Search

CO2 hydrogenation into valuable chemical products has attracted intensive research interest in recent years, with product selectivity control remaining an important topic that requires fine tuning of the catalytic structure and mechanistic understanding. Herein we report our study of anionic phosphorus-regulated indium oxide In2O3 (P-In2O3) nanocatalyst materials for CO2 hydrogenation and achieve nearly full-range selectivity control between methanol and CO products by means of tuning the P content. In situ DRIFTS experiments and XPS characterization reveal the importance of P anion regulation in controlling the CO2 hydrogenation pathways, with an increase in the P content resulting in a decrease in the reducibility of In2O3 that alters CO2 adsorption configuration by blocking and weakening oxygen vacancy (OV) sites for methanol generation and in the meantime creates new sites predominantly active for CO generation. This study demonstrates excellent control of the product selectivity property by regulating the catalyst composition with P anions and provides mechanistic discussions, which offers a new, effective strategy in CO2 hydrogenation catalyst research.

Mesoporous carbon (MPC) nanomaterials, with large specific surface area, excellent conductivity and stability, and effective mass transfer are beneficial for use as catalyst support in electrochemical oxygen reduction reaction (ORR) for fuel cell applications. However, MPC utilization was limited by difficulties in loading catalyst nanoparticles within the MPC pores while simultaneously controlling critical particle parameters such as size and distribution. In this study we report a new vacuum impregnation method combined with solid-state chemistry synthesis for preparing highly active ORR catalyst nanoparticles on MPC supports. We confirm the effectiveness of this method by synthesizing octahedral Pt2CuNi nanoparticles on hydrophilic MPC with an even particle distribution in the MPC pores. We also demonstrate the capability of this method in controlling the particle size and morphology by adjusting the synthesis parameters. The synthesized catalysts exhibited excellent ORR activity and promising durability, which proves the goodness of using MPC support in ORR electrocatalysis. The findings offer a new methodology for synthesizing nanoparticles in MPC pores with parameter control and provide an intriguing strategy to develop new ORR catalysts using MPC support structure.

Proximity to graphene has an extraordinary effect on the dynamics of entangled chains, as evidenced by strong slowing of thermally stimulated fluctuations at the surface of a thin supported film of polystyrene (PS) when a single layer of graphene is placed between the supporting substrate and the PS film. This slowing is due to a layer of highly viscous polymer next to the substrate being thicker for graphene (75 nm or 7.5Rg) than for silicon (13 nm or 1.3Rg). Molecular dynamics simulations of unentangled PS chain melts on silicon and on multiple layers of graphene show that the work of adhesion with graphene is roughly 4 times larger than that with silicon. In addition, PS chains adjacent to silicon readily form loops, with phenyl rings pointing predominantly toward the substrate. Chains adjacent to graphene more readily form trains, with the phenyl rings predominantly parallel to the graphene.

Designing highly active oxygen reduction reaction (ORR) catalysts is crucial to boost the fuel cell economy. Previous research has mainly focused on Pt-based alloy catalysts in which surface Pt is the solely active site and the activity improvement was challenged by the discovered scaling relationship. Herein we report a new concept of utilizing dual active sites for the ORR and demonstrate its effectiveness by synthesizing a SnO x/Pt-Cu-Ni heterojunctioned catalyst. A maximum of 40% enhancement in the apparent specific activity, which corresponds to 10-fold enhancement on interface sites, is measured compared with pure Pt-Cu-Ni. Detailed investigations suggest an altered dual-site cascade mechanism wherein the first two steps occur on SnO x sites and the remaining steps occur on adjacent Pt sites, allowing a significant decrease in the energy barrier. This study with the suggested dual-site cascade mechanism shows the potential to overcome the ORR energy barrier bottleneck to develop highly active catalysts.

Methanol synthesis via CO2 hydrogenation has attracted intensive research efforts, but is challenged with development of active and selective catalyst materials that would allow the reaction occurs under milder conditions and being economically more viable. Herein we report the use of bifunctional active sites and their synergy in promoting CO2 hydrogenation kinetics and selectivity. A series of Cu-In-Zr-O mixed oxide nanomaterials containing Cu and defective In2O3 active sites were synthesized and studied for the catalytic properties. Significantly higher CO2 conversion and methanol selectivity were achieved using the Cu-In-Zr-O compared to its non-copper counterpart In-Zr-O, revealing synergy between the two active sites. Insights into the mechanism and functionality of the two actives in CO2 hydrogenation catalysis were obtained with in situ DRIFTS study. A formate-methoxy-methanol pathway and the possible rate-limiting steps were discovered. The excellent selectivity property of the Cu-In-Zr-O was attributed to strong adsorption of CO2 to defective In2O3, which creates a large energy barrier that suppresses CO2 dissociation into CO. The promotion in CO2 hydrogenation kinetics was attributed to cooperation between the bifunctional active sites, with Cu sites adsorb and provide active hydrogen atoms that hydrogenate adsorbed CO2 at adjacent defective In2O3 sites. The findings confirmed synergy between bifunctional sites in CO2 hydrogenation catalysis and provided a new concept in development of active and selective catalyst materials.

