Search

A novel vertical non-van der Waals (non-vdW) heterostructure of graphene and hexagonal boron nitride (G/hBN) is realized and its application in direct four-electron oxygen reduction reaction (ORR) in alkaline medium is established. The G/hBN differs from previously demonstrated vdW heterostructures, where it has a chemical bridging between graphene and hBN allowing a direct charge transfer - resulting in high ORR activity. The ORR efficacy of G/hBN is compared with that of graphene-hBN vdW structure and individual layers of graphene and hBN along with that of benchmark platinum/carbon (Pt/C). The ORR activity of G/hBN is found to be on par with Pt/C in terms of current density but with much higher electrochemical stability and methanol tolerance. The onset potential of the G/hBN is found to be improved from 780 mV at a glassy carbon electrode to 930 mV and 940 mV in gold and platinum electrodes, respectively, indicating its substrate-dependent catalytic activity. This opens possibilities of new benchmark catalysts of metals capped with G/hBN atomic layers, where the underneath metal is protected while keeping the activity similar to that of pristine metal. Density functional theory-based calculations are found to be supporting the observed augmented ORR performance of G/hBN.

Due to exceptional electronic, optoelectronic and catalytic properties, MoS2 has attracted extensive research interest in various applications. In the present scenario, the exploitation of noble-metal-free catalysts for hydrogen evolution is of great interest. Herein, we report the structural, optical, magnetic and electrocatalytic properties of pure and nickel-substituted MoS2 nanostructures synthesized by the hydrothermal method. X-ray diffraction (XRD) analysis reveals that all samples exhibit the hexagonal structure of MoS2 and the formation of NiS2 at higher concentrations of nickel. Vibrating sample magnetometer (VSM) measurements of the Mo1−xNixS2 nanostructures show a hysteresis loop at room temperature with a higher saturation magnetization for 1% Ni-substituted MoS2 nanostructures, confirming the ferromagnetic behaviour of the sample. The indirect-to-direct band gap transition of few-layered nanostructures was confirmed by the optical absorption spectrum showing bands in the 600–700 nm and 350–450 nm regions. This study also highlights the excitation wavelength-dependent down- and up-conversion photoluminescence of the as-synthesized samples, providing new horizons for the design of MoS2-based optical and spintronic devices. The electrocatalytic effect of 3% Ni-substituted MoS2 nanostructures has been found to be higher than that of other deposit concentrations as it corresponds to the efficient hydrogen evolution reaction (HER).

An enzyme-free sensitive hydrogen peroxide (H2O2) amperometric sensor is developed to detect H2O2 released from living cells using palladium nanoparticles supported on sulfonic acid functionalized mesoporous silica microspheres (Pd@SO3H-MSM). It is synthesized by an easy and facile method and is subsequently used for fabrication of an electrochemical sensing scaffold via drop-casting modification of a glassy carbon electrode (represented as GC/Pd@SO3H-MSM). Comprehensive characterizations including transmission electron microscopy, scanning electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, UV–vis spectrophotometry and electrochemical impedance spectroscopy to confirm the existence and nature of Pd nanoparticles in Pd@SO3H-MSM. GC/Pd@SO3H-MSM electrode demonstrates electrocatalytic activity for H2O2 reduction in phosphate buffer, leading to a sensitive H2O2 amperometric sensor with wide linear range (47.0 nM-1.0 mM), low detection limit (14.0 nM) and high sensitivity (0.36 μA mM−1 cm-2). It exhibits high selectivity, good reproducibility and long-term stability. More importantly, Pd@SO3H-MSM exhibits no toxicity to living cells and based on its remarkable analytical advantages, it is further unswervingly used to execute real-time detection of H2O2 released from living tumor cells and healthy normal cells. Thus Pd@SO3H-MSM acts as promising material for amperometric determination of H2O2 as well as used to accomplish real-time quantitative detection of H2O2 in biological environment.

