Search

Metal‐organic framework (MOF) based heterostructures, which exhibit enhanced or unexpected functionality and properties due to synergistic effects, are typically synthesized using post‐synthetic strategies. However, several reported post‐synthetic strategies remain unsatisfactory, considering issues such as damage to the crystallinity of MOFs, presence of impure phases, and high time and energy consumption. In this work, we demonstrate for the first time a novel route for constructing MOF based heterostructures using radiation‐induced post‐synthesis, highlighting the merits of convenience, ambient conditions, large‐scale production, and notable time and energy saving. Specifically, a new HKUST‐1@Cu2O heterostructure was successfully synthesized by simply irradiating a methanol solution dispersed of HKUST‐1 with gamma ray under ambient conditions. The copper source of Cu2O was directly derived from in situ radiation etching and reduction of the parent HKUST‐1, without the use of any additional copper reagents. Significantly, the resulting HKUST‐1@Cu2O heterostructure exhibits remarkable catalytic performance, with a catalytic rate constant nearly two orders of magnitude higher than that of the parent HKUST‐1. [ABSTRACT FROM AUTHOR]

As a critical radioactive anionic contaminant, traditional adsorbents primarily remove iodate (IO3−) through ion exchange or hard acid‐hard base interactions, but suffer from limited affinity and capacity. Herein, employing the synergistic effect of ion exchange and redox, we successfully synthesized a redox‐active cationic polymer network (SCU‐CPN‐6, [C9H10O2N5 ⋅ Cl]n) by merging guanidino groups with ion‐exchange capability and phenolic groups with redox ability via a Schiff base reaction. SCU‐CPN‐6 exhibits a groundbreaking adsorption capacity of 896 mg/g for IO3−. The inferior adsorption capacities of polymeric networks containing only redox (~0 mg/g) or ion exchange (232 mg/g) fragments underscore the synergistic "1+1>2" effect of the two mechanisms. Besides, SCU‐CPN‐6 shows excellent uptake selectivity for IO3− in the presence of high concentrations of SO42−, Cl−, and NO3−. Meanwhile, a high distribution coefficient indicates its exemplary deep‐removal performance for low IO3− concentration. The synergic strategy not only presents a breakthrough solution for the efficient removal of IO3− but also establishes a promising avenue for the design of advanced adsorbents for diverse applications. [ABSTRACT FROM AUTHOR]

In conjunction with theoretical calculations, the in vitro and in vivo uranyl binding capabilities of a bidentate picolinate (Pic) ligand and its pentadentate derivative (H2dpa) are investigated. The planar N3O2-donor configuration of H2dpa matches the typical pentagonal-bipyramid coordination geometry of uranyl, demonstrating a remarkable removal preference for uranyl in the kidneys. [ABSTRACT FROM AUTHOR]

The development of adsorbent materials for effective capture of radioactive iodomethane (CH3I) from the off-gas of used nuclear fuel reprocessing, remains a significant and challenging line of research because currently state-of-art adsorbents still suffer from low binding affinity with CH3I. Here, we proposed a brand-new adsorption topological structure by developing a 2D interdigitated layered framework, named SCU-20, featuring slide-like channel with multiple active sites for CH3I capture. The responsive rotating-adaptive aperture of SCU-20 enables the optimal utilization of all active sites within the pore for highly selective recognition and capture of CH3I. A record-breaking CH3I uptake capacity of 1.84 g/g was achieved under static sorption conditions with saturated CH3I vapor. Both experimental and theoretical findings demonstrated that the exceptional uptake of SCU-20 towards CH3I can be attributed to the confined physical electrostatic adsorption of F sites, coupled with the chemical nitrogen methylation reaction with uncoordinated N atoms of pyrazine. Moreover, dynamic CH3I uptake capacity potentially allows for the capture of CH3I in simulated real-world off gas reprocessing conditions. This study highlights the potential of SCU-20 as a promising candidate for efficient capture of iodine species and contributes to the development of effective solutions for radioactive iodine remediation. [ABSTRACT FROM AUTHOR]

Large volumes of water containing tritium are generated during the operation, decommissioning, and incident-management of nuclear installations and related facilities, and are expected to increase with the ongoing expansion of nuclear power generation. If released into the environment, this water could pose a substantial environmental threat to living organisms. However, conventional isotope separation techniques, such as cryogenic distillation and catalytic exchange, are inadequate for efficiently isolating significant quantities of low-level tritiated water because of the complex machinery and excessive energy required, and the potential for hydrogen-gas detonation. In contrast, water distillation (WD), as a traditional technology, has the unique advantages of simple operation, no corrosive and toxic substances, and no hydrogen explosion risk, but problems of small separation coefficient and low efficiency always exist in this technique. However, the separation effect of WD can be effectively improved by improving the process variables in the process of WD, such as temperature, distillation column diameter, and packing dimensions, so as to adapt WD to the separation of industrial tritiated water. This study provides a thorough exposition of the basic principles and distinctive features of water distillation and examines the effect of various operational parameters on separation efficiency to adapt the process for the industrial separation of tritiated water. The impact of various process variables on the separation efficiency of tritiated water via distillation was investigated, and results show that optimizing these variables can markedly improve the separation efficiency of water distillation. In particular, decreasing the dimensions of the packing material or altering its properties can lead to higher separation factors and lower residual tritiated water concentration. These findings suggest that water distillation can be used for the separation of tritiated water. By optimizing its operational parameters, water distillation can become a viable method for the industrial separation of tritiated water and is expected to play a significant role in this field in the future.

Efficient adsorption of palladium ions from acid nuclear waste solution is crucial for ensuring the safety of vitrification process for radioactive waste. However, the limited stability and selectivity of most current adsorbents hinder their practical applications under strong acid and intense radiation conditions. Herein, to address these limitations, we designed and synthesized an aryl‐ether‐linked covalent organic framework (COF‐316‐DM) grafted dimethylthiocarbamoyl groups on the pore walls. This unique structure endows COF‐316‐DM with high stability and exceptional palladium capture capacity. The robust polyarylether linkage enables COF‐316‐DM to withstand irradiation doses of 200 or 400 kGy of β/γ ray. Furthermore, COF‐316‐DM demonstrates fast adsorption kinetics, high adsorption capacity (147 mg g−1), and excellent reusability in 4 M nitric acid. Moreover, COF‐316‐DM exhibits remarkable selectivity for palladium ions in the presence of 17 interference ions, simulating high level liquid waste scenario. The superior adsorption performance can be attributed to the strong binding affinity between the thioamide groups and Pd2+ ions, as confirmed by the comprehensive analysis of FT‐IR and XPS spectra. Our findings highlight the potential of COFs with robust linkers and tailored functional groups for efficient and selective capture of metal ions, even in harsh environmental conditions. [ABSTRACT FROM AUTHOR]