Search

Honey is a prebiotic food that has many health benefits. Honey contains oligosaccharides that can be used to protect sensitive bioactive compounds. The purpose of this study was to see how encapsulation affects the survival of probiotics under different conditions. L. rhamnosus GG was encapsulated with sodium alginate and honey. The study had three treatments: free probiotics (control), encapsulated probiotics with sodium alginate (MWS) and encapsulated probiotics with honey (MWH). The microcapsules were analyzed using morphology, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR). The survival of both free and encapsulated probiotics was tested under simulated gastrointestinal conditions and high temperatures. Encapsulation with honey had significantly higher encapsulation efficiency (97%) and the probiotics encapsulated with honey had a higher survival rate compared to free cells. In conclusion, adding honey to encapsulated probiotics can improve their viability and stability under stressful conditions. [ABSTRACT FROM AUTHOR]

Ohmic heating (OH) is a volumetric heating technique which emerged as an alternative to conventional heating in numerous sectors. Ohmic assisted extraction provides a potential approach to extract the valuable compounds from botanical origin and to get beyond the drawbacks of traditional extraction techniques. This novel technique proffers advantages such as increasing extraction efficiency, saving energy and time and remarkably enhances the quantity of heat labile and other bioactive compounds in the plant extracts. The present study provides a detailed overview of the applications of ohmic technology for extracting various compounds including essential oils, pectin, inulin, colors, juices and other bioactive substances from plant materials in comparison to conventional extractions. The principle of OH along with the factors affecting its functioning during extraction are outlined. The effects of this technique on the processing temperature, time, energy consumption, yield, and quantity of bioactive compounds in the extracts are discussed. Advantages of ohmic assisted extraction over conventional extraction techniques include high energy efficiency, short processing period, high extraction yield and better extract quality in terms of quantity of bioactive compounds and functional properties. Further research on safety and sustainability along with economic study are prerequisites for commercial application of this technology. [ABSTRACT FROM AUTHOR]

BACKGROUND RESULTS CONCLUSION Ready‐to‐eat snacks are very popular. However, they have a high glycemic index and lack proteins & micronutrients. This study prepared protein‐enriched corn extrudates by adding chickpea grit supplements at varying concentrations (0–100 g kg−1).The protein contents of 100 g kg−1 supplemented extrudates increased by 66.66% and dietary fiber contents increased by 48.02% in comparison with the control. Bulk density increased by 1.46 times. However, the expansion ratio, porosity, and water absorption index decreased significantly (P < 0.05). The health‐promoting characteristics of the extrudates increased in comparison with the control sample, i.e., total phenolic content increasing by 17.84%, 2,2‐diphenyl‐1‐picrylhydrazyl radical (DPPH) contents by 11.38%, and 2,2‐azinobis‐3‐ethylbenzothiazoline‐6‐sulfonic acid (ABTS) content by 9.59%. Likewise, the potassium contents increased by 24.63% with the inclusion of 10% chickpea in corn extrudates. Sensory evaluation revealed that corn extrudates with up to 60 g kg−1 added chickpea achieved the highest acceptability among panelists.The addition of chickpea produced corn extrudates with higher protein and mineral content, which could mitigate malnutrition. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Lycopene is a coloring substance with significant value as a natural food color, along with recognized medicinal and therapeutic properties. Fruit waste is produced in huge amounts by fruit processing industries. The extraction of lycopene from this waste is a promising strategy, for its application in food, pharmaceutical and cosmetic industries. This review summarizes the innovative techniques utilized for extracting lycopene from the waste of tomato, papaya, pink guava, seabuckthorn berries, and apricots. The goal is to assess the effectiveness of contemporary methods and underscore their ability to improve the sustainability and extraction efficiency of this valuable substance. Conventional extraction techniques have long been utilized for extracting this pigment from fruit waste materials, but these techniques have several drawbacks. Novel techniques such as ultrasound‐assisted extraction, microwave‐assisted extraction, pulsed electric field‐assisted extraction, enzyme‐assisted extraction, high hydrostatic pressure‐assisted extraction, and super‐critical fluid extraction provide higher extraction yields as compared to conventional extraction techniques, by using a smaller amount of solvents. These techniques offer improved efficiency, reduced extraction time, increased selectivity, minimized degradation, preserved bioactivity of lycopene, and environmental friendliness. [ABSTRACT FROM AUTHOR]

