Search

Fast scanning speed and low-power consumption are becoming progressively more and more important in realizing high-performance chiplet optical phased arrays (OPAs). Here, we successfully demonstrated integrated OPAs with multiple waveguides channels based on thin-film lithium niobate-on-insulator (LNOI) platform. Specifically, two lithium niobate (LN) OPA chips have been implemented with 32 and 48 channels LN waveguides, respectively, enabled by electro-optic modulations, which showcases the low power consumption (1.11 nJ/π) and fast operation speed (14.4 ns), showing obvious advantage of the LNOI platform over others. As results, we experimentally achieved a beam steering with a 62.2° × 8.8° field of view (FOV) and a beam divergence of 2.4° × 1.2° for 32 channels, and a FOV of 40° × 8.8° and a beam divergence of 0.33° × 1.8° for 48 channels. This work also demonstrates the feasibility of LNOI platform in scalable OPA chips.

In recent years, perovskite solar cells (PSCs) have attracted significant attention due to their excellent photoelectric properties. However, several key performance parameters of these devices still fall short of their theoretical limits. Among these parameters, the regulation of open‐circuit voltage (VOC) has been a focal point of intensive research efforts, playing a pivotal role in advancing the efficiency of PSCs. This review first provides an overview of the generation and loss mechanism of VOC. It then discusses the significance of interface engineering in VOC regulation. Recent developments in high‐efficiency PSCs realized via interface engineering have been summarized and categorized into three key areas: surface modification, interface structure optimization, and surface dimensional engineering. Finally, a comprehensive summary of past research in this domain and offered insights into the future prospects of enhancing VOC in PSCs is provided. [ABSTRACT FROM AUTHOR]

In recent years, many researchers have evaluated the sustainable use of waste tire rubber as an aggregate in soil. Its effectiveness has been widely acknowledged. The main objective of this work is to study the influence of rubber fibers on shear strength and pore structure characteristics in relation to expansive soil. In this context, we conducted a series of experiments that were carried out on reinforced expansive soil with rubber fiber contents of 0, 5, 10, 15, and 20%. The results show that the shear strength and maximum dilatation angle increase gradually with rubber fiber content. Due to the pore water pressure and creep effects, the deviator stress and effective cohesion of the samples under the consolidated drained conditions were higher than those under the undrained conditions. The converse was true for the internal angle. The addition of an appropriate amount of (5–10%) rubber fiber can effectively inhibit the development of soil cracks and reduce the porosity of the samples. The results obtained can highlight the beneficial effects of rubber fiber, which is highly desirable in many backfill applications. [ABSTRACT FROM AUTHOR]

Due to their advantages of high rupture strength and long service life, polymer fibers are often used for soil improvement. However, there is no consensus on how the mixing of discrete polymer fibers affects the stress–strain relationship of clays. In this study, a constitutive relationship of polymer fiber‒reinforced clay was established on the basis of the stress–strain relationship between clay and polymer fibers. The elastic–plastic unified hardening (UH) model was employed, and the fiber contribution was introduced based on the UH model. The constitutive relationship of polymer fiber‒reinforced clay considers the anisotropic distribution of the discrete fiber orientation and the relative sliding between the fibers and clay matrix. The model was verified by referring to the results of consolidated undrained (CU) and consolidated drained tests of typical polymer fiber‒reinforced clays in previous studies. A series of CU tests on rubber fiber‒reinforced clay were conducted to validate the model further. The ratio of the simulated results to the experimental results gradually approached 1 with increasing axial strain. The constitutive relationship of polymer fiber‒reinforced clay could provide satisfactory results. Practical Applications: Polymer fiber mixing increases soil strength and enhances the properties of problematic soils, which makes the problematic soils more valuable for engineering applications. Studies have shown that the fibers in the soil tend to be distributed horizontally after the compaction process. With the anisotropic distribution of fiber orientation considered, the authors established a numerical calculation method for the stress–strain relationship of polymer fiber‒reinforced clay. A major objective of this work was to allow the use of computerized numerical analysis methods when performing mechanical analyses of polymer fiber‒reinforced clay, which avoids the need to conduct a large number of shear tests. In this study, a series of consolidated undrained tests of rubber fiber‒reinforced expansive clay were conducted. With the data collected, the numerical calculation method for the stress–strain relationship of polymer fiber‒reinforced clay was verified, and the numerical results agreed with the test results better. [ABSTRACT FROM AUTHOR]