Search

In this work, a surface cationized inorganic–organic hybrid foam was produced from porous geopolymer (GP) and cellulose nanocrystals (CNCs). GPs were synthesized from alkali-activated metakaolin using H₂O₂ as a blowing agent and hexadecyltrimethylammonium bromide (CTAB) as a surfactant. These highly porous GPs were combined at pH 7.5 with cationic CNCs that had been synthesized from dissolving pulp through periodate oxidation followed by cationization in a deep eutectic solvent. The GP-CNC hybrid foams were employed as reactive filters in the removal of the anionic dye, methyl orange (MO; 5–10 mg/L, pH 7). The effects of a mild acid wash and thermal treatments on the structure, properties, and adsorption capacity of the GPs with CNCs and MO were investigated. The CNCs aligned as films and filaments on the surfaces of the neutralized GPs and the addition of CNCs improved MO removal by up to 84% compared with the reference sample. In addition, CTAB was found to disrupt the attachment of CNCs on the pores and improve adsorption of MO in the GPs with and without CNCs.

In this work, we compared the main characteristics of highly porous geopolymer components for water treatment applications manufactured by 3D printing, direct foaming, or granulation. Furthermore, different approaches to impregnate the materials with Ag or Cu were evaluated to obtain filters with disinfecting or catalytic properties. The results revealed that all of the investigated manufacturing methods enabled the fabrication of components that possessed mesoporosity, suitable mechanical strength, and water permeability, even though their morphologies were completely different. Total porosity and compressive strength values were 28 vol% and 16 MPa for 3D-printed, 70–79 vol% and 1 MPa for direct-foamed, and 27 vol% and 10 MPa for granule samples. Both the filter preparation and the metal impregnation method affected the amount, oxidation state, and stability of Ag and Cu in the filters. However, it was possible to prepare filters with low metal leaching between a pH of 3–7, so that the released Ag and Cu concentrations were within drinking water standards.

The synergistic combination of different nanomaterials for improved performance in environmental applications such as the removal of aqueous micropollutants has attracted increasing interest in recent years. This study demonstrates a novel sequential adsorption–aggregation concept that harnesses tubular halloysite nanotubes (HNTs) and flexible cellulose nanofibrils (CNFs) for the removal of a small, anionic dye molecule, chrome azurol S, from water. Hollow HNTs were first allowed to interact with the aqueous dye solution, after which the dye-loaded colloidal nanotubes were aggregated and separated from the water phase with cationized CNFs. The combination of 25 mg CNFs with 1 g HNTs at pH 7 resulted in efficient removal of dye (80%) and turbidity (~100%) and the removal of dye was further promoted in more acidic conditions (within the pH range of 6–8.5) because of the attractive electrostatic interactions. Cationic CNFs not only enabled the separation of dye-loaded clay particles from the water phase through a rapid aggregation but also participated in dye removal through adsorption (~20%). In comparison with nano-sized HNTs, the dye removal performance of micro-sized and chemically similar kaolin was poor (43%). Given the good availability of both HNTs and CNFs and the low consumption of the more expensive component (i.e., CNFs) in the process, the concept is straightforward, readily applicable, environmentally benign, and potentially cost-effective.

Alkali-activation (or geopolymer) technology has gained a great deal of interest for its potential applications in water and wastewater treatment during the last decade. Alkali-activated materials can be prepared via a relatively simple and low-energy process, most commonly by treating aluminosilicate precursors with concentrated alkali hydroxide and/or silicate solutions at (near) ambient conditions. The resulting materials are, in general, amorphous, have good physical and chemical stability, ion-exchange properties, and a porous structure. Several of the precursors are industrial by-products or other readily available low-cost materials, which further enhances the environmental and economic feasibility. The application areas of alkali-activated materials in water and wastewater treatment are adsorbents/ion-exchangers, photocatalysts, high-pressure membranes, filter media, anti-microbial materials, pH buffers, carrier media in bioreactors, and solidification/stabilization of water treatment residues. The purpose of this review is to present a comprehensive evaluation of the rapidly growing prospects of alkali-activation technology in water and wastewater treatment.

