Search

A variety of cell elements are presented in this paper for the construction of frequency selective surface (FSS) backed reflectarrays. Among the cell elements are the conventional ring elements for FSS and slotted patch for the reflectarray. Different combinations of FSS cell elements and reflectarray cell elements are employed for the realization of FSS-backed reflectarrays and the criteria for the selection of the optimum structure are presented. Prototypes of these reflectarrays were fabricated and tested. The measurements demonstrated that for an optimum design, the gain of an FSS-backed reflectarray is about 1.0 dB lower than its counterpart backed by solid ground plane. Characterization of the out of band performance of these antennas demonstrated close to 1.0 dB insertion loss. Index Terms--Frequency selective surfaces (FSSs), quasi-optical measurement systems, reflectarray antennas.

Two new compact lens antenna configurations are presented and compared for data link communications with LEO satellites at 26 GHz. These lenses match a secant type radiation pattern template in the elevation plane while having a mechanically scanned sector beam in azimuth to enhance gain as much as possible. No rotary joints or multiple feeds are required and emphasis is put also on the compactness of the proposed solutions (< 6[[lambda].sub.o]). Two alternative lens configurations are evaluated numerically and experimentally: one is based on modified axial-symmetric dome lens geometry, and the other one consists of a full 3-D double-shell lens antenna. In contrast to current nearly omnidirectional antennas, the directivity of our lens prototypes is above 15.4 dBi. Up to 4.2 dB loss obtained in the prototypes can be significantly reduced by using lower loss dielectrics and matching layers, without affecting the conclusions. The numerical and experimental results are in good agreement with the radiation specifications given the compact size of the antennas. Index Terms--Beam shaping, compact lens antennas, constant flux illumination, scanning antennas.

A breadboard of a three-layer printed reflectarray for dual polarization with a different coverage in each polarization has been designed, manufactured, and tested. The reflectarray consists of three layers of rectangular patch arrays separated by a honeycomb and backed by a ground plane. The beam shaping for each polarization is achieved by adjusting the phase of the reflection coefficient at each reflective element independently for each linear polarization. The phase shift for each polarization is controlled by varying either the x or y patch dimensions. The dimensions of the rectangular patches are optimized to achieve the required phase shift for each beam at central and extreme frequencies in the working band. The reflectarray has been designed to produce a contoured beam for a European coverage in H-polarization in a 10% bandwidth, and a pencil beam to illuminate the East Coast in North America in V-polarization. The measured radiation patterns show that gain requirements are practically fulfilled in a 10% bandwidth for both coverages, and the electrical performances of the breadboard are close to those of a classical dual gridded reflector. Index Terms--Contoured beam, dual gridded reflector, dual polarization, multilayer, printed arrays, reflectarray.

A scale changing approach is proposed for the electromagnetic modeling of phase-shifter elements used in reconfigurable microelectromechanical system (MEMS)-controlled reflectarrays. Based on the partition of the discontinuity plane in planar sub-domains with various scale levels, this technique allows the computation of the phase shift from the simple cascade of networks, each network describing the electromagnetic coupling between two scale levels. The high flexibility of the approach associated with the advantages of the integral equations formulations renders this original approach powerful and rapid. The scale-changing technique allows quasi-instantaneous computing of the 1024 phase shifts achieved by ten RF-MEMS switches distributed on the phase-shifter surface. Moreover, the proposed approach is much better than the finite-element-method-based software in time costing. Experimental data are given for validation purposes. Index Terms--Multiscale structures, planar phase shifter, reflectarrays, RF microelectromechanical systems (MEMS).

We report the design of a directive antenna using the electromagnetic resonances of a Fabry-Perot cavity. The Fabry-Perot cavity is made of a ground plane and a single metallic grid. The resonance is excited by a patch antenna placed in the cavity at the vicinity of the ground plane. The two remarkable features of Fabry-Perot cavity antennas are, first, that they are very thin and second that only one excitation point is needed. A directivity of about 600 is measured at f = 14.80 GHz which is to our knowledge one of the highest directivities reported for an antenna using Fabry-Perot resonances. Index Terms--Directive antennas, Fabry-Perot resonators, leaky wave antennas.

A novel technique for feeding microstrip antenna arrays is proposed. It consists of a microstrip feed network designed to operate in dual standing and traveling-wave modes and provide uniform excitation to its elements with either mode. It, therefore, produces a uniform aperture distribution, regardless of the array element input impedances. The traveling wave propagates when radiating elements are matched, but resonant standing wave prevails if loads become mismatched. Since the feed network resonance does not alter the array excitation, it can be used in combination with the radiating patch resonance to broaden the impedance bandwidth. The physical reasons for such behaviors are explained and experimental verification are provided. The generalization of the concept to large arrays is also discussed. Index Terms - Microstrip arrays.