Search

We present an innovative, simple, and versatile hydrophobic valve enabling all-important complex liquid manipulations on self-powered, channel-based microfluidic devices and as such being extremely valuable for the design of highly demanding point-of-care (POC) platforms. The presented hydrophobic valve is made of filter paper treated with a fluorinated compound (i.e., Aquapel) and shows both superhydrophobic properties (contact angle up to 155°) and high resistance to liquid pressure (up to 9 kPa), while retaining gas permeability and utter fabrication simplicity. Whereas this valve can be integrated in any channel-based system and can be used both as a vent, to delay liquid displacement on chip, or as a barrier, to stop the liquid flow in a certain direction, in this work we demonstrate some of its capacities by combining it with our in house developed self-powered SIMPLE and iSIMPLE platforms. First, we integrated it with the infusion iSIMPLE pump, thus generating completely fail-proof activation regardless of how the operator is actuating the system. Second, we used hydrophobic valves as both barrier and vent in the same microfluidic chip, which allowed the combination of two SIMPLE pumps for splitting one sample in two parallel channels. This attribute is fundamental for achieving multiplex analysis on completely autonomous microfluidic platforms. Finally, we achieved an unprecedented liquid manipulation for a self-powered microfluidic platform, namely, shuttling of liquid, after a single user activation by combining for the first time SIMPLE and iSIMPLE with the developed hydrophobic vent and barrier, all in a single chip. These results convincingly demonstrated that the developed hydrophobic valve combined with SIMPLE/iSIMPLE presents an essential building block for an ideal POC system, which is self-powered, inexpensive, and robust and can perform complex bioassays upon a single user activation. ispartof: ACS SENSORS vol:4 issue:3 pages:694-703 ispartof: location:United States status: published

In recent years, Teflon-on-glass microwells have been successfully implemented in bead-based digital bioassays for the sensitive detection of single target molecules. Their hydrophilic-in-hydrophobic (HIH) nature enables the isolation and analysis of individual beads, carrying the target molecules, which can be further manipulated accurately through optical tweezer (OT) setups. However, these Teflon HIH-microwell platforms are conventionally fabricated through a complex, time-consuming and labor-intensive dry lift-off procedure which involves a series of major steps, limiting the up-scaling potential of these platforms. Alternative Teflon-based microwell fabrication methods have been extensively explored in literature but they preclude the generation of hydrophobic wells with hydrophilic bottom, thereby hampering the bioassay performance. Here, we present a new Teflon-on-glass molding method for the high throughput fabrication of hydrophilic-in-hydrophobic (HIH) microwell arrays, able to empower bead-based digital bioassays. Microwells 2.95 &mu, m in depth and 3.86 &mu, m in diameter were obtained to host individual beads. In these microwell arrays, sealing of reagents was demonstrated with an efficiency of 100% and seeding of superparamagnetic beads was achieved with an efficiency of 99.6%. The proposed method requires half as many steps when compared to the traditional dry lift-off process, is freely scalable and has the potential to be implemented in different bead-based bioassay applications.

Digital microfluidics has emerged in the last years as a promising liquid handling technology for a variety of applications. Here, we describe in detail how to build up an electrowetting-on-dielectric-based digital microfluidic chip with unique advantages for performing single-molecule detection. We illustrate how superparamagnetic particles can be printed with very high loading efficiency (over 98 %) and single-particle resolution in the microwell array patterned in the Teflon-AF® surface of the grounding plate of the chip. Finally, the potential of the device for its application to single-molecule detection is demonstrated by the ultrasensitive detection of the biotinylated enzyme β-Galactosidase captured on streptavidin-coated particles in the described platform.