Search

An explosion field is random and nonuniform, and test sensors can be damaged by fragments during blast wave monitoring. When accurately and comprehensively obtaining the experimental data and the dynamic distributions from an explosion field, the quantity and positioning of sensors during blast wave monitoring are important parameters. In this paper, an optimization method of sensor placement based on an improved inertia and adaptive particle swarm optimization (IIAPSO) algorithm is proposed to solve this problem. This work considers two new aspects: 1) the adaptive mutation mechanism and the inertia weight into classic particle swarm optimization (PSO) and 2) the propagation law of blast waves, the data errors and the probability of sensor damage during IIAPSO. These mechanisms are employed to enhance the global search ability and to increase data accuracy. First, the 12 benchmark functions are utilized to test the performance of the IIAPSO. The performance of the IIAPSO is compared with PSO, linear decreasing weighted particle swarm optimization (LDW-PSO) and adaptive particle swarm optimization (APSO) in terms of parameter accuracy and convergence speed. The results confirm that the proposed IIAPSO is more successful than PSO, LDW-PSO and APSO algorithms. Finally, the IIAPSO is used to optimize the sensor placement in an explosion field. The simulation and experimental results show that the feasibility of this algorithm is demonstrated.

Background To develop a preclinical thromboembolic occlusion model for studying revascularization strategies. Methods Clot analog with barium sulfate was injected into the distal aorta in 9 New Zealand white rabbits. The situation of aorta occlusion was compared among fibrin-rich (n=4), red blood cell (RBC)-rich (n=3), and whole blood clot analogs (n=2) using digital subtraction angiography. Arterial geometries, histologic features and circumferential stretch of the distal aorta in rabbits were compared with the common carotid artery in swine and the distal internal carotid artery (ICA) in humans. Aspiration thrombectomy and mechanical thrombectomy using a stent retriever were performed in two rabbits. Results The aortic bifurcation was occluded after a single delivery of clot in 4 cases. It was occluded after the second clot injection in the 5 remaining rabbits. Fragmentation of RBC-rich clots occurred during clot injection in 2 cases. The mean diameters of the distal aorta and right common iliac artery in rabbits were 3.7±0.4 and 2.8±0.3 mm, respectively; the mean diameters of human ICA, and first and second segments of the middle cerebral artery (M1, M2) were 3.6±0.4, 3.1±0.4, and 2.4±0.4 mm, respectively. Arterial revascularization was achieved in both rabbits. Geometric, mechanical and histological factors of the distal aorta in rabbit were more close to human distal ICA than swine carotid artery. Conclusion Arterial occlusion can be achieved at the aortic bifurcation in rabbits, which is comparable to human ICA bifurcation. This thrombectomy model has the potential to be used for testing of thrombectomy devices. [ABSTRACT FROM AUTHOR]

Background Notwithstanding the widespread implementation of flow diverters (FDs) in the treatment of intracranial aneurysms, the exact mechanism of action of these devices remains elusive. We aimed to advance the understanding of cellular responses to FD implantation using a 3D tissue-engineered in vitro aneurysm model. Methods Aneurysm-like blood vessel mimics (aBVMs) were constructed by electrospinning polycaprolactone nanofibers onto desired aneurysm-like geometries. aBVMs were seeded with human aortic smooth muscle cells (SMCs) followed by human aortic endothelial cells (ECs). FDs were then deployed in the parent vessel of aBVMs covering the aneurysm neck and were cultivated for 7, 14, or 28 days (n=3 for each time point). The EC and SMC coverage in the neck was measured semi-quantitatively. Results At day 7, the device segment in contact with the parent vessel was partially endothelialized. Also, the majority of device struts, but not pores, at the parent vessel and neck interface were partially covered with ECs and SMCs, while device struts in the middle of the neck lacked cell coverage. At 14 days, histology verified a neointimal-like lining had formed, partially covering both the struts and pores in the center of the neck. At 28 days, the majority of the neck was covered with a translucent neointimal-like layer. A higher degree of cellular coverage was seen on the struts and pores at the neck at 28 days compared with both 7 and 14 days. Conclusion aBVMs can be a valuable alternative tool for evaluating the healing mechanisms of endovascular aneurysm devices. [ABSTRACT FROM AUTHOR]

