Search

We image charge carrier transport over nanometers–micrometers and picoseconds–microseconds in halide double perovskites Cs2AgBiBr6 and Cs2AgTlBr6 single crystals using stroboscopic scattering micro...

TheabinitioBethe-Salpeter equation (BSE) approach, an established method for the study of excitons in materials, is typically solved in a limit where only static screening from electrons is captured. Here, we generalize this framework to include dynamical screening from phonons at lowest order in the electron-phonon interaction. We apply this generalized BSE approach to a series of inorganic lead halide perovskites,CsPbX3, withX = Cl, Br, and I. We find that inclusion of screening from phonons significantly reduces the computed exciton binding energies of these systems. By deriving a simple expression for phonon screening effects, we reveal general trends for their importance in semiconductors and insulators, based on a hydrogenic exciton model. We demonstrate that the magnitude of the phonon screening correction in isotropic materials can be reliably predicted using four material specific parameters: the reduced effective mass, static and optical dielectric constants, and frequency of the most strongly coupled longitudinal-optical phonon mode. This framework helps to elucidate the importance of phonon screening and its relation to excitonic properties in a broad class of semiconductors.

Halide double perovskites with alternating silver and pnictogen cations are an emerging family of photoabsorber materials with robust stability and band gaps in the visible range. However, the nature of optical excitations in these systems is not yet well understood, limiting their utility. Here, we use ab initio many-body perturbation theory within the $GW$ approximation and the Bethe-Salpeter equation approach to calculate the electronic structure and optical excitations of the double perovskite series Cs$_2$AgBX$_6$, with B=Bi$^{3+}$, Sb$^{3+}$, X = Br$^-$, Cl$^-$. We find that these materials exhibit strongly localized resonant excitons with energies from 170 to 434 meV below the direct band gap. In contrast to lead-based perovskites, the Cs$_2$AgBX$_6$ excitons are computed to be non-hydrogenic, with anisotropic effective masses and sensitive to local field effects, a consequence of their chemical heterogeneity. Our calculations demonstrate the limitations of the Wannier-Mott and Elliott models for this class of double perovskites and contribute to a detailed atomistic understanding of their light-matter interactions.

Perovskite solar cells are gaining increasing popularity due to their unprecedented rise in power conversion efficiency. However, concerns over the potential environmental impact of CH3NH3PbI3 are stimulating experimental and theoretical searches for the replacement of lead by nontoxic elements. In this study we explore all homovalent metal ions which could substitute lead in a perovskite halide configuration by performing a systematic combinatorial search over the entire periodic table. Our screening process selects compounds based on two concurrent criteria: the stability of the compound in a perovskite structure and the band gap. Using these search criteria, we are able to reduce the number of possible compounds from 248 to 25, including 15 compounds which have not yet been proposed as semiconductors for optoelectronics. We identify Mg as a potential candidate for partial replacement of Pb and show that the band gap of hypothetical magnesium iodide perovskites is tunable over a range of 0.8 eV via the ...

Hybrid organic-inorganic halide perovskites have emerged as a disruptive new class of materials, exhibiting optimum properties for a broad range of optoelectronic applications, most notably for photovoltaics. The first report of highly efficient organic-inorganic perovskite solar cells in 2012 marked a new era for photovoltaics research, reporting a power conversion efficiency of over 10%. Only five years after this discovery, perovskite photovoltaic devices have reached a certified efficiency of 22.7%, making them the first solution processable technology to surpass thin film and multi-crystalline silicon solar cells. The remarkable development of perovskite solar cells is due to the ideal optoelectronic properties of organic-inorganic lead-halide perovskites. The prototypical compound, methylammonium lead iodide, CH3NH3PbI3 is a direct band gap semiconductor with a band gap in the visible, high charge carrier mobility, long diffusion length and low excitonic binding energy. Due to these ideal properties, CH3NH3PbI3 is also drawing interest across many other applications beyond photovoltaics, such as light emitting devices, lasers, photocatalysts and transistors. The continued progress of metal-halide perovskite optoelectronics relies not only on a detailed understanding of the electronic and optical properties of materials in this class, but also on the development of practical strategies to tune their properties by controlling parameters such as chemical composition. In this context, ab initio computational modelling can play a key role in providing a physical interpretation of experimental measurements, and guiding the design of novel halide perovskites with tailored properties. In this chapter we will present an account of the contributions to this fast developing field of research from our computational modelling group.

Lead halide perovskites are materials with excellent optoelectronic and photovoltaic properties. However, some hurdles remain prior to commercialization of these materials, such as chemical stability, phase stability, sensitivity to moisture, and potential issues due to the toxicity of lead. Here, we report a new type of lead-free perovskite related compound, Cs2PdBr6. This compound is solution processable, exhibits long-lived photoluminescence, and an optical band gap of 1.6 eV. Density functional theory calculations indicate that this compound has dispersive electronic bands, with electron and hole effective masses of 0.53 and 0.85 me, respectively. In addition, Cs2PdBr6 is resistant to water, in contrast to lead-halide perovskites, indicating excellent prospects for long-term stability. These combined properties demonstrate that Cs2PdBr6 is a promising novel compound for optoelectronic applications.

