Search

AIM: To investigate the expression changes of MMP-12 during the long-term axon regeneration induced by the lens injury after the optic nerve clamp trauma in sprague-dawley(SD)rats.METHODS: The optic nerve injury model and lens injury model of SD rats were established, and the 24 experimental animals were divided into control group; lens injury group; optic nerve injury group; lens injury combined with optic nerve injury group, with 6 rats in each group. Reference transcriptome sequencing was used to analyze the expression changes of differentially expressed genes in the injured optic nerve region, and relevant differentially expressed genes with high expression were screened. Quantitative real-time polymerase chain reaction(qRT-PCR)and enzyme-linked immunosorbent assay(ELISA)were used to quantify the expression changes of matrix metalloproteinase-12(MMP-12)in the injured optic nerve region.RESULTS: The Principal Component Analysis of transcriptome sequencing indicated that lens injury combined with optic nerve injury was the principal component of gene expression change. Analysis of gene expression differences showed that the expression of MMP-12 gene was up-regulated in the lens injury combined with optic nerve injury group. The mRNA expression level of MMP-12 in the lens injury combined optic nerve injury group was up-regulated compared with the control group, the optic nerve injury group and the lens injury group at 14d and 21d after successful modeling(P

Photonic reservoir computing (PRC) is a special hardware recurrent neural network, which is featured with fast training speed and low training cost. This work shows a wavelength-multiplexing PRC architecture, taking advantage of the numerous longitudinal modes in a Fabry–Perot (FP) semiconductor laser. These modes construct connected physical neurons in parallel, while an optical feedback loop provides interactive virtual neurons in series. We experimentally demonstrate a four-channel wavelength-multiplexing PRC architecture with a total of 80 neurons. The clock rate of the multiplexing PRC reaches as high as 1.0 GHz, which is four times higher than that of the single-channel case. In addition, it is proved that the multiplexing PRC exhibits a superior performance on the task of signal equalization in an optical fiber communication link. This improved performance is owing to the rich neuron interconnections both in parallel and in series. In particular, this scheme is highly scalable owing to the rich mode resources in FP lasers.

Imbuing emotional intent serves as a crucial modulator of music improvisation during active musical instrument playing. However, most improvisation-related neural endeavors have been gained without considering the emotional context. This study attempts to exploit reproducible spatio-spectral electroencephalogram (EEG) oscillations of emotional intent using a data-driven independent component analysis framework in an ecological multiday piano playing experiment. Through the four-day 32-ch EEG dataset of 10 professional players, we showed that EEG patterns were substantially affected by both intra- and inter-individual variability underlying the emotional intent of the dichotomized valence (positive vs. negative) and arousal (high vs. low) categories. Less than half (3–4) of the 10 participants analogously exhibited day-reproducible ( $\ge $ three days) spectral modulations at the right frontal beta in response to the valence contrast as well as the frontal central gamma and the superior parietal alpha to the arousal counterpart. In particular, the frontal engagement facilitates a better understanding of the frontal cortex (e.g., dorsolateral prefrontal cortex and anterior cingulate cortex) and its role in intervening emotional processes and expressing spectral signatures that are relatively resistant to natural EEG variability. Such ecologically vivid EEG findings may lead to better understanding of the development of a brain-computer music interface infrastructure capable of guiding the training, performance, and appreciation for emotional improvisatory status or actuating music interaction via emotional context.

Spatially resolved fluid-flow modulation and its corresponding integration becomes a crucial aspect to consider when designing high-performing paper-based analytical devices. As such, high demand exists for cost-effective techniques able to selectively control flow in patternable regions of the device. In this regard, a solution composed of potassium alum and animal glue; sizing materials used in the fabrication of calligraphy Xuan paper, is successfully adapted for the first time in a revolutionary approach to efficiently modulate the capillary flow in paper microfluidic channels. Flow delays are achieved by coating the substrate systematically through the variation of parameters such as the ratio of alum to glue, the concentration of alum-glue in the solution, and the number of subsequent coating layers of alum-glue. Moreover, digitized patterning with alum-glue is developed to achieve programmable wicking profiles of accelerating, decelerating, and quasi-linear flow displacement by alternating coated and uncoated zones in the channel. Additionally, the influence of alum-glue when performing biometric assays is investigated by performing a horseradish peroxidase activity colorimetric assay and found to have negligible effects on reading, where a negligible difference of 5.2% was observed in an assay performed in a coated paper substrate, compared to an uncoated one.

