Search

Water is one of the most significant factors for the durability of wood. A common solution is to use a coating to protect and maintain low water content. However, little knowledge exists how the underlying wood substrate affects the water sorption of coated wood. Therefore, the liquid water absorption of coated and uncoated Norway spruce heartwood and sapwood with a variety of densities was measured by letting the panels float freely in the water. The effect of one year weathering of the coatings was also included. Coated heartwood and sapwood had no difference in water absorption in opposite to uncoated spruce. The influence of heartwood and sapwood seemed to have limited impact when a coating hindered the presence of free water. Wood density had a positive effect on the absorption of coated wood, i.e. low absorption for low-density samples, in opposite to uncoated samples. Low-density characteristic also contributed to a lower increase of water absorption after weather degradation, for samples with water-borne coatings. Natural weathering enhanced the effect of wood characteristics on coated samples, likely by an increase of coating permeability.

The aim of the current study was to map the genetic diversity in the haemagglutinin (HA) glycoprotein of influenza A viruses (IAVs) of the H9N2 subtype. Twenty-five H9N2 IAVs were isolated from broiler chickens from March to July 2019. The HA gene was amplified, and phylogenetic analysis was performed to determine the evolutionary relationship. Important antigenic amino acid residues of HA attributed to immune escape and zoonotic potential were compared among H9N2 IAVs. Phylogenetic analysis revealed that sublineage B2 under the G1 lineage in Pakistan was found to be diversified, and newly sequenced H9N2 isolates were nested into two clades (A and B). Mutations linked to the antigenic variation and potential immune escape were observed as G72E (1/25, 4%), A180T (3/25, 12%), and A180V (1/25, 4%). A twofold significant reduction (P < 0.01) in log2 hemagglutination inhibition titers was observed with H9N2 IAV naturally harboring amino acid V180 instead of A180 in HA protein. Moreover, in the last 20 years, complete substitution at residues (T127D, D135N, and L150N) and partial substitution at residues (72, 74, 131, 148, 180, 183, 188, 216, 217, and 249, mature H9 HA numbering) associated with changes in antigenicity were observed. The presence of L216 in all H9N2 IAV isolates and T/V180 in four isolates in the receptor-binding site reveals the potential of these viruses to cross the species barrier to infect human or mammals. The current study observed the circulation of antigenically diverse H9N2 IAV variants that possess potential mutations that can escape the host immune system. Nota de investigación- Mapeo de marcadores genéticos asociados con la antigenicidad y el rango de huéspedes en los virus de la influenza tipo A subtipo H9N2 que infectan a la avicultura en Pakistán. El objetivo del presente estudio fue mapear la diversidad genética en la glicoproteína hemaglutinina (HA) de los virus de la influenza A (IAV) del subtipo H9N2. Se aislaron veinticinco virus de influenza H9N2 de pollos de engorde de marzo a julio del 2019. Se amplificó el gene HA y se realizó un análisis filogenético para determinar la relación evolutiva. Se compararon importantes residuos de aminoácidos antigénicos de la hemaglutinina atribuidos al escape inmunológico y al potencial zoonótico entre los virus de la influenza aviar H9N2. El análisis filogenético reveló que el sublinaje B2 bajo el linaje G1 en Pakistán estaba diversificado, y los aislados de H9N2 recién secuenciados se agruparon en dos clados (A y B). Se observaron mutaciones relacionadas con la variación antigénica y el posible escape inmunológico como los residuos de aminoácidos G72E (1/25, 4%), A180T (3/25, 12%) y A180V (1/25, 4%). Se observó una reducción significativa al doble (P < 0.01) en los títulos de inhibición de la hemaglutinación log2 cuando el virus de la influenza aviar H9N2 albergaba naturalmente el aminoácido V180 en lugar del A180 en la proteína HA. Además, en los últimos 20 años, sustitución completa en los residuos (T127D, D135N y L150N) y sustitución parcial en los residuos (72, 74, 131, 148, 180, 183, 188, 216, 217 y 249, de acuerdo con la numeración de la HA subtipo madura) asociados con cambios en la antigenicidad. La presencia del residuo L216 en todos los aislados de influenza aviar H9N2 y T/V180 en cuatro aislados en el sitio de unión al receptor revela el potencial de estos virus para cruzar la barrera de las especies para infectar a humanos o mamíferos. El estudio actual observó la circulación de variantes antigénicamente diversas del virus de influenza aviar H9N2 que poseen mutaciones potenciales que pueden escapar del sistema inmunológico del huésped. [ABSTRACT FROM AUTHOR]

The block shear strength of Norway spruce (Picea abies (L.) Karst.) glulam joints was tested under low temperatures. Glulam samples were glued with the three of the most common outdoor structural adhesives. The cold temperatures tested were 20, −20, −30, −40, −50, and −60 °C. Within the temperature test range, the block shear strength of the glulam joints was resistant to the effect of temperature. As the temperature decreased, the joints’ block shear strength did not show any significant change. In most cases, phenol-resorcinol-formaldehyde (PRF) adhesive yielded the strongest block shear strength, while melamine-formaldehyde (MF) adhesive yielded the weakest block shear strength. Melamine-urea-formaldehyde (MUF) adhesive yielded similar results to those of MF adhesives for all temperatures tested. The block shear strengths of the glulam joints with PRF, MUF, and MF adhesives were not sensitive to temperature change. The results indicated that PRF, MUF, and MF adhesives are stable for outdoor structural engineered wood construction in cold climates. The results also suggest that the SS-EN 14080 (2013) standard for the block shear method may not be the proper standard for testing differences in shear strength at different temperatures. The EN 302-1 (2011) standard could be more suitable for this purpose.

