Search

Background: This study aims to investigate the trend of doctor shopping among patients with rotator cuff tear (RCT) before undergoing surgery and to examine the relevance of these findings to the public. Methods: A survey was conducted of 326 patients from 10 hospitals (male, 176; female, 150) who underwent arthroscopic rotator cuff repair (ARCR) for symptomatic RCT between September 2019 and February 2020. A questionnaire was used to obtain data regarding the type of medical care service, medical institutions visited before surgery, number of treatments received, and cost of treatment. Results: A total of 326 patients (87%) received treatment at least once at another medical institution before visiting the hospital where the surgery was performed. Patients visited an average of 9.4 health providers or physicians for shoulder pain before visiting the hospital where surgery was performed. Among the 326 patients, 148 (45%) visited more than two medical institutions and spent an average of 641,983 Korean won (KRW; $466, 50,000–5,000,000 KRW) before surgery. Medical expenses before surgery were proportional to the number of medical institutions visited (P=0.002), symptom duration (P=0.002), and initial visual analog scale (VAS) pain score (P=0.007) but were not associated with sex, age, VAS pain score immediately before surgery, or RCT size. Conclusions: Medical expense before ARCR was associated with the severity of preoperative pain and duration of symptoms. After onset of shoulder symptoms, patients should visit as soon as possible a hospital that has surgeons who specialize in shoulder repair to prevent unnecessary medical expense and proper treatment. [ABSTRACT FROM AUTHOR]

The subscapularis is the strongest muscle among the rotator cuff muscles, and it provides a coupled balanced force across the glenohumeral joint by resisting the infraspinatus in axial plane and the shearing force of deltoid in the coronal plane. It is important to repair subscapularis tears to maintain the coupled balanced force. Subscapularis tendon tears are difficult to diagnose and treat. Only a small portion of the subscapularis tendon is visualized during routine arthroscopy, as it is largely covered by the middle and inferior glenohumeral ligaments. Various repair techniques have been described in the literature. Here, we describe the anterolateral viewing portal for better visualization of subscapularis and our preferred technique, the lasso-loop technique, which provides better tissue grip and improved functional outcome. [Display omitted] [ABSTRACT FROM AUTHOR]

Shoulder impingement syndrome causes critical disorders such as rotator cuff tear or superior labrum anterior to posterior (SLAP) lesion in both the general public and in athletes whose sports involve throwing. Nevertheless, the biomechanics of the syndrome still have not been clarified. Contact stress measurement in vivo during shoulder motion is essential to identifying the biomechanics of the syndrome. There have been no reports to date regarding internal impingement syndrome among the syndrome studied by using the finite element method (FEM). The proposed method simulates the internal impingement syndrome according to shoulder motion using the FEM. The method solves the critical process zone error at the supraspinatus tendon insertion according to impingement of the 3D biomechanical model by relaxing the boundary condition for representation of shoulder motion. The simulation results confirmed that the proposed method allowed for the analysis of internal impingement syndrome by measuring contact stress (23.13 MPa) during shoulder motion. The performance of the proposed method was examined through the differential displacement (maximum 3.28 mm) in shoulder motion by boundary condition relaxation. The result of the simulation was consistent with the clinical findings. [ABSTRACT FROM AUTHOR]

Arthroscopic Bankart repair of anterior instability has shown relatively good results, but its effectiveness is unclear in cases wherein there is a bone defect in the glenoid bone. The surgical management of recurrent anterior shoulder instability with severe glenoid bone loss has been challenging until now. Therefore the Latarjet procedure was introduced as an alternative that provided good results in cases of full instability with a bone defect. In cases of recurrent anterior shoulder instability, bone defects are often present within the glenoid. To restore glenohumeral stability, a bone augmentation procedure is required, and the Latarjet procedure to use bony transfer from the coracoid is the most popular technique. However, resorption of the bone graft with metal screw protrusion is a serious concern, whereas the relative contribution of the dynamic sling effect of the Latarjet procedure remains controversial. The Latarjet procedure also destroys the normal kinematics, resulting in side effects such as scapular dyskinesia. Here we introduce an arthroscopic anterior bone block procedure for reconstructing anterior glenoid bone defects using an autologous iliac crest graft. This technique enables precise bone block placement and fixation using one all-suture anchor instead of screw fixation. [ABSTRACT FROM AUTHOR]

