Search

The response surface methodology was used for the optimization of different submerged fermentation conditions for the production of recombinant laccase Lcc1 in Pichia pastoris KM71H. The initial screening of production parameters was performed using a Plackett–Burman design, and the variables with significant effects on laccase production were identified as follows: medium initial pH, methanol additive amount and liquid volume. These variables were selected for further optimization studies using a Box-Behnken design. The results indicated that the optimum fermentation conditions were as follows: medium optimal initial pH value of 7.01, methanol additive amount of 0.63% (v/v) per 24 h and liquid volume of 19.50% (v/v). These conditions provided the highest laccase enzyme activity of 12,491 U/L, resulting in a 3-fold increase in the production of recombinant laccase. Using industrial basic salt as culture medium, the maximum enzyme activity of Lcc1 was 22,594 U/L after high-density fermentation, which was 1.8-fold increase by shake flask optimization. Furthermore, partially purified laccase was used for the degradation of the octyl phenol and 4-tert-octylphenol, which displayed excellent degradation capacity. After 24 h, the degradation rate of 200 mg/L of 4-tert-octylphenol at 40 °C, pH 4.5 using 50 mM tartaric acid buffer with 1500 U/L purified laccase enzyme in L/A (laccase/ABTS) system was 97.2%. For octyl phenol, the degradation rate was 93.1%. All of the results suggested that the laccase Lcc1 significantly reduced or eliminated the toxicity of octyl phenol and 4-tert-octylphenol, which may be suitable for typical phenolic pollutants in the environment.

The thermostable GH78 family α-L-rhamnosidase DthRha from Dictyoglomus thermophilum DSM3960 was found to have the ability to remove the α-L-rhamnose moiety that was directly linked to the aglycone by an α-1-rhamnosidic bond at the C-3 position of epimedium flavonoids. It exhibited high specific activity on p-nitrophenyl-α-L-rhamnopyranoside (pNPR) (281.06 U/mg), followed by epimedin C (30.42 U/mg), icariin (9.74 U/mg), baohuoside I (1.02 U/mg) and 2’-O-rhamonosylicariside II (3.74 U/mg). In addition, the thermostable glucosidase Dth3 from Dictyoglomus thermophilum DSM3960, which exhibits β-xylosidase activity and β-glucosidase activity, was purified. The main enzymatic properties of the two thermostable glycosidases were compared, and these glycosidases were successfully utilized in the preparation of pharmacologically active icaritin from the total flavonoid extract of epimedium. Finally, 5 g/L of the total flavonoid extract of epimedium was completely transformed into 207.95 mg/L icaritin at pH 5.5 and 80 °C for a total of 4 h. This is the first report on the efficient biotransformation of the total flavonoid extract of epimedium into icaritin by two thermostable enzymes with high productivity. The cost of icaritin preparation will be substantially reduced by converting all the major ingredients in the total flavonoid extract of epimedium.

To efficiently recycle the GH78 thermostable rhamnosidase (TpeRha) and easily separate it from reaction mixture and furtherly improve the enzyme properties, the magnetic particle Fe3O4-SiO2-NH2-Cellu-ZIF8 (FSNcZ8) was prepared through modifying Fe3O4-NH2 with tetraethyl silicate (TEOS), microcrystalline cellulose and zinc nitrate hexahydrate. The FSNcZ8 displayed better magnetic stability and higher-temperature stability than unmodified Fe3O4-NH2 (FN), and it was used to adsorb and immobilize the GH78 thermostable rhamnosidase (TpeRha) from the Thermotoga petrophilea 13995. The properties of FSNcZ8-TpeRha were as follows: The optimal reaction temperature and pH were 90°C and 5.0; the highest activity of FSNcZ8-TpeRha approached 714 U/g; In addition, FSNcZ8-TpeRha had better higher-temperature stability than FN, after incubation at 80°C for 3 h, the residual enzyme activities of FSNcZ8-TpeRha, FN-TpeRha and free enzyme were 93.5%, 63.32% and 62.77%, respectively. The organic solvent tolerance and the monosaccharides tolerance of FSNcZ8-TpeRha, compared with free TpeRha, were greatly improved. Using Naringin (1 mmol/L) as the substrate, the optimal converting conditions were as follows: FSNcZ8-TpeRha concentration is 6 U/mL; induction temperature is 80°C; the pH is 5.5; induction time is 30 min, and the yield of products was same as free enzymes. After 10 times of repeated reaction, the conversion of Naringin remained above 80%, which showed a great improvement of the catalytic efficiency and repeated utilization at the immobilized α-L-rhamnosidase.

The thermostable GH3 family β-glucosidase DthBgl3 and thermostable GH78 family α-l-rhamnosidase DthRha from Dictyoglomus thermophilum DSM3960 were successfully immobilized by industrial amino resin 1000NH. The optimal reaction temperature and pH of 1000NH-DthBgl3 was 85 °C and pH 5.0. Over 65% residual enzyme activity maintained for 1000NH-DthBgl3 after a 3-h incubation under 85 °C, while about 20% residual enzyme activity maintained for free DthBgl3. The optimal reaction temperature and pH of 1000NH-DthRha was 95 °C and pH 6.5. Over 90% residual enzyme activity maintained for 1000NH-DthRha after a 3-h incubation under 90 °C, while about 22% residual enzyme activity maintained for free DthRha. Meanwhile, immobilized 1000NH-DthBgl3 and 1000NH-DthRha were successfully and could completely transform all major ingredient of 10 g/L total flavonoids extract from Epimedium (TFEE) into icaritin. After 15 cycles (45 h) of repeated use at 85 °C, 3 U 1000NH-DthBgl3 showed a molar conversion rate of 73.12%, initial activity of 30.09% and productivity of 124 mg/L/h, while 15 U 1000NH-DthRha showed a molar conversion rate of 88.50%, initial activity of 85.31% and productivity of 75 mg/L/h after ten cycles (60 h) of repeated use at 85 °C. The cooperation of two immobilized enzymes showed a molar conversion rate of 87.21% and productivity of 141 mg/L/h after 15 cycles of repeated use at 85 °C. This is the first report on immobilization of two thermostable glycosidases from thermophilic bacteria and their cooperated biocatalysis of all major ingredients of TFEE into icaritin with high productivity under a high substrate concentration.

