Search

In this paper, we demonstrate an active switching of extremely high Q-factor Fano resonances using vanadium oxide (VO2)-implanted THz asymmetric double C-shaped metamaterial (MM) structures. The simulation results indicate the highly temperature-sensitive nature of the double Fano resonances that can be switched at very low external thermal pumping (68 &deg, C), which is only slightly higher than room temperature. We employ the surface current and electric field distributions of the structure to analyze the physical mechanism of the observed switching behavior in the thermally excited Fano MMs. More importantly, by optimizing the asymmetric parameter (offset length), the linewidth of the Fano resonance can reach only 0.015 THz and the Q-factor is as high as 98, which is one order of magnitude higher than that of the traditional MMs. The findings of this work would enable a thermally-induced high-Q Fano resonance MMs for ultra-sensitive sensors, modulators, low threshold switching in metadevices.

Arrays of metal–dielectric–metal (MDM) multilayer nanostructure can support various kinds of plasmonic modes including in-plane (IP) localized/delocalized surface plasmons or lattice resonances, photonic waves, as well as out-of-plane (OP) plasmon modes. Hybridization between different modes offers rich physics such as lasing, sub- and super-radiant modes, and efficient light absorption. While interplays between different sets of in-plane modes have been intensively investigated, the interaction between in-plane and out-of-plane modes is rarely explored. Here, we propose a MDM nanostructure with 2D nanocylinder array and study in detail the strong coupling between the in-plane photonic modes at the dielectric layer and the out-of-plane plasmon modes excited at the cylinder sidewalls. We demonstrate the strong coupling between the localized second-order IP mode and the first-order OP mode with a Rabi splitting up to 250 meV in the near-infrared region. A new IP mode arising from the radiative field can induce another kind of strong coupling with OP modes as the cylinder radius is larger than 98 nm. The underlying physics within this plasmon–photon system is quantitatively revealed by the coupled oscillator model and calculated E-field distribution. The proposed MDM system provides a good platform for investigating multimode coupling and nano-optics devices.

A novel adsorbent, tartaric acid modified graphene oxide (GO-TA), was successfully prepared by a simple esterification reaction and applied to remove Cu(II) and Pb(II) metal ions from aqueous solutions. The obtained composites were characterized by Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy and transmission electron microscopy (TEM). Batch experiments were carried out to investigate the effect of pH value, contact time, concentration of metal ions and temperature on Cu(II) and Pb(II) adsorption. The maximum adsorption capacities for Cu(II) and Pb(II) are 374.53 mg g−1 and 125.63 mg g−1, respectively, which were higher than those of pristine graphene oxide (GO). The obtained experimental data showed a good correlation with the Langmuir adsorption model. The adsorption kinetics of Cu(II) and Pb(II) onto GO-TA composite was found to be well fit for the pseudo-second-order model. Moreover, thermodynamic parameters including ΔGθ 0 and ΔSθ> 0, indicating that the adsorption of Cu(II) and Pb(II) onto GO-TA composite was spontaneous and endothermic in nature. All these results indicated that GO-TA composite with such high adsorption efficiency and fast adsorption equilibrium could be used to clean up heavy metal pollution in the future.

In this work, a novel activated carbon containing graphene composite was developed using a fast, simple, and green ultrasonic-assisted method. Graphene is more likely a framework which provides support for activated carbon (AC) particles to form hierarchical microstructure of carbon composite. Scanning electron microscope (SEM), transmission electron microscope (TEM), Brunauer–Emmett–Teller (BET) surface area measurement, thermogravimetric analysis (TGA), Raman spectra analysis, XRD, and XPS were used to analyze the morphology and surface structure of the composite. The electrochemical properties of the supercapacitor electrode based on the as-prepared carbon composite were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), charge/discharge, and cycling performance measurements. It exhibited better electrochemical performance including higher specific capacitance (284 F g−1 at a current density of 0.5 A g−1), better rate behavior (70.7% retention), and more stable cycling performance (no capacitance fading even after 2000 cycles). It is easier for us to find that the composite produced by our method was superior to pristine AC in terms of electrochemical performance due to the unique conductive network between graphene and AC.