Search

The invention of hydroelectric nanogenerators (HENGs) is a breakthrough technology for green electricity generation. However, the underlying mechanisms driving energy conversion remain largely unknown, impeding the development of HENGs with high energy densities. Here, we develop a new Multiphysics model involving Darcy's law, phase transfer in porous media, and current modules to reveal the mechanisms of electricity generation in HENGs. This is the first model to simulate evaporation as a streaming potential variable with the Robin-type boundary condition that overcomes the shortcomings of Neumann- and Dirichlet-type boundary conditions. Including the streaming potential and electric double layer (EDL) effects, the simulation can be based on actual water flow conditions, which is more convincing and lays a microscopic foundation for future research and exploration into the mechanism of hydroelectric electricity generation. The new model reveals that the concentrations of salt solutions significantly impact the output power density of HENGs by affecting the solution conductivity in the stern layer, while relative humidity has a minimal impact. This model along with experimental validation offers a robust method to improve the electrical output of HENGs. [ABSTRACT FROM AUTHOR]

Wastewater recycling is a solution to address the global water shortage. Phenols are major pollutants in wastewater, and they are toxic even at very low concentrations. Advanced oxidation process (AOP) is an emerging technique for the effective degradation and mineralization of phenols into water. Herein, we aim at giving an insight into the current state of the art in persulfate-based AOP for the oxidation of phenols using metal/metal-oxide and carbon-based materials. Special attention has been paid to the design strategies of high-performance catalysts, and their advantages and drawbacks are discussed. Finally, the key challenges that govern the implementation of persulfate-based AOP catalysts in water purification, in terms of cost and environmental friendliness, are summarized and possible solutions are proposed. This work is expected to help the selection of the optimal strategy for treating phenol emissions in real scenarios. [ABSTRACT FROM AUTHOR]

Microfluidic technology is applied across various research areas including organ-on-chip (OOC) systems. The main material used for microfluidics is polydimethylsiloxane (PDMS), a silicone elastomer material that is biocompatible, transparent, and easy to use for OOC systems with well-defined microstructures. However, PDMS-based OOC systems can absorb hydrophobic and small molecules, making it difficult and erroneous to make quantitative analytical assessments for such compounds. In this paper, we explore the use of a synthetic fluoropolymer, poly(4,5-difluoro-2,2-bis(trifluoromethyl)-1,3-dioxole-co-tetrafluoroethylene) (Teflon™ AF 2400), with excellent "non-stick" properties to functionalize OOC systems. Cannabinoids, including cannabidiol (CBD), are classes of hydrophobic compounds with a great potential for the treatment of anxiety, depression, pain, and cancer. By using CBD as a testing compound, we examined and systematically quantified CBD absorption into PDMS by means of an LC-MS/MS analysis. In comparison to the unmodified PDMS microchannels, an increase of approximately 30× in the CBD signal was detected with the fluoropolymer surface modification after 3 h of static incubation. Under perfusion conditions, we observed an increase of nearly 15× in the CBD signals from the surface-modified microchannels than from the unmodified microchannels. Furthermore, we also demonstrated that fluoropolymer-modified microchannels are compatible for culturing hCMEC/D3 endothelial cells and for CBD perfusion experiments. [ABSTRACT FROM AUTHOR]

Besides the conventional fiber production methods, microfluidics has emerged as a promising approach for the engineered spinning of fibrous materials and offers excellent potential for fiber manufacturing in a controlled and straightforward manner. This method facilitates low-speed prototype synthesis of fibers for diverse applications while providing superior control over reaction conditions, efficient use of precursor solutions, reagent mixing, and process parameters. This article reviews recent advances in microfluidic technology for the fabrication of fibrous materials with different morphologies and a variety of properties aimed at various applications. First, the basic principles, as well as the latest developments and achievements of microfluidic-based techniques for fiber production, are introduced. Specifically, microfluidic platforms made of glass, polymers, and/or metals, including but not limited to microfluidic chips, capillary-based devices, and three-dimensional printed devices are summarized. Then, fiber production from various materials, such as alginate, gelatin, silk, collagen, and chitosan, using different microfluidic platforms with a broad range of cross-linking agents and mechanisms is described. Therefore, microfluidic spun fibers with diverse diameters ranging from submicrometer scales to hundreds of micrometers and structures, such as cylindrical, hollow, grooved, flat, core–shell, heterogeneous, helical, and peapod-like morphologies, with tunable sizes and mechanical properties are discussed in detail. Subsequently, the practical applications of microfluidic spun fibers are highlighted in sensors for biomedical or optical purposes, scaffolds for culture or encapsulation of cells in tissue engineering, and drug delivery. Finally, different limitations and challenges of the current microfluidic technologies, as well as the future perspectives and concluding remarks, are presented. [ABSTRACT FROM AUTHOR]

