Search

Purpose of Review In the presented review, we have summarized recent achievements on the use of immobilized oxidoreductases for biodegradation of hazardous organic pollutants including mainly dyes, pharmaceuticals, phenols, and bisphenols. In order to facilitate process optimization and achievement of high removal rates, effect of various process conditions on biodegradation has been highlighted and discussed. Recent Findings Current reports clearly show that immobilized oxidoreductases are capable of efficient conversion of organic pollutants, usually reaching over 90% of removal rate. Further, immobilized enzymes showed great recyclability potential, allowing their reuse in numerous of catalytic cycles. Summary Collected data clearly indicates immobilized oxidoreductases as an efficient biocatalytic tools for removal of hazardous phenolic compounds, making them a promising option for future water purification. Data shows, however, that both immobilization and biodegradation conditions affect conversion efficiency; therefore, process optimization is required to achieve high removal rates. Nevertheless, we have demonstrated future trends and highlighted several issues that have to be solved in the near-future research, to facilitate large-scale application of the immobilized oxidoreductases in wastewater treatment.

The occurrence of emerging contaminants, such as estrogens, in secondary and tertiary treated effluents and in sewage-impacted water bodies is one of the major obstacles to the implementation of water reuse. This review critically evaluates the performance of emerging process of enzymatic degradation of estrogens, and its efficiency. The data collected from peer-review literature show that enzymes have been extensively applied (in both free and immobilized form) in estrogen removal. Amongst others, the use of laccase as a catalyst provides over 90% removal of estrogens. Immobilized enzymes can overcome some limitations of the free biocatalysts, including reusability. Research evidence points to the formation of by-products, such as dimers and trimers. Nevertheless, estrogenic activity assessment indicates a reduction in toxicity after enzyme treatment. The cost and stability of enzymes, as well as their performance in a real wastewater matrix, are the major obstacles to the implementation of enzymatic processes in wastewater treatment. Continued endeavors are required to enhance the successful application of enzymes in the wastewater treatment industry. Highlights: Processes of enzyme-supported conversion of estrogens are reviewed and discussed. Laccase is the most commonly applied enzyme and achieves over 90% estrogen removal. Immobilization is suggested as an effective tool for enhancement of estrogen removal. Dimers and trimers have been identified as main bioconversion products of estrogens. Existing research gaps are highlighted and future recommendations are provided.

Antimicrobial resistance (AMR) is a growing threat to human and animal health. Progress in molecular biology has revealed new and significant challenges for AMR mitigation given the immense diversity of antibiotic resistance genes (ARGs), the complexity of ARG transfer, and the broad range of omnipresent factors contributing to AMR. Municipal, hospital and abattoir wastewater are collected and treated in wastewater treatment plants (WWTPs), where the presence of diverse selection pressures together with a highly concentrated consortium of pathogenic/commensal microbes create favourable conditions for the transfer of ARGs and proliferation of antibiotic resistant bacteria (ARB). The rapid emergence of antibiotic resistant pathogens of clinical and veterinary significance over the past 80 years has re-defined the role of WWTPs as a focal point in the fight against AMR. By reviewing the occurrence of ARGs in wastewater and sludge and the current technologies used to quantify ARGs and identify ARB, this paper provides a research roadmap to address existing challenges in AMR control via wastewater treatment. Wastewater treatment is a double-edged sword that can act as either a pathway for AMR spread or as a barrier to reduce the environmental release of anthropogenic AMR. State of the art ARB identification technologies, such as metagenomic sequencing and fluorescence-activated cell sorting, have enriched ARG/ARB databases, unveiled keystone species in AMR networks, and improved the resolution of AMR dissemination models. Data and information provided in this review highlight significant knowledge gaps. These include inconsistencies in ARG reporting units, lack of ARG/ARB monitoring surrogates, lack of a standardised protocol for determining ARG removal via wastewater treatments, and the inability to support appropriate risk assessment. This is due to a lack of standard monitoring targets and agreed threshold values, and paucity of information on the ARG-pathogen host relationship and risk management. These research gaps need to be addressed and re-search findings need to be transformed into practical guidance for WWTP operators to enable effective progress towards mitigating the evolution and spread of AMR. Refereed/Peer-reviewed

© 2019 The Royal Society of Chemistry. A hybrid process combining a single compartment aerobic membrane bioreactor (MBR) and a membrane microalgal reactor (MMR) was evaluated for nutrient removal and microalgal biomass production. When operated without biomass extraction, the microalgal biomass in the MMR reached 920 mg L-1 on day 18 and then collapsed, rendering nutrient removal ineffective. Stable operation of the MMR was achieved by regular biomass extraction (i.e. 1/30 of the microalgal biomass in the reactor daily). The biomass production at steady state was approximately 26 g m-3 d-1. The NO3- and PO43- uptake values by microalgae were 4.0 ± 1.1 and 1.5 ± 0.9 g m-3 d-1, respectively. A facile flocculation and separation technique capable of recovering 98% microalgal biomass was demonstrated. Although the hybrid process can significantly enhance nutrient removal and biomass production, further research is needed to intensify the microalgal growth rate. At the current microalgal growth rate, a large MMR volume (37 times that of the MBR) is necessary for synchronous operation.