In recent years, deep eutectic solvent (DES) has attracted comprehensive attention on the extraction of natural products, and is regarded as an alternative to traditional organic solvents for the environmental advantages. Twenty-six DESs were compared for their extraction yield of total flavonoids and isovitexin (the main flavonoid in Celtis sinensis) from Celtis sinensis. The results show that the extraction yields of total flavonoids by betaine/glycolic acid (DES8), ethylamine hydrochloride/1,2-propanediol (DES12) and tetrapropylammonium bromide/lactic acid (DES17) are the highest, while the extraction yields of isovitexin by ethylene glycol/malonic acid (DES23), ethylene glycol/glycolic acid (DES24) and 1,2-propanediol/glycolic acid (DES26) are the highest. The extraction conditions using the above six DESs were further optimized systematically. Under optimum conditions, the extraction rates of total flavonoids and isovitexin can be increased up to 95.39 and 10.58 mg g−1, respectively, which were significantly higher than that of methanol extraction. In order to exclude the effect of DESs on the bioactivity of Celtis sinensis extract, the macroporous resin D-101 was used to purify the total flavonoids from DESs extract, and the recovery rates of flavonoids from the above six kinds of DESs were all over 80%. Next, the anti-inflammatory activity of DES extracts was compared using a lymphocyte transformation experiment. The result showed that the inhibition rate of the DES24 extract on the proliferation of Con A-activated T cells was up to 72% with an IC50 value of 124.8 μg mL−1. None of the DESs extracted exhibited cytotoxicity on normal T cells. The mechanism of the anti-inflammatory activity against Con A-activated T cells may be that DES24 flavonoids extract induced the apoptosis of inflammatory T cells, and activated the expression of pro-apoptotic protein. Taken together, DES has showed significant advantages on the extraction of natural products for the relatively mild extraction condition, high yield and environmental-friendliness.

Berberine, as a representative isoquinoline alkaloid, exhibits significant hypolipidemic activity in both animal models and clinical trials. Recently, a large number of studies on the lipid-lowering mechanism of berberine and studies for improving its hypolipidemic activity have been reported, but for the most part, they have been either incomplete or not comprehensive. In addition, there have been a few specific reviews on the lipid-reducing effect of berberine. In this paper, the physicochemical properties, the lipid-lowering mechanism, and studies of the modification of berberine all are discussed to promote the development of berberine as a lipid-lowering agent. Subsequently, this paper provides some insights into the deficiencies of berberine in the study of lipid-lowering drug, and based on the situation, some proposals are put forward.

Hyperoside is used as the standard to assess the quality of Hyperin perforatum L and exhibits many biological properties. To improve the yield of hyperoside in Escherichia coli, four UDP-galactose synthesis pathways were screened and a recombinant strain was reconstructed by using an efficient UDP-galactose generation system coupled with Petunia hybrida glycosyltransferase to biosynthesis hyperoside from quercetin. By adopting the resting cell transformation, maximal hyperoside production of 4574 mg/L and average productivity of 63.5 mg/L/h were achieved after 72 h of biotranformation. Subsequently through recycling of resting cells, average productivity within 72 h reached 126 mg/L/h, which was 100% higher than that in the batch fermentation. Hyperoside production reached equivalent to 18,000 mg/L by recycling seven times of resting cell in 168 h, which was 393% of that in the batch fermentation and the first to reach 10 g per liter scale in E. coli. Therefore, this study provides an efficient method for construction of UDP-galactose synthesis pathway and hyperoside production in E. coli.

UDP-rhamnose is the main type of sugar donor and endows flavonoids with special activity, selectivity, and pharmacological properties by glycosylation. In this study, several UDP-glucose synthesis pathways and UDP-rhamnose synthases were screened to develop an efficient UDP-rhamnose biosynthesis pathway in Escherichia coli. Maximal UDP-rhamnose production reached 82.2 mg/L in the recombinant strain by introducing the cellobiose phosphorolysis pathway and Arabidopsis thaliana UDP-rhamnose synthase (AtRHM). Quercitrin production of 3522 mg/L was achieved in the recombinant strain by coupling the UDP-rhamnose generation system with A. thaliana rhamnosyltransferase (AtUGT78D1) to recycle UDP-rhamnose. To further increase UDP-rhamnose supply, an NADPH-independent fusion enzyme was constructed, the UTP supply was improved, and NADPH regenerators were overexpressed in vivo. Finally, by optimizing the bioconversion conditions, the highest quercitrin production reached 7627 mg/L with the average productivity of 141 mg/(L h), which is the highest yield of quercitrin and efficiency of UDP-rhamnose supply reported to date in E. coli. Therefore, the method described herein for the regeneration of UDP-rhamnose from cellobiose may be widely used for the rhamnosylation of flavonoids and other bioactive substances.

Epimedin C, a major flavonoid extracted from Herba Epimedii, is a precursor of minor flavonoid icaritin that is a desired drug candidate with remarkable anti-cancer activities. For enhancing the biotransformation efficiency of icaritin, a novel α- l -rhamnosidase gene was cloned from hyperthermophiles Thermotoga petrophila DSM 13995. TpeRha displayed optimal activity at a pH of 4.5 and a temperature of 90 °C. The Km and Kcat of TpeRha for p-nitrophenyl-α- l -rhamnopyranoside were 2.99 mM and 651.73 s−1, respectively. It displayed broad catalytic ability in cleavage of the outer and inner rhamnopyranosyl moieties on the C-3 carbon of epimedin C. Further, this enzyme was utilized to improve the efficiency of the co-conversion system in transforming epimedin C into icaritin, in combined with a thermostable β-glucosidase Tpebgl1. In addition, a transformation pathway (epimedin C -icariin - icariside I - icaritin) with a high efficiency for icaritin production was screened. After a two-stage transformation under optimized conditions (90 °C, pH 4.5, 80 U/mL of TpeRha and 1.2 U/mL of Tpebgl1), 1 g/L of epimedin C was transformed into 0.4337 g/L of icaritin within 150 min, with a corresponding molar conversion rate of 96.9 %. This is the first report of enzymatic transformation on preparing icaritin from epimedin C by using thermostable glycosidase.

Four novel betulinic acid (BA) derivatives modified at the C-3 position were prepared by the Mitsunobu reaction and subsequently evaluated for antitumor activity against four common cancer cell lines in vitro. The results from the MTT assay revealed that the four tested compounds showed remarkable cytotoxic activity against four cancer cell lines, much better than BA. Western blotting results indicated that the four compounds, especially compound 2c, caused a significant up-regulation expression of the caspase-12 in CT26 cell. Our results showed that configuration inversions of chiral C-3 of BA could also produce BA derivatives with potent antitumor activity.