The increasing demands for safe and quality packaged food have diverted all the intentions toward the enhancement of hazard detection and quantification techniques. The integration of smart functions with the novel biomaterials‐based packaging provides an effective approach to deal with the uplifting concerns of food safety and environmental pollution. In the current study, firstly the cellulose was extracted from coconut waste, then it was subjected to prepare biodegradable films and lastly the films were incorporated with curcumin or quercetin dihydrate. The films were characterized for their mechanical, barrier and smart properties. The incorporation of curcumin or quercetin dihydrate improved the physicochemical properties of the cellulose films, including strength, elongation at break (EAB), water vapor permeability (WVP), biodegradability, antioxidant and antimicrobial activity. However, the moisture content and water solubility decreased. The scanning electron microscopy (SEM) images depicted the rough surface of curcumin incorporated smart films which represents successful application of curcumin, while cracks and pits were observed for the films with the higher concentration of quercetin dihydrate. All the smart films showed effective responses against pH ranging from 2 to 14. [ABSTRACT FROM AUTHOR]

Pistachio (Pistacia vera L.) is consumed in almost every part of the world enclosed in shells that are thrown out in baskets. Similarly, hulls separated from pistachio are discarded as waste in food processing industries. These waste materials contain functional constituents having immense industrial and nutraceutical applications. This review article summarizes the scientific investigations regarding the functional constituents and bioactive compounds in pistachio shells (PSs) and pistachio hulls (PHs). It also highlights the nutraceutical potential exhibited by functionally active compounds as well as their potential applications in various industries including nutraceutical, medicinal, and feed industries together with biosynthetic development of useful products and wastewater treatment. Pistachio waste (PW) comprising PS and PH is a rich source of various bioactive compounds. PS is full of lignin, cellulose, and hemicellulose. PH is an excellent source of carbohydrates (80.64 ± 0.98%) (including glucose, galactose, rhamnose, arabinose, xylose, mannose, galacturonic acid) as well as ash (6.32 ± 0.26%) and proteins (1.80 ± 0.28%) with small amounts of fats (0.04 ± 0.005%). Owing to its composition, PW can be beneficial in many nutraceuticals, including antioxidation, cytoprotection, anti-obesity, anti-diabetic, anti-melanogenesis, neuroprotection, anti-cancer, anti-mutagenesis, anti-inflammation, and anti-microbial. The waste materials have vast applications in the food industry, such as bio-preservation of oils and meat products, prevention of enzymatic browning in fruits, vegetables, and mushrooms, development of functional cereal and dairy products, production of food enzymes, emulsions, and manufacturing of biodegradable films for food packaging. The use of these waste products to develop and design novel functional foods with improved quality is important for both food industries and food sustainability. [ABSTRACT FROM AUTHOR]

Apple pomace, a byproduct of apple processing industry, possesses nutritional components which are of great interests for health aspects. Apple pomace is a good source of dietary fiber, minerals, carbohydrates, phenolic, and antioxidant compounds. These bioactive compounds can be extracted by different extraction techniques which have been comprehensively described in this review article. Furthermore, the incorporation of apple pomace as functional ingredients in different food products like bakery items, extrusion-based snacks, meat, dairy, and confectionary products to improve the commercial value and health benefits has been discussed briefly. This review article can be a helpful tool for industrialists, innovative researchers, and waste management authorities to manage the apple waste in an appropriate and sustainable way. [ABSTRACT FROM AUTHOR]

