Search

Proteases are often used as biomarkers of many pathologies as well as of microbial contamination and infection. Therefore, extensive efforts are devoted to the development of protease sensors. Some applications would benefit from wireless monitoring of proteolytic activity at minimal cost, e.g., sensors embedded in care products like wound dressings and diapers to track wound and urinary infections. Passive (batteryless) and chipless transponders stand out among wireless sensing technologies when low cost is a requirement. Here, we developed and extensively characterized a composite material that is biodegradable but still highly stable in aqueous media, whose proteolytic degradation could be used in these wireless transponders as a transduction mechanism of proteolytic activity. This composite material consisted of a cross-linked gelatin network with incorporated caprylic acid. The digestion of the composite when exposed to proteases results in a change of its resistivity, a quantity that can be wirelessly monitored by coupling the composite to an inductor-capacitor resonator, i.e., an antenna. We experimentally proved this wireless sensor concept by monitoring the presence of a variety of proteases in aqueous media. Moreover, we also showed that detection time follows a relationship with protease concentration, which enables quantification possibilities for practical applications.

The Mo-dependent enzyme YiiM enzyme from Escherichia coli is a member of the sulfite oxidase family and shares many similarities with the well-studied human mitochondrial amidoxime reducing component (mARC). We have investigated YiiM catalysis using electrochemical and spectroscopic methods. EPR monitored redox potentiometry found the active site redox potentials to be Mo

Continuous and automated bacteria detection is pivotal for a myriad of biomedical, food safety and envi-ronmental applications. This work presents the fabrication of a prototype of a passive (battery-free) radio frequency sensor for wireless detection of bacteria. The sensing mechanism is based on the bacterial-induced (proteases and peptidases) degradation of glutaraldehyde (GTA) cross-linked gelatin-caprylic acid (CA) composite film. Proteolytic degradation of the film resulted in a decrease of its resistivity, a quan-tity that could be wirelessly monitored by coupling the film to a radio-frequency antenna (an inductor-capacitor resonator) and monitoring the frequency for which the transferred power between this antenna and another antenna connected to a Vector Network Analyzer (VNA) was maximized. We experimen-tally proved this concept by monitoring E.coli bacteria in aqueous medium and detected at 18.0 +/- 2.8 h, 23.5 +/- 0.7 h, 27.0 +/- 2.8 h, 40.5 +/- 3.5 h, 45.5 +/- 0.7 h for the initial E.coli concentration of 3.2 +/- 10(8) , 6.8 +/- 10(7) , 2.3 +/- 10(6) , 4.3 +/- 10(5) , and 3.6 +/- 10(4) CFU/mL, respectively. Further, the E.coli induced degrada-tion of the composite film was investigated by evaluating the thickness of the film by optical microscopy as well as morphology by scanning electron microscopy techniques. (C) 2021 Published by Elsevier Ltd.

A central conserved arginine, first identified as a clinical mutation leading to sulfite oxidase deficiency, is essential for catalytic competency of sulfite oxidizing molybdoenzymes, but the molecular basis for its effects on turnover and substrate affinity have not been fully elucidated. We have used a bacterial sulfite dehydrogenase, SorT, which lacks an internal heme group, but transfers electrons to an external, electron accepting cytochrome, SorU, to investigate the molecular functions of this arginine residue (Arg78). Assay of the SorT Mo centre catalytic competency in the absence of SorU showed that substitutions in the central arginine (R78Q, R78K and R78M mutations) only moderately altered SorT catalytic properties, except for R78M which caused significant reduction in SorT activity. The substitutions also altered the Mo-centre redox potentials (MoVI/V potential lowered by ca. 60-80mV). However, all Arg78 mutations significantly impaired the ability of SorT to transfer electrons to SorU, where activities were reduced 17 to 46-fold compared to SorTWT, precluding determination of kinetic parameters. This was accompanied by the observation of conformational changes in both the introduced Gln and Lys residues in the crystal structure of the enzymes. Taking into account data collected by others on related SOE mutations we propose that the formation and maintenance of an electron transfer complex between the Mo centre and electron accepting heme groups is the main function of the central arginine, and that the reduced turnover and increases in KMsulfite are caused by the inefficient operation of the oxidative half reaction of the catalytic cycle in enzymes carrying these mutations.

