Search

Many biological high-performance composites, such as bone, antler, and crustacean cuticles, are composed of densely mineralized and ordered nanofiber materials. The mimicry of even simplistic bioinspired structures, i.e., of densely and homogeneously mineralized nanofibrillar materials with controllable mechanical performance, continues to be a grand challenge. Here, using alkaline phosphatase as an enzymatic catalyst, we demonstrate the dense, homogeneous, and spatially controlled mineralization of calcium phosphate nanostructures within networks of anionically charged cellulose nanofibrils (CNFs) and cationically charged chitin nanofibrils (ChNFs)-both emerging biobased nanoscale building blocks for sustainable high-performance materials design. Our study reveals that anionic CNFs lead to a more homogeneous nanoscale mineralization with very high mineral contents up to ca. 70 wt % with a transition from amorphous to crystalline deposits, while cationic ChNFs yield rod-like crystalline morphologies. The bone-inspired CNF bulk films exhibit a significantly increased stiffness, maintain good flexibility and translucency, and have a significant gain in wet state mechanical properties. The mechanical properties can be tuned both by the enzyme concentration and the mineralization time. Moreover, we also show a spatial control of the mineralization using kinetically controlled substrate uptake in a dialysis reactor, and by spatially selectively incorporating the enzyme into 2D printed filament patterns. The strategy highlights possibilities for spatial encoding of enzymes in tailored structures and patterns and programmed mineralization processes, promoting the potential application of mineralized CNF biomaterials with complex gradients for bone substitutes and tissue regeneration in general.

Nacre's natural design consists of a perfect hierarchical assembly that resembles a brick-and-mortar structure with synergistic stiffness and toughness. The field of bioinspired materials often provides attractive architecture and engineering pathways which allow to explore outstanding property areas. However, the study of nacre-mimetic materials should not be limited to the design of its architecture but ought to include the understanding, operation, and improvement of internal interactions between their components. Here, we introduce a vitrimer prepolymer system that, once integrated into the nacre-mimetic nanocomposites, cures and cross-links with the presence of Lewis acid catalyst and further manifests associative dynamic exchange reactions. Bond exchanges are controllable by molecular composition and catalyst content and characterized by creep, shear-lag, and shape-locking tests. We exploit the vitrimer properties by laminating ca. 70 films into thick bulk materials, and characterize the flexural resistance and crack propagation. More importantly, we introduce recycling by grinding and hot-pressing. The recycling for highly reinforced nacre-mimetic nanocomposites is critically enabled by the vitrimer chemistry and improves the sustainability of bioinspired nanocomposites in cyclic economy. Finally, we integrate photothermal converters into the structures and use laser irradiation as external trigger to activate the vitrimer exchange reactions.

Bioinspired materials engineering impacts the design of advanced functional materials across many domains of sciences from wetting behavior to optical and mechanical materials. In all cases, the advances in understanding how biology uses hierarchical design to create failure and defect-tolerant materials with emergent properties lays the groundwork for engaging into these topics. Biological mechanical materials are particularly inspiring for their unique combinations of stiffness, strength, and toughness together with lightweightness, as assembled and grown in water from a limited set of building blocks at room temperature. Wood, nacre, crustacean cuticles, and spider silk serve as some examples, where the correct arrangement of constituents and balanced molecular energy dissipation mechanisms allows overcoming the shortcomings of the individual components and leads to synergistic materials performance beyond additive behavior. They constitute a paradigm for future structural materials engineering-in the formation process, the use of sustainable building blocks and energy-efficient pathways, as well as in the property profiles-that will in the long term allow for new classes of high-performance and lightweight structural materials needed to promote energy efficiency in mobile technologies.This Account summarizes our efforts of the past decade with respect to designing self-assembling bioinspired materials aiming for both mechanical high-performance structures and new types of multifunctional property profiles. The Account is set out to first give a definition of bioinspired nanocomposite materials and self-assembly therein, followed by an in-depth discussion on the understanding of mechanical performance and rational design to increase the mechanical performance. We place a particular emphasis on materials formed at high fractions of reinforcements and with tailor-made functional polymers using self-assembly to create highly ordered structures and elucidate in detail how the soft polymer phase needs to be designed in terms of thermomechanical properties and sacrificial supramolecular bonds. We focus on nanoscale reinforcements such as nanoclay and nanocellulose that lead to high contents of internal interfaces and intercalated polymer layers that experience nanoconfinement. Both aspects add fundamental challenges for macromolecular design of soft phases using precision polymer synthesis. We build upon those design criteria and further develop the concepts of adaptive bioinspired nanocomposites, whose properties are switchable from the outside using molecularly defined triggers with light. In a last section, we discuss how new types of functional properties, in particular flexible and transparent gas barrier materials or fire barrier materials, can be reached on the basis of the bioinspired nanocomposite design strategies. Additionally, we show new types of self-assembled photonic materials that can even be evolved into self-assembling lasers, hence moving the concept of mechanical nanocomposite design to other functionalities.The comparative discussion of different bioinspired nanocomposite architectures with nematic, fibrillar, and cholesteric structures, as based on different reinforcing nanoparticles, aims for a unified understanding of the design principles and shall aid researchers in the field in the more elaborate design of future bioinspired nanocomposite materials based on molecular control principles. We conclude by addressing challenges, in particular also the need for a transfer from fundamental molecular materials science into scalable engineering materials of technological and societal relevance.