Isoorientin and isovitexin, kinds of flavone C-glycosides, exhibit a number of biological properties. In this work, The C-glucosyltransferase (Gt6CGT) gene from Gentiana triflora was cloned and expressed in Escherichia coli BL21(DE3). The optimal activity of Gt6CGT was at pH 7.5 and 50° C. The enzyme was stable over pH range of 6.5–9.0, and had a 1-h half-life at 50° C. The Vmax for luteolin and apigenin was 21.1 nmol/min/mg and 31.7 nmol/min/mg, while the Km was 0.21 mM and 0.22 mM, respectively. Then, we developed an environmentally safe and efficient method for isoorientin and isovitexin production using the coupled catalysis of Gt6CGT and Glycine max sucrose synthase (GmSUS). By optimizing coupled reaction conditions, the titer of isoorientin and isovitexin reached 3820 mg/L with a corresponding molar conversion of 94.7% and 3772 mg/L with a corresponding molar conversion of 97.1%, respectively. The maximum number of UDP-glucose regeneration cycles (RCmax) reached 28.4 for isoorientin and 29.1 for isovitexin. The coupled catalysis reported herein represents a promising method to meet industrial requirements for large-scale isoorientin and isovitexin production in the future.

A thermostable β-xylosidase gene Tpexyl3 from Thermotoga petrophila DSM 13,995 was cloned and overexpressed by Escherichia coli. Recombinant Tpexyl3 was purified, and its molecular weight was approximately 86.7 kDa. Its optimal activity was exhibited at pH 6.0 and 90 °C. It had broad specificity to xylopyranosyl, arabinopyranosyl, arabinofuranosyl and glucopyranosyl moieties. The β-xylosidase activity of the recombinant Tpexyl3 was 6.81 U/mL in the LB medium and 151.4 U/mL in a 7.5 L bio-reactor. It was applied to transform ginsenoside extract into the pharmacologically active minor ginsenoside 20(S)-Rg3, which was combined with thermostable β-glucosidase Tpebgl3. After transforming under optimal condition, the 20 g/L of ginsenoside extract was transformed into 6.28 g/L of Rg3 within 90 min, with a corresponding molar conversion of 95.0% and Rg3 productivity of 1793.49 mg/L/h, respectively. This study is the highest report of a GH3 family glycosidase with arabinopyranosidase activity and also the first report on the high substrate concentration bioconversion of ginsenoside extract to ginsenoside 20(S)-Rg3 by using two thermostable glycosidases.

Kaempferol and astragalin are used as standards to assess the quality of Ginkgo biloba extract and Radix astragali, respectively, and possess numerous biological properties. In this study, we constructed a recombinant strain with a highly efficient biosynthetic pathway of kaempferol by screening key enzyme genes, designing a synthetic fusion enzyme and increasing the gene copy number. By optimizing conversion and fed-batch fermentation conditions, maximal kaempferol production reached 1184.2 ± 16.5 mg/L, which represents the highest yield of kaempferol from naringenin reported to date. Based on this result, glycosyltransferase (AtUGT78D2) and an efficient UDP-glucose synthesis pathway were introduced into the recombinant strain to produce astragalin, resulting in maximal astragalin production at 1738.5 ± 24.8 mg/L without kaempferol accumulation. The efficient synthesis pathway described in this study for kaempferol and astragalin biosynthesis can be widely used for flavonoid biosynthesis in Escherichia coli.

In this study, a combined optimization strategy, based on co-expression of molecular chaperones and supplementation of osmolytes, was used to reduce the formation of inclusion bodies and enhance the expression of the soluble form of 4-α-glucanotransferase. The 4-α-glucanotransferase yield was enhanced by co-expression with pGro7 and supplementation of trimetlylamine oxide. Subsequently, the effects of process conditions (temperature, inducer concentration, and arabinose concentration) on cell growth and 4-α-glucanotransferase production were also investigated in shake flasks. In addition, a modified high-cell-density fermentation approach was proposed and applied in 3-L fermentor supplied with l -arabinose and trimetlylamine oxide, which achieved a dry cell weight of 65.92 g·L−1. Through this cultivation approach at 28 °C, the activity of 4-α-glucanotransferase reached 332.5 U·g−1 dry cell weight, which was 24.6-fold greater than the initial activity in shake flask cultivation. This combined strategy is expected to provide an efficient and economical approach to overproduction of aggregation prone proteins on a large scale.

Orientin and vitexin, important components of bamboo-leaf extracts, are C-glycosylflavones which exhibit a number of interesting biological properties. In this work, we developed an efficient biocatalytic cascade for orientin and vitexin production consisting of Trollius chinensis C-glycosyltransferase (TcCGT) and Glycine max sucrose synthase (GmSUS). In order to relieve the bottleneck of the biocatalytic cascade, the biocatalytic efficiency, reaction condition compatibilities and the ratio of the enzymes were determined. We found that the specific activity of TcCGT was significantly influenced by enzyme dose and Triton X-100 or Tween 20 (0.2%). Co-culture of BL21-TcCGT-Co and BL21-GmSUS-Co affected the catalytic efficiency of TcCGT and GmSUS, and the maximum orientin production rate reached 47 μM/min at the inoculation ratio of 9:1. The optimal pH and temperature for the biocatalytic cascade were pH 7.5 and 30 °C, respectively. Moreover, the high dose of the enzymes can improve the tolerance of biocatalytic cascade to substrate inhibition in the one-pot reaction. By using a fed-batch strategy, maximal titers of orientin and vitexin reached 7090 mg/L with a corresponding molar conversion of 98.7% and 5050 mg/L with a corresponding molar conversion of 97.3%, respectively, which is the highest titer reported to date. Therefore, the method described herein for efficient production of orientin and vitexin by modulating catalytic efficiencies of enzymes can be widely used for the C-glycosylation of flavonoids.

As is well-known, endo-1,4-β-xylanase and β-xylosidase are the rate-limiting enzymes in the degradation of xylan (the major hemicellulosic component), main functions of which are cleavaging xylan to release xylooligosaccharides (XOS) and xylose that these two compounds have important application value in fuel, food, and other industries. This study focuses on enzymatic hydrolysis of poplar sawdust xylan for production of XOS and xylose by a GH11 endo-1,4-β-xylanase MxynB-8 and a GH39 β-xylosidase Xln-DT. MxynB-8 showed excellent ability to hydrolyze hemicellulose of broadleaf plants, such as poplar. Under optimized conditions (50°C, pH 6.0, dosage of 500 U/g, substrate concentration of 2 mg/mL), the final XOS yield was 85.5%, and the content of XOS2−3 reached 93.9% after 18 h. The enzymatic efficiency by MxynB-8 based on the poplar sawdust xylan in the raw material was 30.5%. Xln-DT showed excellent xylose/glucose/arabinose tolerance, which is applied as a candidate to apply in degradation of hemicellulose. In addition, the process and enzymatic mode of poplar sawdust xylan with MxynB-8 and Xln-DT were investigated. The results showed that the enzymatic hydrolysis yield of poplar sawdust xylan was improved by adding Xln-DT, and a xylose-rich hydrolysate could be obtained at high purity, with the xylose yield of 89.9%. The enzymatic hydrolysis yield was higher (32.2%) by using MxynB-8 and Xln-DT together. This study provides a deep understanding of double-enzyme synergetic enzymolysis of wood polysaccharides to valuable products.

