Search

In this study, different fiber sources such as inulin, peas and carrots were used to produce fruit snacks enriched with dietary fiber. The effect of these fiber sources on the proximate composition, pH, titratable acidity, water activity, color, texture, total phenolic content, microbial load, and sensory acceptability of fruit snacks was determined. Results showed that fruit snacks enriched with inulin (5.0%) had the highest content of total dietary fiber while snacks enriched with carrot fiber (5.0%) had the highest total phenolic content. The moisture content of fruit snacks with different fibers decreased in comparison to control snacks as fiber was added into their formulation. Moreover, the water activity values of fruit snacks (aw) were lower than 0.7, indicating a low risk for bacterial growth and affirming a favorable shelf life. Compared to control snacks, increasing the dietary fiber addition from 2.5 to 5.0% significantly increased the hardness, gumminess and chewiness values of fruit snacks. The microbiological analysis of fruit snacks indicated that snacks were safe. Additionally, results showed that fruit snacks (2.5%) enriched with inulin and pea fiber were found to have higher sensory acceptability scores than others. [ABSTRACT FROM AUTHOR]

To boost revaluation of industrial by-products of artichoke, this research tries to determine the stability throughout storage of phenolic compounds and their antioxidant activity in biscuits enriched with fiber-rich powders extracted from b y-products of artichokes (FRPA). To determine the most stable extraction method, biscuits were formulated with FRPA extracted by two different environmentally friendly extraction solvents: water (W) and a solution of 1% CaCl2∙5H2O (CA) and compared with biscuits made with pea fiber (P) and control biscuits (B) without fiber added. Initially and during storage, the biscuits enriched with FRPA (W, CA) showed a higher content of bioavailable polyphenols and antioxidant activity compared to the control biscuits (B) and the reference fiber (P, pea fiber). In conclusion, FRPA are an excellent source of bioavailable fiber with antioxidant activity, but especially the FRPA extracted with 1% CaCl2∙5H2O (CA), and they could present a good alternative to the use of pea fiber. [ABSTRACT FROM AUTHOR]

The overall objective of this study was to understand texturization of pea protein isolate (PPI) using low moisture extrusion, and investigate protein interactions, functionality, and cross‐linking with the inclusion of different levels of pea fiber (5–15%) and different types of starch‐containing legume flours (20% chickpea flour or pea flour). PPI/ legume flour raw formulations had 18–27% lower water absorption capacity (WAC) as compared to the PPI control. However, WAC increased by 8–16% with the addition of pea fiber to a PPI/ legume flour control. Rapid Visco Analysis trends mirrored these results with peak viscosity shifting to higher temperatures with the addition of legume flour and lower temperatures with the addition of pea fiber. The role of starch in interfering with protein hydrophilic interactions and that of fiber in decoupling this effect were discussed. These interactions determined extruded textured protein properties, with more layering and denser products (174–229% higher bulk density as compared to control) observed with the addition of legume flours leading to lower water hydration capacity (WHC), as opposed to more cellular and porous microstructure (55–58% lower bulk density as compared to control) with the addition of fiber. Bulk density and WHC trends due to these porosity and layering effects impacted the instrumental texture characteristics of ground hydrated product, including hardness that increased from 475 g to 837–2334 g with the higher layering caused by starch, but decreased from 1295 g to 534–1050 g due to the porosity induced by fiber. To summarize, the use of legume flours and fiber can allow flexibility in targeting specific qualities while reducing costs and increasing sustainability of plant‐based meats. Practical Application: Health, environment, and animal welfare concerns are creating a growing movement toward plant‐based meat. Pea protein isolate and concentrate have become popular ingredients for texturized plant protein. Understanding of the role of starch and fiber in the structuring of textured pea protein could lead to use of legume flours and co‐products of protein isolation to reduce cost and increase sustainability and nutrition of meat alternatives while targeting desired textural attributes. [ABSTRACT FROM AUTHOR]