Background CT is the most commonly used imaging modality for acute ischemic stroke evaluation. There is growing interest to use pre-operative imaging to characterize clot composition in stroke. We performed an in-vitro study examining the ability of various CT techniques in differentiation between different clot types. Methods Five clot types with varying fibrin and red blood cells (RBCs) densities (5% RBC and 95% fibrin; 25% RBC and 75% fibrin; 50% RBC and 50% fibrin; 75% RBC and 25% fibrin; 95% RBC and 5% fibrin) were prepared and scanned using various CT scanning protocols (single-energy, dual-energy, photon-counting detector CT, mixed images, and virtual monoenergetic images). Martius Scarlett Blue trichrome staining was performed to confirm the composition of each clot. Mean CT values of each type of clot under different scanning protocol were calculated and compared. Results Mean CT values of the CT numbers in the five clot specimens for 5%, 25%, and 50% RBC clot were similar across modalities, and increased significantly for 75% and 95% RBC clots (P<0.0001). Mean CT values are highest in the Mono +50 keV images in each type of clot, and they were also significantly higher than all other imaging protocols (P<0.001). Dual-energy CT with Mono +50 keV images showed the greatest difference between attenuation in each type of clot. Conclusion Mono +50 keV dual-energy CT scan may be helpful for differentiating between RBC-rich and fibrin-rich thrombi seen in large-vessel occlusion patients. [ABSTRACT FROM AUTHOR]

Optimizing the adaptive circuit of piezoelectric sensors is important in accurately measuring blast waves. This study analyzed the impact of the bandpass cut-off frequencies and quality factor of adaptive circuits on shock wave measurements. We proposed a Multi-objective particle swarm optimization based on weighted Pareto-dominance sort (W-MOPSO) for optimizing the multi-objective function of an adaptive circuit in order to improve precision during shock wave measurements. W-MOPSO obtained a Pareto-optimal solution set through Pareto-dominant sorting of global optimal solutions to the weighted sum of a multi-objective function. The relative mean error in the optimized adaptive circuit mostly ranged between −2% and +2%. Simulations were used to analyze the impact of the optimized adaptive circuit on shock wave measurements. The effectiveness of W-MOPSO was verified through a real-world experiment using a TNT explosive and blast wave gauges. W-MOPSO provided a basis for adapter circuit design and optimization in shock wave measurement. [ABSTRACT FROM AUTHOR]

To obtain the peak pressure distribution of explosion field near the ground, an improved reconstruction method for interpolation of blast overpressure data from the finite measuring points was studied. According to the peak attenuation law of shock wave on the propagation path and the attenuation characteristic of the wave front after passing through the measured points, the polynomial fitting function of peak attenuation of shock wave near the ground is constructed by using the least square method. Using the peak attenuation polynomial of shock wave constrain the radial interpolation of biharmonic spline surface interpolation algorithm (BSSIA) to realize the interpolation conforming the propagation law of shock wave and ensure the interpolation convergence. The root-mean-squared error (RMSE) and the maximum relative error (MRE) before and after the improvement were computed by comparing the peaks with empirical formula data. The improvement is evident as the RMSE decreased from 14.12kPa to 0.22kPa and the MRE decreased from 23.91% to 0.37%. The peak reconstructed by the improved biharmonic spline surface interpolation algorithm (IBSSIA) and BSSIA with test data, the overpressure peak distribution obtained by IBSSIA is in good agreement with empirical result and consistent with the explosion image. [ABSTRACT FROM AUTHOR]