© 2019 Elsevier Ltd This study investigated the impact of mixing on key factors including foaming, substrate stratification, methane production and microbial community in three full scale anaerobic digesters. Digester foaming was observed at one plant that co-digested sewage sludge and food waste, and was operated without mixing. The lack of mixing led to uneven distribution of total chemical oxygen demand (tCOD) and volatile solid (VS) as well as methane production within the digester. 16S rRNA gene-based community analysis clearly differentiated the microbial community from the top and bottom. By contrast, foaming and substrate stratification were not observed at the other two plants with internal circulation mixing. The abundance of methanogens (Methanomicrobia) at the top was about four times higher than at the bottom, correlating to much higher methane production from the top verified by ex-situ biomethane assay, causing foaming. This result is consistent with foaming potential assessment of digestate samples from the digester.

Chlorhexidine (CHX) is a broad-spectrum antimicrobial, which may pose environmental health risks. This study examined the removal potential and the mechanisms regulating the fate of CHX in activated sludge (AS). Bioreactors inoculated with AS removed 74 ± 8% and 81 ± 6% of CHX at steady state while receiving 0.5 and 1 mg/L CHX, respectively. Analysis of the removal pathways showed that biosorption, rather than biological breakdown or other abiotic losses, largely (>70%) regulated the removal of CHX. 16S rRNA gene-based analysis revealed that CHX selected for Luteolibacter (4.3-10.1-fold change) and Runella (6.2-14.1-fold change) with potential multi-drug resistance mechanisms (e.g., efflux pumps). In contrast, it significantly reduced core members (Comamonadaceae and Flavobacteriaceae) of AS, playing a key role in contaminant removal and floc formation directly associated with the performance of WWTPs (e.g., wastewater effluent quality). Antimicrobial susceptibility testing showed that 0.4-1.3 mg/L of CHX can be sublethal to AS. Our work provided new insights into the fate of CHX in urban waste streams and the potential toxicity and effects on the structure and function of AS, which has practical implications for the management of biological WWTPs treating CHX. This work was supported by a grant from the National Research Foundation of Korea (NRF) funded by the Korea government (MSIP; Ministry of Science, ICT & Future Planning) (No. NRF-2017R1C1B5076367).

© 2018 Elsevier B.V. This study evaluated the removal of diclofenac (DCF) in activated sludge and its long-term exposure effects on the function and structure of the microbial community. Activated sludge could remove

© 2019 This study investigated changes in microbial community structure and composition in response to operational disturbance and subsequent process recovery by inoculum addition. Amplicon sequencing of 16S rRNA and mcrA marker genes on the Illumina Miseq platform was used for microbial community analysis. The results show that imbalance among core microbial groups caused volatile fatty acid accumulation and subsequent deteriorated biogas production (decreased by 45% of daily volume) and methane content (57% of the total abundance) and reduction of acetogenic and methanogenic microbes (they accounted for

This study demonstrates the proof-of-concept of biogas sparging to control membrane fouling during sludge centrate pre-concentration by forward osmosis (FO). Sludge centrate sparging by biogas reduced membrane fouling (measured by water flux decline) and filtration time by two and eight times, respectively, compared to FO operation without biogas sparging at the same water recovery of 60%. In addition, the water flux was almost fully recovered by physical flushing when biogas sparging was applied. Biogas sparging also resulted in a significant improvement in the enrichment of organic, ammonia, and phosphate to close to the theoretical value based on mass balance calculation. In other words, organic matter and nutrients were retained in the bulk solution for subsequent recovery. Fouling mitigation and nutrient enrichment improvement by biogas sparging could be attributed to carbonate buffering to maintain a near neutral pH for preventing calcium phosphate precipitation on the membrane surface and ammonia volatilisation.

This study addresses the challenge of microalgae harvesting through the development of flocculants. Two positively charged cationic polymers including poly[2 (acryloyloxy)ethyl]trimethylammonium chloride (PAETAC) and poly(3 acrylamidopropyl)trimethylammonium chloride (PAmPTAC) were synthesized using the UV-induced radical polymerization, for harvesting both freshwater and marine microalgae. The results show that the synthesized polymers have excellent flocculation performance for both freshwater green microalgae (Chlorella vulgaris) and marine red microalgae (Porphyridium purpureum). PAETAC outperformed PAmPTAC for both Chlorella vulgaris and Porphyridium purpureum microalgae. The optimal PAETAC doses for Chlorella vulgaris and Porphyridium purpureum microalgae were 50 and 4.8 mg/g of dry biomass while the optimal PAmPTAC doses were 252 and 35 mg/g of dry biomass respectively. Additionally, the floc formation with the PAETAC was more stable than PAmPTAC, which supported the dewatering step via sieving. The superior performance can be attributed to the higher molecular weight of the PAETAC polymer when compared to the PAmPTAC polymer. In comparison to commercially available polydiallyldimethylammonium chloride (PolyDADMAC), the newly synthesised PAETAC and PAmPTAC polymers demonstrated superior flocculation efficiency at a lower dose. The findings of this study established a platform technology for designing and synthesising cationic flocculants for use in microalgae harvesting.