Acromioclavicular (AC) joint dislocation is a common injury, particularly among active young individuals. Numerous surgical procedures for treating acute, high-grade AC joint dislocation have been reported. However, no standard surgical procedure that restores the normal kinematics of the AC joint is available. Among the available coracoclavicular (CC) fixation techniques, cortical button fixation was recently introduced, and it has had successful outcomes. Moreover, it is advantageous because it can be used in arthroscopic procedures. However, because of the limited number of fixation tools, a fundamental problem in terms of horizontal instability and gradual subsidence of cortical buttons has been observed, eventually leading to a threat to vertical stability. Therefore, we developed a unique CC fixation technique with multiple small tunnels using all-suture anchors, which may overcome potential complications caused by cortical buttons that require bone tunnels with relatively large diameters. This arthroscopic CC fixation technique was designed to achieve the ideal horizontal and vertical stability that may restore native AC kinematics. [ABSTRACT FROM AUTHOR]

Background. Among coracoclavicular (CC) fixation techniques, the use of flip button device was demonstrated to have successful outcomes with the advantage of being able to accommodate an arthroscopic procedure. Purpose. This study was conducted to investigate the factors associated with loss of fixation after arthroscopically assisted CC fixation using a single flip button device for acromioclavicular (AC) joint dislocations. Materials and Methods. We enrolled a total of 47 patients (35 men and 12 women). Plain radiography was performed at a mean of 24 months postoperatively to evaluate the final radiological outcome. The primary outcome measure was a long-term reduction of the AC joint for at least 24 months. Results. We found that 29 patients had a high quality reduction (61.7%) and 18 patients had a low quality reduction (38.3%) in initial postoperative CT findings. Our study showed that the duration (5 days) from injury to treatment and the quality of initial postoperative reduction were significantly associated with the maintenance of reduction at final follow-up. Conclusion. Our study showed that maintaining stable reduction after arthroscopically assisted CC fixation using a single flip button device technique is difficult especially in patients who received delayed treatment or whose initial reduction quality was poor. [ABSTRACT FROM AUTHOR]

A patient who underwent manipulation for stiffness accompanying a rotator cuff tear experienced a complication consisting of a bony Bankart lesion connected to the superior and inferior labrum. This lesion was displaced posteriorly, locked behind the humeral head and blocking the reduction. Attachment of the labrum to this fragment made reduction and fixation easier. This bony Bankart lesion was fixed successfully by arthroscopic placement of knotless suture anchors. Level of evidence Case report, Level IV. [ABSTRACT FROM AUTHOR]

Purpose: To quantitatively and qualitatively evaluate the impingement behavior between structures within the glenohumeral joint under simulated abduction-external rotation (ABER) motion using finite element analysis.Methods: Computed tomography (CT) scanning of 1 shoulder in a volunteer was performed at 0° and 120° of shoulder abduction with external rotation (ABER position), followed by magnetic resonance imaging at 0° of abduction. The CT and magnetic resonance images were then imported into a customized software program to undergo 3-dimensional reconstruction followed by finite element modeling of the bone and soft tissue including the upper part of the rotator cuff and glenohumeral labral complex. Glenohumeral motion from 0° to the ABER position was simulated by CT images in 2 different humeral positions. On the basis of simulated humeral motion with respect to the scapula, we measured the stress value on the biceps-labral complex and upper part of the rotator cuff as a consequence of their structural deformation. In addition, we intended to design 2 types of labra--a normal stable labrum and an unstable posterosuperior labrum--to evaluate the geometric alteration and resulting stress change on the posterosuperior labrum against a compressive force from the humeral head and rotator cuff.Results: In the ABER position, the posterosuperior labrum was deformed by the humeral head and interposed posterior part of the rotator cuff. When viewed from the rotator cuff, the posterior part of the rotator cuff came into contact with the posterosuperior labrum as external rotation increased. The measured peak contact stress values were 19.7 MPa and 23.5 MPa for the posterosuperior labrum and the upper rotator cuff, respectively. The stress values for both structures decreased to 5.8 MPa and 18.1 MPa, respectively, in the simulated SLAP model. The root of the long head of the biceps became compressed halfway through the range of motion by the humeral head, especially from the part involving horizontal extension and external rotation, resulting in a high stress of 22.4 MPa.Conclusions: In this simulated SLAP model, the posterosuperior labrum was medially displaced by the humeral head and upper rotator cuff in the ABER position, causing a functional loss of the spacer effect.Clinical Relevance: In SLAP lesions, the posterosuperior labrum loses its ability to function as a spacer in certain positions (especially ABER) and may decrease the important spacer effect between the humerus and the rotator cuff; this may lead to posterosuperior subluxation of the humeral head or rotator cuff abnormalities and tears during repetitive ABER tasks. [ABSTRACT FROM AUTHOR]