Fruits and vegetables have shorter shelf life due to their perishable nature. Tomato, being a nutritionally rich fruit needs to be preserved for a longer period. In this context, this study was designed to dry the tomato slices through microwave–vacuum drying. This process was optimized for moisture ratio and drying rate using response surface methodology (RSM). The process was investigated at different power levels (30, 50, 80, and 100 W), pressure (0, 15, 20, and 25 inHg), and time (0, 4, 6, and 10 min) using Box–Behnken design. Results indicated that color, energy efficiency, and drying characteristics were significantly affected by changing power, vacuum levels, and processing time. Besides, nine mathematical models were applied on experimental data to deeply understand the moisture ratio of tomato slices. Amongst, Midilli model was found best to describe the drying process at 100 W and 25 inHg supported by R2 (0.9989), RMSE (0.001), and X2 (1.34e−4). This study was focused on finding the optimal combinations of power, vacuum pressure, and time for better drying and reduced wastage of the fruit owing to its perishable nature. From all the microwave powers, higher microwave power and vacuum level showed better energy consumption, energy efficiencies, color retention, and rehydration capacity. [ABSTRACT FROM AUTHOR]

Summary: Donuts are the snack food which are coated with powdered seasonings to increase flavour and shelf life. In this regard, electrostatic coating is being developed for efficient coating method and to overcome uneven coating and dust production. During electrostatic coating, charged powder particles produce even coating on target surface. Electrostatic coating of cocoa powder was carried out at high voltage (0–20 kV) and the results were compared to manually coated fried donuts. Cocoa powder particles had irregular polygonal and polyhedral shapes with an average particle diameter (18.12 ± 0.91 μm). The values of adhesion, dust reduction and transfer efficiency were higher at 15 kV and lower values at 0 kV. Coated sample at 15 kV showed the lowest change in weight loss (05.99%) during the storage. Due to an even coating of cocoa powder at 15 kV, donuts exhibited pleasant taste, uniform and dark brown colour. While, shelf life of coated donuts at 15 kV lasts up to 29 days as compared to other samples. It can be concluded from the results that the electrostatic coating of donuts with cocoa powder was best at 15 kV with higher transfer efficiency, adhesion and consumer acceptability. [ABSTRACT FROM AUTHOR]

In this study, grape juice was concentrated through a microwave vacuum-assisted technique. The concentrate was prepared at different powers (30, 50, 80 W) and vacuum pressures (35, 50, 70 kPa) for different time intervals to optimize the processing conditions. The highest evaporation rate (5.32 g/100 g min) and the lowest moisture ratio (0.18) were observed at a higher level of microwave power (80 W) and vacuum pressure (70 kPa). Moreover, different mechanistic models were used to predict the values of the moisture ratio. Among them, the Midilli (R2 = 0.999, SSE = 1.970 × 10−8, RPD = 0.012%) model best fits the experimental values. The effective diffusivity (1.69 × 10−14 m2/s), activation energy (1.56 W/kg), and extraction yield (69.30%) possessed maximum values at 80 W and 70 KPa. While concentrate had exhibited higher antioxidant activities (77.2%) than fresh juice (25.28%) at 30 W. Overall results indicated that the microwave-vacuum technique had significantly reduced the processing time and energy requirement. [ABSTRACT FROM AUTHOR]

The flavor is an essential organoleptic trait of meat, affecting its acceptability and delectability towards consumers. Flavor, in the meat, is formed through thermally produced reactions, including vitamin degradation, maillard reaction and lipid oxidation. Such reactions lead to the development of meat flavor with some bloody taste and aroma during cooking. However, adverse effects like discoloration, cooking loss, hard texture, and flavor loss can occur due to conventional cooking. Currently, some novel thermal and non‐thermal processing techniques are being explored with the promise to ensure mild processing. Owing to their milder processing conditions, such methods can effectively improve the flavor together with improved nutritional value of meat and meat products. This review discusses the application and optimization of various thermal and non‐thermal processing techniques in meat processing with special focus on development and preservation of meat flavors. Novelty impact statement: Conventional cooking has adverse effects on the meat quality and its organoleptic attributes. However, applications of non‐thermal processing techniques have been explored to ensure mild processing's and flavor formation. Optimization of various thermal and non‐thermal processing techniques with special focus on development and preservation of meat flavors is of industrial importance. [ABSTRACT FROM AUTHOR]

