Search

Tandem cycloisomerization reactions of functionalized 1,6‐enynes under indium(III) catalysis are described. This atom‐economic transformation proceeds smoothly with 5‐exo‐dig regioselectivity using commercial In(III) halides and 1,6‐enynes furnished with alcohol, carboxylic acid or amine functional groups to give bicyclic structures in good yields and diastereoselectivities. The reaction with enynals involves a three–step mechanism to give an oxatricycle and a conjugated 1,3‐diene. In the absence of the internal nucleophile the enyne cycloisomerization evolves through a skeletal rearrangement or a cyclopropanation reaction after the regioselective 5‐exo‐dig cyclization. The 1,6‐enyne cycloisomerization is stereospecific and the stereoselectivity appears to be independent of the internal nucleophile. Experimental data support a common reaction mechanism involving an initial alkyne electrophilic π‐coordination of In(III) followed by Markovnikov electrophilic alkene addition and ring‐closure by nucleophilic attack. DFT studies hold up a stepwise mechanism involving the formation of a chiral non‐classical carbocation intermediate that determines the diastereoselectivity of this tandem cycloisomerization reaction. [ABSTRACT FROM AUTHOR]

1 H -Isochromenes and 1,2-dihydroisoquinolines are synthesized by regioselective indium(III)-catalyzed intramolecular hydrofunctionalization of o -(alkynyl)benzyl derivatives. The reaction with o -(alkynyl)benzyl alcohols and amines proceeds using indium triiodide (5–10 mol%) in toluene at 80–100 °C via regioselective 6- endo - dig intramolecular alkyne hydroalkoxylation or hydroamination in good yields. Alternatively, the cycloisomerization reaction of o -(alkynyl)benzaldehydes and imine derivatives using InI3 (5 mol%) and the Hantzsch ester (120 mol%) takes place, under milder reaction conditions, to give a variety of functionalized 1 H -isochromenes and 1,2-dihydroisoquinolines through a domino cycloisomerization/reduction approach. [ABSTRACT FROM AUTHOR]

Boron‐dipyrromethene complexes (BODIPYs) are attracting a growing interest for their notable photophysical properties. Specifically, their application in organic photocatalysis is receiving particular attention thanks to their ability to undergo both electron and energy transfer processes, thus acting as promising photoredox catalysts and photosensitizers. Although the number of examples employing these organic dyes is constantly increasing, there are not so many studies that correlate their chemical composition to their photocatalytic activity. In this work, a rationally designed structure‐activity relationship study was performed by selecting a synthetically relevant atom transfer radical addition (ATRA) reaction as a benchmark. We demonstrated how the presence of heavy atoms in the chromophore's core turned out to be essential for achieving high reactivity levels. On the contrary, electron‐withdrawing groups in position 8 (meso) undermined the catalytic performances, in agreement with the proposed reaction mechanism. [ABSTRACT FROM AUTHOR]

The activation of C–H bonds through catalytic reactions using transition metals is an important challenge in organic chemistry in which the intermediates are related to those produced in the classical cross-coupling reactions. As part of our research program devoted to the development of metal-catalyzed reactions using indium organometallics, a protocol for the C–H activation and C–C coupling of 2-arylpyridines with triorganoindium reagents under Rh(I) catalysis is reported. Under the optimized conditions, we found that Me3In and Ar3In reagents reacted with 2-arylpyridines and related compounds in the presence of Rh(PPh3)3Cl, in PhCl/THF (9:1), at 120 °C for 48 h, to afford the ortho-coupling products in moderate to good yields. The nitrogen atom in the pyridine ring acts as a directing group to assist the functionalization at the ortho position of the aryl group forming a new C–C bond at this position. [ABSTRACT FROM AUTHOR]

Bench-stable solid triorganoindium compounds have been prepared by coordination with 4-(dimethylamino)pyridine (DMAP). The solid R3In(DMAP) complexes are obtained from the corresponding solution of R3In in quantitative yield and can be stored for up to several weeks. These reagents show excellent reactivity in palladium-catalyzed cross-coupling reactions with organic electrophiles. [ABSTRACT FROM AUTHOR]

The preparation of ferrocenylindium species and palladium-catalyzed cross-coupling reactions for the synthesis of monosubstituted and planar chiral 1,2-disubstituted ferrocenes is described. Triferrocenylindium reagents (Fc3In) are efficiently prepared in a one-pot procedure from ferrocenes by lithiation and transmetallation to indium using InCl3. The palladium-catalyzed cross-coupling reactions of Fc3In (40 mol%) with a variety of organic electrophiles (aryl, heteroaryl, benzyl, alkenyl and acyl halides) in THF at 80 °C overnight provided a wide variety of monosubstituted ferrocenes in good to excellent yields. This methodology allowed the stereoselective synthesis of planar chiral 2-aryl-1-oxazolylferrocenes and 2-aryl-1-sulfinylferrocenes, which are of interest in asymmetric catalysis. [ABSTRACT FROM AUTHOR]