Purpose: To investigate changes in femoral tunnel diameter, dimension, and volume after anterior cruciate ligament reconstruction with notchplasty. Methods: Porcine knee specimens were divided into 2 groups of 10 specimens each. Group A did not receive notchplasty. A 2-mm notchplasty was conducted in group B. Seven-millimeter-diameter femoral tunnels were drilled and a doubled flexor digitorum profundus tendon was inserted and fixed with an EndoButton (Smith & Nephew, Andover, MA) in each knee specimen. Samples were mounted on a materials testing machine. Each group was preloaded at 10 N and subjected to 20 loading cycles (between 0 and 40 N), followed by 1,000 loading cycles in the elastic region (between 10 and 150 N). High-resolution computed tomography with 1.0-mm slices was conducted with all samples before and after testing. A 3-dimensional model was constructed to evaluate the degree of the tunnel change. Results: In group B the mean longest diameter and dimension of the femoral tunnel significantly increased after the test (P = .005 and P = .001, respectively). The volumetric loss of bony structure after the test in group B was significantly greater than that in group A (P = .039). Meanwhile, no significant difference was found before and after the test in terms of tunnel diameter, dimension, and volumetric loss around the tunnel in group A. Conclusions: The intra-articular orifice of the femoral tunnel was enlarged after the uniaxial cyclic loading test after notchplasty. An enlarged tunnel orifice may lead to a discrepancy between the tunnel and the graft at the tunnel aperture. Clinical Relevance: The data may have an implication that suspensory fixation with a notchplasty has a negative effect on the full graft accommodation at the tunnel aperture. Aperture widening may affect graft positioning, leading to subtle changes in graft biomechanics and laxity. [Copyright &y& Elsevier]

Abstract: The goal of this article is to consolidate the International Society of Arthroscopy, Knee Surgery & Orthopaedic Sports Medicine (ISAKOS) Upper Extremity Committee's (UEC's) current knowledge on rotator cuff disease and management, as well as highlight key unresolved issues. The rotator cuff is an anatomically complex structure important for providing glenohumeral function and stability as part of a closed chain system. Current consensus suggests rotator cuff injuries are most accurately diagnosed, at levels similar to diagnosis by magnetic resonance imaging, with a combination of cuff- and impingement-specific clinical tests. Updates in the understanding of acromion morphology, the insertional anatomy of the rotator cuff, and the role of suprascapular nerve release may require changes to current classification systems and surgical strategies. Although initial management focuses on nonoperative protocols, discussion continues on whether surgery for isolated impingement is clinically more beneficial than rehabilitation. However, clear indications have yet to be established for the use of single- versus double-row repair because evidence confirms neither is clinically efficacious than the other. Biceps tenodesis, however, in non-isolated cuff tears has proven more successful in addressing the etiology of shoulder pain and yields improved outcomes over tenotomy. Data reviewing the benefits of tendon transfers, shoulder prostheses, and mechanical scaffolds, as well as new research on the potential benefit of platelet-rich plasma, pluripotential stem cells, and gene therapies, will also be presented. [Copyright &y& Elsevier]