Background Flow diverters (FDs) are increasingly used in the treatment of intracranial aneurysms, and carry the risk of thromboembolic complications, even in patients treated with dual antiplatelet therapy. The effect of FDs on the downstream vascular is unknown. The aim of the study was to investigate vascular wall pulse wave velocity (PWV) and contractility changes following FD treatment in a rabbit model. Methods FDs (Pipeline embolic Device, Medtronic inc., irvine, california, Usa) were implanted in the aorta of normal rabbits and sham-operated aorta were used as controls (n=6 per group). Pulse wave imaging with ultrafast ultrasound at 1600 frames per second (Vantage, Verasonics, inc., Kirkland, WA) was performed in the vessel wall distal to FD prior to device implantation and at 8- week follow-up to measure the PWV. Force contraction vascular reactivity studies were conducted in the aortic rings using an organ bath. Results The difference in mean PWV in the followup compared with pre-implantation was significantly higher in the distal vessels compared with sham controls (1.18 m/s [SD=0.54] vs. 0.37 m/s [sD=1.09], P=0.03). conversely, the aortic segments distal to the FD exhibited a 55% increase in vascular contractility compared with proximal segments (P=0.002). We observed a significant positive correlation between mean PWV and mean vascular contractility. Conclusion Implantation of FD was associated with increased PWV and vascular contractility, suggesting that FD implantation causes changes to the vascular wall. Further studies are needed to understand the clinical implication of changes in vascular PWV and contractility. [ABSTRACT FROM AUTHOR]

background and purpose Vertebrobasilar dolichoectatic and fusiform aneurysms (VBDAs) are known to have a poor natural history, with high rates of growth, rupture, and stroke. The purpose of this study was to identify hemodynamic characteristics that differ between VBDAs associated with growth, rupture, and stroke. Materials and methods VBDAs with CT angiography or MR angiography followed longitudinally without treatment were studied. Unstable aneurysms were defined as those that grew or ruptured during follow-up. aneurysms associated with stroke were defined as those associated with posterior circulation infarct at follow-up. Baseline data, including demographics, comorbidities, and aneurysm morphology and size were collected. image based computational fluid dynamics models were created and run under pulsatile flow conditions. relevant hemodynamic and geometric variables were calculated and compared between groups (stable vs unstable and no stroke vs stroke) using the Wilcoxon test. results a total of 37 VBDas were included (24 stable, 13 unstable; 30 no stroke, 7 stroke). Unstable aneurysms had lower shear rates (P=0.05), blood flow velocity (P=0.03), and lower vorticity (P=0.049) than stable aneurysms. in addition, unstable aneurysms had higher mean oscillatory shear indices (P=0.001). There were no differences in the hemodynamic characteristics of aneurysms in the stroke group compared with the nonstroke group. Conclusion This small study suggests there may be hemodynamic differences between unstable and stable VBDas. Unstable VBDas appear to be under lower flow conditions with lower velocity, vorticity, and shear rates, and have more oscillatory flow. There was no difference in the hemodynamic characteristics of aneurysms in the stroke and no stroke group. [ABSTRACT FROM AUTHOR]

Background Intracranial aneurysms represent a significant health concern and are poorly understood despite decades of research. Our study focused on understanding temporal patterns of endothelial cell distribution in different spatial locations within the aneurysm early after creation in a rabbit model. Methods Elastase induced saccular aneurysms were created in rabbits and harvested on day 1 (n=3) and after 2 (n=5), 4 (n=4), 8 (n=5), and 12 (n=6) weeks. Sham operated controls (n=3) were harvested on the same day. Aneurysm and control tissue samples were subjected to en face whole mount CD31 staining for endothelial cells. Semiquantitative scoring was performed on the basis of endothelial coverage of the vessel wall (proximal, middle, and distal portions of the aneurysm dome). Mixed effects models were used to assess the effect of time and aneurysm section on endothelial coverage. Results Aneurysmal segments were near completely de-endothelialized at 4 and 8 weeks but had re-endothelialized by 12 weeks. Compared with controls, aneurysms at all time points showed decreased endothelialization, but the difference was only significant compared with the 4 and 8 week groups. Both time (P=0.03) and aneurysm section (P=0.07) were significantly associated with the degree of endothelialization. Proximal locations showed increased endothelialization compared with distal locations (P=0.03). Conclusion In experimental aneurysms of rabbits, endothelial cells regress during the first month after creation, followed by ascending re-endothelialization that stays incomplete. These findings suggest that re-population of endothelial cells comes from resident cells in the adjacent parent artery and that deranged hemodynamics may affect full reconstitution of endothelial cells long term. [ABSTRACT FROM AUTHOR]