Anaerobic co-digestion (AcoD) can utilise spare digestion capacity at existing wastewater treatment plants (WWTP) to generate surplus biogas beyond the plant's internal energy requirement. Data from industry reports and the peer-reviewed literature show that through AcoD, numerous examples of WWTPs have become net energy producers, necessitating other high-value applications for surplus biogas. A globally emerging trend is to upgrade biogas to biomethane, which can then be used as town gas or transport fuel. Water, organic solvent and chemical scrubbing, pressure swing adsorption, membrane separation, and cryogenic technology are commercially available CO2 removal technologies for biogas upgrade. Although water scrubbing is currently the most widely applied technology due to low capital and operation cost, significant market growth in membrane separation has been seen over the 2015-2019 period. Further progress in materials engineering and sciences is expected and will further enhance the membrane separation competitiveness for biogas upgrading. Several emerging biotechnologies to i) improve biogas quality from AcoD; ii) accelerate the absorption rate, and iii) captures CO2 in microalgal culture have also been examined and discussed in this review. Through a combination of AcoD and biogas upgrade, more WWTPs are expected to become net energy producers.

Flocculation is a low-cost harvesting technique for microalgae biomass production, but flocculation efficiency is species dependent. In this study, we investigated the efficacy of two synthetic (polyacrylamide) and one natural (chitosan) flocculants against three algal species: the cyanobacterium Synechocystis sp., the freshwater Chlorella vulgaris, and the marine Phaeodactylum tricornutum at laboratory and pilot scales to evaluate harvesting efficiency, biomass integrity and media recycling. Growth phase affected the harvesting efficiency of the eukaryotic microalgae. The flocculation was optimal at stationary phase with high flocculation efficiency achieved using polyacrylamides at 24–36 mg/g dry weight. The effect of the flocculants on the harvested biomass was investigated. The flocculated Synechocystis sp. showed a higher proportion of compromised cells compared to C. vulgaris and P. tricornutum likely due to differences in cell walls composition. Compromised cells could lead to the release of valuable products into the surrounding growth media during flocculation. The residual culture media was recycled once with no impact on cell growth for all treatments and algal species. The flocculation technique was demonstrated at pilot-scale using 350 L microalgal suspension, showing an efficiency of 82–90% at a polyacrylamide dosage of 6.5–10 mg/L. This efficiency and the biomass quality are comparable to the laboratory-scale results. Overall, results indicate that polyacrylamide flocculants work on a wide range of species without the need for pre-treatment. The information generated in this study can contribute to making the microalgae industry more competitive.

This study evaluates the feasibility of a novel rumen membrane bioreactor (rumen MBR) to produce volatile fatty acids (VFA) from crop residues (i.e. lignocellulosic biomass). Rumen MBR can provide a sustainable route for VFA production by mimicking the digestive system of ruminant animals. Rumen fluid was inoculated in a reactor coupled with ultrafiltration (UF) membrane and fed with maize silage and concentrate feed at 60:40% (w/w). Continuous VFA production was achieved at an average daily yield of 438 mg VFA/g substrate. The most abundant VFA were acetic (40–80%) and propionic (10–40%) acids. The majority (73 ± 15%) of produced VFA was transferred through the UF membrane. Shifts in dominant rumen microbes were observed upon the transition from in vivo to in vitro environment and during reactor operation, however, stable VFA yield was maintained for 35 days, providing the first proof-of-concept of a viable rumen MBR.

An effective pretreatment is the first step to enhance the digestibility of lignocellulosic biomass – a source of renewable, eco-friendly and energy-dense materials – for biofuel and biochemical productions. This review aims to provide a comprehensive assessment on the advantages and disadvantages of lignocellulosic pretreatment techniques, which have been studied at the lab-, pilot- and full-scale levels. Biological pretreatment is environmentally friendly but time consuming (i.e. 15–40 days). Chemical pretreatment is effective in breaking down lignocellulose and increasing sugar yield (e.g. 4 to 10-fold improvement) but entails chemical cost and expensive reactors. Whereas the combination of physical and chemical (i.e. physicochemical) pretreatment is energy intensive (e.g. energy production can only compensate 80% of the input energy) despite offering good process efficiency (i.e. > 100% increase in product yield). Demonstrations of pretreatment techniques (e.g. acid, alkaline, and hydrothermal) in pilot-scale have reported 50–80% hemicellulose solubilisation and enhanced sugar yields. The feasibility of these pilot and full-scale plants has been supported by government subsidies to encourage biofuel consumption (e.g. tax credits and mandates). Due to the variability in their mechanisms and characteristics, no superior pretreatment has been identified. The main challenge lies in the capability to achieve a positive energy balance and great economic viability with minimal environmental impacts i.e. the energy or product output significantly surpasses the energy and monetary input. Enhancement of the current pretreatment techno-economic efficiency (e.g. higher product yield, chemical recycling, and by-products conversion to increase environmental sustainability) and the integration of pretreatment methods to effectively treat a range of biomass will be the steppingstone for commercial lignocellulosic biorefineries.

A proof of concept of using steel-making slag to upgrade biogas to biomethane is demonstrated in this study. Biogas is generated from the anaerobic co-digestion of sewage sludge and beverage waste. The CO2 capture capacity of an alkaline liquor derived from the release of calcium from the steel-making slag is comparable to that of the commercial adsorbent monoethanolamine. Although only 5% of Ca in the steel-making slag was released to the alkaline liquor, 1 ton of steel-making slag could be capable of upgrading 10 m3 of biogas to over 90% methane content. The results also show that pH can be used as a surrogate parameter to monitor and control biogas upgrading. Further research to improve the release of calcium is essential for the acceleration of the weathering process of steel-making slag for subsequent construction applications.

