Search

Purpose: Breast ultrasound(US) is recently becoming more and more popular for detecting breast lesions. However, screening results in hundreds of USimages for each subject. This magnitude of images can lead to fatigue in radiologist, causing failure in the detection of lesions of a subtle nature. In this study, an image stitching technique is proposed for combining multipass images of the whole breast into a series of full-view images, and a fully automatic screening system that works off these images is also presented. Methods: Using the registration technique based on the simple sum of absolute block-mean difference (SBMD) measure, three-pass images were merged into full-view USimages. An automatic screening system was then developed for detecting tumors from these full-view images. The preprocessing step was used to reduce the tumor detection time of the system and to improve image quality. The gray-level slicing method was then used to divide images into numerous regions. Finally, seven computerized features—darkness, uniformity, width-height ratio, area size, nonpersistence, coronal area size, and region continuity—were defined and used to determine whether or not each region was a part of a tumor. Results: In the experiment, there was a total of 25 experimental cases with 26 lesions, and each case was composed of 252 images (three passes, 84 images/pass). The processing time of the proposed stitching procedure for each case was within 30 s with a Pentium IV 2.0 processor, and the detection sensitivity of the proposed CADsystem was 92.3% with 1.76 false positives per case. Conclusions: The proposed automatic screening system can be applied to the whole breast images stitched together via SBMD-based registration in order to detect tumors.

Breast density has been established as an independent risk factor associated with the development of breast cancer. The terms mammographic density and breast density are often used interchangeably, since most breast density studies are performed with projection mammography. It is known that increase in mammographic density is associated with an increased cancer risk. A sensitive method that allows for the measurement of small changes in breast density may provide useful information for risk management. Despite the efforts to develop quantitative breast density measurements from projection mammograms, the measurements show large variability as a result of projection imaging, differing body position, differing levels of compression, and variation of the x-ray beam characteristics. This study used two separate computer-aided methods, threshold-based and proportion-based evaluations, to analyze breast density on whole breast ultrasound(US)imaging and to compare with the grading results of three radiologists using projection mammography. Thirty-two female subjects with 252 images per case were included in this study. Whole breast USimages were obtained from an Aloka SSD-5500 ultrasound machine with an ASU-1004 transducer (Aloka, Japan). Before analyzing breast density, an adaptive speckle reduction filter was used for removing speckle noise, and a robust thresholding algorithm was used to divide breast tissue into fatty or fibroglandular classifications. Then, the proposed approaches were applied for analysis. In the threshold-based method, a statistical model was employed to determine whether each pixel in the breast region belonged to fibroglandular or fatty tissue. The proportion-based method was based on three-dimensional information to calculate the volumetric proportion of fibroglandular tissue to the total breast tissue. The experimental cases were graded by the proposed analysis methods and compared with the ground standard density classification assigned by a majority voting of three experienced breast radiologists. For the threshold-based method, 28 of 32 US test cases and for the proportion-based density classifier, 27 of 32 US test cases were found to be in agreement with the radiologist “ground standard” mammographic interpretations, resulting in overall accuracies of 87.5% and 84.4%, respectively. Moreover, the concordance values of the proposed methods were between 0.0938 and 0.1563, which were less than the average interobserver concordance of 0.3958. The experiment result showed that the proposed methods could be a reference opinion and offer concordant and reliable quantification of breast density for the radiologist.

Ultrasound imaging plays an important role in the field of breast cancer diagnosis because of its convenience and non-invasive. Recently, the development of computer-aided diagnosis (CAD) provides a convenient way for doctors in detecting breast cancer using ultrasound images. However, the previous CAD systems have some limits with the requirements of human intervention. Hence, in this paper, a novel automatic CAD system is proposed to find suspicious frames among whole breast ultrasound images. After applying watershed segmentation, suspicious segmented regions can be identified through several criteria defined according to the statistic and geometric features of a tumour. By examining 13 US test cases, almost all the tumours and cysts could successfully be detected when an average of two false positives for each case is produced. The experimental results prove the accuracy of this proposed system.

Breast ultrasound (US) is recently becoming more and more popular for detecting breast lesions. However, screening results in hundreds of US images for each subject. This magnitude of images can lead to fatigue in radiologist, causing failure in the detection of lesions of a subtle nature. In this study, an image stitching technique is proposed for combining multipass images of the whole breast into a series of full-view images, and a fully automatic screening system that works off these images is also presented.Using the registration technique based on the simple sum of absolute block-mean difference (SBMD) measure, three-pass images were merged into full-view US images. An automatic screening system was then developed for detecting tumors from these full-view images. The preprocessing step was used to reduce the tumor detection time of the system and to improve image quality. The gray-level slicing method was then used to divide images into numerous regions. Finally, seven computerized features--darkness, uniformity, width-height ratio, area size, nonpersistence, coronal area size, and region continuity--were defined and used to determine whether or not each region was a part of a tumor.In the experiment, there was a total of 25 experimental cases with 26 lesions, and each case was composed of 252 images (three passes, 84 images/pass). The processing time of the proposed stitching procedure for each case was within 30 s with a Pentium IV 2.0 processor, and the detection sensitivity of the proposed CAD system was 92.3% with 1.76 false positives per case.The proposed automatic screening system can be applied to the whole breast images stitched together via SBMD-based registration in order to detect tumors.

Breast density has been established as an independent risk factor associated with the development of breast cancer. The terms mammographic density and breast density are often used interchangeably, since most breast density studies are performed with projection mammography. It is known that increase in mammographic density is associated with an increased cancer risk. A sensitive method that allows for the measurement of small changes in breast density may provide useful information for risk management. Despite the efforts to develop quantitative breast density measurements from projection mammograms, the measurements show large variability as a result of projection imaging, differing body position, differing levels of compression, and variation of the x-ray beam characteristics. This study used two separate computer-aided methods, threshold-based and proportion-based evaluations, to analyze breast density on whole breast ultrasound (US) imaging and to compare with the grading results of three radiologists using projection mammography. Thirty-two female subjects with 252 images per case were included in this study. Whole breast US images were obtained from an Aloka SSD-5500 ultrasound machine with an ASU-1004 transducer (Aloka, Japan). Before analyzing breast density, an adaptive speckle reduction filter was used for removing speckle noise, and a robust thresholding algorithm was used to divide breast tissue into fatty or fibroglandular classifications. Then, the proposed approaches were applied for analysis. In the threshold-based method, a statistical model was employed to determine whether each pixel in the breast region belonged to fibroglandular or fatty tissue. The proportion-based method was based on three-dimensional information to calculate the volumetric proportion of fibroglandular tissue to the total breast tissue. The experimental cases were graded by the proposed analysis methods and compared with the ground standard density classification assigned by a majority voting of three experienced breast radiologists. For the threshold-based method, 28 of 32 US test cases and for the proportion-based density classifier, 27 of 32 US test cases were found to be in agreement with the radiologist "ground standard" mammographic interpretations, resulting in overall accuracies of 87.5% and 84.4%, respectively. Moreover, the concordance values of the proposed methods were between 0.0938 and 0.1563, which were less than the average interobserver concordance of 0.3958. The experiment result showed that the proposed methods could be a reference opinion and offer concordant and reliable quantification of breast density for the radiologist.