Background Semiquantitative scales correlate histopathologic findings in the walls of human aneurysms with rupture status. Objective To apply a semiquantitative scale to the rabbit elastase-induced aneurysm model to determine whether rabbit histologic types mimic the full range of histologic subtypes of humans. Materials and methods Twenty-seven elastase- induced female rabbit aneurysms were studied, harvested at 2 weeks (n=5) and 12 weeks (n=22). Paraffin-embedded sections received hematoxylin-eosin and Verhoeff-Van gieson staining. immunohistochemistry was performed for a-smooth muscle actin and GD31 for endothelial cells. A semiquantitative scale was used for scoring based on human aneurysm tissue, divided into four subtypes according to cellular and extracellular matrix findings: type A, linear organized smooth muscle cells (SMGs) and intact endothelium; type B, thickened wall with disorganized, proliferating SMGs; type G, thick, collagenized and hypocellular wall with or without organizing thrombosis, and type D, extremely thin, hypocellular wall. Separate scoring was performed of the aneurysm neck and proximal and distal zones. results Findings compatible with all subtypes of human aneurysm tissue were identified. Types A and G were found in 13 (48%) and 11 (41%) of 27 aneurysms and in the proximal and distal wall at both time points. Type B was found in 16 aneurysms (59%), exclusively at the neck at both time points; type D, in 14 aneurysms (52%), exclusively at proximal and distal zones of 12-week aneurysms. Conclusions The wall of elastase-induced rabbit aneurysm demonstrates histologic findings similar to the four categories of human cerebral aneurysms based on cellular and extracellular wall content. [ABSTRACT FROM AUTHOR]

Purpose Long-term occlusion of coiled aneurysms frequently fails, probably because of poor intrasaccular healing and inadequate endothelialization across the aneurysm neck. The purpose of this study was to determine if attachment of autologous mesenchymal stem cells (MSCs) to platinum coils would improve the healing response in an elastase-induced aneurysm model in rabbits. Materials and methods With approval from the institutional animal care and use committee, aneurysms were created in rabbits and embolized with control platinum coils (Axium; Medtronic) (n=6) or coils seeded ex vivo with autologous adipose-tissue MSCs (n=7). Aneurysmal occlusion after embolization was evaluated at 1 month with angiography. Histological samples were analyzed by gross imaging and graded on the basis of neck and dome healing on H&E staining. Fibrosis was evaluated using a ratio of the total area presenting collagen. Endothelialization of the neck was quantitatively analyzed using CD31 immunohistochemistry. χ² and Student's t-test were used to compare groups. Results Healing score (11.5 vs 8.0, p=0.019), fibrosis ratio (10.3 vs 0.13, p=0.006) and endothelialization (902 262 μm² vs 31 810 μm², p=0.041) were significantly greater in the MSC group. The MSC group showed marked cellular proliferation and thrombus organization, with a continuous membrane bridging the neck of the aneurysm. Angiographic stable or progressive occlusion rate was significantly lower in the MSC group (0.00, 95% CI 0.00 to 0.41) compared with controls (0.67, 95% CI 0.22 to 0.96) (p=0.02). Conclusions Autologous MSCs attached to platinum coils significantly improve histological healing, as they result in improved neck endothelialization and collagen matrix formation within the aneurysm sac. [ABSTRACT FROM AUTHOR]

Shape memory polymers can be programmed into a secondary geometry and recovered to their primary geometry with the application of a controlled stimulus. Porous shape memory polymer foam scaffolds that respond to body temperature show particular promise for embolic medical applications. A limitation for the minimally invasive delivery of these materials is an inherent lack of X-ray contrast. In this work, a triiodobenzene containing a monomer was incorporated into a shape memory polymer foam material system to chemically impart X-ray visibility and increase material toughness. Composition and process changes enabled further control over material density and thermomechanical properties. The proposed material system demonstrates a wide range of tailorable functional properties for the design of embolic medical devices, including X-ray visibility, expansion rate, and porosity. Enhanced visualization of these materials can improve the acute performance of medical devices used to treat vascular malformations, and the material porosity provides a healing scaffold for durable occlusion. [ABSTRACT FROM AUTHOR]