A sacrificial template, Fe-MIL-88 is used to synthesize Ni–Fe layered double hydroxide (Ni–Fe LDH). The metal-organic framework (Fe-MIL-88) is synthesized from the precursors, ferric nitrate and terephthalic acid. Electrocatalytic oxidation of kojic acid (KA) is realized by Ni–Fe LDH film which is coated on a glassy carbon electrode (GC). Under the optimized conditions, amperometry measurements at the Ni–Fe LDH coated GC as a function of KA concentration demonstrates a sensitive determination of KA. The calibration curve shows two linear ranges, 1–1500 µM and 1500–4500 µM for the KA determination. Detection limit for the KA determination is estimated as 0.73 µM. The practical applicability of this method is confirmed by measuring the KA concentration present in various real samples. A new sensor for the determination kojic acid is developed based on Ni–Fe layered double hydroxide which is synthesized through the Fe-MIL-88 templated route. Further, the synthesized material is used for the determination of kojic acid present in different brands of commercial tomato sauces.

An electrochemical sensor for hydrogen peroxide (H2O2) present in face bleach cream is fabricated using a composite based on bentonite (Bt) clay and copper oxide (CuO) nanoparticles (CuO-Bt). The CuO nanoparticles’ immobilization into Bt was carried out by a two-step process in which Cu2+ is ion-exchanged into Bt layers (Cu2+-Bt) in the first step followed by the chemical reaction of NaOH with Cu2+-Bt in the second step to get the target material, CuO nanoparticles immobilized Bt (CuO-Bt). The successful immobilization of CuO nanoparticles into Bt is investigated by a variety of techniques like scanning electron microscopy, transmission electron microscopy, FT-IR spectroscopy, UV-Vis spectroscopy, and electrochemical methods. The CuO-Bt composite is coated on a glassy carbon electrode and used as a selective electrochemical sensing platform for the determination of H2O2 based on the significant electrocatalytic property of CuO-Bt towards the H2O2 oxidation. This amperometric electrochemical sensor shows two linear detection ranges (5–50 μM and 50–10000 μM) with a limit of detection of 4.9 μM. The sensitivity is calculated to be 0.06 µA µM−1 cm−2. This electrochemical sensor exhibits high selectivity, stability, and practical applicability for the H2O2 determination in real samples.

Metal-graphene composites are sought after for various applications. A hybrid light-weight foam of nickel (Ni) and reduced graphene oxide (rGO), called Ni-rGO, is reported here for small molecule oxidations and thereby their sensing. Methanol oxidation and non-enzymatic glucose sensing are attempted with the Ni-rGO foam via electrocatalytically, and an enhanced methanol oxidation current density of 4.81 mA/cm2 is achieved, which is ~1.7 times higher than that of bare Ni foam. In glucose oxidation, the Ni-rGO electrode shows a better sensitivity over bare Ni foam electrode where it could detect glucose linearly over a concentration range of 10 μM to 4.5 mM with a very low detection limit of 3.6 μM. This work demonstrates the synergistic effects of metal and graphene in oxidative processes, and also shows the feasibility of scalable metal-graphene composite inks development for small molecule printable sensors and fuel cell catalysts.

A new redox-free electrochemical approach for driving the deposition of two-dimensional (2D) layered MoS2 nanosheets is described. First, poly(acylic acid) (PAA) functionalized layered MoS2 nanosheets (PAA-MoS2) is prepared to form a stable aqueous PAA-MoS2 dispersion, which is subsequently used for the electrochemical deposition. In contrast to previous electrodeposition methods of MoS2, which involve the redox of molecular precursors of Mo and S, herein we introduce an electrochemical approach for the deposition of 2D layered MoS2 nanosheets directly from their nanometric building blocks, namely from their aqueous dispersion. This “nano to nano” approach is based on altering the ionic strength at the vicinity of the electrode surface by applying a potential. Specifically, the electrogeneration of Cu2+ ions, cause the PAA-MoS2 nanosheets in the dispersion to aggregate and deposit on the copper electrode. Scanning electron microscopy, X-ray diffraction, Raman and X-ray photoelectron spectroscopy analysis show clearly that the deposited layered MoS2 maintains its original structure. Furthermore, the electrodeposited PAA-MoS2 nanosheets on copper show excellent catalytic activity for the hydrogen evolution reaction with low overpotential. Hence, we believe that these findings could lead to a generic approach for the formation of thin films or patterns of 2D nanomaterials.

