Search

Scanning microscopic imaging has become a valuable research tool in micromorphology with improved techniques playing an important role in analysing the ultrastructure of leaf specimens. The foliar epidermal anatomy of 25 selected poisonous plants with special emphasis on stomata and trichomes was reported using microscopic techniques, for instance, light micrographs (LMs) and scanning micrographs (SEMs). This study aimed to investigate micromorphologies of studied species that are helpful for the identification of poisonous plants. Plants were collected, pressed, dried, identified and then analysed for microscopic study. For making microscopic slides, 1 or 2 leaves were taken in a test tube and dipped in 30% nitric acid and 70% lactic acid for few minutes, and then placed on petri plates for separating the epidermis. Numerous quantitative and qualitative foliar anatomical features of adaxial and abaxial surfaces, including epidermal cell shapes, stomata size, subsidiary cell size, the pattern of the anticlinal wall, the morphology of the stomatal complex and trichome diversity, were examined. A small number of the considered species had anomocytic and anisocytic stomata; a few species had paracytic stomata, for instance, Ricinus communis, Euphorbia royleana, Buxus pilosula and Sorghum halepense; and only Ipomoea carnea had cyclocytic stomata in the studied taxa. The epidermal cells of the analysed species were irregular, while some exhibited polygonal, wavy, tetragonal and elongated cell morphologies. Overall, this study emphasises the significance of foliar micromorphology analysis as a valuable resource for identifying potentially poisonous plants and demonstrates its contribution to maintaining public welfare, thereby benefitting public health and safety.

This study aimed to examine the pollen and pollinia morpho-structure of 18 horticultural Apocynaceous species. Advanced light and scanning electron microscopy (LM and SEM) were used to elaborate on and examine the systematic importance of pollen and pollinia micromorphology. Pollen grains were first acetolysed, which was followed by visualisation of their sculpturing features. The quantified data were subjected to statistical tools to elucidate dendrogram clustering and principal component analysis to reveal pollen/pollinia morphotypes. The size of pollen is variable, ranging from 113.45 μm in Cascabela thevetia to 23.4 μm in Alstonia scholaris. The study revealed tetrad, tetraporate, and tricolporate grains. Sculpturing (exine ornamentation) varies from reticulate perforate to reticulate. Pollinum shape was observed to be narrow oblong, obovate, orbicular, and reniform. Reticulate-psilate sculptural features were prominent among pollinia surfaces. Based on examination, it was ascertained that the minimum exine thickness in Periploca aphylla was 4.9 μm, whereas the corresponding number in Cryptolepis dubia was 1.35 μm. Taxonomic identification keys were constructed separately based on pollen/pollinia characters to identify the Apocynaceous taxa. In the presented study, seven pollen shapes were observed: from oblate to per prolate. The findings confirm that morphopollinic traits differ amongst genera of Apocynaceous species. However, these features can be used to distinguish the Apocynaceous taxa. The results show that structural characteristics of pollen and pollinia can help accurately identify Apocynaceous species.

The study presents biological characteristics of the major apple pests in Uzbekistan. For evaluating the key insects, field observation has been conducted. The in-situ results have identified six major apple pests in three selected research areas of the province. Thus, in this study, the biological behavior and potential harm of the determined pests on apple trees are provided. This field-based investigation helps to establish an integrated method to fight against those harmful pests and their devastating influence.