Objective To assess the feasibility of using MicroFil polymer perfusion to detect concomitant saccular aneurysms in an intracranial arterial dolichoectasia (IADE) model in mice, and to report detailed histomorphometric features of these aneurysms. Materials and methods IADE models were created in C57/BL6 mice via microsurgical injection of 25 mU elastase into the cisterna magna. The cerebral vasculature was perfused with MicroFil polymer and harvested at 1, 3, and 7 days, and 2 and 4 weeks (n=8 for each group). IADE was defined by a tortuosity index >10 combined with a 25% increase in diameter of the A1 segment of the anterior cerebral artery (ACA), internal carotid artery (ICA), or basilar artery compared with the baseline of controls, which received heatinactivated elastase. Saccular aneurysm occurrence rate, location, and morphological parameters were investigated using macroscopic and microscopic analysis. Results IADE was present in 95% (36/38) of the subjects, with a mortality rate of 5% (2/40). Fifteen concomitant saccular aneurysms were detected in 8 (21%) of the 38 surviving mice, including 6 at the posterior communicating artery, 1 along the ACA, 2 along the anterior communicating artery complex, 3 along the ICA, and 3 along the middle cerebral artery. Rupture was confirmed in two aneurysms. Histological examination indicated that the aneurysms develop via arterial-wall remodelling, which is characterized by internal elastic lamina disruptions and muscular layer discontinuity in the media. Conclusions The proportion of subjects developing saccular aneurysms in addition to IADE in our mouse model is similar to the 15% of patients with IADE who have concomitant saccular aneurysms. [ABSTRACT FROM AUTHOR]

Background and purpose Flow diverters (FD) can cause rare but devastating delayed aneurysm ruptures in which matrix metalloproteinases (MMPs) have been potentially implicated. Concomitant coiling or antiinflammatory medications have been proposed to prevent the risk of delayed ruptures. The aim of this study was to evaluate concomitant coiling and ciclosporin in regulating the expression of MMPs in FD-treated aneurysms. Materials and methods Elastase-induced aneurysms were created in 20 rabbits. Aneurysms were treated with (1) FD alone; (2) FD with concomitant coiling; (3) FD+ ciclosporin; or (4) left untreated as controls. At sacrifice, MMP levels were analyzed by zymography. Kruskal--Wallis one-way non-parametric ANOVA was performed for each enzyme. If significant results were observed for the Kruskal--Wallis test, pairwise group comparisons were performed using Dunn's test with Bonferroni multiple-testing correction. Results Significant differences were observed among groups for pro-MMP9 (p=0.0337). Pairwise comparison demonstrated higher levels of pro-MMP9 with concomitant coiling compared with untreated aneurysms (p=0.012), with higher though not significantly different levels of pro-MMP9 in FD with concomitant coiling versus FD alone. While not statistically significant, trends were noted regarding differences in active-MMP9 across groups, with a lower level of active-MMP9 with concomitant coiling compared with the other FD groups. No significant differences were observed for pro- or active-MMP2 across groups, or for FD + ciclosporin compared with FD alone. Conclusions FD implantation increases the level of pro-MMP9 expression in aneurysms. Provocative trends regarding modulation of active-MMP9 expression with concomitant coiling suggest the need for larger confirmatory preclinical studies. Anti-inflammatory treatment with ciclosporin appears to have a minimal biological effect. Trial registration number R01NS076491 [ABSTRACT FROM AUTHOR]

Background The extent, rate, and source of endothelialization following coil embolization of saccular aneurysms remains poorly understood. We performed a whole tissue mount, dual immunohistochemical analysis of experimental aneurysms to characterize the state of endothelialization over time after platinum coil embolization. Method and material Elastase-induced rabbit aneurysms were created and treated with bare platinum coils. Samples were harvested at 4 and 8 weeks (n=6 for each). En face whole tissue mount staining with antibodies to CD31 and α-smooth muscle actin was used to identify endothelial cells and smooth muscle cells, respectively. Sytox green stain was used to demonstrate nuclear morphology for identification of inflammatory cells. The extent of endothelialization was measured in relation to the aneurysm neck-parent artery interface. Results At 4 weeks after coil embolization, very localized membranous tissue and neoendothelial cells were detected on the coil loops immediately adjacent to the parent artery-neck interface, but the remainder of the coil loops remained devoid of endothelial cells. At 8 weeks neoendothelial cells were more confluent over the coils than at 4 weeks, and extended up to 900 mm from the parent artery-neck interface. However, the surfaces of the coils farther away than this region harbored no endothelial cells. Scattered inflammatory cells, including neutrophils and monocytes, were seen on the coil surface at the neck central area, where the coil surface was bare at the 4 and 8 weeks' follow-up. Conclusions Platinum coil embolization supports gradual but limited endothelialization, where endothelial cells migrate directly from the adjacent parent artery. [ABSTRACT FROM AUTHOR]