In this report, an electrochemical sensing scaffold (ESS) for hydrazine (HZ) and nitrobenzene (NB) have been developed based on gold nanoparticles decorated mesoporous silica microspheres (Au-MSM) modified glassy carbon (GC) electrode (represented as GC/Au-MSM). The presence and formation of gold nanoparticles in Au-MSM composite material is verified by X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, scanning electron microscopy, transmission electron microscopy and by electrochemical methods. The textural and thermal properties are studied by nitrogen adsorption-desorption and thermogravimetric analysis, respectively. The electrocatalytic sensing behavior of GC/Au-MSM towards HZ and NB are investigated in detail employing various electrochemical techniques. Amperometry measurements as a function of HZ concentration exhibit two linear calibration ranges of 5.0 μM to 0.5 mM and 0.5–18.0 mM. Similarly, the differential pulse voltammetry measurements as a function of NB concentration show a linear calibration range of 0.1 μM to 2.5 mM. The limit of detection is evaluated to be 0.11 μM and 15.0 nM for HZ and NB, respectively. The kinetic parameters for HZ oxidation and NB reduction are discussed using chronoamperometry. The proposed GC/Au-MSM ESS shows good selectivity over potent interferences and applied to determine HZ and NB in various water samples.

Anionic redox mediator-incorporated polymer scaffold on glassy carbon (GC) electrode has been used for the electrocatalytic determination of nitrite. The polymer based on branched polyethylenimine (BPEI) crosslinked with ethylene glycol diglycidyl ether (EGDE) (BPEI-EGDE) has been employed as the potent scaffold. BPEI-EGDE film on GC electrode has been used to immobilize anionic redox mediator [Fe(CN)6]3− by ion-exchange and utilized as the scaffold for the electrochemical determination of nitrite. The voltammetric analysis confirms the confinement of the redox mediator inside the polymer film. This polymeric scaffold, GC/BPEI-EGDE/[Fe(CN)6]3− exhibits a reversible redox response for [Fe(CN)6]3−/4− and retains its redox activity and stability even in strong acidic conditions. The redox mediator confined into the polymer scaffold catalyzes the reduction of nitrite. Significant enhancement in the cathodic current associated with the concomitant decrease in the anodic current was observed in the presence of nitrite. The electrocatalytic response of the scaffold was exploited for the amperometric sensing of nitrite at the potential of 450 mV. The polymer scaffold is highly sensitive (28.5 µA mM−1 cm−2) and it could detect nitrite at micromolar levels (detection limit is 4.8 µM). The scaffold has been successfully used for the real sample analysis and high selectivity, stability, and reproducibility have been achieved.

An electrochemical sensing platform which comprises gold nanoparticles (Au NPs) incorporated zinc based metal-organic framework (MOF-5) is developed for the sensitive determination of nitrite and nitrobenzene. MOF-5 and Au NPs incorporated MOF-5 (Au-MOF-5) are synthesized and characterized by UV-vis absorption, powder X-ray diffraction, FT-IR, scanning electron microscopy with energy dispersive X-ray analysis and elemental mapping, transmission electron microscopy and atomic force microscopy. Oxidation of nitrite is effectively electrocatalyzed at Au-MOF-5 with significant increase in oxidation current (41 and 38% in comparison with bare glassy carbon (GC) and MOF-5 coated GC (GC/MOF-5) electrodes, respectively) and with considerable decrease in the oxidation potential (0. 17 and 0.25 V in comparison with bare GC and GC/MOF-5 electrodes, respectively). The electrocatalytic reduction of nitrobenzene at GC/Au-MOF-5 is confirmed by an appreciable increase in the reduction current (79 and 36% in comparison with bare GC and GC/MOF-5 electrodes, respectively) and a small shift in the reduction potential (20 mV in comparison with GC/MOF-5). The detection limit is calculated as 1.0 μM with a sensitivity of 0.23 μAμM −1 cm −2 for nitrite and 15.3 μM with a sensitivity of 0.43 μAμM −1 cm −2 for nitrobenzene determinations. The Au-MOF-5 based electrochemical sensing platform shows high stability and selectivity even in the presence of several interferences (including phenols, inorganic ions and biologically important molecules) with a broad calibration range. Certain kinetic parameters of nitrite oxidation and nitrobenzene reduction have also been studied by hydrodynamic voltammetry.