The article presents the results of the research conducted in Uzbekistan in 2020-2023 on the bioecological characteristics and importance of European Bee-eater - Merops apiaster and Blue-cheeked Bee-eater - Merops persicus. The purpose of this study is to determine and assess the distribution, number and dynamics of M. apiaster and M. persicus in Uzbekistan, factors controlling their reproduction, nutrition, importance in nature and in bee farms, to experiment with effective methods to prevent biodamage caused by bee-eaters to bee farms and to protect them. As a result, recommendations are being developed to protect these species and prevent their bio-damaging activity. Zoological, ecological, questionnaire, statistical and comparative analysis methods were used in the research. The scientific novelty of the research is as follows: distribution characteristics of Merops species in Uzbekistan, their number and dynamics in biotopes, and abiotic and biotic factors controlling them were determined; the reproductive cycle of woodpeckers, their nesting places, the structure of their nests, the passage of reproduction stages, the efficiency of reproduction and the environmental factors affecting it were determined; changes in the nutritional composition and trophic relations of the species were determined in accordance with the reproductive and post-reproductive cycles; it has been proven that bee- eaters increase in stomach mass and accumulation of fat in the stomach and internal organs are the results of hyperphagia and lipogenesis events that occur in preparation for autumn migration; the importance of M. apiaster and M. persicus in nature and in bee farms was evaluated and their participation in various biocenotic relationships was revealed; the bioacoustic repellent “Merops – distress signal” was developed and its effectiveness in controlling the behavior of bee-eaters was proven by testing; appropriate recommendations for reducing the participation of Merops in biodamage in bee farms and their protection were developed.

The article presents the analysis of astragalus L. species distributed in the flora of the sands of Uzbekistan. According to the analysis pf herbarium specimens stored in the unique scientific facility of the National Herbarium of Uzbekistan (NHU), scientific resources, and the results of field-based research, it has been found for the first time that 33 varieties of psammophilous species grow in the sandy areas.

Despite its millennial existence and empirical documentation, the ethnological knowledge of herbs is a more recent phenomenon. The knowledge of their historical uses as food, medicine, source of income and small-scale businesses, and the sociological impacts are threatened due to the slow ethnobotanical research drive. Species of the genus Solanum have long been extensively used in folk medicine to treat various illnesses of humans since the dawn of civilization. All data were systematically obtained from papers, monographs, and books written in Uzbek, Russian, and English through various scientific online databases, including Google, Google Scholar, PubMed, Scopus, Semantic Scholar, Science Direct, and Web of Science using specific keywords focused on eight Solanum species. Eight native and non-native Solanum species as S. dulcamara L., S. lycopersicum L., S. melongena L., S. nigrum L., S. rostratum Dunal., S. sisymbriifolium Lam., S. tuberosum L., and S. villosum Mill. have been recorded in Uzbekistan of Central Asia. In this article we presented recently obtained data on the diversity, morphological characteristics, global distribution, habitat, population status, phenology, reproduction, pharmacology and phytochemistry of these Solanum species in Uzbekistan. Furthermore, relying on a combination of literature reviews and analyses from various scientific papers, we focus on food consumption coupled with global ethnobotanical and ethnopharmacological uses in human diseases of the Solanum species growing in Uzbekistan. Since the dawn of civilization, these eight cultivated and non-cultivated species of Solanum have provided sustainable resources of medicinal plants in Uzbekistan to prevent and treat various human diseases. Based on the collected data, it was shown that Solanum species have not been studied ethnobotanically and ethnomedicinally in Uzbekistan and it is necessary to conduct phytochemical and biotechnological research on them in the future. Traditional uses and scientific evaluation of Solanum indicate that S. nigrum, S. sisymbriifolium and S. tuberosum are one of the most widely used species in some parts of the world. Although considerable progress has been made to comprehend the chemical and biological properties of S. nigrum and S. tuberosum species, more research on the pharmacology and toxicology of these species is needed to ensure the safety, efficacy, and quality of their biologically active extracts and isolated bioactive compounds. Additionally, conducting additional research on the structure-activity relationship of certain isolated phytochemicals has the potential to enhance their biological efficacy and advance the scientific utilization of traditional applications of Solanum taxa. [ABSTRACT FROM AUTHOR]

