Search

This paper presents, a novel cactus shaped frequency reconfigurable antenna for sub 10 GHz wireless applications. PIN diode is utilized as an electrical switch to achieve reconfigurability, enabling operation in four different frequency ranges. In the switch ON state mode, the antenna supports 2177-3431 and 6301-8467 MHz ranges. Alternatively, the antenna resonates within 2329-3431 and 4951-6718 MHz while in the OFF state mode. Radiation efficiency values, ranging from 68% to 84%, and gain values, ranging from 1.6 to 4 dB, in the operating frequency bands. the proposed antenna satisfy the practical requirements and expectations. The overall planner dimensions of the proposed antenna model is 40 × 21 mm2. Moreover, the measurement results from the prototype support the simulation results. Based on the frequency ranges supported by the antenna, it can be used for multiple wireless standards and services, including Worldwide interoperability and Microwave Access (WiMAX), Wireless Fidelity (Wi-Fi), Bluetooth, Long Term Evolution (LTE) and satellite communications. This increases its applicability for use in mobile terminals. [ABSTRACT FROM AUTHOR]

A compact, reconfigurable antenna supporting multiple wireless services with a minimum number of switches is found lacking in literature and the same became the focus and outcome of this work. It was achieved by designing a Th-Shaped frequency reconfigurable multi-band microstrip planar antenna, based on use of a single switch within the radiating structure of the antenna. Three frequency bands (i.e., 2007-2501 MHz, 3660-3983MHz and 9341-1046 MHz) can be operated with the switch in the ON switch state. In the OFF state of the switch, the antenna operates within the 2577-3280MHz and 9379-1033MHz Bands. The proposed antenna shows an acceptable input impedance match with Voltage Standing Wave Ratio (VSWR) less than 1.2. The peak radiation efficiency of the antenna is 82%. A reasonable gain is obtained from 1.22 to 3.31 dB within the operating bands is achieved. The proposed antenna supports UniversalMobile Telecommunication System (UMTS)-1920 to 2170 MHz, Worldwide Interoperability and Microwave Access (WiMAX)/Wireless Broadband/(Long Term Evolution) LTE2500-2500 to 2690 MHz, Fifth Generation (5G)-2500/3500 MHz, Wireless Fidelity (Wi-Fi)/Bluetooth-2400 to 2480 MHz, and Satellite communication applications in X-Band-8000 to 12000 MHz. The overall planar dimension of the proposed antenna is 40×20mm2. The antennawas designed, along with the parametric study, using Electromagnetic (EM) simulation tool. The antenna prototype is fabricated for experimental validation with the simulated results. The proposed antenna is low profile, tunable, lightweight, cheap to fabricate and highly efficient and hence is deemed suitable for use in modern wireless communication electronic devices. [ABSTRACT FROM AUTHOR]

Summary: A two‐port multiple‐input‐multiple‐output (MIMO) antenna system operating in the mm‐wave band for 5G applications is presented. The two elements of MIMO structure are separated from each other by 19 mm (1.9 λ) and excited by microstrip feed. The MIMO elements are circular patches with round cuts at the edges to improve impedance bandwidth. Quadrilateral slot in the ground plane is designed to improve the radiation characteristics of the radiating element having size 18 ×19× 0.8 mm3. The MIMO design is simulated through CST. The proposed antenna works in 27–29 GHz range, providing a potential bandwidth of 2 GHz. Furthermore a gain is improved from 8.2 to 8.75 dB and efficiency increase from 85% to 88% and high isolation of 64 dB is achieved by placing 4‐elements of metamaterial with size 4.5 × 18 mm2 in the middle of two circular monopole antennas. The metamaterial gives us a band stop response and act as decoupler and enhance the isolation to reduce mutual coupling. By analyzing the radiation characteristics of the proposed design, in term of reflection coefficient, surface currents, reduced mutual coupling, suitable gain, envelope correlation coefficient (ECC), diversity gain (DG) and radiation pattern, the recommended antenna can be considered a good candidate for 5G applications. [ABSTRACT FROM AUTHOR]

In this work, we present a highly compact multi-branch structure multi-band antenna with a grounded coplanar waveguide (GCPW)-fed structure printed on 26 × 13 × 1.6 mm 3 sized FR-4 substrate having dielectric constant ε r of 4.3 and loss tangent δ of 0.02. In the proposed antenna, five branches are extended from the main radiator to provide multi-band behavior. Two branches are introduced at the upper end of the main radiator, effectively covering the lower bands, while the other three branches are introduced near the center of the main radiator to extend operation to higher bands. The designed antenna covers five different bands: 2.4 GHz, 4.5 GHz, 5.5 GHz, 6.5 GHz, and 7.8 GHz, with respective gain values of 1.34, 1.60, 1.83, 1.80, and 3.50 dBi and respective radiation efficiency values of 90, 88, 84, 75, and 89%. The antenna shows a good impedance bandwidth, ranging from 170 MHz to 3070 MHz. The proposed antenna is simulated in CST Microwave Studio, while its performance is experimentally validated by the fabrication and testing process. The antenna has potential applications for IoT, sub-6 GHz 5G and WLAN (both enablers for IoT), C-band, and X-band services. [ABSTRACT FROM AUTHOR]

Abstract Background In this paper we are reporting one case of exsanguinating upper gastrointestinal tract (GIT) bleed requiring massive blood transfusion and immediate life saving surgery. Case presentation A 30 years old female, 12 weeks pregnant was referred to our hospital from the earth-quake affected area of Kashmir with history of upper abdominal pain, haematemesis and melaena for one week. After stabilizing the patient, upper gastro-intestinal endoscopy was performed. It revealed gastric ulcer just distal to the gastro-esophageal junction on the lesser curvature. Biopsy from the ulcer edge led to profuse spurting of the blood and patient went into state of shock. Immediate resuscitation led to rebleeding and recurrence of post haemorrahagic shock. Conclusion The patient was immediately explored and total gastrectectomy with splenectomy concluded as life saving procedure. A review of literature was conducted to make this report possible.