Introduction: Anterior cervical discectomy and fusion (ACDF) is widely accepted as the gold standard surgical procedure for treating cervical radiculopathy and myelopathy. However, there is concern about the low fusion rate in the early period after ACDF surgery using the Zero-P fusion cage. We creatively designed an assembled uncoupled joint fusion device to improve the fusion rate and solve the implantation difficulties. This study aimed to assess the biomechanical performance of the assembled uncovertebral joint fusion cage in single-level ACDF and compare it with the Zero-P device.Methods: A three-dimensional finite element (FE) of a healthy cervical spine (C2−C7) was constructed and validated. In the one-level surgery model, either an assembled uncovertebral joint fusion cage or a zero-profile device was implanted at the C5–C6 segment of the model. A pure moment of 1.0 Nm combined with a follower load of 75 N was imposed at C2 to determine flexion, extension, lateral bending, and axial rotation. The segmental range of motion (ROM), facet contact force (FCF), maximum intradiscal pressure (IDP), and screw−bone stress were determined and compared with those of the zero-profile device.Results: The results showed that the ROMs of the fused levels in both models were nearly zero, while the motions of the unfused segments were unevenly increased. The FCF at adjacent segments in the assembled uncovertebral joint fusion cage group was less than that that of the Zero-P group. The IDP at the adjacent segments and screw–bone stress were slightly higher in the assembled uncovertebral joint fusion cage group than in those of the Zero-P group. Stress on the cage was mainly concentrated on both sides of the wings, reaching 13.4–20.4 Mpa in the assembled uncovertebral joint fusion cage group.Conclusion: The assembled uncovertebral joint fusion cage provided strong immobilization, similar to the Zero-P device. When compared with the Zero-P group, the assembled uncovertebral joint fusion cage achieved similar resultant values regarding FCF, IDP, and screw–bone stress. Moreover, the assembled uncovertebral joint fusion cage effectively achieved early bone formation and fusion, probably due to proper stress distributions in the wings of both sides.

In recent years, cervical spondylosis has become one of the most common chronic diseases and has received much attention from the public. Magnetic resonance imaging (MRI) is the most widely used imaging modality for the diagnosis of degenerative cervical spondylosis. The manual identification and segmentation of the cervical spine on MRI makes it a laborious, time-consuming, and error-prone process. In this work, we collected a new dataset of 300 patients with a total of 600 cervical spine images in the MRI T2-weighted (T2W) modality for the first time, which included the cervical spine, intervertebral discs, spinal cord, and spinal canal information. A new instance segmentation approach called SeUneter was proposed for cervical spine segmentation. SeUneter expanded the depth of the network structure based on the original U-Net and added a channel attention module to the double convolution of the feature extraction. SeUneter could enhance the semantic information of the segmentation and weaken the characteristic information of non-segmentation to the screen for important feature channels in double convolution. In the meantime, to alleviate the over-fitting of the model under insufficient samples, the Cutout was used to crop the pixel information in the original image at random positions of a fixed size, and the number of training samples in the original data was increased. Prior knowledge of the data was used to optimize the segmentation results by a post-process to improve the segmentation performance. The mean of Intersection Over Union (mIOU) was calculated for the different categories, while the mean of the Dice similarity coefficient (mDSC) and mIOU were calculated to compare the segmentation results of different deep learning models for all categories. Compared with multiple models under the same experimental settings, our proposed SeUneter’s performance was superior to U-Net, AttU-Net, UNet++, DeepLab-v3+, TransUNet, and Swin-Unet on the spinal cord with mIOU of 86.34% and the spinal canal with mIOU of 73.44%. The SeUneter matched or exceeded the performance of the aforementioned segmentation models when segmenting vertebral bodies or intervertebral discs. Among all models, SeUneter achieved the highest mIOU and mDSC of 82.73% and 90.66%, respectively, for the whole cervical spine.

