Search

In biomedicine, polymer blends are frequently applied in wound dressing design or drug delivery. Within these applications, poly(2-alkyl/aryl-2-oxazoline)s (PAOx) are emerging as a popular matrix d...

Poly(2-oxazoline)s and, more recently, also poly(2-oxazine)s represent an emerging class of polymers with a broad range of applications. Surprisingly, to date, the statistical copolymerization of these two cyclic imino ether monomers has not yet been reported. Herein, we demonstrate that the statistical copolymerization of 2-oxazines with 2-oxazolines can lead to the formation of amphiphilic gradient copolymers in a single step. These gradient copolymers combine the high structural modularity of poly(2-oxazoline)s with the excellent biological properties of poly(2-oxazine)s, especially poly(2-methyl-2-oxazine). The copolymerization was found to proceed in a nonexpected way with the relative incorporation rates of the monomers being opposite to the reactivity observed for the corresponding homopolymerizations. In fact, the statistical copolymerizations lead to faster incorporation of the 2-oxazine followed by a gradual transition toward the 2-oxazoline. The self-assembly properties of the prepared amphiphilic poly[(2-methyl-2-oxazine)- grad-(2-butyl-2-oxazoline)] (PMeOzi- grad-PBuOx) as well as the thermoresponsive poly[(2-methyl-2-oxazine)- grad-(2-propyl-2-oxazoline)] (PMeOzi- grad-PPrOx) confirmed their potential as stimuli-responsive nonionic surfactants for various applications. Finally, the noncytotoxic character and cellular uptake of PMeOzi- grad-PBuOx copolymers was confirmed in vitro in SKOV3 cells.

International audience; Conjugation of drugs to polymers is a widely used approach to gain control over the release of therapeutics. In this contribution, salicylic acid, a multipurpose model drug, is conjugated to the biocompatible poly(2ethyl-2-oxazoline) (PEtOx). The drug is attached to the side chains of a polymer carrier through a hydrolytically cleavable ester linker, via a sequential postpolymerization modification. The chemical modulation of this ester, i.e., by primary or secondary alcohols, is demonstrated to greatly influence the ester hydrolysis rate. This crucial parameter allows us to tune the in vitro kinetics of the sustained drug release for periods exceeding a month in phosphate-buffered saline (PBS). The synthetic accessibility of the cleavable linker, together with the modularity of the drug release rate offered by this approach, highlights the utility of this class of polymers in the field of long-lasting drug delivery systems for persistent and chronic disease treatment.

In this report, we describe the synthesis and properties of poly(2-dialkylamino-2-oxazoline)s (PAmOx), a new class of thermoresponsive polymers. These polymers were synthesized by acylation of linear polyethyleneimine, as the conventional cationic ring-opening polymerization of the respective monomers led to extensive chain transfer reactions. The hydrophilicity of obtained poly(2-dialkylamino-2-oxazoline)s was highly dependent on the side-chain substituents, ranging from very hydrophilic poly(2-dimethylamino-2-oxazoline) to the hydrophobic poly(2-diisopropylamino-2-oxazoline). Notably, the poly(2-diethylamino-2-oxazoline) (PDEAOx) shows fast-response LCST behavior around room temperature (24 °C), as well as low Tg (−10 °C), which can be beneficial in the construction of new stimuli-responsive biomaterials. Overall, PAmOx represent a novel polymer platform for a wide range of possible applications.

One-pot synthesis of gradient copolymers by statistical copolymerization represents an elegant route to amphiphilic copolymers as a basis for micellar systems. Herein, we propose a robust strategy to control the monomer distribution along the gradient copolymer chain by appropriate selection of the polymerization solvent. The gradient formation was investigated for copolymerizations of the hydrophilic 2-methyl-2-oxazoline (MeOx) and the hydrophobic 2-phenyl-2-oxazoline (PhOx) using sulfolane and acetonitrile as the polymerization solvents revealing a striking difference. In sulfolane, a quasi-block (CP2) like character was observed, whereas acetonitrile led to a more gradient-like (CP3) copolymer. The monomer distribution was found to have an impact on the micellization behavior of both amphiphilic copolymers, which was also compared with the analogous block copolymer (CP1). CP1 led to the formation of the smallest micelles, followed by a somewhat larger structure formed by CP2, while CP3 self-assembles into significantly larger nanoparticles. These findings open up a route to new amphiphilic copolymer systems with precisely fine-tuned architecture.

