests and the measured values show that replacing part of the microsand with the more commonly and economically acceptable 0/2 mm aggregate fraction minimises the resulting mechanical properties and ballistic resistance. The most common type of ammunition was used to test all sample bodies, which is a 7.62 × 39 mm calibre with an all-metal jacket and a mild steel core. The damage's extent and mode were determined using a 3D scanner operating on photogrammetry. [ABSTRACT FROM AUTHOR]

In order to achieve better efficiency of dispersed fiber reinforcement in cementitious composites, manufacturers need to be able to directly control the fiber orientation. The magnetic orientation of fibers is an effective way to align fibers in the desired direction of the main tensile stresses and significantly improve the load-bearing capacity of the composite material. In this study, cementitious composites with different percentages of fiber reinforcement were subjected to the magnetic fiber-orienting process and their resulting mechanical parameters were examined. Also, a nondestructive method was used to evaluate the fiber orientation and volume. The flexural strengths and the capacity to dissipate mechanical energy were improved considerably compared to the reference nonoriented specimens. The nondestructive method was also reasonably accurate to predict these results. [ABSTRACT FROM AUTHOR]

Featured Application: The ballistic modular system was developed to serve as a mobile protective barrier against projectile impact and also to mitigate the effect of secondary fragments and explosions. The advantage of the system lies in its very fast assembly at the point of intervention, where no heavy machinery is needed. The whole system can be assembled just by manual manipulation into various shapes. The system is based on reasonable mobility and versatility of the whole solution, which is achieved by combining basic elements according to the needs of the situation. The static response of ballistic panels and also its resistance to blast and ballistic impact is investigated in the framework of this study. By connecting individual ballistic panels together, the protective barrier can be constructed. The protective barrier can be featured as a system with high mobility and versatility that is achieved by linking basic interlocking plate elements together. The resulting protective barrier can be shaped according to many possible scenarios in a wall with various possible opening angles and a small post with the tetragonal base or a larger post with the hexagonal ground plan. The material solution of the protective barrier benefits from the application of ultra-high-performance fibre-reinforced cement-based composites (UHPFRCC), which meets the requirements for enhanced resistance against extreme loads such as blast or impact. Besides, by using UHPFRCC, thin and slender design can be adopted, which is advantageous in many ways. Slender design results in a lower weight, allowing for easy manipulation and replacement. To verify the behavior of the panels, the proposed barrier was subjected to various loadings at different strain rates. The experimental campaign demonstrated that the protective barrier has a reasonable load-bearing capacity and also sufficient resistance against projectile impact and blast effects. [ABSTRACT FROM AUTHOR]

Ultra-high-performance steel-fibre-reinforced concrete (UHP-SFRC) is a technologically advanced composite with a high ability to absorb and dissipate mechanical energy. This work investigates the possibility of increasing ballistic resistance by adding different percentages of corundum and basalt aggregate into this type of concrete. The most common type of ammunition, a 7.62 mm × 39 mm calibre with a full-metal jacket and a mild-steel core (FMJ-MSC), was used to test all samples. The size of the damage and the mode of failure were determined using a 3D scanner operating on the principle of photogrammetry. The experimental campaign showed that the addition of basalt and, especially, corundum aggregate has a positive effect on ballistic resistance. In particular, the increase in compressive strength and the slight decrease in depth of penetration (DOP) was observed in the case of the usage of the corundum aggregate. [ABSTRACT FROM AUTHOR]

This paper deals with the description, measurement, and use of electromagnetic properties of ferromagnetic fibres used as dispersed fibre reinforcement in composite mixtures. Firstly, the fibres' magnetic properties are shown, and a method of measuring the hysteresis loop of fibres is proposed. The results from the measurements are presented and a discussion of the influence of measured parameters on the fibres' orientation in a magnetic field is performed. Furthermore, methods of non-destructive estimation, of their amount and orientation in the composite specimens, are discussed. The main experimental goal of this paper is to show the relationship between this non-destructive method's results and the destructive flexural strength measurements. The method is sensitive enough to provide information related to fibre reinforcement. [ABSTRACT FROM AUTHOR]