This work proposes a low-profile, printed antenna that offers pattern and frequency reconfiguration functionalities printed on FR-4 substrate with a size of 46 × 32 × 1.6 mm3. The proposed antenna can operate in five different frequency bands, each one identified as a Mode, wherein there are possibilities of pattern reconfiguration. The frequency and pattern reconfigurability are made possible through 12 p-i-n diode switches (S1 to S12). The former is enabled through the switches S1 to S4 within the radiating patch, hence effectively controlling the resonant bands of the antenna; the latter is made possible through main lobe beam steering, enabled by the rest of the eight switches (S5 to S12), loaded in split parasitic elements designed on both sides of the radiator. The proposed antenna operates in the 5 GHz (4.52–5.39 GHz) band when all switches are OFF. When S1 is ON, the operating band shifts to 3.5 GHz (2.96–4.17 GHz); it changes to a 2.6 GHz (2.36–2.95 GHz) band when S1 and S2 are ON. When S3 is also turned ON, the antenna shifts to the 2.1 GHz Band (1.95–2.30 GHz). When S1–S4 are ON, the operating band shifts to a 1.8GHz (1.67–1.90 GHz) band. In all these bands, the return loss remains less than −10 dB while maintaining good impedance matching. At each operating band, the ON/OFF states of the eight p-i-n diode switches (S5 through S12) enable beam steering. The proposed antenna can direct the main beam in five distinct directions at 3.5GHz, 2.6 GHz, and 2.1 GHz bands, and three different directions at 5 GHz and 1.8 GHz bands. Different 5G bands (2.1, 2.6, 3.5, and 5) GHz, which fall in the sub 6GHz range, are supported by the proposed antenna. In addition, GSM (1.8 GHz), UMTS (2.1 GHz), 4G-LTE (2.1 GHz and 2.6 GHz), WiMAX (2.6 GHz and 3.5 GHz) and WLAN (5 GHz) applications are also supported by the proposed antenna, which is a candidate for handheld 5G/4G/3G devices. [ABSTRACT FROM AUTHOR]

Technologies and services towards smart-vehicles and Intelligent-Transportation-Systems (ITS), continues to revolutionize many aspects of human life. This paper presents a detailed survey of current techniques and advancements in Automatic-Number-Plate-Recognition (ANPR) systems, with a comprehensive performance comparison of various real-time tested and simulated algorithms, including those involving computer vision (CV). ANPR technology has the ability to detect and recognize vehicles by their number-plates using recognition techniques. Even with the best algorithms, a successful ANPR system deployment may require additional hardware to maximize its accuracy. The number plate condition, non-standardized formats, complex scenes, camera quality, camera mount position, tolerance to distortion, motion-blur, contrast problems, reflections, processing and memory limitations, environmental conditions, indoor/outdoor or day/night shots, software-tools or other hardware-based constraint may undermine its performance. This inconsistency, challenging environments and other complexities make ANPR an interesting field for researchers. The Internet-of-Things is beginning to shape future of many industries and is paving new ways for ITS. ANPR can be well utilized by integrating with RFID-systems, GPS, Android platforms and other similar technologies. Deep-Learning techniques are widely utilized in CV field for better detection rates. This research aims to advance the state-of-knowledge in ITS (ANPR) built on CV algorithms; by citing relevant prior work, analyzing and presenting a survey of extraction, segmentation and recognition techniques whilst providing guidelines on future trends in this area. [ABSTRACT FROM AUTHOR]

A low-profile frequency reconfigurable monopole antenna operating in the microwave frequency band is presented in this paper. The proposed structure is printed on Flame Retardant-4 (FR-4) substrate having relative permittivity of 4.3 and tangent loss of 0.025. Four pin diode switches are inserted between radiating patches for switching the various operating modes of an antenna. The proposed antenna operates in five modes, covering nine different bands by operating at single bands of 5 and 3.5 GHz in Mode 1 and Mode 2, dual bands (i.e., 2.6 and 6.5 GHz, 2.1 and 5.6 GHz) in Mode 3 and 4 and triple bands in Mode 5 (i.e., 1.8, 4.8, and 6.4 GHz). The Voltage Standing Waves Ratio (VSWR) of the presented antenna is less than 1.5 for all the operating bands. The efficiency of the designed antenna is 84 % and gain ranges from 1.2 to 3.6 dBi, respectively, at corresponding resonant frequencies. The achieve bandwidths at respective frequencies ranges from 10.5 to 28%. The proposed structure is modeled in Computer Simulation Technology microwave studio (CST MWS) and the simulated results are experimentally validated. Due to its reasonably small size and support for multiple wireless standards, the proposed antenna can be used in modern handheld fifth generation (5G) devices as well as Internet of Things (IoT) enabled systems in smart cities. [ABSTRACT FROM AUTHOR]