Search

Robotic grippers allow industrial robots to interact with the surrounding environment. However, control architectures of the grasping force are still rare in common industrial grippers. In this context, one or more sensors (e.g., force or torque sensors) are necessary. However, the incorporation of such sensors might heavily affect the cost of the gripper, regardless of its type (e.g., pneumatic or electric). An alternative approach could be open-loop force control strategies. Hence, this work proposes an approach for optimizing the open-loop grasping force behavior of a robotic gripper. For this purpose, a specialized robotic gripper was built, as well as its mathematical model. The model was employed to predict the gripper performance during both static and dynamic force characterization, simulating grasping tasks under different experimental conditions. Both simulated and experimental results showed that by managing the mechanical properties of the finger–object contact interface (e.g., stiffness), the steady-state force variability could be greatly reduced, as well as undesired effects such as finger bouncing. Further, the object’s size is not required unlike most of the grasping approaches for industrial rigid grippers, which often involve high finger velocities. These results may pave the way toward conceiving cheaper and more reliable open-loop force control techniques for use in robotic grippers.

The gripper is the far end of a robotic arm. It is responsible for the contacts between the robot itself and all the items present in a work space, or even in a social space. Therefore, to provide grippers with intelligent behaviors is fundamental, especially when the robot has to interact with human beings. As shown in this article, we built an instrumented pneumatic gripper prototype that relies on different sensors’ information. Thanks to such information, the gripper prototype was able to detect the position of a given object in order to grasp it, to safely keep it between its fingers and to avoid slipping in the case of any object movement, even very small. The gripper performance was evaluated by means of a generic grasping algorithm for robotic grippers, implemented in the form of a state machine. Several slip tests were carried out on the pneumatic gripper, which showed a very fast response time and high reliability. Objects of various size, shape and hardness were employed to reproduce different grasping scenarios. We demonstrate that, through the use of force, torque, center of pressure and proximity information, the behavior of the developed pneumatic gripper prototype outperforms the one of the traditional pneumatic gripping devices.

Wearable sensors are gaining in popularity because they enable outdoor experimental monitoring. This paper presents a cost-effective sensorised insole based on a mesh of tactile capacitive sensors. Each sensor’s spatial resolution is about 4 taxels/cm 2 in order to have an accurate reconstruction of the contact pressure distribution. As a consequence, the insole provides information such as contact forces, moments, and centre of pressure. To retrieve this information, a calibration technique that fuses measurements from a vacuum chamber and shoes equipped with force/torque sensors is proposed. The validation analysis shows that the best performance achieved a root mean square error (RMSE) of about 7 N for the contact forces and 2 N m for the contact moments when using the force/torque shoe data as ground truth. Thus, the insole may be an alternative to force/torque sensors for certain applications, with a considerably more cost-effective and less invasive hardware.