In this communication, we report for the first time the synthesis of defined high molar mass poly(2-methyl-2-oxazoline) (PMeOx), a water-soluble polymer with excellent anti-fouling properties. So far, there has been no report on low dispersity (Đ < 1.2) PMeOx longer than 10 kg mol−1. Higher molar mass would be beneficial for synthesis of polymer–drug conjugates, excipients as well as for other biomedical applications. We report our attempts to prepare defined high molar mass PMeOx via living cationic ring-opening polymerization (CROP) of its monomer using our optimized method that failed due to extensive chain transfer and chain coupling side reactions. Therefore, we proposed an alternative strategy to high molar mass PMeOx based on acetylation of well-defined linear polyethyleneimine (PEI) prepared by controlled side-chain hydrolysis of defined high molar mass PEtOx. This method allowed us to synthesize a series of low-dispersity PMeOx up to 58 kg mol−1 (Đ = 1.07). Considering the biomedical potential of PMeOx, the synthesis of such polymers might open a way to a new class of effective polymer-based therapeutics.

Poly(2-alkyl-2-oxazoline)s (PAOx) are regaining interest for biomedical applications. However, their full potential is hampered by the inability to synthesise uniform high-molar mass PAOx. In this work, we proposed alternative intrinsic chain transfer mechanisms based on 2-oxazoline and oxazolinium chain-end tautomerisation and derived improved polymerization conditions to suppress chain transfer, allowing the synthesis of highly defined poly(2-ethyl-2-oxazoline) s up to ca. 50 kDa (dispersity (D)

Magnetic resonance imaging using fluorinated contrast agents (19F MRI) enables to achive highcontrast in images due to the negligible fluorine background in living tissues. In this pilot study, we developed new biocompatible, temperature-responsive, and easily synthesized polymeric nanogels containing a sufficient concentration of magnetically equivalent fluorine atoms for 19F MRI purposes. The structure of the nanogels is based on amphiphilic copolymers containing two blocks, a hydrophilic poly[N-(2-hydroxypropyl)methacrylamide] (PHPMA) or poly(2-methyl-2-oxazoline) (PMeOx) block, and a thermoresponsive poly[N(2,2difluoroethyl)acrylamide] (PDFEA) block. The thermoresponsive properties of the PDFEA block allow us to control the process of nanogel self-assembly upon its heating in an aqueous solution. Particle size depends on the copolymer composition, and the most promising copolymers with longer thermoresponsive blocks form nanogels of suitable size for angiogenesis imaging or the labeling of cells (appr...

The sensitivity of biocompatible polymers to ionizing radiation plays a crucial role for the construction of polymer radiopharmaceutics, simultaneous radiotherapy and therapy with polymeric drugs, and the radiation sterilization of polymer samples. Herein, we answer the crucial but generally overlooked question of radiation stability of water-soluble biocompatible polymers that are used in designing of polymer radiotherapeutics. We ranked five different classes of widely used water-soluble polymers according to their sensitivity to the beta or gamma radiation, providing the guidelines for selection of appropriate polymers that will be in contact with radiation. As a result, poly[N-(2-hydroxypropyl)methacrylamide] (PHPMA) and poly(N-vinyl-2-pyrrolidone) (PVP) proved to be more resistant against ionizing radiation than poly(ethylene oxide) (PEO) or poly(2-ethyl-2-oxazoline) (PEtOx), which were crosslinked rapidly. Nevertheless, irradiation of PEtOx and PEO homopolymers appeared to be a fast and straightforward route to their respective hydrogels. Special emphasis was put on the beta radiation preparation of PEtOx hydrogels, which was never described before. Irradiation of poly(N-isopropyl acrylamide) (PNIPAM) in solution leads to its hydrophilization and an increase in its cloud point temperature.