Laccase enzyme from white-rot fungi is a potential biocatalyst for the oxidation of emerging contaminants (ECs), such as pesticides, pharmaceuticals and steroid hormones. This study aims to develop a three-step platform to treat ECs: (i) enzyme production, (ii) enzyme concentration and (iii) enzyme application. In the first step, solid culture and liquid culture were compared. The solid culture produced significantly more laccase than the liquid culture (447 vs. 74 &micro, M/min after eight days), demonstrating that white rot fungi thrived on a solid medium. In the second step, the enzyme was concentrated 6.6 times using an ultrafiltration (UF) process, resulting in laccase activity of 2980 &micro, M/min. No enzymatic loss due to filtration and membrane adsorption was observed, suggesting the feasibility of the UF membrane for enzyme concentration. In the third step, concentrated crude enzyme was applied in an enzymatic membrane reactor (EMR) to remove a diverse set of ECs (31 compounds in six groups). The EMR effectively removed of steroid hormones, phytoestrogen, ultraviolet (UV) filters and industrial chemical (above 90%). However, it had low removal of pesticides and pharmaceuticals.

This study examined the removal and enantio-specific fate of a suite of eleven chiral 2-arylpropionic acids (2-APAs) during biological wastewater treatment simulated in a laboratory-scale membrane bioreactor (MBR). Using pure (R)- and (S)- enantiomers in the MBR influent, chiral inversion was determined through the increase in the concentration of the non-dominant enantiomer and changes in the enantiomeric fraction (EF) between the two enantiomers during the treatment process. Effective (> 90%) and similar removal rates between (R)- and (S)- enantiomers were confirmed for eight 2-APAs. In this study, 2-APAs exhibited diverse and distinctive chiral inversion behaviours: two 2-APAs showed (R→S) unidirectional inversion, three 2-APAs showed (S→R) unidirectional inversion, and six 2-APAs showed bidirectional inversion. This is the first study to report chiral inversion behaviours of a comprehensive suite of 2-APAs with a variety of functional groups substituted onto the aryl ring. A decrease in effluent EF over time was observed for two 2-APAs. This study shows that chiral inversion of 2-APAs varies significantly from compound to compound, despite the high similarity in their chemical structures.

This study examines the changes in microbial community diversity and structure in response to anaerobic co-digestion (AcoD) between sewage sludge and a carbon-rich organic waste. Biomass samples were collected at different carbon-rich co-substrate mixing ratios to cover a large range of organic loading rate (OLR) for microbial community analysis by amplicon sequencing of 16S rRNA and mcrA marker genes on the Illumina Miseq platform. The results show a reduction in community diversity (i.e. richness and evenness) and a shift in community structure as the OLR increased due to the addition of the carbon-rich co-substrate. Despite the decrease in community diversity, biogas production increased proportionally to the increase in OLR of up to 3.03 kg COD per m3 per day (corresponding to 171% OLR increase compared to anaerobic digestion of only sewage sludge). Further OLR increase led to the collapse of biogas production as well as significant reduction in both the microbial diversity and methanogenic population. The methanogenic community was more sensitive to the increase in OLR compared to hydrolytic and fermentative bacteria. These results show that there is an OLR threshold at which the function and resilience of the anaerobic ecosystem could be maintained. Beyond this threshold, the enrichment of hydrolytic and fermentative bacteria, as well as inhibition of methanogenic community, can cause anaerobic digestion failure.

A novel membrane distillation – enzymatic membrane bioreactor (MD-EMBR) system was developed for efficient degradation of trace organic contaminants (TrOCs). Degradation of five TrOCs, namely carbamazepine, oxybenzone, diclofenac, atrazine and sulfamethoxazole was examined using two commercially available laccases (from Trametes versicolor and Aspergillus oryzae ). The MD system ensured complete retention (>99%) of both enzyme and TrOCs. Of particular interest was that the complete retention of the TrOCs resulted in high TrOC degradation by both laccases. Oxybenzone and diclofenac degradation in the MD-EMBR ranged between 80 and 99%. Compared to previously developed EMBRs, as much as 40% improvement in the removal of resistant non-phenolic TrOCs ( e.g., carbamazepine) was observed. Laccase from A. oryzae demonstrated better TrOC degradation and enzymatic stability. With the addition of redox mediators, namely 1-hydroxybenzotriazole (HBT) or violuric acid (VA), TrOC degradation was improved by 10–20%. This is the first demonstration of a laccase-based high retention membrane bioreactor for enhanced biodegradation of TrOCs.

Enzymatic treatment can effectively degrade recalcitrant micro-pollutants in wastewater. However, its industrial application is constrained by the high cost of the purified enzyme preparations. This work introduces a novel technique to directly immobilize the in-house crude enzyme extracts (from P. ostreatus ) onto the functionalized TiO 2 nanoparticle surface. Comprehensive investigations were carried out to understand the interactions between complex crude enzyme extracts and the immobilization support. By simple dilution of the crude enzyme extract, the immobilization efficiency can be significantly improved. The resultant biocatalytic nanoparticles had comparable performance to the immobilized purified commercial enzymes. Finally, the micropollutant degradation capability of the biocatalytic nanoparticles was demonstrated with two micro-pollutants, namely, bisphenol-A and carbamazepine, commonly detected in sewage. The efficient laccase extraction and immobilization on biocatalytic nanoparticles show great promise as a cost-effective alternative to conventional wastewater treatment processes for recalcitrant micro-pollutants.