Copyright of Automatika: Journal for Control, Measurement, Electronics, Computing & Communications is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background and purpose Implanted, actual flow diverter pore density is thought to be strongly influenced by proper matching between the device size and parent artery diameter. The objective of this study was to characterize the correlation between device sizing, metal coverage, and the resultant occlusion of aneurysms following flow diverter treatment in a rabbit model. Methods Rabbit saccular aneurysms were treated with flow diverters (iso-sized to proximal parent artery, 0.5 mm oversized, or 1.0 mm oversized, respectively, n=6 for each group). Eight weeks after implantation, the angiographic degree of aneurysm occlusion was graded (complete, near-complete, or incomplete). The ostium of the explanted aneurysm covered with the flow diverter struts was photographed. Based on gross anatomic findings, the metal coverage and pore density at the ostium of the aneurysm were calculated and correlated with the degree of aneurysm occlusion. Results Angiographic results showed there were no statistically significant differences in aneurysm geometry and occlusion among groups. The mean parent artery diameter to flow diverter diameter ratio was higher in the 1.0 mm oversized group than in the other groups. Neither the percentage metal coverage nor the pore density showed statistically significant differences among groups. Aneurysm occlusion was inversely correlated with the ostium diameter, irrespective of the size of the device implanted. Conclusions Device sizing alone does not predict resultant pore density or metal coverage following flow diverter implantation in the rabbit aneurysm model. Aneurysm occlusion was not impacted by either metal coverage or pore density, but was inversely correlated with the diameter of the ostium. [ABSTRACT FROM AUTHOR]

Background and purpose Mechanisms of both healing and complications, including spontaneous aneurysm rupture, remain unclear following flow diverter treatment. The aim of this study was to compare gene expression of various key molecules involved in the healing of aneurysms, between aneurysms treated with microcoils and flow diverters. Methods Saccular aneurysms were created in rabbits. Aneurysms were treated with coils (n=6) or flow diverters (n=6). Aneurysms were harvested at 4 weeks following treatment and used for gene expression and zymography experiments. Genes with a fold change of 1.2 or more were considered upregulated whereas those with a fold change of 0.8 or less were considered downregulated. Results All coil embolized aneurysms were completely occluded at follow-up. Two aneurysms were occluded and the remaining four samples were incompletely occluded in the flow diverter treated group. The following genes were expressed at lower levels in the flow diverter group compared with the coiled aneurysm group: proteinases (matrix metalloproteinases 2 and 9), cellular markers (endothelial nitric oxide synthase and smooth muscle actin), and structural proteins (collagens and fibronectin). Genes related to inflammation (tumor necrosis factor α and monocyte chemoattractant protein 1) were upregulated in flow diverter treated aneurysms compared with coil embolized aneurysms. Notably, the enzymatic activity of active matrix metalloproteinase 9 was high in aneurysms treated with flow diverters. Conclusions Our findings may provide improved understanding of rupture risk and healing following aneurysm treatment and inform development of therapies aimed at lowering rupture risk and accelerating healing. [ABSTRACT FROM AUTHOR]