The lack of cellular and tissue specificities in conventional chemotherapies along with the generation of a complex tumor microenvironment (TME) limits the dosage of active agents that reaches tumor sites, thereby resulting in ineffective responses and side effects. Therefore, the development of selective TME-responsive nanomedicines is of due relevance toward successful chemotherapies, albeit challenging. In this framework, we have synthesized novel, ready-to-use ROS-responsive amphiphilic block copolymers (BCs) with two different spacer chemistry designs to connect a hydrophobic boronic ester-based ROS sensor to the polymer backbone. Hydrodynamic flow focusing nanoprecipitation microfluidics (MF) was used in the preparation of well-defined ROS-responsive PSs; these were further characterized by a combination of techniques [

In this paper, we present the design and implementation of a 1H/19F volume coil for mouse body magnetic resonance (MR) imaging and spectroscopy using a high magnetic field (4.7 T). By changing the geometry of the coil rungs to include both nuclei for MR experiments, this innovative coil can be tuned over an extremely wide range of frequency. The coil, 45 mm in diameter and 55 mm in length, consists of a 12-rung birdcage-like structure. Using two types of tuning, the coil can generate a sufficiently homogeneous B1+ electromagnetic field within a working volume optimized for laboratory mouse. The first tuning involves changing the resonance frequency over a large frequency range. The electrical capacitance between the wires can be adjusted to reflect changes in the length of the coil. The second tuning comprises a habitual tuning transformer for precise detection in a narrow band. In contrast to widely used multinuclear coils, the coil presented here features only one resonance peak and can be manipulated according to the Larmor frequencies given for 1H and 19F. The coil was successfully tested using full-wave simulations of magnetic and electric field distributions under in vivo MR conditions.

We describe a new approach to depot drug delivery in which a copolymer poly[N-isopropyl acrylamide-co-N-(3-imidazolylpropyl)methacrylamide] (PNIPAM-co-ImPM) is considered as the main object and matrix for a new formulation strategy that provides the controlled and sustained release of an incorporated drug. The relatively low content of ImPM groups (1.6 mol%) was determined to be sufficient to introduce pH-sensitive behavior to the polymer. Together with NIPAM units, which possess a thermo-sensitive behavior, a dual sensitivity was imparted to the polymer that was investigated by means of turbidimetry and dynamic light scattering. A change in pH from 9 down to 4 was observed to result in the increase of the polymer transition temperature from 32 to 70 °C. The separation process is also accompanied with the formation of ca. 150–300 nm particles while above the transition temperature. The pH value of approximately 6.5 was defined as a boundary value, where certain properties of the system significantly change. This observation assumes a potential attractiveness of the system for biological applications in which injection is possible using a liquid form at pH ca. 5 without the risk of injection needle obstruction. In this way, a depot is formed at the application site upon simultaneously heating to body temperature and increasing the pH to the physiological value of 7.4. An in vivo experiment using the polymer in PBS (pH = 5.0) with paliperidone as a model drug showed excellent results regarding the release of the drug from a depot. The putative mechanism of action for our depot system is thoroughly described in the article.

Herein, we describe a new method for the synthesis of superhydrophilic poly(2-alkyl-2-oxazoline)s (PAOx) from poly(2-ethyl-2-oxazoline) (PEtOx). A well-defined linear polyethylenimine was prepared from PEtOx by controlled acidic hydrolysis of its side-chains followed by reacylation with different carboxylic acids. Using this protocol, we obtained a series of new hydrophilic PAOx containing side-chain ether groups with potential in biomaterials science. The relative hydrophilicity of the polymers was assessed, revealing that poly(2-methoxymethyl-2-oxazoline) (PMeO-MeOx) is the most hydrophilic PAOx reported to date. Additionally, the amorphous poly(2-methoxy-ethoxy-ethoxymethyl-2-oxazoline) (PDEGOx) shows the lowest reported glass transition temperature (-25 degrees C) within the PAOx family to date. The biomedical potential of the prepared polymers was further fortified by an in vitro cytotoxicity study, where all polymers appeared to be noncytotoxic. The described synthetic protocol is universal and can be extremely versatile, especially for PAOx that are difficult to prepare by conventional cationic ring-opening polymerization due to the monomer interference and/or degradation.