High concentrations of antibiotics in swine wastewater pose potentially serious risks to the environment, human and animal health. Identifying the mechanism for removing antibiotics during the anaerobic treatment of swine wastewater is essential for reducing the serious damage they do to the environment. In this study, batch experiments were conducted to investigate the biosorption and biodegradation of tetracycline and sulfonamide antibiotics (TCs and SMs) in anaerobic processes. Results indicated that the removal of TCs in the anaerobic reactor contributed to biosorption, while biodegradation was responsible for the SMs' removal. The adsorption of TCs fitted well with the pseudo-second kinetic mode and the Freundlich isotherm, which suggested a heterogeneous chemisorption process. Cometabolism was the main mechanism for the biodegradation of SMs and the process fitted well with the first-order kinetic model. Microbial activity in the anaerobic sludge might be curtailed due to the presence of high concentrations of SMs.

© 2019 Elsevier B.V. A simple, efficient, and fast settling flocculation technique to harvest microalgal biomass was demonstrated using a proprietary cationic polyacrylamide flocculant for a freshwater (Chlorella vulgaris) and a marine (Phaeodactylum tricornutum) microalgal culture at their mid-stationary growth phase. The optimal flocculant doses were 18.9 and 13.7 mg/g of dry algal biomass for C. vulgaris and P. tricornutum, respectively (equivalent to 7 g per m3 of algal culture for both species). The obtained optimal dose was well corroborated with changes in cell surface charge, and culture solution optical density and turbidity. At the optimal dose, charge neutralization of 64 and 86% was observed for C. vulgaris and P. tricornutum algal cells, respectively. Algae recovery was independent of the culture solution pH in the range of pH 6 to 9. Algal biomass recovery was achieved of 100 and 90% for C vulgaris and P. tricornutum respectively, and over 98% medium recovery was achievable by simple decanting.

© 2019 Elsevier B.V. Recent developed sequencing techniques have resulted in a new and unprecedented way to study biological wastewater treatment, in which most organisms are uncultivable. This review provides (i) an insight on state-of-the-art sequencing techniques and their limitations; (ii) a critical assessment of the microbial community in biological reactor and biofouling layer in a membrane bioreactor (MBR). The data from high-throughput sequencing has been used to infer microbial growth conditions and metabolisms of microorganisms present in MBRs at the time of sampling. These data shed new insight to two fundamental questions about a microbial community in the MBR process namely the microbial composition (who are they?) and the functions of each specific microbial assemblage (what are their function?). The results to date also highlight the complexity of the microbial community growing on MBRs. Environmental conditions are dynamic and diverse, and can influence the diversity and structural dynamics of any given microbial community for wastewater treatment. The benefits of understanding the structure of microbial communities on three major aspects of the MBR process (i.e. nutrient removal, biofouling control, and micropollutant removal) were symmetrically delineated. This review also indicates that the deployment of microbial community analysis for a practical engineering context, in terms of process design and system optimization, can be further realized.

© 2019 Elsevier Ltd This study investigated the production of biogas, volatile fatty acids (VFAs), and other soluble organic from lignocellulosic biomass by two microbial communities (i.e. rumen fluid and anaerobic sludge). Four types of abundant lignocellulosic biomass (i.e. wheat straw, oaten hay, lurence hay and corn silage)found in Australia were used. The results show that rumen microbes produced four-time higher VFAs level than that of anaerobic sludge reactors, indicating the possible application of rumen microorganism for VFAs generation from lignocellulosic biomass. VFA production in the rumen fluid reactors was probably due to the presence of specific hydrolytic and acidogenic bacteria (e.g. Fibrobacter and Prevotella). VFA production corroborated from the observation of pH drop in the rumen fluid reactors indicated hydrolytic and acidogenic inhibition, suggesting the continuous extraction of VFAs from the reactor. Anaerobic sludge reactors on the other hand, produced more biogas than that of rumen fluid reactors. This observation was consistent with the abundance of methanogens in anaerobic sludge inoculum (3.98% of total microbes)compared to rumen fluid (0.11%). VFA production from lignocellulosic biomass is the building block chemical for bioplastic, biohydrogen and biofuel. The results from this study provide important foundation for the development of engineered systems to generate VFAs from lignocellulosic biomass.

© 2019 Elsevier Ltd Activated sludge (AS) and return activated sludge (RAS) microbial communities from three full-scale municipal wastewater treatment plants (denoted plant A, B and C) were compared to assess the impact of sludge settling (i.e. gravity thickening in the clarifier) and profile microorganisms responsible for nutrient removal and reactor foaming. The results show that all three plants were dominated with microbes in the phyla of Proteobacteria, Bacteroidetes, Verrucomicrobia, Actinobacteria, Chloroflexi, Firmicutes, Nitrospirae, Spirochaetae, Acidobacteria and Saccharibacteria. AS and RAS shared above 80% similarity in the microbial community composition, indicating that sludge thickening does not significantly alter the microbial composition. Autotrophic and heterotrophic nitrifiers were present in the AS. However, the abundance of autotrophic nitrifiers was significantly lower than that of the heterotrophic nitrifiers. Thus, ammonium removal at these plants was achieved mostly by heterotrophic nitrification. Microbes that can cause foaming were at 3.2% abundance, and this result is well corroborated with occasional aerobic biological reactor foaming. By contrast, these microbes were not abundant (