Berberine (BBR), a kind of quaternary ammonium benzylisoquinoline alkaloids with multiple pharmacological activities, has been regarded as a promising lipid-lowering agent in the field of drug repurposing. Particularly, the chemical modification at the C-9 position of BBR can remarkably improve its lipid-lowering efficacy. In this study, thirteen novel BBR derivatives were rationally designed, synthesized, and evaluated by preliminary pharmacological tests. The results showed that most compounds exhibited more potent hypolipidemic activities when compared with BBR and simvastatin. Among these compounds, compound 2h-1 and 2h-2 exhibited better activity profiling in these four tests involving with inhibition of total cholesterol (TCHO), triglyceride (TG), and low-density lipoprotein cholesterol (LDLC) and the increase of high-density lipoprotein cholesterol (HDLC). Correspondingly, the BBR analogs with 9-O-cinnamic moiety probably exhibited potent lipid-lowering activity, and should be exploited as an important versatile template for the development of BBR-like lipid-lowering agents.

In this study, a α-l-rhamnosidase gene from Bacteroides thetaiotaomicron VPI-5482 was cloned and expressed in Escherichia coli. The specific activity of rhamnosidase was 0.57 U/mg in LB medium with 0.1 mM Isopropyl β-d-Thiogalactoside (IPTG) induction at 28 °C for 8 h. The protein was purified by Ni-NTA affinity, which molecular weight approximately 83.3 kDa. The characterization of BtRha was determined. The optimal activity was at 55 °C and pH 6.5. The enzyme was stable in the pH range 5.0-8.0 for 4 h over 60%, and had a 1-h half-life at 50 °C. The Kcat and Km for p-nitrophenyl-α-l-rhamnopyranoside (pNPR) were 1743.29 s-1 and 2.87 mM, respectively. The α-l-rhamnosidase exhibited high selectivity to cleave the α-1,2 and α-1,6 glycosidic bond between rhamnoside and rhamnoside, rhamnoside and glycoside, respectively, which could hydrolyze rutin, hesperidin, epimedin C and 2″-O-rhamnosyl icariside II. Under the optimal conditions, BtRha transformed epimedin C (1 g/L) to icariin by 90.5% in 4 h. This study provides the first demonstration that the α-l-rhamnosidase could hydrolyze α-1,2 glycosidic bond between rhamnoside and rhamnoside.

UDP-rhamnose is synthesized by UDP-rhamnose synthase, but the reaction requires two kinds of cofactors, NAD+ and NADPH. In this work, a cofactor self-sufficient UDP-rhamnose regeneration system was described herein. The UDP-rhamnose synthase (VvRHM) gene from Vitis vinifera was cloned and expressed in Escherichia coli and characterizations of VvRHM were determined. The N-terminal region of VvRHM was fused with the bifunctional UDP-4-keto-6-deoxy- d -glucose 3,5-epimerase/UDP-4-keto-rhamnose 4-keto-reductase (NRS/ER) from Arabidopsis thaliana to obtain the fusion enzyme (VvRHM-NRS), which was NADPH-independent and could convert UDP-glucose to UDP-rhamnose with NADH self-sufficient. The optimal activity of VvRHM-NRS was at pH 7.5 and 30 °C. Apparent Km and Vmax of VvRHM-NRS for UDP-glucose were 88 ± 9 μM and 12.7 ± 0.6 nmol/min/mg, and for NAD+ were 69 ± 7 μM and 11.9 ± 0.5 nmol/min/mg. Then, a novel process for the synthesis of UDP-rhamnose from sucrose, NAD+, and UDP was developed by using VvRHM-NRS coupled with Glycine max sucrose synthase (GmSUS). By optimizing coupled reaction conditions, UDP-rhamnose production reached 0.57 mM. Finally, UDP-rhamnose regeneration system was tested to synthesize quercitrin with A. thaliana glycosyltransferase (AtUGT78D1). Therefore, VvRHM-NRS coupled with GmSUS presented a green chemistry approach for the UDP-rhamnose regeneration in glycosylation of flavonoids and other bioactive substances.

Proanthocyanidin (PAC) holds strong free radicals scavenging ability and is widely used as oxygen free radical scavenger. Huge demand, safety and economic aspect are forcing the PAC extraction to explore new resource and greener solvent. An efficient extraction method of PAC from Ginkgo biloba leaves was established by employing deep eutectic solvent (DES)-water mixture. After a rational design, a DES-water mixture (named as Ch-M55) was chosen as the extraction solvent, which was prepared from choline chloride and malonic acid at a molar ratio of 1:2 with water addition of 55% (w/w). The main factors affecting the extraction yield were statistically optimized using a central composite design combined with response surface methodology (RSM). The optimal conditions were obtained as follows: extraction temperature of 65 °C, extraction time of 53 min and Ch-M55 to solid ratio of 10.57:1 (v/w, mL/g). The PAC extraction yield was 22.19 ± 0.71 mg/g under the optimized conditions, which was much higher than those of conventional organic solvents. The antioxidant activity of PAC extracted by Ch-M55 was similar to that of 70% acetone, but a little less than 70% methanol and 70% ethanol. The differences in constituent and polymerization degree of PAC extracted by different solvents might account for the difference in antioxidant activity. In consideration of biodegradability and pharmaceutical acceptability, the Ch-M55-based extraction method is obviously efficient, green and ecofriendly. Extraction of PAC from Ginkgo biloba leaves also provides a new PAC resource.

Background Dihydro-β-ionone is a principal aroma compound and has received considerable attention by flavor and fragrance industry. The traditional method of preparing dihydro-β-ionone has many drawbacks, which has restricted its industrial application. Therefore, it is necessary to find a biotechnological method to produce dihydro-β-ionone. Results In this study, the enoate reductase with high conversion efficiency of β-ionone to dihydro-β-ionone, DBR1, was obtained by screening four genetically engineered bacteria. The product, dihydro-β-ionone, was analyzed by GC and GC-MS. The highest dihydro-β-ionone production with 308.3 mg/L was detected in the recombinant strain expressing DBR1 which was later on expressed and purified. Its optimal temperature and pH were 45 °C and 6.5, respectively. The greatest activity of the purified enzyme was 356.39 U/mg using β-ionone as substrate. In the enzymatic conversion system, 1 mM of β-ionone was transformed into 91.08 mg/L of dihydro-β-ionone with 93.80% of molar conversion. Conclusion DBR1 had high selectivity to hydrogenated the 10,11-unsaturated double bond of β-ionone as well as high catalytic efficiency for the conversion of β-ionone to dihydro-β-ionone. It is the first report on the bioconversion of β-ionone to dihydro-β-ionone by using enoate reductase. Electronic supplementary material The online version of this article (10.1186/s12896-018-0438-x) contains supplementary material, which is available to authorized users.