The synthesis and photochemical study of novel nonsymmetrical 1,2-dithienylethenes (DTEs) with a maleimide bridge have been carried out. The synthetic approach to the DTEs was based on successive selective palladium-catalyzed cross-coupling reactions of 5-susbtituted-2-methyl-3-thiophenyl indium reagents with 3,4-dichloromaleimides. The required organoindium reagents were prepared from 2-methyl-3,5-dibromothiophene by a selective (C-5) coupling reaction with triorganoindium compounds (R3In) and subsequent metal-halogen exchange. The coupling reactions usually gave good yields and have a high atom economy with substoichiometric amounts of R3In. The results of photochemical studies show that these novel dithienylmaleimides undergo a photocyclization reaction upon irradiation in the UV region and a photocycloreversion after excitation in the visible region, thus they can be used as photochemical switches. ON-OFF operations can be repeated in successive cycles without appreciable loss of effectiveness in the process. [ABSTRACT FROM AUTHOR]

Cross-coupling reaction of organogold(I) phosphanes with organic electrophiles in aqueous media has been investigated. Reactions between isolated aryl-, alkenyl-, or alkynylgold(I) phosphanes and aryl halides or triflates, alkenyl halides, and allyl acetates proceed under palladium catalysis conditions at room temperature or 80 °C in water with THF as a co-solvent. The coupling reactions give good yields and are highly versatile and chemoselective, allowing the presence of free amino or hydroxy groups in the electrophile. This methodology was applied to the preparation of substituted phenylalanine esters in a demonstration that gold(I) organometallics are suitable reagents for metal-catalyzed cross-coupling reactions under protic conditions. [ABSTRACT FROM AUTHOR]

1,1′-Binaphthalenes and heterocyclic analogues can be efficiently prepared by palladium-catalysed cross-coupling reactions between tri(1-naphthyl)indium reagents and 1-halonaphthalenes and haloisoquinolines. The reactions were usually carried out in THF at 80 °C with a slight excess of the indium reagent (40 mol-%) and a low catalyst loading (4 mol-% Pd) to afford the cross-coupling products in good yields (45-99 %). The method allows the synthesis of sterically hindered 2-substituted and 2,2′-disubstituted 1,1′-binaphthalenes and naphthylisoquinolines. In addition, the coupling reactions can be performed enantioselectively and the best enantiomeric excesses were obtained by using the chiral amino-phosphane ferrocenyl ligand ( R, S)-PPFA. [ABSTRACT FROM AUTHOR]

Abstract: A short enantioselective synthesis of barrenazines A and B is described. Barrenazines A and B are prepared following a common synthetic route in nine steps (19% overall yield) and eight steps (21% overall yield), respectively, from readily available 4-methoxy-3-(triisopropylsilyl)pyridine. The synthesis relies on a highly diastereoselective nucleophilic addition of a Grignard reagent to a chiral acylpyridinium salt, a radical azidation of a silyl enol ether and the assembly of the pyrazine ring by reductive dimerization of a functionalized 5-azidopiperidin-4-one. [Copyright &y& Elsevier]

The use of indium organometallics in multifold and sequential cross-coupling reactions is reported. Triorganoindium reagents (R3In) react, under palladium catalysis, with oligohaloarenes affording the multiple cross-coupling products in a single operation. In the reaction, the three organic groups (alkyl, aryl, alkenyl or alkynyl) attached to indium are efficiently transferred to the electrophile, with only a slight excess of organometallic reagent. We demonstrate that indium organometallics are useful reagents for sequential cross-coupling reactions. This reaction illustrates the high chemoselectivity of R3In. 1 Introduction 2 Results and Discussion 2.1 Multifold Cross-Coupling Reactions 2.2 Sequential Cross-Coupling Reactions 3 Conclusion. [ABSTRACT FROM AUTHOR]

Cross-coupling reactions have played a critical role enabling the rapid expansion of structure–activity relationships (SAR) during the drug discovery phase to identify a clinical candidate and facilitate subsequent drug development processes. The reliability and flexibility of this methodology have attracted great interest in the pharmaceutical industry, becoming one of the most used approaches from Lead Generation to Lead Optimization. In this mini-review, we present an overview of cross-coupling reaction applications to medicinal chemistry efforts, in particular the Suzuki–Miyaura and Buchwald–Hartwig cross-coupling reactions as a remarkable resource for the generation of carbon–carbon and carbon–heteroatom bonds. To further appreciate the impact of this methodology, the authors discuss some recent examples of clinical candidates that utilize key cross-coupling reactions in their large-scale synthetic process. Looking into future opportunities, the authors highlight the versatility of the cross-coupling reactions towards new chemical modalities like DNA-encoded libraries (DELs), new generation of peptides and cyclopeptides, allosteric modulators, and proteolysis targeting chimera (PROTAC) approaches. [ABSTRACT FROM AUTHOR]