Lead-free pnictogen/noble metal halide double perovskites Cs 2 BiAgCl 6 , Cs 2 BiAgBr 6 , and Cs 2 SbAgCl 6 are some of the most promising environmentally friendly alternatives to lead-halide perovskites. However, due to their relatively large band gaps (1.9-2.2 eV), they are not yet competitive candidates for use in photovoltaic devices. In this work, we perform a systematic study of the thermodynamic stability of the entire family of Cs 2 BB′X 6 compounds (B = Bi and Sb, B′ = Cu, Ag, and Au, and X = Cl, Br, and I), and we explore the possibility of chemical mixing as a route to stabilize pnictogen/noble metal halide perovskites with low band gaps. Our calculations indicate that Cs 2 BiAg 1-x Cu x Cl 6 mixes should be amenable to synthesis and could reduce the band gap down to 1.6-1.9 eV.

The recent discovery of lead-free halide double perovskites with band gaps in the visible represents an important step forward in the design of environmentally friendly perovskite solar cells. Within this new family of semiconductors, Cs2BiAgCl6 and Cs2BiAgBr6 are stable compounds crystallizing in the elpasolite structure. Following the recent computational discovery and experimental synthesis of these compounds, a detailed investigation of their electronic properties is warranted in order to establish their potential as optoelectronic materials. In this work, we perform many-body perturbation theory calculations and obtain high accuracy band gaps for both compounds. In addition, we report on the synthesis of Cs2BiAgBr6 single crystals, which are stable in ambient conditions. From our complementary theoretical and experimental analysis, we are able to assign the indirect character of the band gaps and obtain both experimental and theoretical band gaps of these novel semiconductors that are in close agreement.

Lead-based halide perovskites are emerging as the most promising class of materials for next generation optoelectronics. However, despite the enormous success of lead-halide perovskite solar cells, the issues of stability and toxicity are yet to be resolved. Here we report on the computational design and the experimental synthesis of a new family of Pb-free inorganic halide double-perovskites based on bismuth or antimony and noble metals. Using first-principles calculations we show that this hitherto unknown family of perovskites exhibits very promising optoelectronic properties, such as tunable band gaps in the visible range and low carrier effective masses. Furthermore, we successfully synthesize the double perovskite Cs2BiAgCl6, we perform structural refinement using single-crystal X-ray diffraction, and we characterize its optical properties via optical absorption and photoluminescence measurements. This new perovskite belongs to the Fm-3m space group, and consists of BiCl6 and AgCl6 octahedra alternating in a rock-salt face-centered cubic structure. From UV-Vis and PL measurements we obtain an indirect gap of 2.2 eV. The new compound is very stable under ambient conditions., Comment: GV and MRF contributed equally to this work

We use a layered solution crystal growth technique to synthesize high-quality single crystals of phenylalkylammonium lead iodide organic/inorganic hybrid compounds. Single-crystal X-ray diffraction reveals low-dimensional structures consisting of inorganic sheets separated by bilayers of the organic cations. The shortest alkyls yield two-dimensional structures consisting of inorganic sheets of corner-sharing PbI6-octahedra. However, the longer alkyls induce both corner- and face-sharing of the PbI6-octahedra, and form new compounds. Density functional theory calculations including spin-orbit coupling show quantum confinement in two dimensions for the shorter alkyls, and in one dimension for the longer alkyls, respectively. The face-sharing PbI6-octahedra create a confinement leading to effectively one-dimensional behavior. These confinement effects are responsible for the observed peak shifts in photoluminescence for the different phenylalkylammonium lead iodide hybrids. Our results show how the connectivity of the octahedra leads to confinement effects that directly tune the optical band gap.

Room-temperature films of black-phase cesium lead iodide (CsPbI3) are widely thought to be trapped in a cubic perovskite polymorph. Here, we challenge this assumption. We present structural refinement of room-temperature black-phase CsPbI3 in an orthorhombic polymorph. We demonstrate that this polymorph is adopted by both powders and thin films of black-phase CsPbI3, fabricated either by high- or low-temperature processes. We perform electronic band structure calculations for the orthorhombic polymorph and find agreement with experimental data and close similarities with orthorhombic methylammonium lead iodide. We investigate the structural transitions and thermodynamic stability of the various polymorphs of CsPbI3 and show that the orthorhombic polymorph is the most stable among its other perovskite polymorphs, but it remains less stable than the yellow nonperovskite polymorph.

A$_2$BB$^\prime$X$_6$ halide double perovskites based on bismuth and silver have recently been proposed as potential environmentally-friendly alternatives to lead-based hybrid halide perovskites. In particular, Cs$_2$BiAgX$_6$ (X = Cl, Br) have been synthesized and found to exhibit band gaps in the visible range. However, the band gaps of these compounds are indirect, which is not ideal for applications in thin film photovoltaics. Here, we propose a new class of halide double perovskites, where the B$^{3+}$ and B$^{+}$ cations are In$^{3+}$ and Ag$^{+}$, respectively. Our first-principles calculations indicate that the hypothetical compounds Cs$_2$InAgX$_6$ (X = Cl, Br, I) should exhibit direct band gaps between the visible (I) and the ultraviolet (Cl). Based on these predictions, we attempt to synthesize Cs$_2$InAgCl$_6$ and Cs$_2$InAgBr$_6$, and we succeed to form the hitherto unknown double perovskite Cs$_2$InAgCl$_6$. X-ray diffraction yields a double perovskite structure with space group $Fm\overline{3}m$. The measured band gap is 3.3 eV, and the compound is found to be photosensitive and turns reversibly from white to orange under ultraviolet illumination. We also perform an empirical analysis of the stability of Cs$_2$InAgX$_6$ and their mixed halides based on Goldschmidt's rules, and we find that it should also be possible to form Cs$_2$InAg(Cl$_{1-x}$Br$_{x}$)$_6$ for $x