Background β-D-xylosidase is a vital exoglycosidase with the ability to hydrolyze xylooligosaccharides to xylose and to biotransform some saponins by cleaving outer β-xylose. β-D-xylosidase is widely used as one of the xylanolytic enzymes in a diverse range of applications, such as fuel, food and the pharmaceutical industry; therefore, more and more studies have focused on the thermostable and xylose-tolerant β-D-xylosidases. Results A thermostable β-xylosidase gene (xln-DT) of 1509 bp was cloned from Dictyoglomus thermophilum and expressed in E.coli BL21. According to the amino acid and phylogeny analyses, the β-xylosidase Xln-DT is a novel β-xylosidase of the GH family 39. The recombinant β-xylosidase was purified, showing unique bands on SDS-PAGE, and had a protein molecular weight of 58.7 kDa. The β-xylosidase Xln-DT showed an optimal activity at pH 6.0 and 75 °C, with p-nitrophenyl-β-D-xylopyranoside (pNPX) as a substrate. Xln-DT displayed stability over a pH range of 4.0-7.5 for 24 h and displayed thermotolerance below 85 °C. The values of the kinetic parameters Km and Vmax for pNPX were 1.66 mM and 78.46 U/mg, respectively. In particular, Xln-DT displayed high tolerance to xylose, with 60% activity in the presence of 3 M xylose. Xln-DT showed significant effects on the hydrolyzation of xylobiose. After 3 h, all the xylobiose tested was degraded into xylose. Moreover, β-xylosidase Xln-DT had a high selectivity for cleaving the outer xylose moieties of natural saponins, such as notoginsenoside R1 and astragaloside IV, which produced the ginsenoside Rg1 with stronger anti-fatigue activity and produced cycloastragenol with stronger anti-aging activity, respectively. Conclusion This study provides a novel GH 39 β-xylosidase displaying extraordinary properties of highly catalytic activity at temperatures above 75 °C, remarkable hydrolyzing activity of xylooligosaccharides and rare saponins producing ability in the pharmaceutical and commercial industries. Electronic supplementary material The online version of this article (10.1186/s12896-018-0440-3) contains supplementary material, which is available to authorized users.

The thermostable GH3 β-glycosidase (Tpebgl3) from Thermotoga petrophila DSM 13995 was immobilized on macroporous resin NKA-9 modified with polyethylenimine (PEI) and glutaraldehyde (named NKA-9II). The properties of NKA-9II were as follows: the optimal conditions were the same as that of the free enzyme (pH 5.0; 90 °C), and the highest activity with cellobiose as the substrate approached 1.7 U/g; the thermostability, pH stability and glucose tolerance were greatly improved; the residual activity of NKA-9II was 68% of the initial activity at the end of 10 repeated cycles. Moreover, it was found that 2 mM Zn2+ increased the relative activity of NKA-9II to 192% and 199% with cellobiose and p-nitrophenyl-β- d -glucopyranoside (pNPG) as substrates, respectively. Meanwhile, Zn2+ could greatly improve the reusability, high-temperature stability, and glucose tolerance of NKA-9II. In particular, 84% of the residual activity of NKA-9II with 2 mM Zn2+ was retained, which was 21% higher than that with free metal ion after incubation at 85 °C for 7 h; when the glucose concentration was 400 mM, the free Tpebgl3 was completely inactivated, and NKA-9II with 2 mM Zn2+ maintained 63% of its initial activity, which was 19.5% higher than the activity of NKA-9II in the absence of Zn2+.

Plywood panels prepared from loblolly pine with cured phenol resin (PF) and urea-formaldehyde resin (UF) were submitted to accelerated aging and the microstructures and mechanics of wood-resin interphase were studied by nanoindentation (NI) and nanoscale dynamic mechanical analysis (Nano-DMA). The mass loss (ML) of wood, PF and UF resins were 3.4, 5.0 and 4.6% after aging treatment, respectively, and a large amount of microcracks were observed on the surface of wood and resins after aging treatment, which also affected the static mechanics of the cell walls far from the interphase region and the resins in the interphase region. The elastic modulus (Er) and hardness (H) values of the cell wall decreased by 7.2 and 9.5%, respectively, against the untreated control. The storage and loss modulus of the resins decreased significantly after aging treatment. The significant inconsistency in the mechanics, shrinkage and swelling properties of wood cell wall and resin in the interphase region after aging treatment resulted in a decrease of about 47 and 51% on the average bonding strength of the plywood made of PF and UF resins, respectively.

The discovery of mammalian target of rapamycin (mTOR) kinase inhibitors has always been a research hotspot of antitumor drugs. Consensus scoring used in the docking study of mTOR kinase inhibitors usually improves hit rate of virtual screening. Herein, we attempt to build a series of consensus scoring models based on a set of the common scoring functions. In this paper, twenty-five kinds of mTOR inhibitors (16 clinical candidate compounds and 9 promising preclinical compounds) are carefully collected, and selected for the molecular docking study used by the Glide docking programs within the standard precise (SP) mode. The predicted poses of these ligands are saved, and revaluated by twenty-six available scoring functions, respectively. Subsequently, consensus scoring models are trained based on the obtained rescoring results by the partial least squares (PLS) method, and validated by Leave-one-out (LOO) method. In addition, three kinds of ligand efficiency indices (BEI, SEI, and LLE) instead of pIC50 as the activity could greatly improve the statistical quality of build models. Two best calculated models 10 and 22 using the same BEI indice have following statistical parameters, respectively: for model 10, training set R2 = 0.767, Q2 = 0.647, RMSE = 0.024, and for test set R2 = 0.932, RMSE = 0.026; for model 22, raining set R2 = 0.790, Q2 = 0.627, RMSE = 0.023, and for test set R2 = 0.955, RMSE = 0.020. These two consensus scoring model would be used for the docking virtual screening of novel mTOR inhibitors.

Two-phase systems developed with hydrophilic deep eutectic solvents (DESs) and hydrophobic DESs were prepared in this study for the first time. Ginkgo biloba leaves containing several bioactive compounds were chosen as the model plant material to evaluate the possibility of the two-phase DES system as a designer solvent for the simultaneous extraction of the various bioactive compounds with different polarities. After tailoring, a two-phase DES system prepared with two hydrophilic DESs and one hydrophobic DES at a volume ratio of 35 : 5 : 40 could effectively extract flavonoids, terpene trilactones (TTLs), procyanidine (PAC) and polyprenyl acetates (PPAs) simultaneously from the Ginkgo biloba leaves. The extraction conditions were further optimized using the response surface methodology. When the two-phase DES system was employed in the extraction under the optimal conditions, the PPAs moved into the hydrophobic phase, and the flavonoids, TTLs, and PAC were enriched into the hydrophilic phase. The first extraction rates for PAC, flavonoids, TTLs and PPAs were 86.07%, 77.72%, 93.29% and 94.63%, respectively. After extraction, the hydrophilic and hydrophobic phases containing different bioactive compounds could be easily separated for different preparations. Extraction with the two-phase DES system is a new application trial of DESs, which has the potential to be widely used for the extraction of bioactive compounds from plant materials or removal of different polar impurities from specific extracts.