In the present manuscript, a simple and easy route to synthesize bentonite (bt) clay-supported gold nanoparticles (Au NPs) is reported (represented as Au-bt). Application of this new environmentally benign material in electrocatalytic determination of arsenite (As(III)) was studied. The successful synthesis and incorporation of Au NPs into the bt clay is supported by spectroscopic, microscopic and electrochemical methods. The synthesized Au-bt material was used to modify glassy carbon electrode (GC) by the evaporation of Au-bt aqueous suspension dropped on the surface of the GC (GC/Au-bt). Cyclic voltammetry and chronoamperometry studies of As(III) solutions were performed with this GC/Au-bt electrode which act as efficient platform for the electro-oxidation of As(III) to As(V) at a very low overpotential. Kinetic parameters were evaluated for the oxidation of As(III) at the GC/Au-bt platforms. A wide linear calibration range for the determination of As(III) from 1 to 1700 μM was obtained with high reproducibility and stability. A limit of detection, 0.1 μM was achieved with high sensitivity. Additionally, it showed a good selectivity for the determination of As(III) in the presence of copper(II) and other interfering ions suggesting a promising new route for trace level determination of As(III) in neutral conditions.

This study reports the simple, selective and sensitive voltammetric detection of riboflavin (RF) using methylene blue (MB) incorporated sulfonic acid functionalized mesoporous silica microspheres (MSM), represented as MB-SO3H-MSM. MB-SO3H-MSM is synthesized and characterized by spectroscopic and microscopic methods. This material is coated on a glassy carbon (GC) electrode (symbolized as GC/MB-SO3H-MSM) to utilize it in electroanalytical applications. The electrochemical behavior of MB-SO3H-MSM is established using the GC/MB-SO3H-MSM electrode by cyclic voltammetry (CV) and electrochemical impedance spectroscopy techniques. The electrochemical behavior of RF at the GC/MB-SO3H-MSM electrode is also studied by CV. Compared to bare GC and SO3H-MSM coated GC, the GC/MB-SO3H-MSM electrode shows favorable electron transfer kinetics as well as an enhanced and stable electrochemical response of RF. Furthermore CV and differential pulse voltammetry (DPV) are used for the quantitative determination of RF at the GC/MB-SO3H-MSM electrode. The DPV response shows two linear calibration ranges of 10.0 nM to 15.0 μM and 15.0 to 50.0 μM. The detection limit based on the first linear calibration range is calculated as 5.0 nM with a sensitivity of 393.0 μA mM−1 cm−2. The fabricated sensing scaffold shows an excellent selectivity for RF over other soluble vitamins and interfering ions. The stability, reproducibility and determination of RF in pharmaceutical products are also demonstrated effectively.

The electrocatalytic activity of silver nanoparticle-incorporated bentonite clay (Ag-Bt) for hydrogen peroxide (H2O2) reduction is investigated in 0.1 M pH 7.0 phosphate buffer solution. Ag-Bt material-coated glassy carbon (GC) electrode displays high electrocatalytic activity for H2O2 reduction with increased current response in comparison with GC/Bt electrode. The catalytic current increases linearly with incremental addition of H2O2 from 10 µM to 5.0 mM (based on the amperometric experiments at an applied potential −0.3 V). The apparent diffusion coefficient for H2O2 and catalytic rate constant for H2O2 reduction at the GC/Ag-Bt platform are calculated to be 2.3 × 10−5 cm2 s−1 and 2.20 × 104 M−1 s−1, respectively. The practical application using the Ag-Bt material is shown for the determination of H2O2 in real sample. The GC/Ag-Bt platform exhibits low detection limit (9.1 µM), high selectivity, reproducibility and stability.