Abstract One of the main objectives of microfluidic paper-based analytical devices is to present solutions particularly, for applications in low-resource settings. Therefore, screen-printing appears to be an attractive fabrication technique in the field, due to its overall simplicity, affordability, and high-scalability potential. Conversely, the minimum feature size attained using screen-printing is still rather low, especially compared to other fabrication methods, mainly attributed to the over-penetration of hydrophobic agents, underneath defined patterns on masks, into the fiber matrix of paper substrates. In this work, we propose the use of the over-penetration to our advantage, whereby an appropriate combination of hydrophobic agent temperature and substrate thickness, allows for the proper control of channel patterning, rendering considerably higher resolutions than prior arts. The implementation of Xuan paper and nail oil as novel substrate and hydrophobic agent, respectively, is proposed in this work. Under optimum conditions of temperature and substrate thickness, the resolution of the screen-printing method was pushed up to 97.83 ± 16.34 μm of channel width with acceptable repeatability. It was also found that a trade-off exists between achieving considerably high channel resolutions and maintaining high levels of repeatability of the process. Lastly, miniaturized microfluidic channels were successfully patterned on pH strips for colorimetric pH measurement, demonstrating its advantage on negligible sample-volume consumption in nano-liter range during chemical measurement and minimal interference on manipulation of precious samples, which for the first time, is realized on screen-printed microfluidic paper-based analytical devices.

Abstract Background Heterotopic ossification (HO) is a common complication after cervical disc replacement (CDR). Biomechanical factors including endplate coverage and intervertebral disc height change may be related to HO formation. However, there is a dearth of quantitative analysis for endplate coverage, intervertebral height change and their combined effects on HO. Methods Patients who underwent single-level or two-level CDR with Prestige-LP were retrospectively reviewed. Clinical outcomes were evaluated through Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI) score, and visual analogue scale (VAS) score. Radiological data, including the prosthesis-endplate depth ratio, intervertebral height change, posterior heterotopic ossification (PHO) and angular parameters, were collected. Logistic regression analysis was used to identify the potential risk factors. Receiver operating characteristic curves were plotted and the cut-off values of each potential factors were calculated. Results A total of 138 patients with 174 surgical segments were evaluated. Both the prosthesis-endplate depth ratio (P

ObjectiveTo conduct a high-level meta-analysis of the RCTs to evaluate perioperative steroids use in the management of fusion rate, dysphagia, and VAS following anterior cervical spine surgery for up to 1 year.MethodsWe searched the database PubMed, EMBASE, Web of Science, Cochrane Library, Google Scholar, Ovid, and ClinicalTrials.gov without time restriction to identify RCTs that evaluate the effectiveness of perioperative steroids after anterior cervical spine surgery. A subgroup analysis was undertaken to investigate the effects of intravenous and local steroids. This study was registered in the PROSPERO database prior to initiation (CRD42022313444).ResultsA total of 14 RCTs were eligible for final inclusion. This meta-analysis showed that steroids could achieve lower dysphagia rate (p

BackgroundMore than 70 percent of the world's population is tortured with neck pain more than once in their vast life, of which 50–85% recur within 1–5 years of the initial episode. With medical resources affected by the epidemic, more and more people seek health-related knowledge via YouTube. This article aims to assess the quality and reliability of the medical information shared on YouTube regarding neck pain.MethodsWe searched on YouTube using the keyword “neck pain” to include the top 50 videos by relevance, then divided them into five and seven categories based on their content and source. Each video was quantitatively assessed using the Journal of American Medical Association (JAMA), DISCERN, Global Quality Score (GQS), Neck Pain-Specific Score (NPSS), and video power index (VPI). Spearman correlation analysis was used to evaluate the correlation between JAMA, GQS, DISCERN, NPSS and VPI. A multiple linear regression analysis was applied to identify video features affecting JAMA, GQS, DISCERN, and NPSS.ResultsThe videos had a mean JAMA score of 2.56 (SD = 0.43), DISCERN of 2.55 (SD = 0.44), GQS of 2.86 (SD = 0.72), and NPSS of 2.90 (SD = 2.23). Classification by video upload source, non-physician videos had the greatest share at 38%, and sorted by video content, exercise training comprised 40% of the videos. Significant differences between the uploading sources were observed for VPI (P = 0.012), JAMA (P < 0.001), DISCERN (P < 0.001), GQS (P = 0.001), and NPSS (P = 0.007). Spearman correlation analysis showed that JAMA, DISCERN, GQS, and NPSS significantly correlated with each other (JAMA vs. DISCERN, p < 0.001, JAMA vs. GQS, p < 0.001, JAMA vs. NPSS, p < 0.001, DISCERN vs. GQS, p < 0.001, DISCERN vs. NPSS, p < 0.001, GQS vs. NPSS, p < 0.001). Multiple linear regression analysis suggested that a higher JAMA score, DISCERN, or GQS score were closely related to a higher probability of an academic, physician, non-physician or medical upload source (P < 0.005), and a higher NPSS score was associated with a higher probability of an academic source (P = 0.001) than of an individual upload source.ConclusionsYouTube videos pertaining to neck pain contain low quality, low reliability, and incomplete information. Patients may be put at risk for health complications due to inaccurate, and incomplete information, particularly during the COVID-19 crisis. Academic groups should be committed to high-quality video production and promotion to YouTube users.

