Search

Aerosols, the tiny suspended particles in the atmosphere, are a widely studied topic around the world due to their effects on the Earth's radiation budget, climate change, and human health. Knowledge of the spatial and temporal distribution of aerosols is essential to assess air pollution and predict potential climate change. This study measured aerosol optical depth (AOD) and altitude-dependent aerosol extinctions in Nassau, The Bahamas simultaneously using a camera-based imaging lidar (CLidar). The bistatic geometry of the setup which consisted of a wide-angle lens fitted to a charge-coupled device (CCD) camera, allowed for the measurement of extinctions at all altitudes at once without requiring expensive timing electronics common to lidars. A case study was conducted on November 5, 2018. The top of the boundary layer beyond which aerosol extinction was nearly zero was detected at ~ three km above sea level. Due to the excellent resolution of the CLidar at lower altitudes, variations of aerosol concentrations within the boundary layer are efficiently detected. Optical depth was measured using the same CLidar camera at the same time, utilising star photometry, and was found to be 0.043 ± 0.040. The value falls within the range of assumed values of AOD near the regions obtained from the Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua satellite. [ABSTRACT FROM AUTHOR]

We report the recovery and re-calibration of an extensive dataset of vertical profile measurements of the 1963/64 stratospheric aerosol layer measured from a two-site searchlight measurement facility at White Sands missile base and Sacramento Peak observatory, in New Mexico, US. The recovered dataset comprises 105 profiles of 550nm aerosol extinction (βp(z)) and is part of a longer program of measurements with the US Air Force Cambridge Research Laboratories (AFCRL) searchlight facility that began in February 1963. The recovered series of βp(z) profiles span the 13-month period December 1963 to December 1964 and provide a unique record of the altitude and vertical extent of the Northern Hemisphere dispersed portion of the aerosol cloud from the March 1963 Agung volcanic eruption. The data recovery methodology involved first re-digitizing the 105 original βp(z) profiles (βp(z)) from individual Figures within an AFCRL research report (Elterman, 1966a). The re-calibration involves inverting the original equation used to compute βp(z) in Elterman (1966a; 1966b) to retrieve a normalized detector response (Er(z) Er(35)) profile for each of the 105 re-digitized βp 0(z) profiles. An iterative procedure was then used to compute the re-calibration βp(z) profiles (βp Ra(z)), with the molecular extinction profile calculated with the corresponding daily molecular extinction profile calculated from local soundings, rather than the US Standard Atmosphere 1962 in the original dataset. Two-way molecular and aerosol transmittance corrections are applied using the MODTRAN (MODerate resolution atmospheric TRANsmission) code in transmission mode, applying a best-estimate aerosol phase function calculated from measurements, applied for the entire 2.76 to 35.2 km column. For the tropospheric aerosol transmittance, the AERONET aerosol phase function from White Sands High Energy Laser Systems Test Facility (HELSTF) was applied (2.76 to 10.7 km), a separate stratospheric phase function applied between 11.2 and 35.2 km, calculated from a set of particle size distributions measured by the U-2 high-altitude aircraft over a US region in the vicinity of White Sands in early 1964. Errors were estimated taking as a reference the errors determined in the computation of βp 0(z). Using available tabulated data from the original procedure the errors in the re-digitalization of βp 0(z) and in the retrieval of the Er(z) Er(35) procedures were calculated and later added to the original estimates. Both the βp R(z) and the stratospheric aerosol optical depth magnitudes showed higher magnitudes than βp 0(z) and the original stratospheric aerosol optical depth, however their magnitudes show a reasonable agreement with other contemporary observations. Both the original and recalibration datasets are being submitted to PANGAEA data repository for its storage and public access. [ABSTRACT FROM AUTHOR]

A CCD Camera Lidar system called the CLidar system images a vertically pointing laser from the side with a spatially separated CCD camera and wide angle optics. The system has been used to investigate case studies of aerosols in mountain boundary layers in in the times following sunset. The aerosols detected by the system demonstrate the wide variation of near ground aerosol structure and capabilities of the CLidar system.

CLidar or camera lidar is a simple, inexpensive technique to measure nighttime tropospheric aerosol profiles. Stars in the raw data images used in the CLidar analysis can also be used to calculate aerosol optical depth simultaneously. A single star can be used with the Langley method or multiple star pairs can be used to reduce the error. The estimated error from data taken under clear sky conditions at Mauna Loa Observatory is approximately +/- 0.01.

Air quality studies on a broad variety of topics from health impacts to source/sink analyses, require information on the distributions of atmospheric aerosols over both altitude and time. An inexpensive, simple to implement, ground-based optical remote sensing technique has been developed to assess aerosol distributions. The technique, called CLidar (Charge Coupled Device Camera Light Detection and Ranging), provides aerosol altitude profiles over time. In the CLidar technique a relatively low-power laser transmits light vertically into the atmosphere. The transmitted laser light scatters off of air molecules, clouds, and aerosols. The entire beam from ground to zenith is imaged using a CCD camera and wide-angle (100 degree) optics which are a few hundred meters from the laser. The CLidar technique is optimized for low altitude (boundary layer and lower troposphere) measurements where most aerosols are found and where many other profiling techniques face difficulties. Currently the technique is limited to nighttime measurements. Using the CLidar technique aerosols may be mapped over both altitude and time. The instrumentation required is portable and can easily be moved to locations of interest (e.g. downwind from factories or power plants, near highways). This paper describes the CLidar technique, implementation and data analysis and offers specifics for users wishing to apply the technique for aerosol profiles. Implications Air quality studies require information on atmospheric aerosols over both altitude and time. A new inexpensive, simple, ground-based optical remote sensing technique assesses aerosol distributions. In the technique, called CLidar, a laser transmits light vertically into the nighttime atmosphere. The laser light scatters off of air molecules, clouds, and aerosols and the entire beam is imaged using a CCD camera and wide-angle optics. CLidar is optimized for boundary layer measurements where most aerosols are found. The instrumentation is portable and can easily be moved to locations of interest (e.g., downwind from factories or power plants, near highways). [ABSTRACT FROM PUBLISHER]