Search

Different SrTiO3 thin films are investigated to unravel the nature of ultra‐low conductivities recently found in SrTiO3 films prepared by pulsed laser deposition. Impedance spectroscopy reveals electronically pseudo‐intrinsic conductivities for a broad range of different dopants (Fe, Al, Ni) and partly high dopant concentrations up to several percent. Using inductively‐coupled plasma optical emission spectroscopy and reciprocal space mapping, a severe Sr deficiency is found and positron annihilation lifetime spectroscopy revealed Sr vacancies as predominant point defects. From synchrotron‐based X‐ray standing wave and X‐ray absorption spectroscopy measurements, a change in site occupation is deduced for Fe‐doped SrTiO3 films, accompanied by a change in the dopant type. Based on these experiments, a model is deduced, which explains the almost ubiquitous pseudo‐intrinsic conductivity of these films. Sr deficiency is suggested as key driver by introducing Sr vacancies and causing site changes (FeSr and TiSr) to accommodate nonstoichiometry. Sr vacancies act as mid‐gap acceptor states, pinning the Fermi level, provided that additional donor states (most probably TiSr••\[{\rm{Ti}}_{{\rm{Sr}}}^{ \bullet \bullet }\]) are present. Defect chemical modeling revealed that such a Fermi level pinning also causes a self‐limitation of the Ti site change and leads to a very robust pseudo‐intrinsic situation, irrespective of Sr/Ti ratios and doping. [ABSTRACT FROM AUTHOR]

The exploration for thermoelectric thin films of complex oxides such as SrTiO3-based oxides is driven by the need for miniaturized harvesting devices for powering the Internet of Things (IoT). However, there is still not a clear consensus in the literature for the underlying influence of film thickness on thermoelectric properties. Here, we report the fabrication of epitaxial thin films of 6% Nb-doped SrTiO3 on (001) (LaAlO3)0.3(Sr2AlTaO6)0.7 (LSAT) single crystal using pulsed laser deposition (PLD) where the film thickness was varied from 2 nm to 68 nm. The thickness dependence shows a subtle increase of tetragonality of the thin film lattice and a gradual drop of the electrical conductivity, the density of charge carriers, and the thermoelectric Seebeck coefficient as the film thickness decreases. DFT-based calculations show that ∼2.8% increase in tetragonality results in an increased splitting between t2g and eg orbitals to ∼42.3 meV. However, experimentally observed tetragonality for films between 68 to 13 nm is only 0.06%. Hence, the effect of thickness on tetragonality is neglected. We have discussed the decrease of conductivity and the Seebeck coefficient based on the decrease of carriers and change in the scattering mechanism, respectively. [ABSTRACT FROM AUTHOR]

Strontium titanate (SrTiO3) has received much attention due to its wide range of potential applications, including in electrochemical devices such as solid oxide fuel cells and capacitors. The stability and safety features of SrTiO3 led to the development of promising electrodes for Li-ion batteries. Here, we use density functional theory simulations to examine the incorporation of lithium from its gas-phase and bulk forms. The results show that a single Li atom is thermodynamically stable in bulk SrTiO3 with respect to its gas-phase and slightly unfavorable compared to its bulk. Multiple Li incorporation up to six is also considered, and the incorporation is exoergic with respect to both gas-phase and bulk forms. Charge analysis confirmed the presence of Li+ ions in the lattice. Li incorporation turns the insulating nature of SrTiO3 into metallic and non-magnetic into magnetic. Lithium incorporation facilitates the formation of Sr, Ti, and O vacancies. The loss of Li2O is exoergic, suggesting that oxygen vacancy mediated self-diffusion will be promoted. [ABSTRACT FROM AUTHOR]

The thermoelectric performance of nanostructured low dimensional silicon and silicon-germanium has been functionally compared device-wise. The arrays of nanowires of both materials, grown by a VLS-CVD (Vapor-Liquid-Solid Chemical Vapor Deposition) method, have been monolithically integrated in a silicon micromachined structure in order to exploit the improved thermoelectric properties of nanostructured silicon-based materials. The device architecture helps to translate a vertically occurring temperature gradient into a lateral temperature difference across the nanowires. Such thermocouple is completed with a thin film metal leg in a unileg configuration. The device is operative on its own and can be largely replicated (and interconnected) using standard IC (Integrated Circuits) and MEMS (Micro-ElectroMechanical Systems) technologies. Despite SiGe nanowires devices show a lower Seebeck coefficient and a higher electrical resistance, they exhibit a much better performance leading to larger open circuit voltages and a larger overall power supply. This is possible due to the lower thermal conductance of the nanostructured SiGe ensemble that enables a much larger internal temperature difference for the same external thermal gradient. Indeed, power densities in the μW/cm2 could be obtained for such devices when resting on hot surfaces in the 50–200 °C range under natural convection even without the presence of a heat exchanger. [ABSTRACT FROM AUTHOR]

Strontium titanate (SrTiO3) has received much attention due to its wide range of potential applications, including in electrochemical devices such as solid oxide fuel cells and capacitors. The stability and safety features of SrTiO3 led to the development of promising electrodes for Li-ion batteries. Here, we use density functional theory simulations to examine the incorporation of lithium from its gas-phase and bulk forms. The results show that a single Li atom is thermodynamically stable in bulk SrTiO3 with respect to its gas-phase and slightly unfavorable compared to its bulk. Multiple Li incorporation up to six is also considered, and the incorporation is exoergic with respect to both gas-phase and bulk forms. Charge analysis confirmed the presence of Li+ ions in the lattice. Li incorporation turns the insulating nature of SrTiO3 into metallic and non-magnetic into magnetic. Lithium incorporation facilitates the formation of Sr, Ti, and O vacancies. The loss of Li2O is exoergic, suggesting that oxygen vacancy mediated self-diffusion will be promoted. [ABSTRACT FROM AUTHOR]