Search

DNA-templated silver nanoclusters (AgNCs) are an emerging class of ultrasmall (

Graphene materials have attracted special attention because of their electrical conductivity, mechanical properties, and favorable biocompatibility. Although various methods have been developed for fabricating micro/nano conductive fibrous scaffolds, it is still challenging to fabricate the three-dimensional (3D) graphene fibrous scaffolds. Herein, we developed a new method, termed as microfluidic 3D printing technology (M3DP), to fabricate 3D graphene oxide (GO) microfibrous scaffolds with an adjustable fiber length, fiber diameter, and scaffold structure by integrating the microfluidic spinning technology with a programmable 3D printing system. GO microfibrous scaffolds were then transformed into conductive reduced graphene oxide (rGO) microfibrous scaffolds by hydrothermal reduction. Our results demonstrated that the fabricated 3D fibrous graphene scaffolds exhibited tunable structures, maneuverable mechanical properties, and good electrical conductivity and biocompatibility, as reflected by the adhesion and proliferation of SH-SY5Y cells on the graphene microfibrous scaffolds in an obviously oriented manner. The developed M3DP would be a powerful tool for fabricating 3D graphene microfibrous scaffolds for electroactive tissue regeneration and drug-screening applications.

The shortened Abstract is as follows: Therapeutic gas nitric oxide (NO) has demonstrated the unique advances in biomedical applications due to its prominent role in regulating physiological/pathophysiological activities in terms of vasodilation, angiogenesis, chemosensitizing effect, and bactericidal effect. However, it is challenging to deliver NO, due to its short half-life (

Engineered tissue constructs rely on biomaterials as support structures for tissue repair and regeneration. Among these biomaterials, polyester biomaterials have been widely used for scaffold construction because of their merits such as ease in synthesis, degradable properties, and elastomeric characteristics. To mimic the aligned structures of native extracellular matrix (ECM) in tissues such as nerve, heart and tendon, various polyester materials have been fabricated into aligned fibrous scaffolds with fibers ranging from several nanometers to several micrometers in diameter by electrospinning in a simple and reproducible manner. These aligned fibrous scaffolds, especially the three-dimensional (3D) aligned nanofibrous scaffolds have emerged as a promising solution for tissue regeneration. Compared with two-dimensional (2D) scaffolds, the 3D aligned nanofibrous scaffolds provide another dimension for cell behaviors such as morphogenesis, migration and cell-cell interactions, which is important in regulating the stem cell fate and tissue regeneration. In this review, we provide an extensive overview on recent efforts for constructing 3D aligned polyester nanofibrous scaffolds by electrospinning, then the results of cell-specific functions dependent on such physical and chemical cues, and discuss their potentials in improving or restoring damaged tissues.

The poor osseointegration of Ti implant significantly compromise its application in load-bearing bone repair and replacement. Electrically bioactive coating inspirited from heterojunction on Ti implant can benefit osseointegration but cannot avoid the stress shielding effect between bone and implant. To resolve this conflict, hierarchically structured Ti implant with electrically bioactive SnO2-TiO2 bilayered surface has been developed to enhance osseointegration. Benefiting from the electric cue offered by the built-in electrical field of SnO2-TiO2 heterojunction and the topographic cue provided by the hierarchical surface structure to bone regeneration, the osteoblastic function of basic multicellular units around the implant is significantly improved. Because the individual TiO2 or SnO2 coating with uniform surface exhibits no electrical bioactivity, the effects of electric and topographic cues to osseointegration have been decoupled via the analysis of in vivo performance for the placed Ti implant with different surfaces. The developed Ti implant shows significantly improved osseointegration with excellent bone-implant contact, improved mineralization of extracellular matrix, and increased push-out force. These results suggest that the synergistic strategy of combing electrical bioactivity with hierarchical surface structure provides a new platform for developing advanced endosseous implants.

In vivo, cells are located in a dynamic, three-dimensional (3D) cell microenvironment, and various biomaterials have been used to engineer 3D cell microenvironments in vitro to study the effects of the cell microenvironment on the regulation of cell fate. However, conventional hydrogels can only mimic the static cell microenvironment without any synchronous regulations. Therefore, novel hydrogels that are capable of responding to specific stimuli (e.g., light, temperature, pH, and magnetic and electrical stimulations) have emerged as versatile platforms to precisely mimic the dynamic native 3D cell microenvironment. Among these novel hydrogels, photoresponsive hydrogels (PRHs) that are capable of changing their physical and chemical properties after exposure to light irradiation enable the dynamic, native cell microenvironment to be mimicked and show great promise in deciphering the unknown mechanisms of the 3D cell microenvironment in regulating the cell fate. Several reviews have already summarized the advances of PRHs and have focused on specific photosensitive chemical groups and photoresponsive elements or on the reaction categories and mechanism of PRHs. However, a holistic view of novel PRHs, which highlights the multiple physical and chemical properties that can be tuned by remote light activation, as well as their applications in engineering a dynamic cell microenvironment for the regulation of cell behaviors in vitro is still missing and is the focus of this review.