From the past decade, consumption of ready‐to‐eat food and ease of access to fast food increased the onset of several diseases. Thus, there is a need to shift the trend from consumption of unhealthy food item to natural and healthy alternatives. In this context, fruits can be considered as functional food, which have ability to provide essential nutrients and bioactive compounds. These compounds when consume in adequate amount would have the potential to lower the onset of diseases. In this regard, Phoenix dactylifera or date fruit is an important source of functional carbohydrates and bioactive compounds for their use as functional foods. The major functional carbohydrate in date fruit are in the form of dietary fiber, such as β‐glucan, cellulose and fructans along with other bioactive compounds. Additionally, it is also a good source of other important nutrients such as sugars, minerals, along with minor quantities of proteins and lipids. Due to these functional compounds, date fruit have shown a wide range of pharmaceutical properties such as antioxidant, anti‐inflammatory, anti‐diabetic, hepatoprotective and anticancer. This review provides latest information regarding functional and nutraceutical carbohydrates of date fruits along‐with mechanism of action on different diseases reported in recent years. Practical applications: This will provide information to food industries for the development of innovative food products by using date fruit. Moreover, bioactive components from date fruit may prove to enhance global health and wellness. However, further research is needed on clinical trials for the development of functional food products by using date fruit for functional foods and pharmaceutical applications. [ABSTRACT FROM AUTHOR]

Extraction is a separation technique for bioactive compounds from food samples that are used as an active ingredient in pharmaceutical, and food manufacturing industries. There is now an ever-increase demand for these bioactive compounds in different food products that encourage the development of new extraction techniques. Various novel thermal and non-thermal extraction techniques, i.e. microwave-assisted-extraction, ultrasound-assisted-extraction, pressurized liquid extraction, pulsed electric field assisted-extraction, and supercritical fluid extraction that have been intensively investigated. These advanced extraction techniques are more efficient in comparison to conventional methods in terms of solvent consumption, extraction time and energy cost. The efficiency of these extraction methods depends upon the input parameters and target bioactive compounds. This review discusses the application of these different extraction techniques, basic mechanisms and limiting factors for the extraction of bioactive compounds through different food matrix. This review also emphasises on cost-effectiveness, energy consumption, sustainability, advantages and disadvantages of these extraction techniques. [ABSTRACT FROM AUTHOR]

Electrostatic coating is being developed as an attractive alternative to overcome the problems encountered during conventional coating which includes non‐uniform coating, dust generation, high energy and time consuming, equipment cleaning, and operating expenses. In this method, powder particles are charged by passing through an ion‐rich region, which repel each other to produce an evenly distributed coating. This results in a uniform distribution of powder on target surface. In this study, the electrostatic coating of black pepper powder was applied by varying the applied voltage (0–20 kV), at a conveyor belt speed of 10 m/s and compared with manually coated cheese slices. The values of transfer efficiency (52.7%–87.0%), dust reduction (76.2%–85.8%), and adhesion (20.8%–85.3%) were higher for electrostatic coatings. The weight losses were lower (0.19%) at 15 kV as compared to 20 kV (0.67%). The total plate count of cheese slice coated at 20 kV was significantly higher (p < 0.05), whereas at 15 kV it was lower than all other treatments. The shelf life of coated cheese slices at 15 kV lasted up to 1 month due to better coating compared to other treatments. From the results, it can be concluded that electrostatic coating of cheese slice with black pepper is best at 15 kV along with higher transfer efficiency and dust reduction. Practical Application: Electrostatic powder coating of cheese resulted in higher transfer efficiency and reduction in dust production. later one has reduce the coating material requirement, thereby, reducing the processing cost. Moreover, dust reduction will reduce the burden of cleaning cost of environment and enhance worker health. [ABSTRACT FROM AUTHOR]