Glycosylation and methylation of flavonoids are the main types of structural modifications and can endow flavonoids with greater stability, bioactivity, and bioavailability. In this study, five types of O-methyltransferases were screened for producing O-methylated luteolin, and the biosynthesis strategy of 3’-O-methylisoorientin from luteolin was determined. To improve the production of 3’-O-methylluteolin, the S-adenosyl- l -methionine synthesis pathway was reconstructed in the recombinant strain by introducing S-adenosyl- l -methionine synthetase genes. After optimizing the conversion conditions, maximal 3’-O-methylluteolin production reached 641 ± 25 mg/L with a corresponding molar conversion of 76.5 %, which was the highest titer of methylated flavonoids reported to date in Escherichia coli. 3’-O-Methylluteolin (127 mg) was prepared from 250 mL of the broth by silica gel column chromatography and preparative HPLC with a yield of 79.4 %. Subsequently, we used the biocatalytic cascade of Gentiana triflora C-glycosyltransferase (Gt6CGT) and Glycine max sucrose synthase (GmSUS) to biosynthesize 3’-O-methylisoorientin from 3’-O-methylluteolin in vitro. By optimizing the coupled reaction conditions and using the fed-batch operation, maximal 3’-O-methylisoorientin production reached 226 ± 8 mg/L with a corresponding molar conversion of 98 %. Therefore, this study provides an efficient method for the production of novel 3’-O-methylisoorientin and the biosynthesis strategy for methylated C-glycosylation flavonoids by selective O-methylation/C-glycosylation motif on flavonoids.

The effects of the penetration of polymeric diphenyl methane diisocyanate (pMDI) on the chemical structure as well as the static and dynamic mechanical properties of wood cell walls (CWs) were investigated by atomic force microscopy with infrared radiation (AFM-IR) and nanoindentation (NI). Results indicated that the possible penetration of some pMDI molecules into the CW affected the mechanical properties of wood CW significantly. The physical and chemical interactions between pMDI and CW may strengthen the connections between the cell-wall materials and thus improved the static elastic modulus and short-term creep resistance of the CW. The elastic modulus (E r) of CWs was increased from 16.5 to 17.7 GPa; the creep ratio of the CWs decreased by 15% after the penetration of pMDI. Dynamic NI properties indicated that the effective penetration of pMDI had a positive effect on the reduced storage modulus (E r′), whereas it negatively affected the loss modulus (E r″) and the damping coefficient (tan δ) of wood CW in a large frequency scale.

Summary A novel α-L-rhamnosidase was isolated and purified from Aspergillus oryzae NL-1. The enzyme was purified 13.2-fold by ultrafiltration, ion exchange and gel filtration chromatography with an overall recovery of 6.4% and specific activity of 224.4 U/mg, and the molecular mass of its subunit was approximately 75 kDa. Its optimal temperature and pH were 65 °C and 4.5, respectively. The enzyme was stable in the pH range 3.5–7.0, and it showed good thermostability at higher temperatures. The KM, kcat and kcat/KM values were 5.2 mm, 1624 s−1 and 312 s−1 mm−1 using pNPR as substrates, respectively. Moreover, the enzyme exhibited transglycosylating activity, which could synthesise rhamnosyl mannitol through the reactions of transglycosylation with inexpensive rhamnose as the glycosyl donor. Our findings indicate that the enzyme has potential value for glycoside synthesis in the food industry.

Hyperoside exhibits many biological properties and is more soluble in water than quercetin. A uridine 5′-diphosphate (UDP) galactose regeneration system and one-pot synthesis of hyperoside was described herein. Glycine max sucrose synthase (GmSUS) was coupled with Escherichia coli UDP-galactose 4-epimerase (GalE) to regenerate UDP-galactose from sucrose and UDP. Petunia hybrida glycosyltransferase (PhUGT) with high activity toward quercetin was used to synthesize hyperoside via the UDP-galactose regeneration system. The important factors for optimal synergistic catalysis were determined. Through the use of a fed-batch operation, the final titer of hyperoside increased to 2134 mg/L, with a corresponding molar conversion of 92% and maximum number of UDP-galactose regeneration cycles (RCmax) of 18.4 under optimal conditions. Therefore, the method described herein for the regeneration of UDP-galactose from UDP and sucrose can be widely used for the glycosylation of flavonoids and other bioactive substances.

The recombinant thermostable β-glucosidase from Thermotoga thermarum DSM 5069T exhibited high selectivity to catalyze the conversion of ginsenoside Re and Rg1 to the more pharmacologically active minor ginsenoside Rg2 and Rh1, respectively. At a concentration of 1.36 U/mL of the enzyme, a temperature of 85°C, and pH 5.5, 10 g/L ginsenoside Re was transformed into 8.02 g/L Rg2 within 60 min, and 2 g/L ginsenoside Rg1 was transformed into 1.56 g/L Rh1 within 60 min. This paper provides the first report on the production of ginsenoside Rg2 and Rh1 by a highly thermostable β-glucosidase.

Nanoclay is a natural mineral that has great potential as a reinforcing filler in wood adhesives. In order to investigate the reinforcing mechanism more clearly, the crystalline structure, chemical properties, morphology, and thermal stability of pure PF and organic nanoclay-reinforced phenol formaldehyde (PF-OMMT) adhesive were characterized. The comparative mechanical properties of pure PF adhesive and PF-OMMT in the bondlines of plywood were analyzed by nanoindentation (NI) under different service environments and the shear strain distribution on the interphase was also measured by a digital image correction technique (DIC). X-ray diffraction (XRD), Fourier transform infrared (FTIR) and transmission electron microscopy (TEM) results indicated good dispersion of the clay in the PF matrix. The modified adhesive showed greater thermal stability than did the control adhesive, as evaluated by thermo-gravimetric analysis (TGA). The good dispersion of nanoclay and the positive effects of the nanoclay on the adhesive's water and heat resistance may have contributed to the improved mechanical properties of adhesives in an accelerated durability test. Compared to pure PF, the reduced elastic modulus and hardness of PF-OMMT in the bondline increased significantly and the strain distribution was much more uniform, resulting in an observed increase of macro-bonding strength of plywood, especially under conditions of severe cyclic water saturation and drying.