Sperm morphology is highly diversified across the animal kingdom and recent comparative evidence from passerine birds suggests that postcopulatory sexual selection is a significant driver of sperm evolution. In the present study, we describe sperm size variation among 20 species of African greenbuls and one bulbul (Passeriformes: Pycnonotidae) and analyze the evolutionary differentiation of sperm size within a phylogenetic framework. We found significant interspecific variation in sperm size; with some genera exhibiting relatively long sperm (e.g. Eurillas) and others exhibiting short sperm head lengths (e.g. Phyllastrephus). However, our results suggest that contemporary levels of sperm competition are unlikely to explain sperm diversification within this clade: the coefficients of inter-male variation (CVbm) in sperm length were generally high, suggesting relatively low and homogeneous rates of extra-pair paternity. Finally, in a comparison of six evolutionary or tree transformation models, we found support for both the Kappa (evolutionary change primarily at nodes) and Lambda (lineage-specific evolutionary rates along branches) models in the evolutionary trajectories of sperm size among species. We therefore conclude that African greenbuls have more variable rates of sperm size evolution than expected from a neutral model of genetic drift. Understanding the evolutionary dynamics of sperm diversification remains a future challenge. The final version of this research has been published in Biological Journal of the Linnean Society. © 2016 Oxford University Press

Inspired by the increasing popularity of poly(2-ethyl-2-oxazoline) (PEtOx) for biomedical applications, this study reports the complete and thorough solution analysis of the homologous series of biocompatible PEtOx samples in a very broad range of molecular weights ranging from 11.2 x 10(3) g mol(-1) up to 260 x 10(3) g mol(-1). The main focus of the research was on the determination of the conformational properties of PEtOx macromolecules at a temperature of 37 degrees C in phosphate buffered saline (PBS) simulating the parameters of physiological media. The polymers were studied in PBS solutions by analytical ultracentrifugation, dynamic light scattering (DLS), translational diffusion, and intrinsic viscosity measurements in a temperature range from 15 degrees C up to 72 degrees C. The complete set of Kuhn-Mark-Houwink-Sakurada scaling relationships revealed linear trends over the whole range of the studied molar masses, while the determined scaling indices at 37 degrees C correspond to the coil conformation in a thermodynamically good solvent ([eta] = 0.045 x M-0.62, s(0) = 0.010 x M-0.46 and D-0 = 1750 x M-0.54). Based on the intrinsic viscosity values (most sensitive characteristic to the size variations of polymer coils, [eta] similar to r(3)), it was demonstrated that PEtOx macromolecules in PBS solutions undergo a transition from swollen polymer coils with gradual deterioration of thermodynamic quality of solutions within the temperature range of 15-45 degrees C, reaching theta-conditions at 55 degrees C with further precipitation at 62-72 degrees C. Also, to the best of our knowledge, the conformational parameters (equilibrium rigidity/the Kuhn segment length and the diameter of the polymer chain) of PEtOx macromolecules were evaluated under physiological conditions for the first time and constitute A = 1.8 +/- 0.3 nm and d = 0.7 +/- 0.4 nm. These equilibrium rigidity values classify PEtOx as a flexible macromolecule with rigidity similar to that of poly(ethylene glycol). For the first time, we were able to demonstrate a direct influence of thermosensitivity on the rigidity of the biocompatible polymer: PEtOx. The Kuhn segment length is undoubtedly decreasing when approaching the LCST.

We designed and synthesized a new delivery system for the anticancer drug doxorubicin based on a biocompatible hydrophilic poly(2-ethyl-2-oxazoline) (PEtOx) carrier with linear architecture and narrow molar mass distribution. The drug is connected to the polymer backbone via an acid-sensitive hydrazone linker, which allows its triggered release in the tumor. The in vitro studies demonstrate successful cellular uptake of conjugates followed by release of the cytostatic cargo. In vivo experiments in EL4 lymphoma bearing mice revealed prolonged blood circulation, increased tumor accumulation and enhanced antitumor efficacy of the PEtOx conjugate having higher molecular weight (40 kDa) compared to the lower molecular weight (20 kDa) polymer. Finally, the in vitro and in vivo anti-cancer properties of the prepared PEtOx conjugates were critically compared with those of the analogous system based on the well-established PHPMA carrier. Despite the relatively slower intracellular uptake of PEtOx conjugates, resulting also in their lower cytotoxicity, there are no substantial differences in in vivo biodistribution and anti-cancer efficacy of both classes of polymer-Dox conjugates. Considering the synthetic advantages of poly(2-alkyl-2-oxazoline)s, the presented study demonstrates their potential as a versatile alternative to well-known PEO- or PHPMA-based materials for construction of drug delivery systems.