This study compares the effectiveness of seven redox-mediating compounds namely, 1-hydrozybenzotriazole (HBT), N-hydroxyphthalimide (HPI), 2,2,6,6-Tetramethyl-1-piperidinyloxy (TEMPO), violuric acid (VA), syringaldehyde (SA), vanillin (VA), and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), which follow distinct oxidation pathways, for the degradation of trace organic contaminants (TrOCs). These redox-mediators were investigated for improved degradation of four TrOCs showing resistance to degradation by crude laccase from the white-rot fungus Pleurotus ostreatus. ABTS and VA achieved the highest degradation of the phenolic compounds (i.e., oxybenzone and pentachlorophenol), whereas the non-phenolic compounds (i.e., naproxen and atrazine) were best removed using VA or HBT. This implies that the non-phenolic compounds are more effectively removed by the radical species generated by the [Formula presented] type mediators (i.e., VA and HBT), while removal of the phenolic compounds may depend more on the stability and the redox potential of the radicals generated from the mediator, irrespective of the type. Notably, enzyme stability was greatly affected by the [Formula presented] type mediators but it was compensated by their rapid degradation capacity. Overall, VA and HBT ([Formula presented] type) appear to be the best mediators for enhanced degradation of the selected compounds without causing significant toxicity in the effluent.

This study aims to examine the flocculation efficiency of Porphyridium purpureum (i.e. a red marine microalga with high content of pigments and fatty acids) grown in seawater medium using polyacrylamide polymers and alkaline flocculation. Polymers Flopam™ and FO3801 achieved the highest flocculation efficiency of over 99% at the optimal dose of 21 mg per g of dry biomass through charge neutralisation and bridging mechanism. The addition of sodium hydroxide, potassium hydroxide, and sodium carbonate also achieved flocculation efficiency of 98 and 91%, respectively, but high doses were required (i.e. > 500 mg per g of dry biomass). Calcium hydroxide was not as effective and could only achieve 75% flocculation efficiency. Precipitation of magnesium hydroxide was identified as the major cause of hydroxide-induced flocculation. On the other hand, sodium carbonate addition induced flocculation via both magnesium and calcium carbonate co-precipitation. The large mass of precipitates caused a sweeping effect and enmeshed the microalgal cells to trigger sedimentation. Cell membrane integrity analysis of flocculated P. purpureum indicated that polyacrylamide polymers led to significant compromised cells (i.e. 96%), compared to the alkaline bases (70–96% compromised cells). These results appear to be the first to demonstrate the high efficiency of polyacrylamide polymer and alkaline flocculation of P. purpureum but at the expense of the biomass quality.

Electrospun materials, due to the possibility of design of their properties, are suitable as supports for enzyme immobilization. Produced biocatalytic systems might be then apply in various biocatalytic reactions, including conversion of pollutants. In our study, electrospun fibers made from nylon 6 was produced, modified and applied as a support for laccase immobilization by adsorption and covalent binding. The systems with immobilized laccase were used in decolorization process of selected dyes, azo dye Reactive Black 5 and the anthraquinone dye Reactive Blue 4. It was found that at from dye solution at concentration 1 mg/L at pH 5, temperature 25 °C, after 24 h of process the efficiency of decolorization of Reactive Blue 4 and Reactive Black 5 reached 77% and 63%, respectively. The storage stability studies showed that after 30 days of storage, the relative activities were 60% and 95% for adsorbed and covalently bonded oxidoreductase respectively. Moreover, after 10 consecutive catalytic cycles adsorbed and covalently bonded laccase retained over 60% and 70% respectively, indicating the possibility of application of the obtained systems on a larger scale for removal of phenolic pollutants from wastewaters.

Water contamination by cadmium (Cd), which is a toxic heavy metal widely used in many industrial processes, is a pervasive environmental problem. This study investigated the removal of Cd by dry cyanobacterium Aphanothece sp cultivar in adsorption columns The effect of inlet Cd concentrations (1.00 – 4.85mg/L), flow rates (0.30-0.60 L/h) and bed height (4.6 -7.2 cm) on the breakthrough characteristics of the adsorption column was investigated. The maximum adsorption capacity and efficiency were found to be 8.20 mg/g and 89.07 %, respectively with a flow rate of 0.60 L/h and 4.85 mg/L inlet concentration of Cd. The fixed bed adsorption data were fitted to three well known fixed bed empirical models namely Thomas, Adam–Bohart and Yoon–Nelson. The experimental results well fitted with the models mentioned above with R2 of greater than 0.98 at different conditions. The regeneration efficiency of benthic cyanobacterium Aphanothece sp cultivar based adsorbent was studied using 0.1 M HCl. Repetitive adsorption–regeneration experiment show that, at the end of the fifth cycle, the desorption efficiency decreased by 21%. Thus, further research is necessary to improve the reusability of dried biomass of cyanobacterium Aphanothece sp adsorbent.

