Search

Lewis/Brønsted acidic deep eutectic solvents (LBDESs) are a recent class of solvents that combine the two types of acidity. In some cases, this synergy leads to enhanced catalytic properties for many reactions and applications. For this reason, it is important to discover more LBDESs. In this work, we prepared and characterized four different zinc(II)-based LBDESs, mixing ZnCl2 and various Brønsted acids: acetic, glycolic, levulinic, and formic acids. Apart from the latter, for which the corresponding DES is not thermally stable, the samples have been characterized in terms of density, viscosity, and conductivity. Notably, as zinc(II) is a diamagnetic metal, all of them are suitable for NMR spectroscopy, for example, for kinetic and mechanistic studies. [ABSTRACT FROM AUTHOR]

Aims: Although survival of patients with congenital heart disease (CHD) improved significantly over time, life expectancy is still not normal. We aimed to investigate how adult patients, their partners, and treating cardiologists estimated the individual life expectancy of CHD patients. Furthermore, preferences regarding end-of-life (EOL) communication were investigated. Methods and results: In this study, we included 202 patients (age: 50 ± 5) who were operated in childhood (<15 years old) between 1968 and 1980 for one of the following diagnoses: atrial septal defect, ventricular septal defect, pulmonary stenosis, tetralogy of Fallot, or transposition of the great arteries. A specific questionnaire was administered to both the patients and their partners, exploring their perceived life expectancy and EOL wishes. Two cardiologists independently assessed the life expectancy of each patient. Most adults with CHD believed their life expectancy to be normal. However, significant differences were found between estimated life expectancy by the cardiologist and patients (female: P = 0.001, male: P = 0.002) with moderate/severe defects, as well as for males with mild defects (P = 0.011). Regarding EOL communication, 85.1% of the patients reported that they never discussed EOL with a healthcare professional. Compared with patients with mild CHD, significantly more patients with moderate/severe defect discussed EOL with a physician (P = 0.011). The wish to discuss EOL with the cardiologist was reported by 49.3% of the patients and 41.7% of their partners. Conclusion: Adult patients, especially with moderate/severe CHD, perceived their life expectancy as normal, whereas cardiologists had a more pessimistic view than their patients. Increased attention is warranted for discussions on life expectancy and EOL to improve patient-tailored care. Graphical abstract [ABSTRACT FROM AUTHOR]

The biomass waste obtained at the end-of-pipe of the extraction industry can be used as fuel for energy production, aiming at cost reduction/waste disposal issues. However, few systematic investigations into the calorific value of these residues are reported in the literature. In this work, the thermochemical properties of solid residues from different biomasses (residues from citrus peels, leaves, flowers, stems, and poultry feathers used for extraction) as potential biomass fuels have been investigated. The heat of combustion (ΔcH) of the solid residues from citrus (orange, tangerine, lemon, grapefruit, and pomelo), aromatic herbs (rosemary, lavender, thyme, Artemisia vulgaris L. and Ruta chalepensis L.), and poultry feathers biomasses was measured by direct calorimetry. The results were compared with the higher heating values (HHV) calculated using the elemental (CHNOS) and thermogravimetric (TGA) analyses data and with the enthalpy of combustion calculated using the biomass composition predicted by FTIR spectroscopy in tandem with chemometrics. The calculated values match with the corresponding experimental values of ΔcH. The heat of combustion highlights the energetic features of solid residues for their potential uses as alternative biomass for energy production. This information is essential to evaluate the employment of solid residues as fossil fuel substitutes. [ABSTRACT FROM AUTHOR]

Protein‐polymer conjugates are a blooming class of hybrid systems with high biomedical potential. Despite a plethora of papers on their biomedical properties, the physical–chemical characterization of many protein‐polymer conjugates is missing. Here, we evaluated the thermal stability of a set of fully‐degradable polyphosphoester‐protein conjugates by variable temperature circular dichroism, a common but powerful technique. We extensively describe their thermodynamic stability in different environments (in physiological buffer or in presence of chemical denaturants, e.g., acid or urea), highlighting the protective role of the polymer in preserving the protein from denaturation. For the first time, we propose a simple but effective protocol to achieve useful information on these systems in vitro, useful to screen new samples in their early stages. [ABSTRACT FROM AUTHOR]