Triple-negative breast cancer (TNBC) does not respond to many targeted drugs due to the lack of three receptors (i.e., estrogen receptor, progesterone receptor, and human epidermal growth factor receptor-2), which makes it difficult for TNBC detection and treatment. As compared to traditional breast cancer treatments such as surgery and chemotherapy, photodynamic therapy (PDT) has emerged as a promising approach for treating TNBC due to its precise controllability, high spatiotemporal accuracy, and minimal invasive nature. However, traditional photosensitizers used in PDT are associated with limitations of aggregation-caused quenching (ACQ), and the ACQ induced a significant decrease in reactive oxygen species (ROS) generation. To address these, we synthesized a cyclic arginine-glycine-aspartic acid (cRGD) peptide-decorated conjugated polymer (CP) nanoparticles with poly[2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylenevinylene] (MEH-PPV) as the photosensitizer for the theranostics of TNBC. The synthesized CP nanoparticles show bright fluorescence with high stability and could effectively produce ROS under light irradiation. Cell viability studies showed that the CP nanoparticles have negligible dark cytotoxicity and could efficiently kill the α

Fluorescence imaging is superior in sensitivity and resolution compared with other imaging modalities; however, its application is hindered by high background noise. Tissue-selective strategies, such as passive, active, and activatable targeting, hold great promise in accelerating clinical translation by significantly improving the tumor:background ratio (TBR) and, in turn, the sensitivity and contrast of fluorescence imaging. Compared with the 'always on' contrast agents, activatable probes, which remain nonfluorescent until being activated by tumor-specific molecular targets, further enhance TBR and at the same time provide additional molecular information that can be related to tumor staging and therapy response. In this review, we summarize recent advances in the development of activatable fluorescence probes and provide insights into their advantages and limitations when used for tumor imaging.

Tracking the distribution and degradation of hydrogels in vivo is important for various applications including tissue engineering and drug delivery. Among various imaging modalities, fluorescence imaging has attracted intensive attention due to their high sensitivity, low cost and easy operation. Particularly, upconversion nanoparticles (UCNPs) that emit visible lights upon near-infrared (NIR) light excitation as tracking probes are promising in deciphering the fate of hydrogels after transplantation. Herein, we reported a facile and non-invasive in vivo hydrogel tracking method using UCNPs, where the degradation of hydrogels was determined using the decrease in fluorescence intensity from the UCNPs encapsulated in the hydrogels. We found that the change in the fluorescence intensity from the UCNPs was well consistent with that of the fluorescein isothiocyanate (FITC) covalently conjugated to hydrogels and also with the weight change of the hydrogels, suggesting the accuracy of the UCNPs in tracking the degradation of hydrogels. Furthermore, the in vivo fluorescence signals were only observed from the UCNPs instead of FITC after implantation for 7 days due to the deep tissue penetration of UCNPs, demonstrating the capability of UCNPs in longitudinal, consecutive and non-invasive monitoring the in vivo degradation of hydrogels without causing any damage to the major organs (heart, lung, liver and kidney) of model rats. This study thus paves the way for monitoring the in vivo behaviors of biomimetic materials via deep tissue imaging with great clinical translation potentials. Statement of Significance Long-term noninvasive in vivo tracking of the distribution and degradation of biodegradable hydrogels using fluorescent probes is important in tissue regeneration and drug delivery. Unlike the widely used fluorescent dyes and quantum dots (QDs) that suffer from photobleaching and undesired toxicity, upconversion nanoparticles (UCNPs) with high stability, deep tissue penetration as tracking probes are promising in deciphering the fate of hydrogels after transplantation. Herein, we reported a noninvasive in vivo hydrogel tracking method using UCNPs and found that the fluorescence intensity change from the UCNPs was well consistent with the weight change of the hydrogels, suggesting the accuracy of UCNPs in tracking hydrogel degradation. This study provides inspirations on developing advanced NIR light regulated probes with great clinical translation potentials.

