Search

Herein, a greener approach to the eosin Y-Na2 catalyzed, C(sp2 )-H bond azo coupling of imidazoheteroarene with aryl diazonium salts is described, under acid free conditions. This direct photoredox process resulted in the corresponding azo products in good to excellent yields. Besides, this new approach could also be applicable to anilines, which is a poorly reactive substrate by other methods. The main features of this reaction are that it provides high yields and is gram-scalable and applicable to biologically relevant imidazoheteroarenes and -anilines.

Herein, we report the preparation of CuO@ borophosphate nanoparticles (CuOnano@glass) and their wide catalytic applications. The glass annealing, under a controlled atmosphere, enables the growth of copper nanoparticles on the glass surface (not within) by an uncommon bottom-up process. Following the thermal annealing of metallic nanoparticles under air atmosphere, supported copper oxide nanoparticles CuONPs on the glass surface can be obtained. The approach enables the glass matrix to be explored as a precursor and a route for the synthesis of supported copper-based nanoparticles in a solvent-free process without immobilization steps or stabilizing agents. In order to demonstrate the wide synthetic utility of this CuONPs glass-based catalyst, one-pot three-component domino reactions were performed under an air atmosphere, affording the desired selenylated oxadiazoles in good to excellent yields. We also extended the application of these new materials as a glass-based catalyst in the phenol hydroxylation and the reduction of 4-nitrophenol.

Herein, we report the synthesis and characterization of fluorophores containing a 2,1,3-benzoxadiazole unit associated with a π-conjugated system (D-π-A-π-D). These new fluorophores in solution exhibited an absorption maximum at around ~419 nm (visible region), as expected for electronic transitions of the π-π* type (ε ~2.7 × 107 L mol−1 cm−1), and strong solvent-dependent fluorescence emission (ΦFL ~0.5) located in the bluish-green region. The Stokes' shift of these compounds is ca. 3,779 cm−1, which was attributed to an intramolecular charge transfer (ICT) state. In CHCl3 solution, the compounds exhibited longer and shorter lifetimes, which was attributed to the emission of monomeric and aggregated molecules, respectively. Density functional theory was used to model the electronic structure of the compounds 9a–d in their excited and ground electronic states. The simulated emission spectra are consistent with the experimental results, with different solvents leading to a shift in the emission peak and the attribution of a π-π* state with the characteristics of a charge transfer excitation. The thermal properties were analyzed by thermogravimetric analysis, and a high maximum degradation rate occurred at around 300°C. Electrochemical studies were also performed in order to determine the band gaps of the molecules. The electrochemical band gaps (2.48–2.70 eV) showed strong correlations with the optical band gaps (2.64–2.67 eV).

Glasses are a class of materials that have a multitude of uses and applications. In catalysis, they are frequently used as support materials. However, in this paper, we demonstrate that glass can be applied as an active material in catalysis. The glass was successfully applied as catalysts in bioactive bis(indolyl)methanes (BIMs) molecules with the capability to extend the reaction substrate to other N-heterocycle. Furthermore, we describe the synthesis and characterization of cheap and readily available borophosphate glass samples produced using a classical melt-quenching technique and their application as a catalyst. The main features of this glass-catalyzed reaction are high yields, recyclable catalyst, ease of scale-up to gram scale, and a solvent-free and metal-free approach.

This study involves the electrochemical, thermal and photophysical profiling of new pyromellitic diimide (PMDI) derivatives containing alkyl chains of different sizes. The photophysical investigation shows that all compounds exhibited absorption in the UV-B region (∼290 nm). The band-gaps were calculated by onset peak values of around 4.03 eV. The compounds are photoactive in the UV-A region (312–328 nm) with a small solvatochromic effect in the excited state (Δλem = 16 nm). The electrochemical studies revealed that the reduction of the bisimide moiety showed two waves due to the formation of both the radical anion and a dianion. On the other hand, oxidation showed two waves due to the formation of radical cations and dications. The thermal properties were measured by differential thermal analysis (DTA) and thermogravimetric analysis (TGA), and the materials showed high thermal stability (Td > 300 °C). Theoretical calculations were also performed to study the geometry and charge distribution of these compounds in their ground and excited electronic states. No significant changes in the absorption and emission maxima were found by changing the solvent or substituents attached to the PMDI structure.

Herein, we described the NH4I-catalyzed C H bond chalcogenation of N-heteroaryls in the presence of a minimum amount of DMSO/H2O/acetic acid as additives (2.5/2.5/1 M equiv., respectively), under metal-free conditions. Under optimized conditions, a wide variety of sulfenyl/selenyl imidazo[1,2-α]pyridines were prepared in very good yields. Moreover, the present approach was also highly efficient for the chalcogenation of different 5-membered N-heteroaryls, e.g., indole, imidazothiazole, indazole and imidazopyrimidine derivatives.

Herein, we report a greener protocol for the synthesis of 3-Se/S-indoles and imidazo[1,2-a]pyridines through direct C(sp2 )-H bond chalcogenation of heteroarenes with half molar equivalents of different dichalcogenides, using KIO3 as a non-toxic, easy-to-handle catalyst and a stoichiometric amount of glycerol. The reaction features are high yields, based on atom economy, easy performance on gram-scale, metal- and solvent-free conditions as well as applicability to different types of N-heteroarenes.

