Search

The ability and specificity of various monocomponent endo-1-4-ß- xylanases to release negatively charged species from never-dried, bleached, birch kraft pulp was studied. The effects of dissolution of these xylan-based components on pulp filtrate properties and the subsequent chemical retention were determined. The results revealed that the amount of charged species released depended on the xylanase and that the ratio of charged species released to dissolved xylan is not linear. Chemical retention tests showed that high levels of dissolved xylan interfere with the fixation of colloidal species, which was confirmed by removing the dissolved hemicelluloses. The roles of residual hemicellulose and the properties of modified fibers on chemical retention and the level of internal sizing are discussed. [ABSTRACT FROM AUTHOR]

In this scale-up study, we examined the effects of using varying amounts of fibers with reduced xylan content in paper. Bleached birch kraft pulp was partially or fully replaced by alkali-extracted pulp, and the effects of this replacement on the wet end chemistry of the paper machine and the resulting paper properties were determined. Our results show that paper properties can be maintained or improved when optimizing the partial replacement of bleached birch kraft pulp with alkali-extracted pulp. The incorporation of alkali-extracted pulp in paper machine stock had a positive effect on first pass retention and retention of chemicals. However, careful optimization of chemical dosages is required because of the altered charge balance in the wet end. [ABSTRACT FROM AUTHOR]

In this pilot scale study, we examined the effects of alkaline extraction time on xylan removal, pulp and paper properties, and the consequences that need to be addressed when scaling up and intensifying the process. Alkaline extraction of bleached birch kraft pulp yields two fractions: pure polymeric xylan and pulp with reduced xylan content. Our results indicate that a similar amount of xylan can be extracted in 5 min as the amount obtained in 60 min. We found, however, that the shorter extraction time is beneficial to maintain the fiber and paper properties at an acceptable level. This pilot trial demonstrated that the washing procedure of the alkali-treated fibers must be selected with care to avoid causing mechanical damage to fibers and to avoid the loss of fines. [ABSTRACT FROM AUTHOR]