We report an electrochemical nitrate biosensor incorporating the enzyme nitrate reductase (NR) from the fungus Neurospora crassa entrapped within a polymeric chitosan matrix on a glassy carbon (GC) electrode. The artificial electron mediator anthraquinone sulfonate (AQ) is utilized as an electron transfer partner (co-substrate) for NR. The NR enzyme was effectively immobilized within the chitosan matrix without the need for a dialysis membrane, and exhibited high sensitivity and selectivity for nitrate using either rotating disk cyclic voltammetry or constant potential amperometry methods. A particular feature was the longevity of the biosensor which retained more than 70% activity over a period of 3 months. The practical application of the biosensor was demonstrated by the determination of nitrate concentrations in lake and river water samples without any pre-treatment, and the results were validated with a reliable spectroscopic assay.

Direct electrochemistry of human sulfite oxidase (HSO) has been achieved on carboxylate-terminated self-assembled monolayers cast on a Au working electrode in the presence of the promoter chitosan. The modified electrode facilitates a well-defined nonturnover redox response from the heme cofactor (FeIII/II) in 750 mM Tris, MOPS, and bicine buffer solutions. The formal redox potential of the nonturnover response varies slightly depending on the nature of the thiol monolayer on the Au electrode. Upon addition of sulfite to the cell a pronounced catalytic current from HSO-facilitated sulfite oxidation is observed. The measured catalytic rate constant (kcat) is around 0.2 s–1 (compared with 26 s–1 obtained from solution assays), which indicates that interaction of the enzyme with the electrode lowers overall catalysis although native behavior is retained in terms of substrate concentration dependence, pH dependence, and inhibition effects. In contrast, no catalytic activity is observed when HSO is confined to...

We demonstrate electrochemically driven catalytic voltammetry of the Mo-dependent sulfite dehydrogenase (SorT) from the -Proteobacterium Sinorhizobium meliloti with its physiological electron acceptor, the c-type cytochrome (SorU) with both proteins co-adsorbed on a chemically modified Au working electrode. Both SorT and SorU were constrained under a perm-selective dialysis membrane with the biopolymer chitosan as a co-adsorbate while the electrode was modified by a 3-mercaptopropionate self-assembled monolayer cast on the Au electrode. Cyclic voltammetry of the SorU protein reveals a well-defined quasi-reversible FeIII/II redox couple at +130 mV vs NHE in 100 mM phosphate buffer solution (pH 7.0). Introduction of wild type sulfite dehydrogenase (SorTWT) and sulfite transforms this transient SorU voltammetric response into a sigmoidal catalytic wave which increases with sulfite concentration before eventually saturating. In addition to the wild type enzyme, the variants SorTR78K, SorTR78M and SorTR78Q were also examined electrochemically in an effort to better understand the role of amino acid residue Arg78 which is in the vicinity of the Mo active site of SorT.

CO dehydrogenase (CODH) from the Gram-negative bacterium Oligotropha carboxidovorans is a complex metalloenzyme from the xanthine oxidase family of molybdenum-containing enzymes, bearing a unique binuclear Mo-S-Cu active site in addition to two [2Fe-2S] clusters (FeSI and FeSII) and one equivalent of FAD. CODH catalyzes the oxidation of CO to CO2 with the concomitant introduction of reducing equivalents into the quinone pool, thus enabling the organism to utilize CO as sole source of both carbon and energy. Using a variety of EPR monitored redox titrations and spectroelectrochemistry, we report the redox potentials of CO dehydrogenase at pH 7.2 namely MoVI/V, MoV/IV, FeSI2+/+, FeSII2+/+, FAD/FADH and FADH/FADH−. These potentials are systematically higher than the corresponding potentials seen for other members of the xanthine oxidase family of Mo enzymes, and are in line with CODH utilising the higher potential quinone pool as an electron acceptor instead of pyridine nucleotides. CODH is also active when immobilised on a modified Au working electrode as demonstrated by cyclic voltammetry in the presence of CO.