Abstract Objective To preliminarily evaluate the safety and efficacy of the uncovertebral joint fusion cage in a goat model of cervical spine interbody fusion. Methods Twenty-four healthy adult goats were randomly assigned to one of the two following groups: Group A, goats were implanted with an uncovertebral joint fusion cage combined with a local autograft and Group B, goats were implanted with a non-profile cage filled with a local autograft. The goats were prospectively evaluated for 24 weeks and then were sacrificed for evaluation. X-rays, CT and micro-CT scanning, and undecalcified bone histological analysis were used for the evaluation of fusion. Results 75.0% (9/12) of the goats in Group A were evaluated as having fusion at 12 weeks, compared to 41.7% (5/12) in Group B. 83.3% (10/12) of the goats in Group A were evaluated as having fusion at 24 weeks compared to 58.3% (7/12) in Group B. The fusion grading scores in Group A were significantly higher than that in Group B both at 12 weeks and 24 weeks (P

BackgroundThe clinical features of urticaria have not been fully illustrated.ObjectivesTo demonstrate clinical features of urticaria in different areas of southern and northern China.MethodsIn this hospital-based multicenter study, outpatients with urticaria filled in a questionnaire during the initial visit and follow-up (once per week, lasting for a month).ResultsOverall, 1,715 outpatients with urticaria with a mean age of 37.86 ± 16.08 years (range = 0.5–87 years) were recruited. The median disease duration was 1.94 ± 4.31 years (range = 0–58 years). More itching was observed in the northern areas higher than that in the southern areas (99.5 vs 94.1%, P < 0.001). The incidence of pain, arthralgia, and family history in southern areas was higher than that in northern areas (5.1 vs 1.1%, 9.6 vs 0, 10.6% vs 3.2%, P < 0.001). The leading subtypes of specified urticaria were chronic spontaneous urticaria (81.4%) and symptomatic dermographism (35.9%). The incidence of symptomatic dermographism and cold urticaria in the southern areas was lower than that in the northern areas (31.8 vs. 50.3%, 4 vs. 8.5%, P < 0.001). Allergic diseases were the most common concomitant disorders of urticaria. More than half of the patients had to avoid certain food, such as fish-prawn-crab (30.7%) and alcohol (20%). Ebastine (41.1%) was the most commonly prescribed drug. The disease duration negatively correlated with the severity of itching and number of wheals (>50/24H) (Spearman’s rank correlation test, p < 0.001).ConclusionThis study provides a profile of clinical characteristics of urticaria in China and filled the gap in the field of regional comparative studies on urticaria.

Background Ceruminous glands are modified apocrine glands of the external auditory canal (EAC). Malignant tumours within the ceruminous glands are extremely rare, and the most common histological type is adenoid cystic carcinoma (ADCC), which has high recurrence and metastasis risks. Although a few cases of metastatic ADCC from other head and neck glands have been reported, metastatic ADCC originating from the ceruminous gland are extremely rare. Case presentation We present an unusual case of spinal metastases of ADCC from ceruminous glands. A 61-year-old woman complaining of low back pain and both lower limbs pain was referred to our department. The primary ceruminous tumour was resected 26 years ago and recurred 6 years later, which was treated by radiotherapy. Three years ago, she presented with low back pain and was diagnosed as multiple lungs and bone metastases. The patient underwent tumour excision, decompression and fusion. The biopsy revealed metastatic ADCC. The symptoms were alleviated after surgery. Conclusions ADCC of EAC is a pernicious malignant tumour that is characterized by slow-growing patterns and a high predisposition to recurrence and metastasis. Differential diagnoses of ADCC and benign tumours in the EAC are challenging, particularly at early stages. We report a rare case of ceruminous ADCC with a prolonged clinical history as well as spinal metastasis and highlight the significance of regular follow-ups for patients undergoing tumour excision in the EAC.