Thermal treatment can initiate the production of some undesirable compounds in foods during processing. Acrylamide is one among such compounds that is produced (in starch-rich foods) as a result of Maillard reaction between reducing sugars and free amino acids. Acrylamide has gained much attention owing to its wide occurrence, dietary exposure, and toxicity. Its formation mechanism and mitigation has been an area of interest for numerous researchers since its discovery in foods. Some reviews have already been published on acrylamide where its formation and mitigation has been discussed with reference to some specific group of foods and/or some specific mitigation technique. In others, the mitigation section does not cover all the aspects of acrylamide attenuation reported in the literature. The present paper provides the updated and comprehensive information on formation, occurrence, dietary exposure, toxicity, and mitigation of acrylamide in foods during processing. [ABSTRACT FROM AUTHOR]

Nanoemulsion-based delivery systems have a considerable potential for the encapsulation, protection and delivery of lipophilic bioactives. In the current study, in-vitro stability of curcumin-loaded single (NEI), double (NEII), and triple-layered nanostructures was investigated against varying environmental stress (temperature, pH, ionic strength) and storage conditions. In addition, their functional performance, as influenced by the number of polymer layers, was also assessed by comparing in-vitro lipid digestibility and curcumin bioaccessibility. Initially, NEI was prepared through ultrasonic homogenisation technique, and stabilised with modified starch. Next, sequential deposition of chitosan and carboxymethyl cellulose (CMC) on the NEI droplets resulted into the formation of NEII and nanocapsules, respectively. Nanocapsules showed good stability against aggregation over a wide range of pH (3.0–7.0), salt concentration (50–300 mM NaCl) and temperature (30–90 °C for 30 min). Digestion studies suggested that polymeric coatings interfered with lipolysis as the digestibility (% free fatty acid released) of oil droplets was considerably reduced with increasing the number of layers surrounding the oil droplets. However, curcumin bioaccessibility increased with adding the number of coating layers. Overall, results indicate that the developed nano-system could be helpful in improving the oral delivery of curcumin besides incorporating it into functional foods and beverages. [ABSTRACT FROM AUTHOR]

The demand of food packaging has increased along with the food consumption. Among all types of packaging materials plastics are most commonly used owing to their good mechanical, barrier and permeability characteristics. However, plastics are totally non-biodegradable and their raw materials come from non-renewable resources. This has urged the researchers to explore biodegradable food packaging films from renewable resources. Natural polymers such as carbohydrate, starch, cellulose, hemicellulose or pectin can be effectively used for the synthesis of biodegradable food packaging films. Fruits and vegetables processing industries are producing huge amount of waste in the form of peels, seeds and pomace. Being rich source of biopolymers, these wastes can serve as a good source of raw material for synthesis of biodegradable packaging films. In the present research, three types of food industrial wastes (potato, citrus and apple residues) were used with varying glycerol concentrations to develop biodegradable food packaging films. The prepared films were analyzed on the basis of their thickness, water vapor permeability (WVP), opacity, mechanical properties and photo oxidation. Results showed that potato residue film was thicker (0.17 mm) and more opaque (97.45 AU nm) in comparison with citrus and apple residue films. Results for mechanical properties showed that potato residue film possessed greater tensile (8.99 MPa) and puncture strength (13.78 N). However, it exhibited lower elongation at break (9.54 %) compared to citrus and apple residue films. While citrus residue film showed higher elastic modulus compared to potato and apple residue films. Water vapor permeability of all the prepared films was comparable. Increased glycerol concentration in film forming solutions resulted in the increase in thickness, opacity, water vapor permeability and elongation at break of all the films. However, increased glycerol concentration caused a decrease in tensile strength, elastic modulus and puncture strength of all the films. The structure of organic compounds present in prepared biodegradable films was evaluated using Fourier Transform Infrared Spectroscopy (FTIR) technique. [ABSTRACT FROM AUTHOR]

