Search

An approach to induce conductivity in immiscible polystyrene/polypropylene (PS/PP) blends is described using a percolated conducting polyaniline/polyamide (PANI/PA) filler combined with a polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene‐graft‐maleic anhydride compatibilizer. The approach is based on the ability of the compatibilizer to concomitantly stabilize the cocontinuous morphology and to improve the state of dispersion of the PANI/PA filler. Selective localization of PANI/PA in the PS phase with improved filler dispersion is achieved with the optimal master batch (MB) preparation technique followed by its optimized sequence addition to the blend components. This results in an increase in the dc conductivity by six decades as compared with that of the neat compatibilized blend at an effective 4.8‐wt % PANI concentration. An investigation of the effect of functionality and concentration of the filler and the compatibilizer on the filler connectivity in the blend is performed. The prevailing specific interactions are analyzed by Fourier transform infrared spectroscopy and thermogravimetric analysis of the MBs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48433.

This work addresses the effect of deformation twinning on the dissolution corrosion behaviour of 316 L austenitic stainless steels in contact with static liquid lead-bismuth eutectic (LBE). For this purpose, plastically deformed 316 L steel specimens with distinctly different deformation twin densities were simultaneously exposed to oxygen-poor (

Cu pumping is defined as the irreversible extrusion of Cu from Cu-filled through-silicon vias (TSVs) exposed to high temperatures. The distribution of Cu pumping values over the TSVs of a single wafer has a large intrinsic spread. In previous publications both a lognormal distribution and a distribution of the maximum of two normal variables were used to fit experimental data. In this paper, these two types of statistical distribution are compared, showing that the maximum of two normal distributions provides a better fit, in particular at the right tail which is more significant for the potential reliability impact of Cu pumping. Also, it is shown how Cu pumping is determined by the network of random high angle grain boundaries in the Cu region near the TSV top, as an extension of a previous analysis which occurred at the TSV top surface only. This relation between Cu pumping and Cu microstructure provides a physical interpretation of the maximum of two normal distributions, based on the deformation mechanisms underlying Cu pumping.

A photoacoustic, laser ultrasonics based approach in an Impulsive Stimulated Scattering (ISS) implementation was used to investigate the texture in polycrystalline metal plates. The angular dependence of the 'polycrystalline' surface acoustic wave (SAW) velocity measured along regions containing many grains was experimentally determined and compared with simulated results that were based on the angular dependence of the 'single grain' SAW velocity within single grains and the grain orientation distribution. The polycrystalline SAW velocities turn out to vary with texture. The SAW velocities and their angular variations for {110} texture were found to be larger than that the ones for {111} texture or the strong γ fiber texture. The SAW velocities for {001} texture were larger than for {111} texture, but with almost the same angular dependence. The results infer the feasibility to apply angular SAW angular dispersion measurements by laser ultrasonics for on-line texture monitoring.

This study addresses the effect of plastic deformation on the dissolution corrosion behavior of a Type 316L austenitic stainless steel. Dissolution corrosion was promoted by low oxygen conditions in liquid lead-bismuth eutectic (LBE). Specimens with controlled degree of plastic deformation (20%, 40%, and 60%) and a non-deformed, solution-annealed specimen were simultaneously exposed for 1,000 h at 500°C to static LBE with low oxygen concentration ([O] < 10−11 mass%). The corroded specimens were analyzed by various material characterization techniques. All exposed specimens exhibited dissolution corrosion. The non-deformed steel showed the least dissolution attack (maximum depth: 36 μm), while the severity of attack increased with the degree of steel deformation (maximum depth in the 60% steel: 96 μm). It was, thus, concluded that increasing the amount of plastic deformation in a Type 316L stainless steel results in higher dissolution corrosion damages for steels exposed to low oxygen LBE conditions. Addit...