Noble-metal nanoparticles (NMNPs) have unique properties beneficial for the development of novel reporting technologies to enhance the detection sensitivity and specificity of clinically validated biomarkers. Unique size- and shape-dependent optical, catalytic, and magnetic properties of NMNPs have enabled significant advances in biosensing due to facilitation of colorimetric detection, localized surface plasmon resonance, fluorescence enhancement/quenching, surface-enhanced Raman scattering, electrochemical activity, etc. Among these, the colorimetric detection method is highly attractive for use in point-of-need diagnostic applications in which color changes in the presence of biomarkers can be directly observed with the naked eye without the requirement of any equipment. This capability fulfills one of the main requirements set by the World Health Organization to provide people living in remote/regional/low-resource settings access to effective and comprehensive primary care. Although there are many scientific publications, the commercialization of NMNP-based colorimetric diagnostic assays for point-of-need applications is lagging mainly because of the lack of knowledge related to NMNPs in dealing with biological samples and sensitivity of the tests required for the real-world applications. Herein, we provide a critical review of the fundamentals of NMNPs and the recent progress in their usage for monitoring and detecting clinically relevant biomarkers in biological samples at the point-of-need to scientifically assess the benefits and limitations of this technology. We then compare the methods employed to enhance the sensitivity of colorimetric assays in detecting clinically validated target biomarkers in body fluids. Finally, we investigate the future trends and strategies that deserve more research to increase the successful commercialization of these assays. [ABSTRACT FROM AUTHOR]

By utilizing the coffee‐ring effect and microfluidic paper‐based analytical devices (µPADs), this study improved the sensitivity of the determination of norfloxacin in four different food matrices. Micro‐PADs in this study were fabricated by designing and embedding wax channels onto cellulose‐based filter paper through printing and subjecting the paper to heat to allow the wax to penetrate the paper. Determination of norfloxacin concentration in food samples was achieved by monitoring the colorimetric reaction that occurred between norfloxacin and the added iron (III) nitrate nonahydrate in 5 mM ammonia in each reaction chamber. A transition metal hydroxide was formed through this reaction that resulted in the formation of a solid precipitate to enable the antibiotic to bind to the iron molecule via coordination chemistry. This metal ion–antibiotic complex generated a visible color change. Following the colorimetric reaction, images were taken and subsequently analyzed via ImageJ to determine the relative pixel intensity that was used to infer norfloxacin concentration. The analytical sensitivity of this device was determined to be as low as 50 ppm when analyzing the inner‐ring reaction, and as low as 5 ppm when analyzing the outer coffee ring thereby allowing for an alternative cheaper, faster, and more user‐friendly method to detect norfloxacin than the conventional methods. Practical Application: This novel paper‐based microfluidic device can achieve the detection of antibiotic residues in agrifoods in a faster, cheaper, and more user‐friendly manner. [ABSTRACT FROM AUTHOR]

In this study, a paper-based microfluidic enzyme-linked immunosorbent assay (ELISA) was developed as a screening system for rapid detection of clenbuterol, which is illegally used as a growth promoter for food-producing animals. The microfluidic paper-based analytical device (μPAD) was combined with ELISA and the intrinsic properties of paper allowed the entrapment of antibody through cellulosic fibres, validating to be an alternative to 96-well ELISA microplate for food safety monitoring. Detection of clenbuterol in milk was achieved by measuring the intensity of colour change that was proportional to the analyte concentration with a detection limit of 0.2 ppb. The μPAD effectively reduces the cost, volume of reagents, and time required to run ELISA for food sample testing. [ABSTRACT FROM AUTHOR]

Wetting behaviors on stretchable supports are very common in our daily lives, however, received limited attention even they show promising potentials in flexible electronics and other fields. In this study, stretchable wetting behaviors of conductive liquids deposited onto two horizontal rubber fibers are investigated. A firm liquid/solid interaction during the stretching process can contribute to a stable liquid bridge between the fibers even under extremely stretching, showing their proof-to-principle ability to monitor human movement toward early diagnosis of Parkinson's disease or sports injury prevention. [ABSTRACT FROM AUTHOR]

Cellulose paper specimens with and without surface modification were compared in order to study their physicochemical compatibility with quantum dots (QDs) for biochemical sensing applications. Silane and chitosan modification methods were applied. The distribution of QDs deposited on untreated paper and papers modified with silane and chitosan were investigated in order to understand the interaction between QDs and fibre. Modified papers were shown to significantly reduce the undesirable redistribution of QDs during paper drying. The retention ability and thermal resistance of QDs to the loss of fluorescence on modified papers were also studied for the purpose of determining the most suitable paper surface modification for developing QD-Paper-based analytical devices (QD-PADs). Furthermore, chitosan-modified paper was used to design QD-PADs to quantify glucose concentration in aqueous samples; the quenching effect of the enzymatic product on the fluorescent emission of QDs was used as the indicator system. The change of fluorescence of QDs was measured by a simple in-house constructed fluorescence imaging system. The detection limit of glucose was 5 mg/dL, which is comparable with other reported paper sensors for detection of glucose. [ABSTRACT FROM AUTHOR]