Poly(2-oxazoline)s (in literature abbreviated as PAOx, POx, or POZ, herein referred to as PAOx) represent an emerging class of biocompatible polymers outperforming polyethylene glycol (PEG) in many aspects, including their high synthetic versatility and structural modularity. In this review, we provide a brief introduction to PAOx chemistry and biology to sketch their potential in biomaterials science. Further, we provide a detailed comprehensive overview of the literature on PAOx-protein conjugates with emphasis on their critical evaluation and comparison with analogous systems based on PEG. Based on this literature overview, PAOx seem to be an excellent alternative to PEG in the construction of therapeutic polymer-protein conjugates.

A combination of new thermoresponsive statistical polyoxazolines, poly[(2-butyl-2-oxazoline)-stat-(2-isopropyl-2-oxazoline)] [pBuOx-co-piPrOx], with different hydrophobic moieties and F127 surfactant as a template system for the creation of thermosensitive nanoparticles for radionuclide delivery has recently been tested [Pánek, Filippov, Hrubý, Rabyk, Bogomolova, Kučka & Stěpánek (2012).Macromol. Rapid Commun.33, 1683–1689]. It was shown that the presence of the thermosensitive F127 triblock copolymer in solution reduces nanoparticle size and polydispersity. This article focuses on a determination of the internal structure and solution properties of the nanoparticles in the temperature range from 288 to 312 K. Here, it is demonstrated that below the cloud point temperature (CPT) the polyoxazolines and F127 form complexes that co-exist in solution with single F127 molecules and large aggregates. When the temperature is raised above the CPT, nanoparticles composed of polyoxazolines and F127 are predominant in solution. These nanoparticles could be described by a spherical shell model. It was found that the molar weight and hydrophobicity of the polymer do not influence the size of the outer radius and only slightly change the inner radius of the nanoparticles. At the same time, molar weight and hydrophobicity did affect the process of nanoparticle formation. In conclusion, poly(2-oxazoline) molecules are fully incorporated inside of F127 micelles, and this result is very promising for the successful application of such systems in radionuclide delivery.

It is demonstrated that glycogen as a biodegradable and inexpensive material coming from renewable resources can be used as a carrier for the construction of in vivo imaging nanoagents. The model system considered is composed of glycogen modified with gadolinium and fluorescent labels. Systematic studies of properties of these nanocarriers by a variety of physical methods and results of in vivo tests of biodegradability are reported. This represents, to the authors' best knowledge, the first such use of glycogen.

Tropical forests store 40–50 per cent of terrestrial vegetation carbon 1. However, spatial variations in aboveground live tree biomass carbon (AGC) stocks remain poorly understood, in particular in tropical montane forests 2. Owing to climatic and soil changes with increasing elevation 3, AGC stocks are lower in tropical montane forests compared with lowland forests 2. Here we assemble and analyse a dataset of structurally intact old-growth forests (AfriMont) spanning 44 montane sites in 12 African countries. We find that montane sites in the AfriMont plot network have a mean AGC stock of 149.4 megagrams of carbon per hectare (95% confidence interval 137.1–164.2), which is comparable to lowland forests in the African Tropical Rainforest Observation Network 4 and about 70 per cent and 32 per cent higher than averages from plot networks in montane 2,5,6 and lowland 7 forests in the Neotropics, respectively. Notably, our results are two-thirds higher than the Intergovernmental Panel on Climate Change default values for these forests in Africa 8. We find that the low stem density and high abundance of large trees of African lowland forests 4 is mirrored in the montane forests sampled. This carbon store is endangered: we estimate that 0.8 million hectares of old-growth African montane forest have been lost since 2000. We provide country-specific montane forest AGC stock estimates modelled from our plot network to help to guide forest conservation and reforestation interventions. Our findings highlight the need for conserving these biodiverse 9,10 and carbon-rich ecosystems.