Nano/microplastics (NPs/MPs) and organic micropollutants are contaminants exerting serious threats to aquatic ecosystems, which are further aggravated through their interactions. Organic micropollutants can adsorb on the surface of NPs/MPs, enter to the digestive systems of aquatic organisms with NPs/MPs, and desorb from the surface inside the organism. Consequently, the migration behaviour of organic micropollutants is significantly affected increasing their risk to accumulate in the food chain. Therefore, understanding the adsorption interactions between NPs/MPs and organic micropollutants is critical for evaluating the fate and impact of NPs/MPs in the environment. This review article provides an overview about the role of NPs/MPs as (temporary) sinks for organic micropollutants but also as primary sources of organic micropollutants through the leaching of plastic additives. Specifically, the following aspects are discussed: adsorption/desorption mechanisms (e.g., hydrophobic partitioning interaction, surface adsorption by van der Waals forces or hydrogen bonding, and pore filling), influencing environmental factors (e.g., pH, salinity, and dissolved organic matter), leaching of plastic additives from NPs/MPs, and potential ecotoxicological effects arising from the interactions of NPs/MPs and organic micropollutants.

Despite mineral wool waste is only a small fraction of total construction and demolition waste (CDW) by mass, it requires large transportation and landfilling capacities due to its low bulk density, and its utilization remains low compared to other CDW types. It is essential to understand the physical and chemical properties of this waste fraction in order to utilize it, e.g. as fiber reinforcement in composites or as supplementary cementitious material. Here, we provide a chemical and physical characterization of 15 glass wool and 12 stone wool samples of different ages collected from various locations across Europe. In addition, the chemical compositions of 61 glass and stone wool samples obtained from the literature are presented. Glass wool samples show little variation in their chemical composition, which resembles the composition of typical soda-lime silicate glass. Stone wool presents a composition similar to basaltic glass but with variability between samples in terms of calcium, magnesium, and iron content. Potentially toxic elements, such as Cr, Ba, and Ni, are present in mineral wools, but in low concentrations (

Alkali-activated binders have shown great potential in the reuse of industrial waste materials and have therefore received significant attention. The use of one-part or a “just-add-water” alkali-activated binder aims to avoid the use of alkali-activator solutions which have traditionally been utilized in two-part systems. By using a solid activator, the disadvantages posed by hazardous liquid activators (such as the difficulties of using them on-site) can be minimized. Ceramic materials represent a considerable fraction of construction and demolition wastes, and originate not only from the building process, but also as tiles from industry and rejected bricks. Besides using these waste materials as road sub-base or construction backfill materials, they can also be employed as supplementary cementitious materials or even as raw material for alkali-activated binders. This paper presents the strength development and microstructural results obtained from examining different compositions under various curing conditions (sealing, ambient, and submerged in water). Two different ceramic wastes (with and without firing) were used as a partial replacement (5–10% by mass) of ground granulated blast-furnace slag. Specimens were then cured under three different curing regimes, including: (1) plastic-sealed, (2) unsealed at ambient conditions with an average temperature of 23 °C and 35% RH, and (3) submerged in water until the test date. Mechanical testing (compressive and flexural strengths) and microstructural analysis (SEM/EDX, XRD, MIP, heat of hydration, TGA, and DTA) were used to determine the effects of curing conditions. The results showed that ceramic waste content and type, as well as curing regimes, greatly affect the chemical reaction products, strength development, and structural stability.

Geopolymers have been recently explored as sorbents for wastewater treatment, thanks to their mechanical and chemical stability and to their low-energy manufacturing process. One specific application could be the removal of ammonium (NH4+) through exchange with Na+ ions. Additive manufacturing (AM) represents an especially interesting option for fabrication, as it allows to tailor the size, distribution, shape, and interconnectivity of pores, and therefore the access to charge-bearing sites. The present study provides a proof of concept for NH4+ removal from wastewater using porous geopolymer components fabricated via direct ink writing (DIW) AM approach. A metakaolin-based ink was employed for the fabrication of a log-pile structure with 45° rotation between layers, producing continuous yet tortuous macropores which are responsible for the high permeability of the sorbents. The ink consolidates in an amorphous, mesoporous network, with the mesopores acting as preferential sites for ion exchange. The printed sorbents were characterized for their physicochemical and mechanical properties and the NH4+ removal capacity in continuous-flow column experiments by using a model effluent. The lattices present high permeability and high cation exchange capacity and maintained a high amount of active ions after four cycles, allowing to reuse them multiple times.