A modified energy transfer model by incorporating self-quenching effect is introduced to determine upconversion emission of β-NaYF 4 :Yb,Er. The simulation results agree well with existing experimental results, demonstrating the critical role of self-quenching effect in upconversion emission. Our results confirm that a 4.4-fold increase of green upconversion and 86-fold increase in the intensity of red upconversion emission could be realized by suppressing self-quenching. In addition, the optimal doping concentrations for integral emission intensity are found to be independent of excitation power, while the green to red ratio is found to rely significantly on excitation power. Our model offers mechanistic insight into upconversion emission processes and provides inspirations in improving upconversion emission efficiency through optimization of energy transfer pathways in different types of matrix sub-lattice.

3D bioprinting has been developed to effectively and rapidly pattern living cells and biomaterials, aiming to create complex bioconstructs. However, placing biocompatible materials or cells into direct contact via bioprinting is necessary but insufficient for creating these constructs. Therefore, '4D bioprinting' has emerged recently, where 'time' is integrated with 3D bioprinting as the fourth dimension, and the printed objects can change their shapes or functionalities when an external stimulus is imposed or when cell fusion or postprinting self-assembly occurs. In this review, we highlight recent developments in 4D bioprinting technology. Additionally, we review the uses of 4D bioprinting in tissue engineering and drug delivery. Finally, we discuss the major roadblocks to this approach, together with possible solutions, to provide future perspectives on this technology.

Mesenchymal stem cells (MSCs) hold great promise as cell therapy candidate in clinics. However, the underlying mechanisms remain elusive due to the lack of effective cell tracking approaches during therapeutic processes. In this study, we successfully synthesized and utilized NaYF 4 :Yb 3+ ,Er 3+ upconversion nanoparticles (UCNPs) to label and track rabbit bone marrow mesenchymal stem cells (rBMSCs) during the osteogenic differentiation in vitro . To improve their biocompatibility and cellular uptake, we modified the UCNPs with negatively-charged poly(acrylic acid) and positively-charged poly(allylamine hydrochloride) in turns ( i.e. , PAH-PAA-UCNPs). The effect of cellular uptake of UCNPs on the osteogenic differentiation of rBMSCs was systematically evaluated, and no significant difference was found between rBMSCs labeled with UCNPs (concentration range of 0–50 μg/mL) and UCNPs-free rBMSCs in terms of cell viability, ALP activity, osteogenic protein expressions and production of mineralized nodules. Moreover, the PAH-PAA-UCNPs at a concentration of 50 μg/mL exhibited the highest biocompatibility and stability, which could well track rBMSCs during the osteogenesis process. These results would provide a positive reference for the application of these lanthanide-doped UCNPs as fluorescent nanoprobes for stem cell tracking to further understand the mechanism of stem cell fate in tissue engineering and stem cell therapy. Statement of Significance Upconversion nanoparticles (UCNPs) have attracted increasing attention as alternative probes for tracking various types of cells including stem cells. The reported fluorapatite-based UCNPs with the needle-like morphology showed a little poor performance on stem cell tracking, which was possibly attributed to the low upconversion efficiency and cell labeling efficiency potentially due to nanomaterial composition, crystal structure and shape. Here, we synthesized the positively-charged NaYF 4 :Yb 3+ ,Er 3+ UCNPs with hexagonal phase and sphere-like morphology to enhance their upconversion efficiency, biocompatibility and cellular uptake, leading to a successful tracking of rBMSCs in osteogenesis process without impairing cell viability and differentiation capacity. This study provided a necessary reference for the application of UCNPs in stem cell tracking to better understand the mechanism of stem cell fate in tissue engineering, stem cell therapy, etc .

In article number 2001820, Feng Xu and co‐workers report a multifunctional hydrogel‐based liquid bandage (LBA) for trauma emergency; the resulting photo‐responsive chitosan‐based hydrogel harvests robust adhesive, hemostatic, and antibacterial performances as a first‐aid tissue adhesive. LBA is simply prepared without any extraneous photo‐initiator and toxic crosslinking agent for its safe use. Moreover, the utilization of this LBA can boost wound healing.