Copyright of Automatika: Journal for Control, Measurement, Electronics, Computing & Communications is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Biological and biophysical factors have been shown to play an important role in the initiation, progression, and rupture of intracranial aneurysms. The purpose of this study was to evaluate the association between hemodynamic forces and markers of vascular remodeling in elastase-induced saccular aneurysms in rabbits. Elastase-induced aneurysms were created at the origin of the right common carotid artery in rabbits. Hemodynamic parameters were estimated using computational fluid dynamic simulations based on 3-D-reconstructed models of the vasculature. Expression of matrix metalloproteinases (MMPs), their inhibitors (TIMPs) and markers of vascular remodeling were measured in different spatial regions within the aneurysms. Altered expression of biological markers relative to controls was correlated with the locations of subnormal time-averaged wall shear stress (WSS) but not with the magnitude of pressure. In the aneurysms, WSS was low and expression of biological markers was significantly altered in a time-dependent fashion. At 2 weeks, an upregulation of active-MMP-2, downregulation of TIMP-1 and TIMP-2, and intact endothelium were found in aneurysm cavities. However, by 12 weeks, endothelial cells were absent or scattered, and levels of pro- and active-MMP-2 were not different from those in control arteries, but pro-MMP-9 and both TIMPs were upregulated. These results reveal a strong, spatially localized correlation between diminished WSS and differential expression of biological markers of vascular remodeling in elastase-induced saccular aneurysms. The ability of the wall to function and maintain a healthy endothelium in a low shear environment appears to be significantly impaired by chronic exposure to low WSS. [ABSTRACT FROM AUTHOR]

Introduction: The purpose of this study was to create morphologically reproducible elastase-induced model aneurysms in rabbits. Methods: We created 120 elastase-induced aneurysms in rabbits using two different methods: the standard technique (group 1, n=62) and a modified technique (group 2, n=58). In the standard technique a small cut-down with a focal area of exposure of the mid-right common carotid artery (RCCA) was employed, while in the modified technique the RCCA was completely exposed to its origin. We measured aneurysm sizes (neck diameter, width and height) in the two groups. The aneurysm sizes were compared between the two groups using Student's t test, and the standard deviations of the aneurysm sizes were compared between the groups using the F test. Results: The mean aneurysm neck size, width and height in group 1 were 3.4±1.2mm, 3.8±1.0mm and 8.0±1.7 mm, respectively, and in group 2, were 3.2±0.9 mm, 3.7± 0.6 mm and 9.1±1.8 mm, respectively. The differences in mean aneurysm neck and width between the two groups were not significant (P>0.05). However, there were significant differences in the standard deviation of these two parameters between the two groups (P<0.05 and P<0.01, respectively). The mean aneurysm height in group 2 was larger than in group 1 (P<0.001), but no significant difference in the standard deviation of this parameter between the two groups was found (P>0.05). Conclusion: The results indicate that more consistent aneurysm diameters can be created using the modified technique. [ABSTRACT FROM AUTHOR]

Conventional intra-arterial digital subtraction angiography (IADSA), which necessitates surgical exposure and ligation of the femoral artery, is an invasive and expensive method of evaluation for experimental elastase-induced aneurysms in rabbits. The purpose of this study was to examine and validate intra-venous digital subtraction angiography (IVDSA) as an alternative to IADSA by comparing their diagnostic accuracies. We performed both IVDSA and IADSA for 24 elastase-induced saccular aneurysms in a rabbit model, 1 month following creation. Aneurysm sizes (neck, width and height) from both the IVDSA and IADSA procedures were evaluated and measured. Comparison of the aneurysm sizes between IVDSA and IADSA were performed with the Wilcoxon paired signed-rank test. All the aneurysms were seen clearly in both the IVDSA and IADSA techniques. Mean sizes of the IVDSA aneurysm neck, width and height were 3.41±0.80 mm, 3.61±0.93 mm and 8.07±2.11 mm, respectively. Mean sizes of the IADSA aneurysm neck, width and height were 3.43±0.80 mm, 3.66±0.92 mm and 8.16±2.25 mm, respectively. No significant difference was found in the sizes of the aneurysm neck, width and height between the two groups ( P=0.311, P=0.086 and P=0.258, respectively). IVDSA appears to be an alternative method for evaluating elastase-induced aneurysms in rabbits. [ABSTRACT FROM AUTHOR]