The aim of the present study was to evaluate the upshot of microencapsulation on the stability and viability of probiotics in carrier food (ice cream) and simulated gastrointestinal (GIT) conditions. Purposely, Lactobacillus casei was encapsulated with two different hydrocolloids, that is, calcium alginate (Ca‐ALG) and whey protein concentrate (WPC) by using encapsulator. The obtained microbeads were characterized in terms of encapsulation efficiency and morphological features. Afterward, the probiotics in free and encapsulated form were incorporated into ice cream. The product was subjected for physicochemical, microbiological, and sensory attributes over a storage period of 80 days. Microencapsulation with both hydrogels significantly (p <.05) improved the viability of probiotics in both carrier food and simulated GIT conditions.The initial viable count of probiotics encapsulated with Ca‐ALG and WPC was 9.54 and 9.52 log CFU/ml, respectively, that declined to 8.59 and 8.39 log CFU/ml, respectively, over period of 80 days of storage. While nonencapsulated/free cells declined from 9.44 to 6.41 log CFU/ml during same storage period. Likewise, during in vitro GIT assay, encapsulated probiotic with Ca‐ALG and WPC showed 0.95 and 1.13 log reduction, respectively. On other hand, free probiotics showed significant 3.03 log reduction. Overall, microencapsulated probiotic exhibited better survival as compared to free cells. Moreover, the amalgamation of encapsulated and free probiotics affected the physicochemical (decrease in pH and increase in viscosity) was and sensory parameters of ice cream during storage. [ABSTRACT FROM AUTHOR]

The core objective of the current study was to evaluate the effect of microencapsulation on the viability and stability of probiotic bacteria in yogurt and simulated gastrointestinal conditions. For this purpose, probiotic bacteria were encapsulated with sodium alginate and carrageenan by encapsulator. Yogurt was prepared with the incorporation of free and encapsulated probiotic bacteria and was analyzed for physicochemical, microbiological, and sensorial attributes. Encapsulation and storage exhibited a significant (p <.05) effect on different parameters of yogurt. An increasing trend in syneresis and acidity while a decreasing trend in viscosity, pH, viability, and stability were observed. The value of syneresis increased from 2.27 ± 0.17 to 2.9 ± 0.14 and acidity from 0.48 ± 0.04 to 0.64 ± 0.01 during 4 weeks of storage. The value of viscosity decreased from 3.68 ± 0.21 to 2.42 ± 0.09 and pH from 4.88 ± 0.31to 4.43 ± 0.36 during 28 days of storage. Unencapsulated (free) cells exhibited poor survival. The viable cell count of probiotic bacteria in the free‐state in yogurt was 9.97 logs CFU/ml at zero‐day that decreased to 6.12 log CFU/ml after 28 days. However, encapsulation improved the viability of the probiotics in the prepared yogurt and GIT. The cell count of probiotics encapsulated with sodium alginate and carrageenan was 9.91 logs CFU/ml and 9.89 logs CFU/ml, respectively, at zero‐day that decreased to 8.74 logs CFU/ml and 8.39 log CFU/ml, respectively. Free cells (unencapsulated) showed very poor survival. Similarly, during in vitro gastrointestinal assay, the survival rate of encapsulated probiotic bacteria in simulated gastric solution and intestinal solutions was higher than that of free cells. In the case of encapsulated bacteria, only 3 logs while for free cells, 7 log reduction was recorded. Sodium alginate microcapsules exhibited better release profile than carrageenan. Conclusively, microencapsulation improved the survival of probiotic bacteria in carrier food as well as in simulated gastrointestinal condition. [ABSTRACT FROM AUTHOR]