Photodynamic therapy (PDT) has been widely applied in the clinic for the treatment of various types of cancer due to its precise controllability, minimally invasive approach and high spatiotemporal accuracy as compared with conventional chemotherapy. However, the porphyrin-based photosensitizers (PSs) used in clinics generally suffer from aggregation-caused reductions in the generation of reactive oxygen species (ROS) and limited tissue penetration because of visible light activation, which greatly hampers their applications for the treatment of deep-seated tumors. Methods: We present a facile strategy for constructing a NIR-regulated cancer theranostic nanoplatform by encapsulating upconversion nanoparticles (UCNPs) and a luminogen (2-(2,6-bis((E)-4-(phenyl(40-(1,2,2-triphenylvinyl)-[1,10-biphenyl]-4-yl)amino)styryl)-4H-pyran-4-ylidene)malononitrile, TTD) with aggregation-induced emission (AIEgen) characteristics using an amphiphilic polymer, and further conjugating cyclic arginine-glycine-aspartic acid (cRGD) peptide to yield UCNP@TTD-cRGD NPs. We then evaluated the bioimaging and anti-tumor capability of the UCNP@TTD-cRGD NPs under NIR light illumination in an in vitro three-dimensional (3D) cancer spheroid and in a murine tumor model, respectively. Results: With a close match between the UCNP emission and absorption of the AIEgen, the synthesized NPs could efficiently generate ROS, even under excitation through thick tissues. The NIR-regulated UCNP@TTD-cRGD NPs that were developed could selectively light up the targeted cancer cells and significantly inhibit tumor growth during the NIR-regulated PDT treatment as compared with the cells under white light excitation. Conclusion: In summary, the synthesized UCNP@TTD-cRGD NPs showed great potential in NIR light-regulated photodynamic therapy of deep-seated tumors. Our study will inspire further exploration of novel theranostic nanoplatforms that combine UCNPs and various AIEgen PSs for the advancement of deep-seated tumor treatments with potential clinical translations.

Stem cell therapy is promising for treating traumatic injuries of the central nervous system, where a major challenge is to effectively differentiate neural stem cells into neurons with uniaxial alignment. Recently, controlling stem cell fate by modulating biophysical cues (e.g., stiffness, conductivity, and patterns) has emerged as an attractive approach. Herein, we report a new heterostructure composite scaffold to induce cell-oriented growth and enhance the neuronal differentiation of SH-SY5Y cells. The scaffold is composed of aligned electrospinning silk nanofibers coated on reduced graphene paper with high conductivity and good biocompatibility. Our experimental results demonstrate that the composite scaffold can effectively induce the oriented growth and enhance neuronal differentiation of SH-SY5Y cells. Our study develops a novel scaffold for enhancing the differentiation of SH-SY5Y cells into neurons, which holds great potential in the treatment of neurological diseases and injuries.

Medicine counterfeiting is a serious issue worldwide, involving potentially devastating health repercussions. Advanced anti-counterfeit technology for drugs has therefore aroused intensive interest. However, existing anti-counterfeit technologies are associated with drawbacks such as the high cost, complex fabrication process, sophisticated operation and incapability in authenticating drug ingredients. In this contribution, we developed a smart phone recognition based upconversion fluorescent three-dimensional (3D) quick response (QR) code for tracking and anti-counterfeiting of drugs. We firstly formulated three colored inks incorporating upconversion nanoparticles with RGB (i.e., red, green and blue) emission colors. Using a modified inkjet printer, we printed a series of colors by precisely regulating the overlap of these three inks. Meanwhile, we developed a multilayer printing and splitting technology, which significantly increases the information storage capacity per unit area. As an example, we directly printed the upconversion fluorescent 3D QR code on the surface of drug capsules. The 3D QR code consisted of three different color layers with each layer encoded by information of different aspects of the drug. A smart phone APP was designed to decode the multicolor 3D QR code, providing the authenticity and related information of drugs. The developed technology possesses merits in terms of low cost, ease of operation, high throughput and high information capacity, thus holds great potential for drug anti-counterfeiting.

The potential for the use of electric stimulation to control cell behavior on a surface has been well documented. In terms of orthopaedic applications, there is a need to develop bioactive surfaces with a built-in electric field for clinically relevant materials, such as load-bearing titanium (Ti). In this work, a bi-layered SnO2-TiO2 coating is fabricated via microarc oxidation and subsequent hydrothermal treatment to adjust the surface electrical properties for improving bioactivity. An oxidized titanium interlayer on Ti substrate allows the growth of SnO2 nanorods with different morphologies, which leads to a built-in n-n heterojunction of SnO2 and TiO2 on the Ti surface with varied surface electrical properties. The crystallization of the TiO2 interlayer facilitates the growth of SnO2 nanorods, showing excellent hydrophilicity and good apatite-inducing ability due to the formation of a heterojunction. The results suggest that the bi-layered SnO2-TiO2 coating with electrically stimulated bioactivity could provide a novel way to enhance osteointegration on the Ti surface.