In this study, pea residue reserve insoluble diet fiber (hereinafter referred to as pea fiber) was used as a raw material. The effects of γ-irradiation doses (0, 0.5, 1, 2, 3, and 5 kGy) on the structural properties (main composition, particle size and specific surface area, scanning electron microscope (SEM) microstructure, Fourier transform infrared spectroscopy, and X-ray diffraction) and functional properties (oil-holding capacity, swelling and water-holding capacity, and adsorption properties) of pea fiber were explored. The results show that, when the γ-irradiation dose was 2 kGy, compared with the untreated sample, the contents of cellulose, hemicellulose and lignin in pea fiber decreased by 1.34 ± 0.42%, 2.56 ± 0.03% and 2.02 ± 0.05%, respectively, and the volume particle size of pea fiber decreased by 17.43 ± 2.35 μm. The specific surface area increased by 23.70 ± 2.24 m2/kg and the crystallinity decreased by 7.65%. Pore and irregular particles appeared on the microstructure surface of the pea fiber treated with γ-irradiation. The results of the infrared spectrum showed that the hemicellulose and lignin in pea fiber were destroyed by γ-irradiation. These results indicate that γ-irradiation can significantly affect the structural properties of pea fiber. When the γ-irradiation dose was 2 kGy, the highest oil-holding capacity, swelling capacity and water-holding capacity of pea fiber were 8.12 ± 0.12 g/g, 19.75 ± 0.37 mL/g and 8.35 ± 0.18 g/g, respectively, and the adsorption capacities of sodium nitre, cholesterol and glucose were also the strongest. These results indicate that the functional properties of pea fiber are improved by γ-irradiation. In this study, γ-irradiation technology was used as pretreatment to provide a theoretical basis for the application of pea fiber in food processing. [ABSTRACT FROM AUTHOR]

In this study, pea residue reserve insoluble diet fiber (hereinafter referred to as pea fiber) was used as a raw material. The effects of γ-irradiation doses (0, 0.5, 1, 2, 3, and 5 kGy) on the structural properties (main composition, particle size and specific surface area, scanning electron microscope (SEM) microstructure, Fourier transform infrared spectroscopy, and X-ray diffraction) and functional properties (oil-holding capacity, swelling and water-holding capacity, and adsorption properties) of pea fiber were explored. The results show that, when the γ-irradiation dose was 2 kGy, compared with the untreated sample, the contents of cellulose, hemicellulose and lignin in pea fiber decreased by 1.34 ± 0.42%, 2.56 ± 0.03% and 2.02 ± 0.05%, respectively, and the volume particle size of pea fiber decreased by 17.43 ± 2.35 μm. The specific surface area increased by 23.70 ± 2.24 m2/kg and the crystallinity decreased by 7.65%. Pore and irregular particles appeared on the microstructure surface of the pea fiber treated with γ-irradiation. The results of the infrared spectrum showed that the hemicellulose and lignin in pea fiber were destroyed by γ-irradiation. These results indicate that γ-irradiation can significantly affect the structural properties of pea fiber. When the γ-irradiation dose was 2 kGy, the highest oil-holding capacity, swelling capacity and water-holding capacity of pea fiber were 8.12 ± 0.12 g/g, 19.75 ± 0.37 mL/g and 8.35 ± 0.18 g/g, respectively, and the adsorption capacities of sodium nitre, cholesterol and glucose were also the strongest. These results indicate that the functional properties of pea fiber are improved by γ-irradiation. In this study, γ-irradiation technology was used as pretreatment to provide a theoretical basis for the application of pea fiber in food processing.

In the food industry, the most prominent and concerned points in the application of dietary fiber are hydration properties and oil absorption capacity. The target of this work was to investigate the impact of a novel industry-scale microfluidizer system (ISMS) on the changing structures and functionalities of pea fiber. Different ISMS treatment intensity (0–120 MPa for one pass and 120 MPa for two passes) was applied to treat pea fiber. ISMS treatment induced the reduction in particle size and the transformation of big compact blocks to loose flakes, and the destruction of the original ordered cellulose structure caused the decline of crystallinity. Meanwhile, the hydration properties of pea fiber were improved, and pre-pulverizer and industry-scale microfluidizer treatment together increased the swelling capacity and water retention capacity of fiber. The oil holding capacity of ISMS-treated fiber was increased to more than double the original one. The elevated functionalities of pea fiber by ISMS treatment could be attributed to loosening structure, exposing more surface area, and disordering the crystalline structure, which increased the sites of water binding and oil adsorption. These findings suggested that ISMS could be applied as an effective industrial technique to the disintegrate structure and improve the functionalities of pea fiber, so as to widen the application of pea fibers in foods.

Dietary fibers can influence a dog's overall health, but high concentrations of soluble dietary fibers can cause soft stools. An in vitro model could be useful to predict the rate fibers are fermented once they reach the colon. Pet food companies are constantly searching for new ingredients to differentiate their products from competitors. Miscanthus grass (MG), pea fiber (PF), and sorghum bran (SB) are novel fiber sources that could be alternatives to standards like cellulose (CE) and beet pulp (BP). The objectives of the study were to determine the effects of fiber source on organic matter disappearance (OMD), estimated organic matter disappearance (EOMD), and fermentation end-product concentrations using an in vitro fermentation procedure and dog fecal inoculum. Total dietary fiber (TDF) residues from MG, CE, BP, PF, and SB were fermented in vitro with buffered dog feces. Fecal samples were collected and maintained in anaerobic conditions until the dilution and inoculation. Test tubes containing the fibrous substrates were incubated for 4, 8, and 12 h at 39 °C. Short-chain fatty acids (SCFA), branched-chain fatty acids (BCFA), OMD, and EOMD were determined for each fiber source and time point. Beet pulp had the highest OMD, EOMD, and SCFA production of all tested fiber sources (38.6% OMD, 26.2% EOMD, 2.72 mmol SCFA/g of substrate). Sorghum bran led to greater concentrations of BCFA (59.86 µmol/g of substrate) and intermediate OMD and EOMD compared to the other tested fibers. Cellulose and MG were poorly fermented with the lowest OMD, EOMD, SCFA, and BCFA compared to other fibers. In conclusion, MG could be used as an insoluble minimally fermentable replacement fiber for CE in dog foods. [ABSTRACT FROM AUTHOR]