A generic, facile, and waterborne strategy is introduced to fabricate flexible, low-cost nanocomposite films with room-temperature phosphorescence (RTP) by incorporating waterborne RTP polymers into self-assembled bioinspired polymer/nanoclay nanocomposites. The excellent oxygen barrier of the lamellar nanoclay structure suppresses the quenching effect from ambient oxygen (kq ) and broadens the choice of polymer matrices towards lower glass transition temperature (Tg ), while providing better mechanical properties and processability. Moreover, the oxygen permeation and diffusion inside the films can be fine-tuned by varying the polymer/nanoclay ratio, enabling programmable retention times of the RTP signals, which is exploited for transient information storage and anti-counterfeiting materials. Additionally, anti-interception materials are showcased by tracing the interception-induced oxygen history that interferes with the preset self-erasing time. Merging bioinspired nanocomposite design with RTP materials contributes to overcoming the inherent limitations of molecular design of organic RTP compounds, and allows programmable temporal features to be added into RTP materials by controlled mesostructures. This will assist in paving the way for practical applications of RTP materials as novel anti-counterfeiting materials.

The development of on-demand cross-linking strategies is a key aspect in promoting mechanical properties of high-performance bioinspired nanocomposites. Here, we embed styrene sulfonyl azide groups with latent chemical reactivity into water-soluble copolymers and assemble those with high-aspect-ratio synthetic nanoclays to generate well-defined layered polymer/nanoclay nacre-mimetics. A considerable stiffening and strengthening occurs upon activation of the covalent cross-linking using simple heating. Varying the amount of cross-linkable units allows molecular control of mechanical properties from ductile to stiff and strong. Moreover, the covalent cross-linking enhances the moisture stability of water-borne nacre-mimetics. The strategy is facile and versatile allowing for a transfer into applications.

The effect of graphene defects on the performance of polymer-based material was investigated to obtain thermal conductive and strong materials for various commercial portable electronics. The flexible lateral heat hybrid films based on graphene sheets (GSs) and nanofibrillated cellulose (NFC) were fabricated via a vacuum-assisted self-assembly technique. The hybrid film with low-defect density GSs exhibited high thermal conductivity (TC) of 6.75 W m−1 K−1 at 10 wt % GS loading. Compared with pure NFC film, the hybrid film showed excellent enhancement of 501.6%, which was 1.5× times higher than those with high-defect density GSs. The relationship between defect density of GSs and TC of hybrid films was consistent with the published simulation results. Meanwhile, the hybrid film with low-defect density GSs also exhibited higher toughness, tensile strength and Young's modulus than those with high-defect density GSs. NFC/GS hybrid films With high TC and mechanical properties can be used as a potential candidate for flexible lateral heat spreaders.

The transition toward future sustainable societies largely depends on disruptive innovations in biobased materials to substitute nonsustainable advanced functional materials. In the field of optics, advanced devices (e.g., lasers or metamaterial devices) are typically manufactured using top���down engineering and synthetic materials. This work breaks with such concepts and switchable lasers self���assembled from plant���based cellulose nanocrystals and fluorescent polymers at room temperature and from water are shown. Controlled structure formation allows laser���grade cholesteric photonic bandgap materials, in which the photonic bandgap is matched to the fluorescence emission to function as an efficient resonator for low threshold multimode lasing. The lasers can be switched on and off using humidity, and can be printed into pixelated arrays. Additionally, the materials exhibit stiffness above typical thermoplastic polymers and biodegradability in soil. The concept showcases that highly advanced functions can be encoded into biobased materials, and opens the design space for future sustainable optical devices of unprecedented function. The study demonstrates sustainable, switchable, and biodegradable laser devices self���assembled from cellulose nanocrystals (CNCs) as the resonator and dye���doped water���soluble polymers as the gain medium., publishedVersion

The miniaturization, integration, and lightweight of modern electronics have posed serious challenges to the development of high-performance and multifunctional thermal management materials. Here, we reported SiO2-coated nanofibrillated cellulose (NFC)/boron nitride nanosheets (BNNS) hybrid films with excellent thermal conductivity (TC) and hydrophobicity. These films were easily constructed via vacuum-assisted filtration and subsequent hydrophobic coating. The hybrid films exhibit a well-defined aligned structure with in-plane oriented BNNS. This finding was proven via wide-angle and small-angle X-ray scattering techniques, allowing for a high TC of up to 10.88 W m−1 K−1 at a low BNNS content of 7 wt%. Moreover, the hydrophobic hybrid films achieve high tensile strength (166.47 MPa) and electrical insulating property (volume resistivity = 1.2 × 1012 Ω cm). Inspired by the lotus effect, the water contact angle of such hydrophobic hybrid films reaches 143°, showing great potential in real applications for preventing the adverse effects of water and moisture.