Change of relative humidity (RH) in surrounding environment can greatly affect the physical and mechanical properties of wood-based panels. Commercially produced acetylated medium density fiberboard (MDF), Medite Tricoya®, was used in this study to predict strength and stiffness under varying humid conditions by separating samples in parallel (//) and perpendicular (⊥) to the sanding directions. Thickness swelling, static moduli of elasticity (MOEstat) and rupture (MORstat), and internal bond (IB) strength were measured at three different humid conditions, i.e., dry (35% RH), standard (65% RH) and wet (85% RH). Internal bond (IB) strength was also measured after accelerated aging test. A resonance method was used to determine dynamic modulus of elasticity (MOEdyn) at the aforementioned humid conditions. Linear regression and finite element (FE) analyses were used to predict the MDF’s static bending behavior. Results showed that dimensional stability, MOEstat, MORstat and IB strength decreased significantly with an increase in RH. No reduction of IB strength was observed after 426 h of accelerated aging test. A multiple regression model was established using MOEdyn and RH values to predict MOEstat and MORstat. In both directions (// and ⊥), highly significant relationships were observed. The predicted and the measured values of MOEstat and MORstat were satisfactorily related to each other, which indicated that the developed model can be effectively used for evaluating the strength and stiffness of Medite Tricoya® MDF samples at any humid condition. Percent errors of two different simulation techniques (standard and extended FE method) showed highly efficient way of simulating the MDF structures with low fidelity.

Previous studies have shown that thermally modified wood (TMW) performs well in outdoor, above-ground conditions in terms of resistance to wood-decaying fungi. Yet, little is known about the development of defects such as checks and the corresponding mechanical properties of TMW in this condition. This experiment focused on the effect of 30 months outdoor above-ground exposure (weathering) on the degree of checking, dynamic stiffness and static bending properties of thermally modified timber (TMT) of Norway spruce. Two board pairs per log were cut from 190 logs; one board of each pair was thermally modified and the other used as control. Then, 90 board pairs were exposed to the weather in south Sweden. Surface checking and axial stiffness were monitored at six-month intervals by using digital photography and non-destructive tests (time-of-flight and resonance method) to monitor changes in the material upon weathering. Finally, all boards were tested destructively in a 4-point static bending test following EN 408 standard. Results showed that weathering had no significance influence on static bending properties of TMT even though the degree of checking was considerably higher in TMT than unmodified timber after weathering. In particular, checks along growth rings were deeper, longer and more common in TMT after weathering, especially on the pith side of boards. The maximum depth of these checks did not depend on board orientation (i.e., which side was exposed) and exceeded limits given in strength grading standards for 7% of the modified boards included. Axial dynamic stiffness determined at 6-month intervals was less influenced by fluctuations in moisture content for TMT compared to unmodified timber, but did not confirm the increase in the degree of checking of TMT. The presence of checks from weathering did influence failure modes in TMT; horizontal shear failure became more frequent and some boards failed in compression.

Small samples from European aspen (Populus tremula L.) were impregnated with carbohydrates oxidized by Fenton’s reagent using water in a vacuum, followed by heating in an oven at 103 °C. An antiswelling efficiency (ASE) of around 45% for wood treated with oxidized glucose and 35% for wood treated with oxidized sucrose was obtained. Samples treated with oxidized carbohydrates gave water repellent effectiveness (WRE) values over 35%. The decrease in cell wall thickness during impregnation was about 18% less in the presence of oxidized glucose than samples only treated with Fenton’s reagent. An ASE of 20% for the wood samples that had been treated with oxidized glucose was obtained after 7 days of soaking in water. The reasons for the improvement in dimensional stability are discussed in this work.

A seroprevalence study was conducted on the presence of Borrelia burgdorferi sensu lato antibodies in 405 camels of two districts of Punjab, Pakistan i.e., Bhakkar and Bahawalpur from May 2019 to January 2021. A questionnaire was used to collect data regarding potential risk factors like gender, age and tick infestation. Serological examination revealed the positive percentage of B. burgdorferi sensu lato in camels was 2.47% (10/405). Risk factor analysis showed that gender, age and tick infestation are significantly (p < 0.05) associated with occurrence of borreliosis in camels. This study may play an important role in the transmission of borreliosis in understanding of other animal species as well as humans in Pakistan. [ABSTRACT FROM AUTHOR]