A new series of symmetrical organic dyes containing an indigo central core decorated with different electron donor groups have been prepared, starting from Tyrian Purple and using the Pd-catalyzed Stille-Migita coupling process. The effect of substituents on the spectroscopic properties of the dyes has been investigated theoretically and experimentally. In general, all dyes presented intense light absorption bands, both in the blue and red regions of the visible spectrum, conferring them a bright green color in solution. Using the same approach, an asymmetrically substituted D–A-π–A green dye, bearing a triarylamine electron donor and the cyanoacrylate acceptor/anchoring group, has been synthesized for the first time and fully characterized, confirming that spectroscopic and electrochemical properties are consistent with a possible application in dye-sensitized solar cells (DSSC). [ABSTRACT FROM AUTHOR]

Di(hetero)aryl ketones are important motifs present in natural products, pharmaceuticals or agrochemicals. In recent years, Pd(II)-catalyzed acylation of (hetero)arenes in the presence of an oxidant has emerged as a catalytic alternative to classical acylation methods, reducing the production of toxic metal waste. Different directing groups and acyl sources are being studied for this purpose, although further development is required to face mainly selectivity problems in order to be applied in the synthesis of more complex molecules. Selected recent developments and applications are covered in this review. [ABSTRACT FROM AUTHOR]

The publications covering new, transition metal-free cross-coupling reactions of pyrroles with electrophilic haloacetylenes in solid medium of metal oxides and salts to regioselectively afford 2-ethynylpyrroles are discussed. The reactions proceed at room temperature without catalyst and base under solvent-free conditions. These ethynylation reactions seem to be particularly important, since the common Sonogashira coupling does not allow ethynylpyrroles with strong electron-withdrawing substituents at the acetylenic fragments to be synthesized. The results on the behavior of furans, thiophenes, and pyrazoles under the conditions of these reactions are also provided. The reactivity and structural peculiarities of nucleophilic addition to the activated acetylene moiety of the novel C-ethynylpyrroles are considered. [ABSTRACT FROM AUTHOR]

A convenient two-step preparation of NH-free 5-aryl-pyrrole-2-carboxylates is described. The synthetic route consists of catalytic borylation of commercially available pyrrole-2-carboxylate ester followed by Suzuki coupling without going through pyrrole N–H protection and deprotection steps. The resulting 5-aryl substituted pyrrole-2-carboxylates were synthesized in good- to excellent yields. This synthetic route can tolerate a variety of functional groups including those with acidic protons on the aryl bromide coupling partner. This methodology is also applicable for cross-coupling with heteroaryl bromides to yield pyrrole-thiophene, pyrrole-pyridine, and 2,3'-bi-pyrrole based bi-heteroaryls. [ABSTRACT FROM AUTHOR]

Borylated aryl alkynes have been synthesized via one-pot iridium catalyzed C–H borylation (CHB)/Sonogashira cross-coupling of aryl bromides. Direct borylation of aryl alkynes encountered problems related to the reactivity of the alkyne under CHB conditions. However, tolerance of aryl bromides to CHB made possible a subsequent Sonogashira cross-coupling to access the desired borylated aryl alkynes. [ABSTRACT FROM AUTHOR]

The inside cover picture, provided by José Pérez Sestelo and co ‐ workers illustrates the preparation of triferrocenylindium reagents and their application in palladium ‐ catalyzed cross ‐ coupling reactions. In the flask, a solution of a triferrocenylindium species is prepared by reaction of a ferrocene, an organolithium reagent and indium trichloride. The subsequent palladium ‐ catalyzed cross ‐ coupling reaction affords a series of substituted ferrocenes. The asymmetric synthesis of planar chiral 1,2 ‐ disubstituted ferrocenes is also represented indicating the ortho ‐ directing groups used during the lithiation step. The planar ‐ chirality of the products depends on the directing group employed and is illustrated with a mirror. The background picture shows part of the sculpture park surrounding the Tower of Hercules in A Coruña, Spain. Details of this work can be found in the update on pages 1388 – 1393 (M. Mato, C. Pérez ‐ Caaveiro, L. A. Sarandeses, J. Pérez Sestelo, Adv. Synth. Catal. 2017, 359, 1388 – 1393; DOI: 10.1002/adsc.201601397). [ABSTRACT FROM AUTHOR]