Transmittance and haze are key properties of light diffusion materials. Hybrid light diffusion agents (LDAs) and melt-blending process are introduced to study optical performance and mechanical properties of polycarbonate (PC) light diffusion materials. Optical properties of PC composites prepared by two-step melt-blending process has better repeatability compared to one-step method due to the better dispersion state of hybrid fillers in PC matrix. The hybrid fillers silicate microspheres (SMS)/nano titania particles (nTiO2) are more suitable for PC matrix compared to cross-linked poly(methyl methacrylate) microspheres (PMMA)/nTiO2, for the reason that the PC/SMS/nTiO2 composites exhibit favorable optical performance and almost no deterioration of mechanical properties. The good balance between high transmittance and substantial haze can be achieved when the SMS/nTiO2 content is 1.2 wt% (the transmittance and haze are 60.97% and 88.73%, respectively). POLYM. ENG. SCI., 57:374–380, 2017. © 2016 Society of Plastics Engineers

Development of rational vectors for efficient drug and gene delivery is crucial for cancer treatment. In this study, epidermal growth factor receptor (EGFR)-binding peptide amphiphile (PA) were used as the primary bilayer skeleton material to construct ultra-stable self-assembling peptide nanovesicle (SPV). The resulted EGFR-targeted SPV (ESPV) could efficiently encapsulate therapeutic cargos (drugs or small interfering RNAs [siRNAs]) or labelled fluorescent cargo (quantum dots [QDs]) and exhibited excellent affinity for EGFR-positive cancer cells. Moreover, ESPV could deliver more drug or plasmid DNA to tumour sites and promote gene expression (a three-fold ratio of ESPVs vs cationic liposomes). Notably, the individual delivery or co-delivery of doxorubicin (DOX) and the acetylcholinesterase (AChE) gene via the ESPVs resulted in excellent drug/gene delivery both in vitro and in vivo and exerted a significant growth-suppressing effect on a liver cancer xenograft. This nanoscale, targeted cargo-packaging technology may provide a new strategy for the design of highly targeted cancer therapy vectors.

Nanopapers containing cellulose nanofibrils (CNFs) are an emerging and sustainable class of high performance materials. The diversification and improvement of the mechanical and functional property space critically depend on integration of CNFs with rationally designed, tailor-made polymers following bioinspired nanocomposite designs. Here we combine for the first time CNFs with colloidal dispersions of vitrimer nanoparticles (VP) into mechanically coherent nanopaper materials. Vitrimers are permanently cross-linked polymer networks that undergo temperature-induced bond shuffling through an associative mechanism and which allow welding and reshaping on the macroscale. The choice of low glass transition, hydrophobic vitrimers derived from fatty acids and polydimethylsiloxane (PDMS), and achieving dynamic reshuffling of cross-links through transesterification reactions enables excellent compatibility and covalent attachment onto the CNF surfaces. Moreover, the resulting films are ductile, stretchable and offer high water resistance. The success of imparting the vitrimeric polymeric behavior into the nanocomposite, as well as the curing mechanism of the vitrimer, is highlighted through thorough analysis of structural and mechanical properties. The dynamic exchange chemistry of the vitrimers enables efficient welding of two nanocomposite parts as characterized by good bonding strength during single lap shear tests. In the future, we expect that the dynamic character of vitrimers becomes a promising option for the design of mechanically adaptive bioinspired nanocomposites and for shaping and reshaping such materials.

The anisotropic thermally conductive flexible films with nanofibrillated cellulose (NFC) and in situ reduced graphene oxide (RGO) nanosheets are prepared via a vacuum-assisted self-assembly technique. The hybrid films exhibit superior in-plane thermal conductivities, and a value of 6.168 W m−1 K−1 is achieved with 30 wt% GO loading. Noteworthily, the through-plane thermal conductivities are extremely low (≤0.072 W m−1 K−1). The high anisotropy of the thermal conductivity is systematically investigated and correlated to the alignment of RGO nanosheets. Moreover, hybrid films exhibit excellent flexibility as well as high tensile strength. The aligned RGO nanosheets significantly delayed the thermal degradation of the hybrid films. The strongly anisotropic thermally conductive properties of these films can be useful for their application in thermal management.

An anisotropic thermally conductive film with tailorable microstructures and macroproperties is fabricated using a layer-by-layer (LbL) assembly of graphene oxide (GO) and nanofibrillated cellulose (NFC) on a flexible NFC substrate driven by hydrogen bonding interactions, followed by chemical reduction process. The resulting NFC/reduced graphene oxide (RGO) hybrid film reveals an orderly hierarchical structure in which the RGO nanosheets exhibit a high degree of orientation along the in-plane direction. The assembly cycles dramatically increase the in-plane thermal conductivity (λX) of the hybrid film to 12.6 W·m–1·K–1, while the cross-plane thermal conductivity (λZ) shows a lower value of 0.042 W·m–1·K–1 in the hybrid film with 40 assembly cycles. The thermal conductivity anisotropy reaches up to λX/λZ = 279, which is substantially larger than that of similar polymeric nanocomposites, indicating that the LbL assembly on a flexible NFC substrate is an efficient technique for the preparation of polymeric n...