Featured Application: The combined use of light scattering, turbidimetry, and differential scanning calorimetry highlighted the thermoresponsive self-assembling behavior in water of the oligo(ethylene glycol)-modified pentafluorostyrene homopolymers. The potential applications of such novel smart materials are open to study in advanced fields, including nano-medicine, nano-catalysis and bottom-up nanotechnology at large. Amphiphilic tetrafluorostyrene monomers (EFS8) carrying in the para position an oligoethylene glycol chain containing 8 oxyethylenic units on average were synthesized and used for preparation via activator regenerated by electron transfer atom transfer radical polymerization (ARGET-ATRP) of the corresponding amphiphilic homopolymers (pEFS8-x) with different degrees of polymerization (x = 26 and 46). Combining light transmittance and nano-differential scanning calorimetry (n-DSC) measurements revealed that pEFS8-x homopolymers displayed a lower critical solution temperature (LCST) thermoresponsive behavior in water solutions. Moreover, n-DSC measurements revealed the presence in heating scans of a broad endothermic peak ascribable to the dehydration process of the polymer single chains (unimers) and their collapse into aggregates. Consistently, dynamic light scattering (DLS) measurements showed below the LCST the presence of small nanostructures with a hydrodynamic diameter size Dh of 6–7 nm, which collapsed into concentration-dependent larger multichain aggregates (Dh = 300–3000 nm) above LCST. Interestingly, n-DSC data showed that the unimer-aggregate transition was reversible up to a specific temperature (Trev) of each homopolymer, which in any case was higher than Tmax. When heating above Trev the transition was no longer reversible, causing the shift of Tonset and Tmax at lower values, thus suggesting an increase in hydrophobicity of the polymer systems associated with a temperature-dependent dehydration process. [ABSTRACT FROM AUTHOR]

[Display omitted] • Reuse of Sicilian volcanic residues as precursors for alkali-activated materials. • TGA, TG coupled to FT-IR and X-ray µCT have been used to define the influence of reactants. • Multidisciplinary approach for the optimization of the mix design. Insights on thermal behavior and microstructures of AAMs based on Sicilian volcanic precursors (i.e., volcanic ash, "ghiara" and pumice) have been performed. A multidisciplinary approach by means of thermogravimetric analysis coupled to Fourier Transform Infrared Spectroscopy and X-ray Computed Microtomography has been used with the aim to define the influence of reactants involved in the process. The obtained results show: i) the increase of metakaolin shifts the gas emission toward lower temperatures; ii) the positive relation between mass loss and liquid/solid ratio; iii) the influence of particle size of precursors on the pore development. [ABSTRACT FROM AUTHOR]

Poly(ethyl ethylene phosphonate)-based methacrylic copolymers containing polysiloxane methacrylate (SiMA) co-units are proposed as surface-active additives as alternative solutions to the more investigated polyzwitterionic and polyethylene glycol counterparts for the fabrication of novel PDMS-based coatings for marine antifouling applications. In particular, the same hydrophobic SiMA macromonomer was copolymerized with a methacrylate carrying a poly(ethyl ethylene phosphonate) (PEtEPMA), a phosphorylcholine (MPC), and a poly(ethylene glycol) (PEGMA) side chain to obtain non-water soluble copolymers with similar mole content of the different hydrophilic units. The hydrolysis of poly(ethyl ethylene phosphonate)-based polymers was also studied in conditions similar to those of the marine environment to investigate their potential as erodible films. Copolymers of the three classes were blended into a condensation cure PDMS matrix in two different loadings (10 and 20 wt%) to prepare the top-coat of three-layer films to be subjected to wettability analysis and bioassays with marine model organisms. Water contact angle measurements showed that all of the films underwent surface reconstruction upon prolonged immersion in water, becoming much more hydrophilic. Interestingly, the extent of surface modification appeared to be affected by the type of hydrophilic units, showing a tendency to increase according to the order PEGMA < MPC < PEtEPMA. Biological tests showed that Ficopomatus enigmaticus release was maximized on the most hydrophilic film containing 10 wt% of the PEtEP-based copolymer. Moreover, coatings with a 10 wt% loading of the copolymer performed better than those containing 20 wt% for the removal of both Ficopomatus and Navicula, independent from the copolymer nature. [ABSTRACT FROM AUTHOR]