Purpose: The aim of this study was to determine the acromioclavicular (AC) motion and change in length and tension of the coracoclavicular ligament during different positions of shoulder abduction using a 3-dimensional finite element model based on computed tomography images from normal human shoulders. Methods: The right shoulders of 10 living subjects were scanned with a high-resolution computed tomography scanner at 0°, 60°, 120°, and 180° of shoulder abduction. Several modeling programs were used to simulate AC motion. Finite element models of the conoid and trapezoid ligaments were constructed based on each footprint. The tension and length changes of each ligament during shoulder abduction were assessed. Results: The distal clavicle exhibited internal rotation with respect to the medial acromion at 0°, 60°, 120°, and full abduction (3.2° ± 2.9°, 23.2° ± 10.8°, 20.6° ± 3.7°, and 37.1° ± 3.4°, respectively). With horizontal motion, the clavicle translated posteriorly at 60° of abduction (4.4 ± 3.4 mm) and then translated anteriorly at 120° and full abduction (0.4 ± 1.6 mm and 1.9 ± 0.4 mm, respectively). The lengths of the conoid ligament gradually increased at 60° to 180° of shoulder abduction whereas those of the trapezoid ligament remained relatively consistent at 60° to 120° of abduction compared with 0° of abduction. Conclusions: The distal clavicle had a wide range of motion during shoulder abduction, which did not support the concept of synchronous motion with the scapula. The conoid and trapezoid ligaments functioned reciprocally during shoulder abduction. With increasing shoulder abduction, the length of the conoid ligament gradually increased; meanwhile, the trapezoid ligament was relatively consistent and then lax at full abduction. In particular, the conoid ligament may act as a key restraint to prevent excessive retraction of the scapula during shoulder abduction. Clinical Relevance: The data in this study have the potential to suggest that conoid and trapezoid ligaments should be reconstructed separately, and rigid AC fixation in patients with AC separation is not recommended based on the findings of this study. [Copyright &y& Elsevier]

Purpose: The aim of this study was to determine the change in length and tension of the reconstructed anterior cruciate ligament (ACL) double bundles at different knee flexion angles by use of a 3-dimensional finite element model. Methods: The right knees of 12 living subjects were scanned with a high-resolution computed tomography scanner at 0°, 45°, 90°, and 135° of knee flexion. Several modeling programs were used to simulate double-bundle ACL reconstruction. A finite element model of each bundle with a tension of 20 N was put into each tunnel followed by fixation of the bundles. The tension and length changes of each bundle at different knee flexion angles were assessed. Results: For the anteromedial bundle, the length decreased gradually between 45° and 90° of knee flexion and then reached a plateau, whereas the length of the posterolateral bundle significantly decreased at 45° and 90° of flexion but then increased at full flexion. The reaction force of the anteromedial graft slightly decreased at 45° and then remained constant between 90° and 135° of knee flexion. The reaction force of the posterolateral bundle at full extension slightly decreased at 45° and 90° of flexion, followed by a rebound increase at 135°. Conclusions: We found that both bundles functioned throughout the arc of flexion with consistency in tension, although their lengths decreased. The 2 ACL grafts did not function in a reciprocal manner, unlike previous descriptions. Clinical Relevance: The data obtained for length and tension versus flexion angle have the potential to suggest the appropriate knee position for graft fixation and tensioning to be near extension in clinical situations. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to review the isometric point of the posterior cruciate ligament (PCL) based on insertional locations identified in recent anatomic studies by use of a 3-dimensional knee model. Methods: Ten living subjects with healthy knees were evaluated. High-resolution computed tomography scans were performed at 3 positions of 0°, 90°, and 135°, and 3-dimensional knee images were constructed. Customized software was used to define tibial and femoral insertion points of the PCL, based on recently described anatomy. The femoral attachment site of the PCL was divided into 4 sectors (labeled A through D), and the tibial attachment site was divided into 6 sectors (labeled 1 through 6). Twenty-four virtual PCL bundles were created between these sectors, and their length was measured in the 3 knee flexion positions. Results: In 0° and 90° of knee flexion, the virtual bundle showing the least amount of length change (1.10 ± 0.66 mm) was at sector D-6, that is, a posteromedial bundle inserting into the most posterior femoral sector (sector D) and the most distal tibial sector (sector 6). This change was not significantly different compared with all other virtual bundles with tibial points connected to femoral sector D (P > .05). An isometric position for the PCL (length change <2 mm) could not be found in 135° of knee flexion because of lengthening of all virtual bundles. Conclusions: Our data suggest that the femoral attachment point is more important than the tibial attachment point: any of the 6 tibial bundles attached to the most posterior femoral sector had similar isometric properties. Clinical Relevance: Reproducing normal tibial and femoral anatomy underpins PCL surgical reconstruction. These findings suggest that to perform an isometrically accurate PCL reconstruction, particular attention should be paid to the location of the femoral attachment site, once the tibial footprint has been established. There were no isometric points in any virtual PCL bundle in the fully flexed knee because of excessive lengthening. Therefore, to avoid lengthening of the reconstructed graft, we recommend that fixation is performed at knee flexion angles between 0° and 90° and that patients avoid high flexion during postoperative rehabilitation. [ABSTRACT FROM AUTHOR]