Introduction: Anterior cervical discectomy and fusion (ACDF) is a widely accepted surgical procedure in the treatment of cervical radiculopathy and myelopathy. A solid interbody fusion is of critical significance in achieving satisfactory outcomes after ACDF. However, the current radiographic techniques to determine the degree of fusion are inaccurate and radiative. Several animal experiments suggested that the mechanical load on the spinal instrumentation could reflect the fusion process and evaluated the stability of implant. This study aims to investigate the biomechanical changes during the fusion process and explore the feasibility of reflecting the fusion status after ACDF through the load changes borne by the interbody fusion cage.Methods: The computed tomography (CT) scans preoperatively, immediately after surgery, at 3 months, and 6 months follow-up of patients who underwent ACDF at C5/6 were used to construct the C2–C7 finite element (FE) models representing different courses of fusion stages. A 75-N follower load with 1.0-Nm moments was applied to the top of C2 vertebra in the models to simulate flexion, extension, lateral bending, and axial rotation with the C7 vertebra fixed. The Von Mises stress at the surfaces of instrumentation and the adjacent intervertebral disc and force at the facet joints were analyzed.Results: The facet contact force at C5/6 suggested a significantly stepwise reduction as the fusion proceeded while the intradiscal pressure and facet contact force of adjacent levels changed slightly. The stress on the surfaces of titanium plate and screws significantly decreased at 3 and 6 months follow-up. A markedly changed stress distribution in extension among three models was noted in different fusion stages. After solid fusion is achieved, the stress was more uniformly distributed interbody fusion in all loading conditions.Conclusions: Through a follow-up study of 6 months, the stress on the surfaces of cervical instrumentation remarkably decreased in all loading conditions. After solid intervertebral fusion formed, the stress distributions on the surfaces of interbody cage and screws were more uniform. The stress distribution in extension altered significantly in different fusion status. Future studies are needed to develop the interbody fusion device with wireless sensors to achieve longitudinal real-time monitoring of the stress distribution during the course of fusion.

Electroencephalogram (EEG)-based affective brain-computer interfaces (aBCIs) have been attracting ever-growing interest and research resources. Whereas most previous neuroscience studies have focused on single-day/-session recording and sensor-level analysis, less effort has been invested in assessing the fundamental nature of non-stationary EEG oscillations underlying emotional responses across days and individuals. This work thus aimed to use a data-driven blind source separation method, i.e., independent component analysis (ICA), to derive emotion-relevant spatio-spectral EEG source oscillations and assess the extent of non-stationarity. To this end, this work conducted an 8-day music-listening experiment (i.e., roughly interspaced over 2 months) and recorded whole-scalp 30-ch EEG data from 10 subjects. Given the large size of the data (i.e., from 80 sessions), results indicated that EEG non-stationarity was clearly revealed in the numbers and locations of brain sources of interest as well as their spectral modulation to the emotional responses. Less than half of subjects (two to four) showed the same relatively day-stationary (source reproducibility >6 days) spatio-spectral tendency towards one of the binary valence and arousal states. This work substantially advances the previous work by exploiting intra- and inter-individual EEG variability in an ecological multiday scenario. Such EEG non-stationarity may inevitably present a great challenge for the development of an accurate, robust, and generalized emotion-classification model.

Objective: To investigate the effect of postgraduate Shengsui Jiangu Capsule on tumor necrosis factors TNF-α, transforming growth factor TGF-ß1 and empty bone lacuna in rats with alcoholic osteoporosis. Method: 120 SD rats were randomly divided into 4 groups, 30 rats in each group: blank group, model group, western medicine control group and traditional Chinese medicine intervention group. Liquor gavage was used to model the disease, except for the blank group. The western medicine control group was gavaged with a suspension of calcium carbonate and afad3, while the Chinese medicine intervention group was gavaged with a suspension of Shengsui Jiangu capsules combined with 0.9% saline solution injection. The values of TNF-α and TGF-β1 in femora were measured after 8, 12, and 16 weeks of intervention. After dissecting out the femoral head using the HE(hematoxylin-eosin staining) staining method, the bone lacunae were observed under a light microscope, and the empty bone lacunae rate was calculated for intergroup comparison. Results: Compared with the blank group, the model group had a significantly higher percentage of TNF-α and empty bone lacunae, and a significantly lower percentage of TGF-β1 (P < 0.01). Compared with the model group, the rates of TNF-α and empty bone lacunae in the western medicine control group and the Chinese medicine intervention group were significantly decreased, and TGF-β1 was significantly increased (P < 0.01). The traditional Chinese medicine intervention group was more effective than the western medicine control group (P < 0.05). Conclusion: Shengsui Jiangu capsule attenuates the expression of TNF-α, enhances the expression of TGF-β1, decreases the rate of empty bone lacunae, and achieves a protective effect against alcoholic osteoporosis in rats with alcoholic osteoporosis. [ABSTRACT FROM AUTHOR]