The present study was designed to evaluate the effect of two different drying methods, that is, spray drying and oven drying on physicochemical and nutritional attributes of date flesh powder of dhakki, aseel, and rabi varieties. Date powders were prepared using mixture of maltodextrin and acacia gum (50:50) as drying aid at the rate of 0.4 kg per 1.0 kg of date fruits (dry weight basis). The oven‐drying conditions were 60°C for 48 hr, whereas in spray drying, flow rate of 30 ml/min at 150°C was maintained. Date powder was obtained in both treatments from three varieties. Nutritional profile in all six powders was explored specifically with quantification of sugars using HPLC‐RI, followed by physicochemical characterization. The total phenolic compounds, color (L*a*b* values), hygroscopicity, bulk density, wettability, solubility index, and glass transition temperatures (using differential scanning calorimetry, DSC), were determined for the date powders. The nutritional profile and total phenolic contents and sugars (sucrose, fructose, and glucose) were significantly different for the varieties, while treatments showed insignificant effect. The physicochemical characteristics of date powder varied significantly with respect to the date varieties. The colored values were affected due to treatments also, and the spray‐dried powders showed better color values. The drying methods also showed effects in some parameters such as wettability time. Similarly, bulk density was different in both treatments for rabi and aseel. The glass transition temperatures were significantly varied in varieties due to difference in sugar contents, but within the treatments, they remain unaffected. The highest glass transition temperature of spray‐dried rabi was 53.2 ± 1.31°C. [ABSTRACT FROM AUTHOR]

Improved awareness regarding diet and health linkages has motivated researchers to give more attention to the health perspectives of individual foods. During the previous two decades, the global dairy industry diverted its interest from simple processing of commodities to the value addition. A significant income is being earned in the dairy industry from specialty proteins. Pakistan ranked 3rd in milk production worldwide and different milking animals e.g. cow, buffalo, goat and camel should be studied for their potential for generating new health-promoting diets and nutraceuticals foods. Bioactive proteins and peptides from having abundant applications including an antimicrobial food additive, dietary supplements, functional foods and nutraceuticals. Proteins from milk have a balanced composition of amino acids promising novel functional products. These also enhance the consistency and sensorial characteristics of various dairy products. Amongst, lactoferrin reveal bacteriostatic as well as bactericidal bustle against a variety of microorganisms. It binds iron thus depriving it required for growth like L. monocytogenes, Salmonella spp, Escherichia coli, Bacillus stearothermophilus, Shigella dysenteriae and Bacillus subtilis. Lactoferrin executes as an alternative to antibiotics. It acts as a natural antimicrobial for bio preservation ranging from dairy, meat, seafood, beverages, bakery products, acne care, infant formulas, extending shelf life, ensuring safety and improving health by acting against life-threatening diseases like cancer, hepatitis, respiratory infections, and foodborne diseases in infants, children and adults etc. In the nutshell, the current review discusses the importance and safety perspectives of lactoferrin in the food industry as well as the health sector. [ABSTRACT FROM AUTHOR]

There is a continuous need for thin edible coatings with excellent barrier properties, which has resulted in the quest for new coating methods. Electrospraying is a novel coating technique that is known to yield fine droplets of size down to 20 μm and even smaller ones, giving the potential of ultra-thin and uniform coatings. In this review, various process parameters are discussed that influence the coating quality and efficiency for electrospraying. The droplet size during the spraying process is a function of operational parameters and liquid properties. Successful deposition of thin films has been reported for model (conductive and non-conductive) surfaces (aluminium, Parafilm and various membranes) as well as food surfaces (apple and candies). This review article is an attempt to summarize valuable information about process optimization for food applications. The existing scaling relations are presented here relating various process and product-related parameters. [ABSTRACT FROM AUTHOR]