High efficient, low-cost and environmentally friendly-natured bi-functional-based perovskite electrode catalysts (BFPEC) are receiving increasing attention for oxygen reduction/oxygen evolution reaction (ORR/OER), playing an important role in the electrochemical energy conversion process using fuel cells and rechargeable batteries. Herein, we highlighted the different kinds of synthesis routes, morphological studies and electrode catalysts with A-site and B-site substitution co-substitution, generating oxygen vacancies studies for boosting ORR and OER activities. However, perovskite is a novel type of oxide family, which shows the state-of-art electrocatalytic performances in energy storage device applications. In this review article, we go through different types of BFPECs that have received massive appreciation and various strategies to promote their electrocatalytic activities (ORR/OER). Based on these various properties and their applications of BFPEC for ORR/OER, the general mechanism, catalytic performance and future outlook of these electrode catalysts have also been discussed.

Herein, we report the electrocatalytic voltammetry of holo and heme-free human sulfite oxidase (HSO) mediated by the synthetic iron complexes 1,2-bis(1,4,7-triaza-1-cyclononyl)ethane iron(III) bromide, ([Fe(dtne)]Br.3HO), potassium ferricyanide (K[Fe(CN)]), and ferrocene methanol (FM) at a 5-(4′-pyridinyl)-1,3,4-oxadiazole-2-thiol (Hpyt) modified gold working electrode. Holo HSO contains two electroactive redox cofactors, comprising a mostly negatively charged cyt b (heme) domain and a Mo cofactor (Moco) domain (the site of sulfite oxidation), where the surface near the active site is positively charged. We anticipated different catalytic voltammetry based on either repulsive or attractive electrostatic interactions between the holo or heme-free enzymes and the positively or negatively charged redox mediators. Both holo and heme-free HSO experimental catalytic voltammetry has been modeled by using electrochemical simulation across a range of sweep rates and concentrations of substrate and both positive and negatively charged electron acceptors ([Fe(dtne)], [Fe(CN)] and FM), which provides new insights into the kinetics of the HSO catalytic mechanism. These mediator complexes have almost the same redox potential (all lying in the range +415 to +430 mV vs. NHE) and, thus, deliver the same driving force for electron transfer with the Mo cofactor. However, differences in the electrostatic affinities between HSO and the mediator have a significant influence on the electrocatalytic response.

We report the first direct (unmediated) catalytic electrochemistry of a eukaryotic nitrate reductase (NR). NR from the filamentous fungus Neurospora crassa, is a member of the mononuclear molybdenum enzyme family and contains a Mo, heme and FAD cofactor which are involved in electron transfer from NAD(P)H to the (Mo) active site where reduction of nitrate to nitrite takes place. NR was adsorbed on an edge plane pyrolytic graphite (EPG) working electrode. Non-turnover redox responses were observed in the absence of nitrate from holo NR and three variants lacking the FAD, heme or Mo cofactor. The FAD response is due to dissociated cofactor in all cases. In the presence of nitrate, NR shows a pronounced cathodic catalytic wave with an apparent Michaelis constant (KM) of 39μM (pH7). The catalytic cathodic current increases with temperature from 5 to 35°C and an activation enthalpy of 26kJmol(-1) was determined. In spite of dissociation of the FAD cofactor, catalytically activity is maintained.

Mediated electrocatalytic voltammetry of human sulfite oxidase (HSO) is demonstrated with synthetic one electron transfer iron complexes bis(1,4,7-triazacyclononane)iron(III) ([Fe(tacn) 2 ] 3+ ) and 1,2-bis(1,4,7-triaza-1-cyclononyl)ethane iron(III) ([Fe(dtne)] 3+ ) at a glassy carbon working electrode. The two synthetic electron acceptors for HSO, differing in redox potential by 270 mV, deliver different driving forces for electrocatalysis. Digital simulation of the catalytic voltammetry was achieved with single set of enzyme-dependent kinetic parameters that reproduced the experimental data across a range of sweep rates, and sulfite and mediator concentrations. Amperometry carried out in a stirred solution with the lower potential mediator [Fe(tacn) 2 ] 3+ was optimised and exhibited a linear increase in steady state current in the sulfite concentration range 5.0 × 10 −6 to 8.0 × 10 −4 M with a detection limit of 0.2 pM (S/N = 3). The HSO coupled electrode was successfully used for the determination of sulfite concentration in white wine and beer samples and the results validated with a standard spectrophotometric method.