The objective of this work was characterize and evaluate the protein-stabilizing property of pea soluble polysaccharide (PSPS) extracted from pea by-products using spray-drying and ethanol precipitation oven drying, obtaining PSPS-A and PSPS-B, respectively. The weight average molecular weight (Mw) of PSPS-A and PSPS-B were 625 kDa and 809 kDa, respectively. The results of Fourier transform infrared spectroscopy (FT-IR) analysis indicated that PSPS-A, PSPS-B and soybean soluble polysaccharide (SSPS) contained the same functional groups. The absolute negative charges of PSPS-A or PSPS-B in aqueous solution were slightly higher than that of SSPS at pH 2.0 to 7.0. The apparent diameter of PSPS-B (479.1 nm) was larger than that of PSPS-A (127.7 nm) and SSPS (209.5 nm) were measured by dynamic light scattering. The AFM images revealed that both PSPS-A and PSPS-B possessed star-like structures with more side chains as compared to SSPS. It was found that the addition of 0.15% PSPS-A or 0.1% PSPS-B was adequate to prevent the aggregation of protein and obtain stable dispersion. Furthermore, PSPS has a wider pH range (pH 3.6–4.6) to stabilize milk protein than SSPS (pH 3.6–4.2). [ABSTRACT FROM AUTHOR]

Several studies have demonstrated the beneficial impact of dried peas and their components on glucose tolerance; however, the role of gut microbiota as a potential mediator is not fully examined. In this study, we investigated the effect of dietary supplementation with raw and cooked pea seed coats (PSC) on glucose tolerance, microbial composition of the gut, select markers of intestinal barrier function, and short chain fatty acid profile in glucose intolerant rats. Male Sprague Dawley rats were fed high fat diet (HFD) for six weeks to induce glucose intolerance, followed by four weeks of feeding PSC-supplemented diets. Cooked PSC improved glucose tolerance by approximately 30% (p < 0.05), and raw and cooked PSC diets reduced insulin response by 53% and 56% respectively (p < 0.05 and p < 0.01), compared to HFD (containing cellulose as the source of dietary fiber). 16S rRNA gene sequencing on fecal samples showed a significant shift in the overall microbial composition of PSC groups when compared to HFD and low fat diet (LFD) controls. At the family level, PSC increased the abundance of Lachnospiraceae and Prevotellaceae (p < 0.001), and decreased Porphyromonadaceae (p < 0.01) compared with HFD. This was accompanied by increased mRNA expression of mucin genes Muc1, Muc2, and Muc4 in ileal epithelium (p < 0.05). Serum levels of acetate and propionate increased with raw PSC diet (p < 0.01). These results indicate that supplementation of HFD with PSC fractions can improve glycemia and may have a protective role against HFD-induced alterations in gut microbiota and mucus layer. [ABSTRACT FROM AUTHOR]

Background: The development of high-protein, fiber-rich foods targeting appetite control could be an efficient tool in obesity prevention.Objectives: We investigated whether ad libitum energy intake (EI), appetite, and metabolic markers in a meal context were affected by 1) fiber addition (rye bran and pea fiber) to pork meatballs, 2) the food matrix of the fiber (fiber meatballs compared with fiber bread), or 3) the protein source (animal compared with vegetable protein patties).Methods: In a crossover design, 40 healthy men [mean ± SD: body mass index (BMI; in kg/m2), 22.2 ± 1.9; age, 23.3 ± 2.9 y] consumed 4 test meals: a low-fiber meal consisting of pork meatballs plus wheat bread (LF meal); pork meatballs plus fiber bread; fiber meatballs plus wheat bread, and vegetable patties with a natural fiber content plus wheat bread (∼3000 kJ; protein ∼18% of energy, carbohydrate ∼50% of energy, fat ∼30% of energy; 13 g fiber in the fiber meals). Ad libitum EI after 4 h was the primary endpoint. Moreover, appetite sensations and postprandial responses of glucose, insulin, glucagon-like peptide-1, peptide YY 3-36, and plasma amino acids were measured.Results: Ad libitum EI did not differ significantly between the meals. Satiety and fullness increased 11% and 13%, respectively, and hunger and prospective intake decreased 17% and 15%, respectively, after the meal of fiber meatballs plus wheat bread compared with the LF meal (P < 0.01). Hormonal and metabolic responses did not differ between the meals. In general, plasma amino acid concentrations were higher after the fiber-rich meals than after the LF meal.Conclusions: Meals based on meatballs and bread with differences in the fiber content, food matrix of fiber, and protein source had similar effects on ad libitum EI in healthy men. However, fiber addition to pork meatballs favorably affected appetite sensations but without changes in hormonal and metabolic responses. Moreover, animal- and vegetable-protein-based, fiber-matched meals had similar effects on appetite regulation. This trial was registered at clinicaltrials.gov as NCT02521805. [ABSTRACT FROM AUTHOR]