The green chemistry method for nanocatalyst synthesis along with environmentally feasible non-edible sources are promising alternatives to fossil fuels. The current study focuses on the synthesis of copper oxide phyto-nanocatalyst and the identification of a new renewable feedstock, Citrullus colocynthis, to reduce environmental pollution. The highest biodiesel yield (95%) was obtained under optimum conditions of a 1:8 oil-to-methanol ratio and reaction temperature of 85 °C for 120 min with a 0.365 wt% catalyst concentration. The phyto-nanocatalyst was synthesized using seed oil cake after extracting oil with the salt of copper (copper oxide). The catalyst was then subjected to various analyses, namely, EDX, FT-IR, SEM, and XRD. The catalyst was proved to be efficient and effective after being reused five times and still there was a very small difference in biodiesel yield. All the analyses also show sustainable and stable results. Thus, copper oxide phyto-nanocatalyst with non-edible Citrullus colocynthis proved to be highly effective, sustainable, and a better alternative source to the future biodiesel industry. [ABSTRACT FROM AUTHOR]

Recently, intensifying energy crises accompanying ecological crises due to the decline in fossil-fuel reserves and extensive greenhouse gas emissions have triggered the exploration of renewable substitutes for petro-diesel. In this scenario, biodiesel is the best alternative to non-renewable finite conventional fuels due to its cost-effectiveness, sustainability, renewability, biodegradability, and eco-friendly nature. Hence, the current research was designed to utilize scanning electron microscopy to investigate and identify the micro-morphological characteristics of selected seed-bearing crops. Light-microscopy (LM) indicated discrete variations in macro-morphological characters such as seed shape (ovoid, ovate, oblong, semi-spheroid, or discoid), seed size (3.5–14 mm in length and 2.25 to 6.5 mm in width), seed color (yellow to black), and number of seeds per kilogram (from 6000 to 260,000). Chemical extraction via Soxhlet apparatus resulted in the estimation of oil content within the range of 20.3–48.0% (wt./wt.), FFA content (0.63–6.91 mg KOH/g), and maximum product, i.e., 98% biodiesel yield was achieved. Multivariate analysis via principal component analysis (PCA) was done using PAST 3 software to investigate similarities and differences among factors/variables. SEM examination exhibited ultra-morphological characters and distinct variation in cell-wall ornamentation; hilum occurrence, position, and level; wall-sculpturing variations such as ruminate, verrucate, wrinkled, or striate; cell arrangement (anticlinal or periclinal); and cell shape and margins. To conclude, SEM could be an advanced technique to disclose the ultra-micromorphological characteristics of oil-bearing energy crops providing a convenient way for scientists to determine correct identification, authentication, and classification. [ABSTRACT FROM AUTHOR]

The current study focuses on the synthesis of Cerium oxide (CeO2) nanocatalyst via Tragacanth Gum (TG) using the wet impregnation method and its application for sustainable biodiesel production from a novel, non-edible Descurainia sophia (L.) Webb ex Prantl seed oil. The D. sophia seed oil has higher oil content (36 wt%) and free fatty acid (FFA) value (0.6 mg KOH/g). Innovative analytical methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy, were used to characterize the newly synthesized, environmentally friendly, and recyclable CeO2-TG phytonanocatalyst (FT-IR). The results show that the CeO2-TG phytonanocatalyst was 22 nm in diameter with a spherical shape outer morphology, while the inner structure was hexagonal. Due to low FFA content, the D. sophia seed oil was pretreated and transesterified via a single step. Using varying parameters, the optimized process variables were determined via Response Surface Methodology (RSM). The optimum process values were 8:1 methanol to oil molar ratio, 0.3 wt% catalyst concentration, 90 °C temperature, and reaction time of 210 min with 98% biodiesel yield. The recently created phytonanocatalyst was reliable and effective, with three times reusability in the transesterification reaction. Thin layer chromatography (TLC), FT-IR, gas chromatography–mass spectroscopy (GCMS), and Nuclear magnetic resonance (NMR) analyses were used to characterize the synthesized biodiesel. Physico-chemical properties of D. sophia biodiesel, i.e., Kinematic viscosity (4.23 mm2/s), density (0.800 kg/m3), pour point (−7 °C), cloud point (−12 °C), and flash point (73.5 °C) agree well with international biodiesel standards (ASTM-6751, 951), (EU-14214), and China (GB/T 20828) standards. The results show that the synthesized nanocatalyst demonstrated remarkable stability, indicating a bright future for industrial biodiesel production from low-cost feedstock. [ABSTRACT FROM AUTHOR]