Spinoglenoid cyst (SGC) is a ganglion arising in the spinoglenoid notch and is thought to be related to SLAP lesion. This cyst often compresses the suprascapular nerve in the spinoglenoid notch. Symptomatic cysts require surgical treatment when conservative treatment fails. In particular, arthroscopic decompression through the torn labral tissue when the cyst is extending into the joint cavity is easy and convenient. However, if the cyst is confined to the spinoglenoid notch, arthroscopic approach through the torn labral tissue is challenging. Thus, we present our preferred technique of addressing the SGC through an additional superior capsular window after completing SLAP repair. We believe that our technique is easy, reproducible, and reasonable. [ABSTRACT FROM AUTHOR]

Abstract: The long head of the biceps brachii tendon arises mainly from the superior glenoid labrum and supraglenoid tubercle. Biceps brachii display anatomic variations, but these are rarely encountered. We report, for the first time, a technique called arthroscopic intra-articular biceps tenoplasty describing restoration of the long head of the biceps tendon using the superior capsule in a case of anomalous congenital split biceps tendon encountered incidentally during diagnostic glenohumeral arthroscopy in a patient who was treated for shoulder instability and SLAP tear. [Copyright &y& Elsevier]

Background: This study aimed to investigate impingement-free range of motion (ROM) of the glenohumeral joint following reverse total shoulder arthroplasty (RTSA) with three types of implant models using computational motion analysis.Methods: Three-dimensional (3D) scapulohumeral models were created from preoperative computed tomography (CT) images of seven patients by using visualization and computer-aided design software. Three types of implant designs, namely, typical medialization, in between, and lateralization implants, were used for the reconstruction of 3D model; each design was designated as group I, II, and III, respectively. All possible combinations of virtual surgeries were evaluated for impingement-free ROM in all three groups. Maximal ROMs were compared. The effect of implant positions on ROM of the shoulder joints were investigated in each group.Results: The all lateralization group (group III) showed significantly greatest maximal adduction, abduction and external rotation (ER). Adduction and abduction were significantly increased by the glenoid component inferior translation in all three groups. (In group I, p < 0.001 for adduction, p = 0.002 for abduction, respectively; in group II, p = 0.025, p < 0.001, respectively; in group III, p = 0.038, p = 0.011, respectively). Increasing humerus retroversion might have some effect on increasing abduction. In group II and III, internal rotation (IR) and ER were significantly affected by the humerus retroversion (in group II, p = 0.033 for IR, p = 0.007 for ER, respectively; in group III, p = 0.004, p < 0.001, respectively). In group III, ER was also significantly affected by the glenoid component inferior translation (p = 0.003).Conclusions: Lateralization design model showed greatest ROM of the shoulder joint. The effects of implant positions on impingement-free ROM exhibited different tendencies between medialization and lateralization implant models. Humerus retroversion affected both IR and ER, especially in lateralization design. Increasing glenoid inferior translation increases both adduction and abduction regardless of implant designs. [ABSTRACT FROM AUTHOR]