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are contaminants of great concern due to their wide-spread occurrence and persistence in the environments (i.e., in water, soil and sediment) and potential toxicology even at very low concentration. The main focus of this review is on the PFASs in soil and sediments. More specifically, this review systematically examines the occurrence and toxicological effects with associated risks, fate (i.e., PFASs adsorption by soil and sediment, transportation and transformation, and bioaccumulation), and remediation practices of PFASs in soil and sediment. Various models and equations such as fugacity-based multimedia fate and hydrodynamic models are used to study the fate, transport, and transformation of PFASs. Among different remediation practices, sorption is the dominant process for the removal of PFASs from soil and sediments. Results also indicate that PFASs adsorption onto activated carbon decrease with the increase of carbon chain length in the PFASs. The longer-chain PFASs have larger partition coefficient values than shorter-chained PFASs. Sorption of PFASs to soil and sediments are mainly governed by different electrostatic interactions, hydrogen bonds formation, hydrophobic interactions, organic content in soil and sediments, and ligand exchange. Other technology such as thermal treatment might be potential in the removal of PAFSs, but need further study to elucidate a conclusion. Finally, the associated challenges and future outlook have been included.

In the concept of a circular economy, wastewater is no longer waste but a resource for water, energy and nutrients. In this study, a hybrid system containing an anaerobic membrane bioreactor (AnMBR) and a microalgal membrane reactor (MMR) was developed to harvest energy, nutrients, and microalgal biomass from food and agribusiness industrial wastewater. The AnMBR removed over 97% of chemical oxygen demand (COD) and generated 4.7 ± 0.15 L (n=80) of biogas equivalent to 2.4 kWh kg−1 COD (feed) d−1. Through anaerobic metabolism, the microorganism in AnMBR generated NH 4 + and PO 4 3 − -rich effluent. Their effluent concentrations were 1.9 and 1.4 times of that in the influent, respectively. NH 4 + and PO 4 3 − -rich effluent was directly used (i.e. without filtration or sterilization) to culture microalgae Chlorella vulgaris in the MMR. . Microalgal biomass production reached up to 700 mg/L after 6 days of operation and nutrient removal rates of above 75% were achieved. However, biomass production and nutrient removal declined towards the end of experiment. The generated biomass was completely harvested using cationic polyacrylamide at the dose of 36 mg g−1 dry weight. Overall, the AnMBR has great potential to produce energy. Future research is needed to intensify the microalgal growth (e.g. genetic modification of strains, addition of plant hormones) in the MMR for continuous operation of the hybrid system.

© 2019, Springer Nature B.V. This study investigated the effects and fate of the antibiotic ciprofloxacin (CIP) at environmentally relevant levels (50–500 µg/L) in activated sludge (AS) microbial communities under aerobic conditions. Exposure to 500 µg/L of CIP decreased species diversity by about 20% and significantly altered the phylogenetic structure of AS communities compared to those of control communities (no CIP exposure), while there were no significant changes upon exposure to 50 µg/L of CIP. Analysis of community composition revealed that exposure to 500 µg/L of CIP significantly reduced the relative abundance of Rhodobacteraceae and Nakamurellaceae by more than tenfold. These species frequently occur in AS communities across many full-scale wastewater treatment plants and are involved in key ecosystem functions (i.e., organic matter and nitrogen removal). Our analyses showed that 50–500 µg/L CIP was poorly removed in AS (about 20% removal), implying that the majority of CIP from AS processes may be released with either their effluents or waste sludge. We therefore strongly recommend further research on CIP residuals and/or post-treatment processes (e.g., anaerobic digestion) for waste streams that may cause ecological risks in receiving water bodies.

© 2018 Elsevier Ltd This study evaluated short- and long-term exposure of activated sludge (AS) microbiome to cetylpyridinium chloride (CPC), a quaternary ammonium compound widely used as biocidal additive or cationic surfactant. Toxicity assay in batch mode showed that CPC (50 μg L−1) inhibited cell growth. However, in a continuous reactor, CPC concentration in the range of 50–500 μg L−1 did not result in any observable impact on the biological activities of the AS microbiome. Similarly, 16S rRNA gene-based community profiling revealed that CPC had no observable impact on microbial diversity. At the phylogenetic structure, Rhodobacter (15 ± 7% of the total) and Asticcacaulis (9 ± 3%) were the only two phyla with increasing population in the 500 μg L−1-exposed reactors. This was also supported by an observation of no major change in the community structure. The reactors could remove >60% of CPC at initial concentrations of 50–500 μg L−1, primarily by adsorption and biodegradation. The enrichment of Rhodobacter and Asticcacaulis genus might contribute to CPC biodegradation and emerge as a potential microbial niche for the removal of CPC.

© 2018 Elsevier Ltd Ciprofloxacin (CIP) is an antibiotic that is widely used to treat bacterial infections and is poorly biodegraded during wastewater treatment. In this study, a CIP-degrading bacterial strain (GLC_01) was successfully retrieved from activated sludge by enrichment and isolation. The obtained bacterial strain shares over 99% nucleotide identity of the 16S rRNA gene with Bradyrhizobium spp. Results show that Bradyrhizobium sp. GLC_01 degraded CIP via cometabolism with another carbon substrate following a first-order kinetics degradation reaction. CIP degradation by Bradyrhizobium sp. GLC_01 increased when the concentration of the primary carbon source increased. The biodegradability of the primary carbon source also affected CIP degradation. The use of glucose and sodium acetate (i.e. readily biodegradable), respectively, as a primary carbon source enhanced CIP biotransformation, compared to starch (i.e. relatively slowly biodegradable). CIP degradation decreased with the increase of the initial CIP concentration. Over 70% CIP biotransformation was achieved at 0.05 mg L−1 whereas CIP degradation decreased to 26% at 10 mg L−1. The phylogenetic identification and experimental verification of this CIP-degrading bacterium can lead to a bioengineering approach to manage antibiotics and possibly other persistent organic contaminants during wastewater treatment.