Tissue regeneration, energy conversion & storage, and water treatment are some of the most critical challenges facing humanity in the 21st century. In order to address such challenges, one-dimensional (1D) materials are projected to play a key role in developing emerging solutions for the increasingly complex problems. Eletrospinning technology has been demonstrated to be a simple, versatile, and cost-effective method in fabricating a rich variety of materials with 1D nanostructures. These include polymers, composites, and inorganic materials with unique chemical and physical properties. In this tutorial review, we first give a brief introduction to electrospun materials with a special emphasis on the design, fabrication, and modification of 1D functional materials. Adopting the perspective of chemists and materials scientists, we then focus on the recent significant progress made in the domains of tissue regeneration (e.g., skin, nerve, heart and bone) and conversion & storage of clean energy (e.g., solar cells, fuel cells, batteries, and supercapacitors), where nanofibres have been used as active nanomaterials. Furthermore, this review's scope also includes the advances in the use of electrospun materials for the removal of heavy metal ions, organic pollutants, gas and bacteria in water treatment applications. Finally a conclusion and perspective is provided, in which we discuss the remaining challenges for 1D electrospun nanomaterials in tissue regeneration, energy conversion & storage, and water treatment.

A highly tunable nanoparticle (NP) system with multifunctionalities was developed as drug nanocarrier via a facile layer-by-layer (LbL) stereocomplex (SC) self-assembly of enantiomeric poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) in solution using silica-coated magnetite (Fe3O4@SiO2) as template. The poly(lactide) (PLA) SC coated NPs (Fe3O4@SiO2@-SC) were further endowed with different stimuli-responsiveness by controlling the outermost layer coatings with respective pH-sensitive poly(lactic acid)-poly(2-dimethylaminoethyl methacrylate) (PLA-D) and temperature-sensitive poly(lactic acid)-poly(N-isopropylacrylamide) (PLA-N) diblock copolymers to yield Fe3O4@SiO2@SC-D and Fe3O4@SiO2@SC-N NPs, respectively, while the superparamagnetic properties of Fe3O4 were maintained. TEM images show a clearly resolved core-shell structure with a silica layer and sequential PLA SC co/polymer coating layers in the respective NPs. The well-designed NPs possess a size distribution in a range of 220-270 nm and high magnetization of 70.8-72.1 emu/g [Fe3O4]. More importantly, a drug release study from the as-constructed stimuli-responsive NPs exhibited sustained release profiles and the rates of release can be tuned by variation of external environments. Further cytotoxicity and cell culture studies revealed that PLA SC coated NPs possessed good cell biocompatibility and the doxorubicin (DOX)-loaded NPs showed enhanced drug delivery efficiency toward MCF-7 cancer cells. Together with the strong magnetic sensitivity, the developed hybrid NPs demonstrate a great potential of control over the drug release at a targeted site. The developed coating method can be further optimized to finely tune the nanocarrier size and operating range of pHs and temperatures for in vivo applications.

Fluorescent composite hydrogels have found widespread applications, especially in spatial and temporal monitoring of in vivo hydrogel behaviors via the emitting optical signal. However, most existing fluorescent composite hydrogels suffer from limited capability of deep tissue imaging and complicated fabrication routes. We herein report a facile method for fabricating fluorescent composite hydrogels based on the in situ synthesis of NaYF4:Yb, Er upconversion nanoparticles (UCNPs). This approach employs polyacrylamide (PAAm) hydrogels as a template, where the interconnected pores within the hydrogel act as nanoreactors to confine the growth of nanocrystals. We then obtained a fluorescent composite hydrogel exhibiting upconversion fluorescence and enhanced mechanical properties. The fluorescence spectra show that the fluorescence intensity decreases with decreasing size of the UCNPs. We investigated the relationship between the optical properties of the fluorescent composite hydrogel and the incorporated UCNPs based on the morphology, size, and distribution of the UCNPs by using scanning electron microscopy and transmission electron microscopy. In addition, we demonstrated the applicability of the synthesized hydrogel for deep tissue imaging through an in vitro tissue penetration experiment. Compressive and dynamic rheological testing reveal enhanced mechanical properties with increasing UCNP concentration. The fabricated upconversion fluorescent composite hydrogel may pave the way for monitoring the in vivo behavior of biomimetic materials via deep tissue imaging.