Micropollutants escaping conventional wastewater treatment processes pose a threat to biota and the environment. Amongst micropollutants, small and ionizable organic compounds are particularly challenging, since their removal depends significantly on prevailing conditions. In this study, anionic cellulose nanofibrils (CNFs) were shown to perform as promising adsorbents for an ionizable pharmaceutical, salbutamol. The adsorbents were produced from wood cellulose through succinylation pretreatment in urea-LiCl deep eutectic solvent (DES), followed by a nanofibrillation procedure. The impact of pH, contact time, salbutamol concentration, and adsorbent dose on salbutamol uptake were investigated in batch adsorption studies. Based on the results, the chemical modification of cellulose significantly enhanced the adsorption of salbutamol. The adsorption efficiency was mainly dependent on the charge and colloidal stability of the anionic nanofibril suspension rather than the charge of salbutamol, because the adsorption was considerably improved at pH > 7 due to the deprotonation of the cellulose carboxyl groups. The experimental maximum adsorption capacity was 196 mg/g. This study highlights the potential of cellulose nanomaterial adsorbents and the importance of controlling the charge of the adsorbent material when developing solutions for ionizable micropollutant removal.

Geopolymers are functional materials that can be used in various environmental applications such as adsorbents in pollutant removal from wastewaters. Metakaolin geopolymer (MK-GP) has been proven to be especially suitable for ammonium (NH4 +) removal. In this research, the optimal reagent and raw material ratios in the preparation of MK-GP in terms of NH4 + adsorption capacity were investigated. The response surface methodology based on the face-centered central composite design was used to optimize the levels of three factors: the amounts of hydroxide, silicate, and metakaolin. In addition, the effect of Na or K as the charge-balancing cation was studied. Empirical models were fitted to the experimental data using multiple linear regression. The significance of the models was confirmed by means of analysis of variance. Optimal NH4 + removal efficiency was achieved when the amounts of hydroxide and silicate were maximized, the amount of metakaolin was minimized, and Na-based reagents were used. These trends are most likely a result of optimized conversion of metakaolin into MK-GP.

Soapstone is a soft, magnesium-rich mineral widely used in the production of carved objects and architectural elements, for instance. The processing of soapstone causes the formation of significant amounts of waste powder, which is largely landfilled at the moment. The aim of the present study is to evaluate the suitability of soapstone waste as the main binder for the alkali-activation process using sodium silicate and hydroxide solutions as activators. The results demonstrate that soapstone alone reacts to some extent (compressive strength of 13 MPa at 28 day age), but mechanical properties are improved significantly after replacing 20% of soapstone by metakaolin (compressive strength of 31 MPa at 28 d age). The obtained mechanical properties are closely similar to those of virgin soapstone. Durability properties of the developed alkali-activated binders were similar or better than typical Portland cement-based binders in terms of high temperature, acid, and freeze-thaw resistance, and sorptivity. The material costs alkali-activated soapstone mortar were estimated as approximately 70 €/t. Thus, the results enable utilizing currently underexploited soapstone waste in a sustainable and economically interesting way.

Peracids have gained interest in the water treatment over the last few decades. Peracetic acid (CH3CO3H) has already become an accepted alternative disinfectant in wastewater disinfection whereas p...

Blast-furnace slag and metakaolin were geopolymerised, modified with barium or treated with a combination of these methods in order to obtain an efficient SO4(2-) sorbent for mine water treatment. Of prepared materials, barium-modified blast-furnace slag geopolymer (Ba-BFS-GP) exhibited the highest SO4(2-) maximum sorption capacity (up to 119mgg(-1)) and it compared also favourably to materials reported in the literature. Therefore, Ba-BFS-GP was selected for further studies and the factors affecting to the sorption efficiency were assessed. Several isotherms were applied to describe the experimental results of Ba-BFS-GP and the Sips model showed the best fit. Kinetic studies showed that the sorption process follows the pseudo-second-order kinetics. In the dynamic removal experiments with columns, total SO4(2-) removal was observed initially when treating mine effluent. The novel modification method of geopolymer material proved to be technically suitable in achieving extremely low concentrations of SO4(2-) (