We report the first electrochemical study of a lanthanoid-dependent methanol dehydrogenase (Eu-MDH) from the acidophilic verrucomicrobial methanotroph Methylacidiphilum fumariolicum SolV with its own physiological cytochrome cGJ electron acceptor. Eu-MDH harbours a redox active 2,7,9-tricarboxypyrroloquinoline quinone (PQQ) cofactor which is non-covalently bound but coordinates trivalent lanthanoid elements including Eu3+ . Eu-MDH and the cytochrome were co-adsorbed with the biopolymer chitosan and cast onto a mercaptoundecanol (MU) monolayer modified Au working electrode. Cyclic voltammetry of cytochrome cGJ reveals a well-defined quasi-reversible FeIII/II redox couple at +255 mV vs. NHE at pH 7.5 and this response is pH independent. The reversible one-electron response of the cytochrome cGJ transforms into a sigmoidal catalytic wave in the presence of Eu-MDH and its substrates (methanol or formaldehyde). The catalytic current was pH-dependent and pH 7.3 was found to be optimal. Kinetic parameters (pH dependence, activation energy) obtained by electrochemistry show the same trends as those obtained from an artificial phenazine ethosulfate/dichlorophenol indophenol assay.

Creating well-ordered nanoporosity in biomolecules promises stability and activity, offering access to an even wider range of application possibilities. Here, the preparation of nanoporous protein films containing cytochrome c protein molecules is reported through a soft-templating strategy using polystyrene (PS) spheres of different sizes as templates. The stability of the cytochrome c film is demonstrated through electrochemistry studies to show a reusable nature of these films over a long period of time. The size of the PS spheres is varied to tune the pore diameter and the thickness of the cytochrome c films, which are quite stable and highly selective for sensing toxic acidic vapors. The fusion of the templating strategy and the self-assembly of biomolecules may offer various possibilities by generating a new series of porous biomolecules including enzymes with different molecular weights and diameters, peptides, antibodies, and DNA with interesting catalytic, adsorption, sensing, and electronic properties. Refereed/Peer-reviewed

Electrochemical biosensors convert biological events to an electrical current. To date most electrochemical biosensors exploit activities of naturally occurring enzymes. Here we demonstrated that insertion of a calmodulin domain into the redox enzyme PQQ-glucose dehydrogenase resulted in a selective Ca(2+) biosensor that could be used to rapidly measure Ca(2+) concentrations in human biological fluids. We were able to convert a point-of-care glucometer into Ca(2+) monitor by refurbishing it with the developed biosensor. We propose that similar engineering strategies may be used to create highly specific electrochemical biosensors to other analytes. Compatibility with cheap and ubiquitous amperometric detectors is expected to accelerate progression of these biosensors into clinical applications.

We report the electrocatalytic activity of ethylbenzene dehydrogenase (EBDH) from the β-proteobacterium Aromatoleum aromaticum. EBDH is a complex 155 kDa heterotrimeric molybdenum/iron–sulfur/heme protein which catalyzes the enantioselective hydroxylation of nonactivated ethylbenzene to (S)-1-phenylethanol without molecular oxygen as cosubstrate. Furthermore, it oxidizes a wide range of other alkyl-substituted aromatic and heterocyclic compounds to their secondary alcohols. Hydroxymethylferrocenium (FM) is used as an artificial electron acceptor for EBDH in an electrochemically driven catalytic system. Electrocatalytic activity of EBDH is demonstrated with both its native substrate ethylbenzene and the related substrate p-ethylphenol. The catalytic system has been modeled by electrochemical simulation across a range of sweep rates and concentrations of each substrate, which provides new insights into the kinetics of the EBDH catalytic mechanism.

We describe the catalytic voltammograms of the periplasmic arsenite oxidase (Aio) from the chemolithoautotrophic bacterium Rhizobium sp. str. NT-26 that oxidizes arsenite to arsenate. Electrochemistry of the enzyme was accomplished using its native electron transfer partner, cytochrome c552 (cyt c552), as a mediator. The protein cyt c552 adsorbed on a mercaptoundecanoic acid (MUA) modified Au electrode exhibited a stable, reversible one-electron voltammetric response at +275mV vs NHE (pH6). In the presence of arsenite and Aio the voltammetry of cyt c552 is transformed from a transient response to an amplified sigmoidal (steady state) wave consistent with an electro-catalytic system. Digital simulation was performed using a single set of parameters for all catalytic voltammetries obtained at different sweep rates and various substrate concentrations. The obtained kinetic constants from digital simulation provide new insight into the kinetics of the NT-26 Aio catalytic mechanism.