Poultry feathers are among the most abundant and polluting keratin-rich waste biomasses. In this work, we developed a one-pot microwave-assisted process for eco-friendly keratin extraction from poultry feathers followed by a direct electrospinning (ES) of the raw extract, without further purification, to obtain keratin-based bioplastics. This microwave-assisted keratin extraction (MAE) was conducted in acetic acid 70% v/v. The effects of extraction time, solvent/feathers ratio, and heating mode (MAE vs. conventional heating) on the extraction yield were investigated. The highest keratin yield (26 ± 1% w/w with respect to initial feathers) was obtained after 5 h of MAE. Waste-derived keratin were blended with gelatin to fabricate keratin-based biodegradable and biocompatible bioplastics via ES, using 3-(Glycidyloxypropyl)trimethoxysilane (GPTMS) as a cross-linking agent. A full characterization of their thermal, mechanical, and barrier properties was performed by differential scanning calorimetry, thermogravimetric analysis, uniaxial tensile tests, and water permeability measurements. Their morphology and protein structure were investigated using scanning electron microscopy and attenuated total reflection-infrared spectroscopy. All these characterizations highlighted that the properties of the keratin-based bioplastics can be modulated by changing keratin and GPTMS concentrations. These bioplastics could be applied in areas such as bio-packaging and filtration/purification membranes. [ABSTRACT FROM AUTHOR]

Context: The Global Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) pandemic has resulted in explosive patterns of transmission in most countries. Nasopharyngeal swabs were the specimen's collection tools recommended for the diagnosis of SARS-CoV-2 infection, and for monitoring infection outbreaks in communities. Our objective was to report the quality and efficacy of unsupervised self-collected mid turbinate "dry FLOQSwabs" (MT FLOQSwabs) (56380CS01, Copan). There were 111 specimens collected for the study: 36 by health care personnel, from themselves, to verify the quality and efficacy of mid-turbinate swabs; 75 to compare and assess the diagnostic performance, among health care personnel, of nasopharyngeal swabs and self-collected mid-turbinate FLOQSwabs. A collection of 51 specimens was enrolled to define the efficacy of the Testami program (validation). Our analyses demonstrate that self-collected mid-turbinate dry swabs ensure an accuracy of 97.3%, as compared to the standard nasopharyngeal swabs collected by health care workers. Furthermore, the mid-turbinate FLOQSwabs can be stored without medium for six days at room temperature without affecting the molecular diagnosis of the SARS-CoV-2 virus infection. Self-collection of diagnostic specimens at home could offer an avenue to increase testing availability for SARS-CoV-2 infection without asking people to travel to a clinic or a laboratory, thus reducing people's exposure to infection. Our findings demonstrate that unsupervised self-collection swabs, transported dry, are sensitive, practical and easy-to-use tools and should be considered for diagnosis of SARS-COV-2 and coronavirus disease 2019 (COVID-19) surveillance. [ABSTRACT FROM AUTHOR]

In this work, we have analysed the binding of the Pt(II) complexes ([PtCl(4′-phenyl-2,2′:6′,2″-terpyridine)](CF3SO3) (1), [PtI(4′-phenyl-2,2′:6′,2″-terpyridine)](CF3SO3) (2) and [PtCl(1,3-di(2-pyridyl)benzene) (3)] with selected model proteins (hen egg-white lysozyme, HEWL, and ribonuclease A, RNase A). Platinum coordination compounds are intensively studied to develop improved anticancer agents. In this regard, a critical issue is the possible role of Pt-protein interactions in their mechanisms of action. Multiple techniques such as differential scanning calorimetry (DSC), electrospray ionization mass spectrometry (ESI-MS) and UV-Vis absorbance titrations were used to enlighten the details of the binding to the different biosubstrates. On the one hand, it may be concluded that the affinity of 3 for the proteins is low. On the other hand, 1 and 2 strongly bind them, but with major binding mode differences when switching from HEWL to RNase A. Both 1 and 2 bind to HEWL with a non-specific (DSC) and non-covalent (ESI-MS) binding mode, dominated by a 1:1 binding stoichiometry (UV-Vis). ESI-MS data indicate a protein-driven chloride loss that does not convert into a covalent bond, likely due to the unfavourable complexes' geometries and steric hindrance. This result, together with the significant changes of the absorbance profiles of the complex upon interaction, suggest an electrostatic binding mode supported by some stacking interaction of the aromatic ligand. Very differently, in the case of RNase A, slow formation of covalent adducts occurs (DSC, ESI-MS). The reactivity is higher for the iodo-compound 2, in agreement with iodine lability higher than chlorine. [ABSTRACT FROM AUTHOR]