Isorhamnetin-3-O-rhamnoside was synthesized by a highly efficient three-enzyme (rhamnosyltransferase, glycine max sucrose synthase and uridine diphosphate (UDP)-rhamnose synthase) cascade using a UDP-rhamnose regeneration system. The rhamnosyltransferase gene (78D1) from Arabidopsis thaliana was cloned, expressed, and characterized in Escherichia coli. The optimal activity was at pH 7.0 and 45 &deg, C. The enzyme was stable over the pH range of 6.5 to 8.5 and had a 1.5-h half-life at 45 &deg, C. The Vmax and Km for isorhamnetin were 0.646 U/mg and 181 &mu, M, respectively. The optimal pH and temperature for synergistic catalysis were 7.5 and 25 &deg, C, and the optimal concentration of substrates were assayed, respectively. The highest titer of isorhamnetin-3-O-rhamnoside production reached 231 mg/L with a corresponding molar conversion of 100%. Isorhamnetin-3-O-rhamnoside was purified and the cytotoxicity against HepG2, MCF-7, and A549 cells were evaluated. Therefore, an efficient method for isorhamnetin-3-O-rhamnoside production described herein could be widely used for the rhamnosylation of flavonoids.

Ginkgo tea is a kind of health food produced from Ginkgo biloba leaves. The market of Ginkgo tea encountered many difficulties because of its bad palatability and vague function statement. In this study, two kinds of glycosidase were used to improve the flavor of Ginkgo tea, and three kinds of bioactivities were selected to investigate the health care function of the tea infusion. The aroma components extracted by headspace absorb (HSA) method during the making of Ginkgo tea were analyzed by GC-MS. The flavonoids and ginkgolides released into the tea infusion were studied by HPLC. A combination of &beta, glucosidase (&beta, G) and &alpha, rhamnosidase (&alpha, R) was applied during the making of the tea. The contents of characteristic aroma components and the release of total flavonoids and ginkgolides were increased significantly by adding &beta, G and &alpha, R. The composition of flavone glycosides was changed greatly. The free radical scavenging, inhibition of inflammatory cell activation, and tumor cytotoxicity activities of the tea were demonstrably improved. According to the release of active components, Ginkgo tea can be brewed repeatedly for at least three times. The enzymes used here show potential application prospects in the making of Ginkgo tea or tea drink to get higher contents of flavonoids, ginkgolides, and aroma components.

A novel β-xylosidase Dt-2286 from Dictyoglomus turgidum was cloned and overexpressed in Escherichia coli BL21 (DE3). Dt-2286 belonging to glycoside hydrolase (GH) family 3 encodes a polypeptide with 762 amino acid residues with a molecular weight of 85.1 kDa. By optimization of the growth and induction conditions, the activity of β-xylosidase reached 273 U/mL, which is the highest yield reported to date from E. coli in a shake-flask. The optimal activities of the purified Dt-2286 were found at pH 5.0 and 98 °C. It also shows excellent thermostable/haloduric/organic solvent-tolerance. Dt-2286 was revealed to be a multifunctional enzyme with β-xylosidase, α-arabinofuranoside, α-arabinopyranoside and β-glucosidase activities, and Kcat/Km was 5245.316 mM−1 s−1, 2077.353 mM−1 s−1, 1626.454 mM−1 s−1, and 470.432 mM−1 s−1 respectively. Dt-2286 showed significant synergistic effects on the degradation of xylans, releasing more reduced sugars (up to 15.08 fold) by simultaneous addition with endoxylanase. Moreover, this enzyme has good activity in the hydrolysis of epimedium B, demonstrating its versatility in practical applications.

In this study, a recombinant carotenoid cleavage dioxygenase 4 was produced from Osmanthus fragrans by E . coli under different bacterial growth conditions and used to develop a biotechnological method for preparation of natural β-ionone from β-carotene. β-ionone was analyzed by HPLC and OfCCD4 activity was measured based on concentration change of β-ionone. At pH 8.0 and 35 °C, the greatest activity of the purified recombinant protein was 14.3 U/mg and the maximum concentration of β-ionone was 71.186 mg/L within 1 h. Both the enzyme activity and the concentration of β-ionone could increase by nearly 6 times with addition of 9% Triton X-100 and 2% liquid paraffin.

Although ginkgolic acids (GAs) are identified as allergenic components in the leaves and seed coat of ginkgo biloba, it is widely revealed that GAs can exhibit various promising biological activities such as anti-tumor activity and antibacterial activity. Thus, investigating molecular targets underlying biological activities of GAs can contribute to the further development and utilization of GAs. In this paper, five kinds of common GAs were prepared for the large-scale reverse docking experiment. The results obtained by network analysis displayed that GAs can directly target at least four important druggable proteins: peroxisome proliferator-activated receptor (PPARA, PPARD, and PPARG), and dihydroorotate dehydrogenase (DHODH). Subsequently, molecular dynamics (MD) simulations and MM/GBSA calculations demonstrated that all the GAs can bind tightly with DHODH thermodynamically, implying that DHODH was probably considered as one of potential protein targets of GAs. Given the clinical significance of DHODH, these bioactive molecules (GAs) could serve as promising therapeutic agents against acute myeloid leukemia (AML) or the starting scaffold for the development of natural DHODH inhibitors.

Recently, a kind of α-L-rhamnosidase from Bacteroides thetaiotaomicron (BtRha) was characterized and studied for the hydrolysis of natural substrates. In order to investigate catalytic specificity of BtRha, three natural substrates, epimedin C, naringin, and hesperidin, were selected for molecular docking and dynamics simulation. The results revealed that there are two sets of catalytic residues participating in hydrolysis reaction: one set is composed of Arg37 and Glu39 while the other composed of Asp335 and Glu595. This study gained insight into the dynamic catalytic mechanism of BtRha for the first time, providing valuable clues for the rational design of individual α-L-rhamnosidase.

Isoorientin is a C-glycosylated derivative of luteolin and exhibits a number of biological properties. In this study, multiple strategies were adopted to improve isoorientin production from luteolin in Escherichia coli. Isoorientin production was improved substantially by adjusting induction strategies and controlling acetic acid accumulation, with maximum isoorientin production reaching 826 mg/L. Additionally, a novel UDP-glucose synthesis pathway was reconstructed in E. coli through cellobiose phosphorylase-catalyzed phosphorolysis of cellobiose for the production of glucose 1-phosphate, which serves as a precursor in UDP-glucose formation. The results from two mechanisms of UDP-glucose formation in E. coli, cellobiose phosphorolysis and sucrose phosphorolysis, were compared. Increasing the UDP-glucose supply resulted in maximal isoorientin production reaching 1371 mg/L. Finally, isoorientin (1059 mg) was obtained from 1 L of fermentation broth by simple purification steps with a yield of 81.5%. Therefore, this study provides an efficient method for isoorientin production and a novel UDP-glucose synthesis pathway.