The mechanism governing the electrical properties for phase separating blends containing multiwall carbon nanotubes (MWNTs) is unravelled by tuning the compatibilization efficiency. Thereto, compatibilization by interfacially segregated block and random copolymers (cp) of poly(styrene-random/block-methyl methacrylate)(PS-r/b-PMMA) was achieved in phase separating blends of poly[(α-methyl styrene)-co-acrylonitrile]/poly(methylmethacrylate) (PαMSAN/PMMA) undergoing spinodal decomposition. A systematic study of the effects of copolymer architecture and molecular weight on the percolating network of selectively localized MWNTs is performed. Effective compatibilization is achieved with block cp irrespective of the ability of the blocks to entangle, whereas for random cp only long random cp having the ability to effectively entangle with the homopolymers are as efficient as long block cp. With increasing copolymer concentration, an increase and subsequent saturation of the electrical conductivity is attained. This originates from an increased connectivity and refinement of the MWNT laden PαMSAN phase, as confirmed by optical microscopy and the linear viscoelastic response of the blends. An effective compatibilizer led to an interfacial tension mediated suppression of an interfacial coarsening of the PαMSAN phase during phase separation, subsequently leading to percolation of MWNTs selectively localized in the PαMSAN phase. Furthermore, the copolymer having the ability to promote the development of a percolated network of MWNTs also allowed the network to be formed at a lower copolymer concentration as compared to that of blends with copolymers leading to restricted improvement in the connectivity of MWNTs. Our robust and simple procedure to tune the blend morphology via the efficiency of the compatibilizers can be used to achieve a synergistic increase in conducting properties.

DNA nanotechnology has a great potential in biosensor design including nanostructuring of the biosensor surface through DNA origami, target recognition by means of aptamers, and DNA-based signal amplification strategies. In this paper, we use DNA nanotechnology to describe for the first time the concept of real-time solid-phase monitoring of DNAzyme cleavage activity for the detection of specific single-stranded DNA (ssDNA) with a fiber optic surface plasmon resonance (FO-SPR) biosensor. Hereto, we first developed a robust ligation strategy for the functionalization of the FO-SPR biosensing surface with ssDNA-tethered gold nanoparticles, serving as the substrate for the DNAzyme. Next, we established a relation between the SPR signal change, due to the cleavage activity of the 10–23 DNAzyme, and the concentration of the DNAzyme, showing faster cleavage kinetics for higher DNAzyme concentrations. Finally, we implemented this generic concept for biosensing of ssDNA target in solution. Hereto, we designed a DNAzyme–inhibitor complex, consisting of an internal loop structure complementary to the ssDNA target, that releases active DNAzyme molecules in a controlled way as a function of the target concentration. We demonstrated reproducible target detection with a theoretical limit of detection of 1.4 nM, proving that the presented ligation strategy is key to a universal DNAzyme-based FO-SPR biosensing concept with promising applications in the medical and agrofood sector. ispartof: ACS Applied Materials & Interfaces vol:11 issue:7 pages:6759-6768 ispartof: location:United States status: published

International audience; The potential and limitations of Rayleigh wave spectroscopy to characterize the elastic depth profile of heterogeneous functional gradient materials are investigated by comparing simulations of the surface acoustic wave dispersion curves of different profile-spectrum pairs. This inverse problem is shown to be quite ill posed. The method is then applied to extract information on the depth structure of a glass-ceramic ͑ alumina͒ functionally graded material from experimental data. The surface acoustic wave analysis suggests the presence of a uniform coating region consisting of a mixture of Al2O3 and glass, with a sharp transition between the coating and the substrate. This is confirmed by scanning electron microscope with energy dispersive x-ray analysis.

© 2019 by the authors. A laser ultrasonics approach to remotely characterize the elastic and thermal properties of a coating-substrate structure, used to protect fuel claddings in lead-bismuth eutectic cooled nuclear reactors, is presented and validated with experimental results. A transient grating geometry is used for multiple wavelength excitation of thermoelastic displacements, and laser beam deflection for detection. The value of Young's modulus of the coating layer as calculated from the coating's Rayleigh velocity of 190 ± 50 GPa is in accordance with a nano-indentation measurement. Using a priori knowledge concerning the density and elastic parameters of the coating and substrate, scanning the sample allows the obtaining of a coating thickness map in a fully remote, all-optical way, with an accuracy of about 4 microns for a coating of around 20-micron average thickness. Analyzing the transient thermal grating decay yields a thermal diffusivity value of (5.0 ± 1.6) × 10 -6 m 2 /s, in the range of low-carbon steels. The consistency of the results infers that the all-optical laser ultrasonics approach should be feasible for remote inspection of the quality of optically rough coated claddings in the harsh environment of a nuclear reactor. ispartof: Applied Sciences-Basel vol:9 issue:5 status: published