Search

Unconventional oil and gas formations are abundant, have become an increasingly important part of the global energy supply, and are attracting increasing attention from the industry. Predicting key reservoir properties plays a significant role in both geological science and subsurface engineering workflows. With the advent of horizontal well drilling and multiple-stage hydraulic fracturing, the Montney Shale formation is one of the most promising and productive shale plays in Canada. However, very few academic papers discuss its in situ stress, reservoir pressure, and permeability, which are essential for the development of the Montney Shale. The objective of this study is to analyze the geo-stress, the pore pressure, and several key reservoir properties by using diagnostic fracture injection test (DFIT) data from the Montney Shale. One horizontal well from the Wapiti field has been analyzed with a set of DFIT data, and its results show that the general pressure and Gdp/dG responses from Well-A indicate a signature of height recession/transverse storage. In the study, the Tangent Line method, the Compliance method, and the Variable Compliance method have been applied to estimate the key reservoir properties. As a result, the Well-A DFIT analysis estimates that the closure pressure is ranging from 34.367 to 39.344 MPa, contributing to the stress gradient from 14.09 to 16.13 KPa/m for the formation. The pore pressure is ranging from 20.82 to 24.58 MPa, contributing to the pore pressure gradient from 8.54 to 10.07 KPa/m for the formation. The porosity is ranging from 3% to 6%. These reservoir properties are contoured cross the Montney Shale formation. Using the DFIT's numerical simulation and history matching, the reservoir permeability is 0.024 md, fracture length is 13.44 m, and fracture geometries are analyzed by different models. Moreover, the physics behind the DFIT are analyzed and discussed in detail. For the first time, three different analysis methods have been applied to estimate a series of key reservoir properties for the case wells in the Montney Shale formation. This approach can not only reduce the potential prediction error caused by a single method application but also increase the persuasiveness of the assessment and save time, ensuring the efficient implementation of engineering operations. Given the significance of quantifying in situ stress and reservoir pore pressure in unconventional hydrocarbon exploration and development, this study could help the operator to quickly understand the stress regimes, the fracture geometry, and the formation properties of the Montney Shale formation in the Wapiti field. Furthermore, the interpreted results demonstrated in this paper are adding substantial business value to the asset, especially in terms of improving the hydraulic fracturing design and, thus, accelerating the cashflow from production. [ABSTRACT FROM AUTHOR]

Unconventional oil and gas formations are abundant, have become an increasingly important part of the global energy supply, and are attracting increasing attention from the industry. Predicting key reservoir properties plays a significant role in both geological science and subsurface engineering workflows. With the advent of horizontal well drilling and multiple-stage hydraulic fracturing, the Montney Shale formation is one of the most promising and productive shale plays in Canada. However, very few academic papers discuss its in situ stress, reservoir pressure, and permeability, which are essential for the development of the Montney Shale. The objective of this study is to analyze the geo-stress, the pore pressure, and several key reservoir properties by using diagnostic fracture injection test (DFIT) data from the Montney Shale. One horizontal well from the Wapiti field has been analyzed with a set of DFIT data, and its results show that the general pressure and Gdp/dG responses from Well-A indicate a signature of height recession/transverse storage. In the study, the Tangent Line method, the Compliance method, and the Variable Compliance method have been applied to estimate the key reservoir properties. As a result, the Well-A DFIT analysis estimates that the closure pressure is ranging from 34.367 to 39.344 MPa, contributing to the stress gradient from 14.09 to 16.13 KPa/m for the formation. The pore pressure is ranging from 20.82 to 24.58 MPa, contributing to the pore pressure gradient from 8.54 to 10.07 KPa/m for the formation. The porosity is ranging from 3% to 6%. These reservoir properties are contoured cross the Montney Shale formation. Using the DFIT’s numerical simulation and history matching, the reservoir permeability is 0.024 md, fracture length is 13.44 m, and fracture geometries are analyzed by different models. Moreover, the physics behind the DFIT are analyzed and discussed in detail. For the first time, three different analysis methods have been applied to estimate a series of key reservoir properties for the case wells in the Montney Shale formation. This approach can not only reduce the potential prediction error caused by a single method application but also increase the persuasiveness of the assessment and save time, ensuring the efficient implementation of engineering operations. Given the significance of quantifying in situ stress and reservoir pore pressure in unconventional hydrocarbon exploration and development, this study could help the operator to quickly understand the stress regimes, the fracture geometry, and the formation properties of the Montney Shale formation in the Wapiti field. Furthermore, the interpreted results demonstrated in this paper are adding substantial business value to the asset, especially in terms of improving the hydraulic fracturing design and, thus, accelerating the cashflow from production.

Global energy modeling exercises project significant deployment of CO2 capture and storage (CCS) to bridge the gap between India's pledged climate commitments and the 1. 5°C target. Despite advances in laboratory analyses and process modeling, the information on geologic storage potential in India is limited. Prior studies indicate that the vast majority of storage potential exists in saline aquifers (50–300 Gt-CO2); though, this might be overestimated. These estimates also estimate the theoretical potential in coal seams to be

Unconventional formations have been actively developed in the US since 2008. However, it is challenging to quantify the impact of technological advancement and geology on production. In addition, the economics of unconventionals is not well-understood. In this paper, we studied five major unconventional formations in the US: the Bakken, Eagleford, Haynesville, Marcellus, and Wolfcamp formations. We used historical data to quantify the impact of technological and geological variations on production. To accomplish this, we identified four phases of unconventional development over the past 12 years during which drilling and completion technology, initial investment, and commodity prices were similar: Phases 1–4. Using statistical analysis, we compared well performance of each phase. Then, we generated type curves for each phase for economic studies. Initial analysis shows that between January 2008 and December 2019, 60,611 horizontal wells were completed in these formations, producing about 8.185 billion barrels of oil, 90 trillion cubic feet of gas, and generating an estimated $816 billion in gross revenue. For the statistical analysis, the level of uncertainty ( P 10 / P 90 ratio) reduced from Phase 1 to Phase 4 across all formations, suggesting consistent improvements in well productivity over time while county-level analysis shows spatial disparity in well performance. We infer that technology drives temporal changes while geology drives spatial differences in well performance. From economic analysis, Phase 4 type wells had the best production performance, partly, due to improved drilling and completion efficiency. It was also because operators targeted their best acreage to maximize their asset's potential. [ABSTRACT FROM AUTHOR]

In petroleum engineering, imbibition is one of the most important elements for the hydraulic fracturing and water flooding processes, when extraneous fluids are introduced to the reservoir. However, in unconventional shale formations, osmosis has been often overlooked, but it can influence the imbibition process between the working fluid and the contacting formation rocks. The main objective of this study is to understand effects of fluid–rock interactions for osmosis-associated imbibition in unconventional formations. This paper summarizes previous studies on imbibition in unconventional formations, including shale, tight carbonate, and tight sandstone formations. Various key factors and their influence on the imbibition processes are discussed. Then, the causes and role of osmotic forces in fluid imbibition processes are summarized based on previous and recent field observations and laboratory measurements. Moreover, some numerical simulation approaches to model the osmosis-associated imbibition are summarized and compared. Finally, a discussion on the practical implications and field observations of osmosis-associated imbibition is included.