In the present study, the performance and separation characteristics of six macroporous resins for the enrichment and purification of total ginkgo flavonoid O-glycosides (TGFs) (quercetin (I), kaempferol (II), isorhamnetin (III)) from Ginkgo Biloba extracts (EGB) are evaluated. The adsorption and desorption properties of TGFs are studied on macroporous resins, including D101, D201, AB-8, HPD400, D301, and D311. Along with the results, AB-8 resin exhibits the best adsorption and desorption capacity for these three ginkgo flavonoid O-glycosides among the six resins. Adsorption isotherms are created on AB-8 resin and fit well to the Langmuir (R2 > 0.96) and Freundlich (R2 > 0.92, 0.3 < 1/n < 0.7) models. After the treatment with gradient elution on AB-8 resin packed chromatography column, the contents of the three main ginkgo flavonoid O-glycosides (I, II, and III) increase from 8.93%, 9.88%, and 6.11% in the extracts to 30.12%, 35.21%, and 14.14%, respectively, in the product. The recoveries of compounds I, II, and III are 88.76%, 93.78%, and 60.90%, respectively. Additionally, the anti-inflammatory effects of TGFs are evaluated in LPS-treated RAW 264.7 macrophages, and the result demonstrates that TGFs could significantly inhibit LPS-induced NO release in vitro in a dose-dependent manner compared with the control group. These findings suggest that TGFs could potentially be natural antioxidants and anti-inflammatory ingredients that could be used in pharmaceutical products and functional food additives.

The α-L-Rhamnosidase is an important enzyme with applications in the food and pharmaceutical industries because it can release terminal L-rhamnose residues from various natural products. In this study, the B-factor-saturation mutagenesis strategy was used to increase the thermostability of α-L-rhamnosidase from Aspergillus terreus. The D594Q and G827K/D594Q mutant enzymes were obtained by screening a series of mutants; they prolonged the half-life of the enzyme at 70 °C by 2.1-fold and 2.3-fold, respectively. Analysis of the 3D structure showed that in the thermostable variants the number of hydrogen bonds and salt bridges was increased, explaining the enhanced thermostability. Kinetic studies showed that the KM values for the D594Q and G827K/D594Q mutant enzymes decreased by 4.0% and 3.8%, respectively. Additionally, the kcat/KM values for the D594Q and G827K/D594Q mutant enzymes increased by 15.5% and 9.2%, respectively. Moreover, the D594Q and G827K/D594Q mutant enzymes exhibited markedly improved isoquercitrin yield at 70 °C that increased by 13.5% and 11.0%, respectively. Therefore, the D594Q and G827K/D594Q mutant enzymes are more suitable for the industrial processes of isoquercitrin preparation.

Berberine (BBR), isolated from a Chinese herb, is identified as a new cholesterol-lowering small molecule, and hundreds of berberine derivatives have been obtained for optimization of their hypolipidemic activities in recent years. However, so far there is no available quantitative structure-activity relationship (QSAR) model used for the development of novel BBR analogues with hypolipidemic activities, mainly due to lack of lipid-lowering molecular mechanisms and target identification of BBR. In this paper, the tactics using ligand efficiency indice instead of pIC50 as the activity could be adopted for the development of BBR QSAR models. A series of 59 BBR derivatives with hypolipidemic activities have been studied and split randomly into three sets of training and test sets. Statistical quality of most building models shows obviously robust. Best calculated model that employs LLE indice as the activity (Model 6) has the following statistical parameters: for training set R2 = .984, Q2 = 0.981, RMSE = 0.1160, and for test set R2 = .989, RMSE = 0.0067. This model would be used for the development of novel BBR analogues with lipid-lowering activities as a hit discovery tool.

Osmanthus fragrans are well-known for their fragrance, but it is wasteful if to discard O. fragrans flower after extracting their essential oils. In this paper, we found that O. fragrans flower residues were rich in flavonoids. Six flavonoids and one phenylethanoid glycoside were isolated from the ethanol extract of O. fragrans flower residues, identified as quercetin (1), rutin (2), verbascoside (3), genistin (4), kaempferol (5), isorhamnetin (6) and naringin (7). In bioactivity study, kaempferol (IC50 = 1.43 μg/mL) showed the best anti-inflammatory activity. Isorhamnetin, quercetin, kaempferol, verbascoside and rutin (the values of IC50 were 18.30, 11.05, 16.88, 20.21 and 22.76 μg/mL, respectively) showed excellent DPPH free radical scavenging activity. Verbascoside performed relatively well at inhibiting the growth of both CT26 colonic carcinoma cells (IC50 = 46.87 μg/mL) and HepG2 hepatocarcinoma cells (IC50 = 30.58 μg/mL). In addition, quercetin and kaempferol showed strong anti-proliferation activity against HepG2 cells.

In the fermentation progress, fermentation parameters including the feed rate, induction temperature, and induction pH evidently regulate the accumulation of acetic acid generated by recombinant E. coli in the medium. The production of thermostable β-glucosidase (Tpebgl3) was increased by optimizing the parameters mentioned step by step. The optimal conditions were obtained with the highest enzyme expression (560.4 U/mL) and the maximum DCW (65 g/L) at the pre-induction specific growth rate of 0.2 h−1 followed by a post-induction specific growth rate (0.18 h−1); induction temperature is 39 °C; the pH is 7.2; the concentration of acetic acid was maintained all along below 0.9 g/L. Results show it is necessary for the synthesis of Tpebgl3 to regulate the accumulation of acetic acid at the premise of feeding to meet the normal growth of E. coli. The production of Tpebgl3 by recombinant E. coli is the highest reported to date.

Background Thermally stable α-L-rhamnosidase with cleaving terminal α-L-rhamnose activity has great potential in industrial application. Therefore, it is necessary to find a proper method to improve the thermal stability of α-L-rhamnosidase. Results In this study, addition of sorbitol has been found to increase the thermostability of α-L-rhamnosidase from Aspergillus terreus at temperatures ranging from 65 °C to 80 °C. Half-life and activation free energy with addition of 2.0 M sorbitol at 70 °C were increased by 17.2-fold, 8.2 kJ/mol, respectively. The analyses of the results of fluorescence spectroscopy and CD have indicated that sorbitol helped to protect the tertiary and secondary structure of α-L-rhamnosidase. Moreover, the isoquercitrin yield increased from 60.01 to 96.43% with the addition of 1.5 M of sorbitol at 70 °C. Conclusion Our findings provide an effective approach for enhancing the thermostability of α-L-rhamnosidase from Aspergillus terreus, which makes it a good candidate for industrial processes of isoquercitrin preparation. Electronic supplementary material The online version of this article (doi:10.1186/s12896-017-0342-9) contains supplementary material, which is available to authorized users.