Redox-mediators such as syringaldehyde (SA) can improve laccase-catalyzed degradation of trace organic contaminants (TrOCs) but may increase effluent toxicity. The degradation performance of 14 phenolic and 17 non-phenolic TrOCs by a continuous flow enzymatic membrane reactor (EMR) at different TrOC and SA loadings was assessed. A specific emphasis was placed on the investigation of the toxicity of the enzyme (laccase), SA, TrOCs and the treated effluent. Batch tests demonstrated significant individual and interactive toxicity of the laccase and SA preparations. Reduced removal of resistant TrOCs by the EMR was observed for dosages over 50 μg/L. SA addition at a concentration of 10 μM significantly improved TrOC removal, but no removal improvement was observed at the elevated SA concentrations of 50 and 100 μM. The treated effluent showed significant toxicity at SA concentrations beyond 10 μM, providing further evidence that higher dosage of SA must be avoided.

This study demonstrates continuous enantiomeric inversion and further biotransformation of chiral profens including ibuprofen, naproxen and ketoprofen by an enzymatic membrane bioreactor (EMBR). The EMBR dosed with laccase showed non-enantioselective transformations, with high and consistent transformation of both ( R )- and ( S )-ibuprofen (93 ± 6%, n = 10 ), but lower removals of both enantiomers of naproxen (46 ± 16%, n = 10 ) and ketoprofen (48 ± 17%, n = 10 ). Enantiomeric analysis revealed a bidirectional but uneven inversion of the profens, for example 14% inversion of ( R )- to ( S )- compared to 4% from ( S )- to ( R )-naproxen. With redox-mediator addition, the enzymatic chiral inversion of both ( R )-/( S )-profens remained unchanged, although the overall conversion became enantioselective: except for ( S )-naproxen, the addition of redox mediator promoted the degradation of ( R )-profens only.

© 2017, © 2017 Informa UK Limited, trading as Taylor & Francis Group. This study investigated the influence of inorganic salts on enzymatic activity and the removal of trace organic contaminants (TrOCs) by crude laccase from the white-rot fungus Pleurotus ostreatus. A systematic analysis of 15 cations and anions from common inorganic salts was presented. Laccase activity was not inhibited by monovalent cations (i.e. Na + , NH 4+ , K + ), while the presence of divalent and trivalent cations showed variable impact–from negligible to complete inhibition–of both laccase activity and its TrOC removal performance. Of interest was the observation of discrepancy between residual laccase activity and TrOC removal in the presence of some ions. Mg 2+ had negligible impact on residual laccase activity but significant impact on TrOC removal. Conversely, F − showed greater impact on residual laccase activity than on TrOC removal. This observation indicated different impacts of the interfering ions on the interaction between laccase and TrOCs as compared to that between laccase and the reagent used to measure its activity, implicating that residual laccase activity may not always be an accurate indicator of TrOC removal. The degree of impact of halides was in the order of F − > I − > Br − > Cl − . Particularly, the tolerance of the tested laccase to Cl − has important implications for a range of industrial applications.

This chapter discusses advanced technologies for the removal of emerging trace organic contaminants (TrOCs) from wastewater for reuse purposes. In particular, integrated membrane processes for TrOC removal are delineated. In the environment, TrOCs may be present as a mixture of various compounds and their transformation products. Mixtures of TrOCs may impose a more complicated effect when compared to that of a single compound. Water recycling is a pragmatic approach to mitigate or solve the problems of water supply. There is a growing interest in using nontraditional water resources by means of water reclamation and water recycling for long-term sustainability. This chapter explains the removal of TrOCs by existing and advanced treatment processes. Some of the processes include activated carbon adsorption, high-pressure membrane filtration, advanced oxidation processes, and enzymatic degradation. The biomass feature is an important factor for TrOC removal in membrane bioreactor (MBR).

Laccase was immobilized on granular activated carbon (GAC) and the resulting GAC-bound laccase was used to degrade four micropollutants in a packed-bed column. Compared to the free enzyme, the immobilized laccase showed high residual activities over a broad range of pH and temperature. The GAC-bound laccase efficiently removed four micropollutants, namely, sulfamethoxazole, carbamazepine, diclofenac and bisphenol A, commonly detected in raw wastewater and wastewater-impacted water sources. Mass balance analysis showed that these micropollutants were enzymatically degraded following adsorption onto GAC. Higher degradation efficiency of micropollutants by the immobilized compared to free laccase was possibly due to better electron transfer between laccase and substrate molecules once they have adsorbed onto the GAC surface. Results here highlight the complementary effects of adsorption and enzymatic degradation on micropollutant removal by GAC-bound laccase. Indeed laccase-immobilized GAC outperformed regular GAC during continuous operation of packed-bed columns over two months (a throughput of 12,000 bed volumes).