Background: Pea fiber (PF) is a potential fibrous supplement in swine production. The influence of dietary PF on microbial community in the colon of pigs remains largely unexplored. Methanogens in the hindgut of monogastric animals play important roles in degradation of dietary fibers and efficient removal of microbial metabolic end product H2. Understanding the impact of dietary PF on the structure of colonic methanogens may help understand the mechanisms of microbe-mediated physiological functions of PF. This study investigated the influence of PF on the diversity and quantity and/or activity of colonic methanongens of piglets and finishing pigs. Four archaeal 16S rRNA clone libraries were constructed for piglets and finishers fed with control (Piglet-C and Finisher-C) or PF diet (Piglet-P and Finisher-P). Results: There were 195, 190, 194 and 196 clones obtained from the library Piglet-C, Piglet-P, Finisher-C and Finisher-P, respectively, with corresponding 12, 11, 11 and 16 OTUs (operational taxonomic units). Significant differences of Shannon Index among the four libraries were found (P < 0.05). Libshuff analysis showed that the archaeal community structure among the four libraries were significantly different (P < 0.0001). The predominant methanogens shifted from Methanobrevibacter to Methanobrevibacter and Methanomassiliicoccus-like genus as a result of dietary PF. Supplementation of PF significantly increased the copy numbers of mcrA and dsrA genes (P < 0.05). Conclusions: Alteration of methanogenic community structure may lead to functional transition from utilization of H2/ CO2 to employment of both H2/CO2 and methanol/CO2. Quantification of three functional genes (mcrA, dsrA and fhs) of methanogens, sulfate-reducing bacteria (SRB) and acetogens revealed that dietary PF also increased the activity of methanogens and SRB,probably associated with increased proportion of Methanomassiliicoccus luminyensis-species. Further study is required to examine the interaction between specific methanogens and SRB during fermentation of dietary PF. [ABSTRACT FROM AUTHOR]

In the food industry, the most prominent and concerned points in the application of dietary fiber are hydration properties and oil absorption capacity. The target of this work was to investigate the impact of a novel industry-scale microfluidizer system (ISMS) on the changing structures and functionalities of pea fiber. Different ISMS treatment intensity (0–120 MPa for one pass and 120 MPa for two passes) was applied to treat pea fiber. ISMS treatment induced the reduction in particle size and the transformation of big compact blocks to loose flakes, and the destruction of the original ordered cellulose structure caused the decline of crystallinity. Meanwhile, the hydration properties of pea fiber were improved, and pre-pulverizer and industry-scale microfluidizer treatment together increased the swelling capacity and water retention capacity of fiber. The oil holding capacity of ISMS-treated fiber was increased to more than double the original one. The elevated functionalities of pea fiber by ISMS treatment could be attributed to loosening structure, exposing more surface area, and disordering the crystalline structure, which increased the sites of water binding and oil adsorption. These findings suggested that ISMS could be applied as an effective industrial technique to the disintegrate structure and improve the functionalities of pea fiber, so as to widen the application of pea fibers in foods. [ABSTRACT FROM AUTHOR]

Lower fat (10% and 14%) ground beef patties containing inner pea fiber as dry powder or as part of a high fat mixture were compared to all-beef patties (10%, 14%, and 18% fat). Patties processed with pea fiber had improved tenderness and cooking yields and showed less change in thickness during cooking, but required longer cooking times to reach 71 °C compared to all-beef controls. Beef flavor intensity of pea fiber patties did not differ from 10% and 14% fat all-beef patties. Different forms of pea fiber usage produced similar patty properties. Use of inner pea fiber in lower fat beef patties improved tenderness and cooking yield, without negative effects on juiciness and flavor. [ABSTRACT FROM AUTHOR]