Introduction To explore the patency and growth of surgical sidewall aneurysms in rabbits. Materials and methods Forty sidewall aneurysms were created in the right common carotid artery (RCCA). Intravenous digital subtraction angiography (DSA) through the ear vein was performed immediately after creation. Three weeks later, intra-arterial DSA through the femoral artery was performed. Aneurysm sizes (neck, width, height and volume) were measured and calculated immediately after creation and 3 weeks later. Aneurysm patency after creation was evaluated. Differences in aneurysm sizes immediately after creation and 3 weeks later were compared using the Student's t test. Results Aneurysms and the parent artery remained patent in 38 (95%) of the 40 rabbits 3 weeks after creation. Two other rabbits (5%) showed aneurysm occlusion. There was a significant difference in aneurysm neck size 3 weeks after creation (3.6±0.9 mm vs 2.4±0.4 mm, p<0.0001). The aneurysm became wider 3 weeks later (5.8±1.5 mm vs 4.3±1.2 mm, p<0.0001). Aneurysm length was also larger than immediately after creation (6.1±1.3 mm vs 4.3±1.4 mm, p<0.0001). The aneurysm volume was larger than that created immediately (127.5±89.4 mm3 vs 51.0±34.9 mm3, p<0.0001). Conclusions The patency rate of sidewall aneurysms in rabbits is high. The aneurysm keeps growing for at least 3 weeks after creation. [ABSTRACT FROM AUTHOR]

Flow diverting stents are braided, metallic endoluminal devices widely used to treat intracranial aneurysms. Bioresorbable flow diverters (BRFDs) are gaining traction as the next generation of flow diverter technology. BRFDs aim to occlude and heal the aneurysm before safely dissolving into the body, mitigating or eliminating complications associated with the permanent presence of conventional flow diverters such as thromboembolism and stenosis. Additional putative advantages of a BRFD include a reduction in metal induced medical imaging artifacts, a restoration of physiological vasoreactivity, and allowing physicians to re-access the aneurysm if an additional procedure is required. In this current study, iron-manganese-nitrogen (FeMnN) alloy BRFDs and permanent control FDs composed of an industry standard Cobalt-Nickel-Chromium alloy were deployed in the rabbit aorta. MicroCT and SEM corrosion analysis determined the FeMnN wire volumes and cross-sectional areas had reduced approximately 85 % and 95 % after 3- and 6-months implantation duration, respectively. Histological analysis demonstrated the BRFDs exhibited suitable biocompatibility, with no cases of in-stent thrombosis, clinically significant stenosis, or adverse tissue responses observed. Immunohistochemistry revealed the neointimas surrounding the BRFDs featured a confluent endothelium covering several layers of smooth muscle cells, with macrophages adjacent to the device wires. The macrophages were able to penetrate the corrosion product and were observed transporting corrosion products away from the implant site. This current work provides primary in vivo corrosion and biocompatibility data to the field for FeMn alloys, which we feel will stimulate and inform the design of next-generation bioresorbable endovascular devices.

Purpose: Endovascular occlusion of aneurysms with the use of detachable platinum coils has proved to be a safe and durable alternative to the traditional surgical clipping. The aim of the present study is to understand the mechanism of apoptosis in aneurysm embolized with platinum coils using rabbit elastase-induced aneurysm model. Materials & Methods: Elastase-induced saccular aneurysms were created at the origin of right common carotid artery in thirty rabbits. Aneurysms were allowed to mature for 8 weeks then 20 aneurysms were embolized using platinum coils by endovascular means. Ten uncoiled aneurysms were used as controls. After 2 weeks (n=10) and 4 weeks (n=10) of implantation, aneurysm samples were harvested for apoptotic studies. Results: Expression of pro-caspases-3, -8 and -9 were elevated in coiled aneurysm embolized with platinum coils at both time points when compared with uncoiled aneurysm and control left carotid artery. Cleaved caspases-3, -8 and -9 were found to be expressed only at 4 weeks after embolization. Cells within aneurysm cavity were TUNEL positive at 4 weeks only. Expression of minor necrosis-α (TNF-α) was high in coiled aneurysm when compared with controls. There was no significant difference in the expression of Fas-ligand among groups. Decreased expression of antiapoptotic protein, Bcl-2, and increased expression of proapoptotic proteins, Bad, Bax and Bid, were observed in coiled aneurysms at both time points. Conclusion: Activation apoptosis in aneurysms after embolization with platinum coils is mediated by both TNF-α mediated-extrinsic and Bcl-2 mediated-intrinsic pathway. [ABSTRACT FROM AUTHOR]