Geopolymers are aluminosilicate compounds that are amorphous analogues of zeolites, and thus possess similar cation-exchange properties. Geopolymers have been successfully applied to remove toxic metals and organic dyes from aqueous solutions. In this study, geopolymer was synthesized from metakaolin and applied to remove ammonium (NH 4 + ) from model solutions and landfill leachate. Geopolymerization increased the ammonium removal capacity, surface area and average pore width and changed the chemical structure of metakaolin. The maximum NH 4 + removal capacity of the geopolymer was 21.07 mg g − 1 which was 46% higher than the capacity of the reference clinoptilolite–heulandite zeolite (14.42 mg g − 1 ). The adsorption data of the geopolymer and zeolite fitted best to the Langmuir–Freundlich isotherm and the removal kinetics followed the pseudo-second order kinetic equation. The spent geopolymer adsorbent was regenerated efficiently using 0.2 M NaCl and 0.1 M NaOH as a regenerant. A small-scale continuous field experiment with landfill leachate was performed and further indicated that the metakaolin-based geopolymer could be a feasible NH 4 + removal adsorbent.

Sulfate (SO₄²⁻) is a ubiquitous anion in natural waters. It is not considered toxic, but it may be detrimental to freshwater species at elevated concentrations. Mining activities are one significant source of anthropogenic sulfate into natural waters, mainly due to the exposure of sulfide mineral ores to weathering. There are several strategies for mitigating sulfate release, starting from preventing sulfate formation in the first place and ending at several end-of-pipe treatment options. Currently, the most widely used sulfate-removal process is precipitation as gypsum (CaSO₄·2H₂O). However, the lowest reachable concentration is theoretically 1500 mg L⁻¹ SO₄²⁻ due to gypsum’s solubility. At the same time, several mines worldwide have significantly more stringent sulfate discharge limits. The purpose of this review is to examine the process options to reach low sulfate levels (< 1500 mg L⁻¹) in mine effluents. Examples of such processes include alternative chemical precipitation methods, membrane technology, biological treatment, ion exchange, and adsorption. In addition, aqueous chemistry and current effluent standards concerning sulfate together with concentrate treatment and sulfur recovery are discussed.

Ammonium (NH₄⁺) removal from municipal wastewater poses challenges with the commonly used biological processes. Especially at low wastewater temperatures, the process is frequently ineffective and difficult to control. One alternative is to use ion-exchange. In the present study, a novel NH4+ ion-exchanger, metakaolin geopolymer (MK-GP), was prepared, characterised, and tested. Batch experiments with powdered MK-GP indicated that the maximum exchange capacities were 31.79, 28.77, and 17.75 mg/g in synthetic, screened, and pre-sedimented municipal wastewater, respectively, according to the Sips isotherm (R² ≥ 0.91). Kinetics followed the pseudo-second-order rate equation in all cases (kp₂ = 0.04–0.24 g mg⁻¹ min⁻¹, R² ≥ 0.97) and the equilibrium was reached within 30–90 min. Granulated MK-GP proved to be suitable for a continuous column mode use. Granules were high-strength, porous at the surface and could be regenerated multiple times with NaCl/NaOH. A bench-scale pilot test further confirmed the feasibility of granulated MK-GP in practical conditions at a municipal wastewater treatment plant: consistently

The mining industry is a major contributor of various toxic metals and metalloids to the aquatic environment. Efficient and economical water treatment methods are therefore of paramount importance. The application of natural or low-cost sorbents has attracted a great deal of interest due to the simplicity of its process and its potential effectiveness. Geopolymers represent an emerging group of sorbents. In this study, blast-furnace-slag and metakaolin geopolymers and their raw materials were tested for simultaneous removal of Ni(II), As(III) and Sb(III) from spiked mine effluent. Blast-furnace-slag geopolymer proved to be the most efficient of the studied materials: the experimental maximum sorption capacities for Ni, As and, Sb were 3.74 mg/g, 0.52 mg/g, and 0.34 mg/g, respectively. Although the capacities were relatively low due to the difficult water matrix, 90–100% removal of Ni, As, and Sb was achieved when the dose of sorbent was increased appropriately. Removal kinetics fitted well with the pseudo-second-order model. Our results indicate that geopolymer technology could offer a simple and effective way to turn blast-furnace slag to an effective sorbent with a specific utilization prospect in the mining industry.