We investigated the formation of food foams using a novel packed bed system at different operating pressures. The foaming process was based on simultaneous injection of continuous (whey protein solution) and dispersed (nitrogen gas) phases into a column containing a packed bed of glass beads. Bubbles were produced by entrapment of nitrogen by thin films of continuous phase inside the porous medium. Initial results show a proof of principle that the proposed system can be an effective method for the controlled production of foams at overruns of up to 600%. The entire window of operation regarding all process and formulation possibilities is expected to be much wider but needs to be established in future research. [ABSTRACT FROM AUTHOR]

The main focus of our research was to study the distribution of inkjet printed biomolecules in porous nitrocellulose membrane pads of different brands. We produced microarrays of fluorophore-labeled IgG and bovine serum albumin (BSA) on FAST, Unisart, and Oncyte-Avid slides and compared the spot morphology of the inkjet printed biomolecules. The distribution of these biomolecules within the spot embedded in the nitrocellulose membrane was analyzed by confocal laser scanning microscopy in the "Z" stack mode. By applying a "concentric ring" format, the distribution profile of the fluorescence intensity in each horizontal slice was measured and represented in a graphical color-coded way. Furthermore, a one-step diagnostic antibody assay was performed with a primary antibody, double-labeled amplicons, and fluorophore-labeled streptavidin in order to study the functionality and distribution of the immune complex in the nitrocellulose membrane slides. Under the conditions applied, the spot morphology and distribution of the primary labeled biomolecules was nonhomogenous and doughnut-like on the FAST and Unisart nitrocellulose slides, whereas a better spot morphology with more homogeneously distributed biomolecules was observed on the Oncyte-Avid slide. Similar morphologies and distribution patterns were observed when the diagnostic one-step nucleic acid microarray immunoassay was performed on these nitrocellulose slides. We also investigated possible reasons for the differences in the observed spot morphology by monitoring the dynamic behavior of a liquid droplet on and in these nitrocellulose slides. Using high speed cameras, we analyzed the wettability and fluid flow dynamics of a droplet on the various nitrocellulose substrates. The spreading of the liquid droplet was comparable for the FAST and Unisart slides but different, i.e., slower, for the Oncyte-Avid slide. The results of the spreading of the droplet and the penetration behavior of the liquid in the nitrocellulose membrane may (partly) explain the distribution of the biomolecules in the different slides. To our knowledge, this is the first time that fluid dynamics in diagnostic membranes have been analyzed by the use of high-speed cameras. [ABSTRACT FROM AUTHOR]

The effect of the application of chitosan–Aloe vera coatings emulsified with beeswax (0, 0.5, 1, 1.5 and 2%) during storage of Mangifera indica L. (cv Anwar Ratol) was investigated. Particle size of emulsions was reduced significantly with an increase in beeswax concentration. Water vapor permeability of the coatings was reduced by 43.7% with an increase in concentration of beeswax to 2%. The coated mangoes (at all concentrations of beeswax) exhibited reduced weight loss, delayed firmness loss, minimized pH change, maintained the total soluble solid contents, and retained free radical scavenging activity and total phenolic contents when stored at 18 °C and 75 ± 5% R.H. The best results were produced with a formulation containing 2.0% beeswax. Antimicrobial properties of chitosan and Aloe vera coatings were also improved with an increase in beeswax concentration and remarkably reduced the disease incidence in mangoes. In conclusion, beeswax-emulsified chitosan–Aloe vera coatings can be effectively used to increase the shelf life and marketable period of mangoes. [ABSTRACT FROM AUTHOR]

Highlights: [•] EDGE emulsification as a function of dispersed phase contact angle was investigated. [•] Monodispersed o/w emulsions were successfully prepared at contact angles above 100°. [•] Decrease in contact angle improved the plateau filling and system efficiency. [•] Pressure stability of the system increased significantly below 150°. [•] Improved efficiency and pressure stability resulted in increased productivity. [ABSTRACT FROM AUTHOR]