Herein, we describe a simple and efficient route to access aniline-derived diselenides and evaluate their antioxidant/GPx-mimetic properties. The diselenides were obtained in good yields via ipso-substitution/reduction from the readily available 2-nitroaromatic halides (Cl, Br, I). These diselenides present GPx-mimetic properties, showing better antioxidant activity than the standard GPx-mimetic compounds, ebselen and diphenyl diselenide. DFT analysis demonstrated that the electronic properties of the substituents determine the charge delocalization and the partial charge on selenium, which correlate with the catalytic performances. The amino group concurs in the stabilization of the selenolate intermediate through a hydrogen bond with the selenium.

We describe herein a simple, fast and inexpensive protocol for the oxidative coupling of thiols employing a stoichiometric amount of DMSO and iodine as the catalyst. Various aromatic disulfides were obtained in good to excellent yields in short reaction times at room temperature, while aliphatic disulfides were achieved in good yields when the reactions were conducted under microwave irradiation.

In this study, we developed a greener and efficient protocol for the chalcogenylation of bicyclic arenes using the I2/DMSO catalytic system under solvent- and metal-free conditions. This protocol allowed access to several chalcogenated bicyclic arenes through C(sp2)-H bond functionalization, in good to excellent yields, using MW irradiation or conventional heating.

Herein, we describe a greener protocol for the one-pot synthesis of 3-Se/S-4H-chromen-4-ones. The desired products were obtained in good to excellent yields using 2-hydroxyphenyl enaminones and half equivalents of various odorless diorganyl dichalcogenides (S/Se) in the presence of glycerol (5 molar equiv) and KIO3 (15 mol %) as the catalyst under solvent-free conditions.

This paper describes the synthesis and evaluation of new dihydropyrimidinone (DHPM)-derived selenoesters as potential multi-targeted agents for the treatment of Alzheimer's disease. A series of DHPM-derived selenoesters were obtained with high structural diversity through a short and modular synthetic route. The antioxidant activity was evaluated by TBARS and iron chelation assays. These compounds were also evaluated as acetylcholinesterase inhibitors (AChEi). The compounds demonstrated good antioxidant activity, since they presented excellent lipid peroxidation inhibition and good iron chelation activity. In addition, they showed acetylcholinesterase inhibition activity and some of them presented activity superior to that of the standard drug galantamine. The in silico predictions showed that the compound 1h may present a good pharmacokinetic profile. Therefore, the series of DHPM-derived selenoesters described herein displayed good potential for the development of antioxidant and anticholinesterasic agents in the search for new multi-targeted therapeutics for the treatment of Alzheimer's disease. (C) 2016 Elsevier Ltd. All rights reserved.

Highly efficient molecular-iodine-catalyzed chalcogenations (S and Se) of imidazo[1,2-a]pyridines were achieved by using diorganoyl dichalcogenides under solvent-free conditions. This approach afforded the desired products that had been chalcogenated regioselectively at the C3 position in up to 96 % yield by using DMSO as an oxidant, in the absence of a metal catalyst, and under an inert atmosphere. This mild, green approach allowed the preparation of different types of chalcogenated imidazo[1,2-a]pyridines with structural diversity. Furthermore, the current protocol was also extended to other N-heterocyclic cores.

A convenient metal-free and solvent-free iodine-catalyzed regioselective greener protocol to access different types of unsymmetrical chalcogenides with nitrogen- or oxygen-containing arenes through oxidative C–Se/C–S formation via direct C(sp2)–H bond activation was developed. The products were obtained in good to excellent yields using [O or N]-containing arenes, half equiv. of various odorless diorganyl dichalcogenides (S/Se), iodine (20 mol%) as the catalyst and 3 equiv. of DMSO as the oxidant, applying MW irradiation for 10 min.

In this report, the highly efficient Rose Bengal-catalysed C(sp2)-H selenylation of indoles, imidazoles and arenes was achieved using a half molar equiv. of diorganoyl diselenides. This metal-free, photo-induced protocol resulted in selenylated products in good to excellent yields. The reaction features are high yields, an atom-economic, gram-scalable and metal-free approach, and applicability to different biologically relevant (hetero)arenes.

The efficient and mild copper-catalyzed synthesis of unsymmetrical diorganyl chalcogenides under ligand- and solvent-free conditions is described. The cross-coupling reaction was performed using aryl boric acids and 0.5 equiv. of diorganyl dichalcogenides (Te/Se/S) in the presence of 3 mol % of CuI and 3 equiv. of DMSO, under microwave irradiation. This new protocol allowed the preparation of several unsymmetrical diorganyl chalcogenides in good to excellent yields.

Herein, we report a new and solvent-free methodology for the preparation of vinyl thioethers from terminal alkynes and thiols, using magnetite (Fe3O4) nanoparticles as a recyclable catalyst. With this greener method, the desired vinyl thioethers were achieved in good yields and with good stereoselectivity. In addition, the catalyst was easily recovered using a simple external magnet and reused for further catalytic reactions without significant loss of activity up to the fifth cycle.