Fine-tuning strain and vacancies in 2H-phase transition-metal dichalcogenides, although extremely challenging, is crucial for activating the inert basal plane for boosting the hydrogen evolution reaction (HER). Here, atomically curved 2H-WS2 nanosheets with precisely tunable strain and sulfur vacancies (S-vacancies) along with rich edge sites are synthesized via a one-step approach by harnessing geometric constraints. The approach is based on the confined epitaxy growth of WS2 in ordered mesoporous graphene derived from nanocrystal superlattices. The spherical curvature imposed by the graphitic mesopores enables the generation of uniform strain and S-vacancies in the as-grown WS2 nanosheets, and simultaneous manipulation of these two key parameters can be realized by simply adjusting the pore size. In addition, the formation of unique mesoporous WS2 @graphene van der Waals heterostructures ensures the ready access of active sites. Fine-tuning the WS2 layer number, strain, and S-vacancies enables arguably the best-performing HER 2H-WS2 electrocatalysts ever reported. Density functional theory calculations indicate that compared with strain, S-vacancies play a more critical role in enhancing the HER activity.

Carbon monoxide preferential oxidation (PROX) in an H2-rich stream represents one promising H2 purification technology but requires the development of active and selective catalysts to make the technology viable. We conducted density functional theory simulations of CO PROX catalysis on model Pt alloy systems to establish correlations between the catalyst parameters and the catalytic properties, which validated EA,COOR and EA,HOR as descriptors for CO oxidation and H2 oxidation kinetics, ΔEA as a descriptor for CO PROX selectivity, and ed as a catalyst parameter descriptor for the activation energy barriers. We discovered an interesting compromising relationship between the CO PROX activity and selectivity properties. Pt-Ni and Pt-Mn nanoparticle catalysts were selected for synthesis on the basis of the computational data and tested for their properties, which matched well with the DFT calculations and verified the effectiveness of the computational findings. The use of computation-guided methods and the ...

The synthesis of hierarchical lamellar zeolites with a controlled meso-/microporous morphology and acidity is an expanding area of research interest for a wide range of applications. Here, we report a one-step synthesis of a hierarchical meso-/microporous lamellar MFI–Sn/Al zeolite (i.e., containing both Lewis acidic Sn- and Al-sites and a Bronsted acidic Al–O(H)–Si site) and its catalytic application for the conversion of glucose into 5-(ethoxymethyl)furfural (EMF). The MFI–Sn/Al zeolite was prepared with the assistance of a diquaternary ammonium ([C22H45–N+(CH3)2–C6H12–N+(CH3)2–C6H13]Br2−, C22-6-6) template in a composition of 100SiO2/5C22-6-6/18.5Na2O/xAl2O3/ySnO2/2957H2O (x = 0.5, 1, and 2; y = 1 and 2, respectively). The MFI–Sn/Al zeolites innovatively feature dual meso-/microporosity and dual Lewis and Bronsted acidity, which enabled a three-step reaction cascade for EMF synthesis from glucose in ethanol solvent. The reaction proceeded via the isomerization of glucose to fructose over Lewis acidic Sn sites and the dehydration of fructose to 5-hydroxymethylfurfural (HMF) and then the etherification of HMF and ethanol to EMF over the Bronsted acidic Al–O(H)–Si sites. The co-existence of multiple acidities in a single zeolite catalyst enabled one-pot cascade reactions for carbohydrate upgrading. The dual meso-/microporosity in the MFI–Sn/Al zeolites facilitated mass transport in processing of bulky biomass molecules. The balance of both types of acidity and meso-/microporosity realized an EMF yield as high as 44% from the glucose reactant.

Giant carbon tubes (GCTs) have emerged as a new group of carbon-based material which can exhibit many interesting properties benefiting from the unique physicochemical structure and thus have aroused increasing research interest. Herein, we report a new templated growth approach for the scalable synthesis of amorphous GCTs, which had uniform wall thickness and were ultra-long in length, with the length determined by the template dimension and being demonstrated all the way up to 1 m. The GCTs significantly outperformed other carbon-based sorbents in terms of their oil sorption capacities, oil–water separation capabilities and recyclability properties, and had excellent water oxidation electrocatalysis activity. These interesting properties of the prepared GCTs were discussed to determine the underlying mechanisms and were correlated to their unique structural parameters.

Development of active and durable electrocatalyst for oxygen reduction reaction (ORR) remains one challenge for the polymer electrolyte membrane fuel cell (PEMFC) technology. Pt-based nanomaterials show the greatest promise as electrocatalyst for this reaction among all current catalytic structures. This review focuses on Pt-based ORR catalyst material development and covers the past achievements, current research status and perspectives in this research field. In particular, several important categories of Pt-based catalytic structures and the research advances are summarized. Key factors affecting the catalyst activity and durability are discussed. An outlook of future research direction of ORR catalyst research is provided.

Oxygen evolution reaction (OER) is of great significance for hydrogen production via water electrolysis, which, however, demands development of highly active, durable, and cost-effective electrocatalysts in order to stride into a renewable energy era. Herein, highly efficient and long-term durable OER by coupling B and P into an amorphous porous NiFe-based electrocatalyst is reported, which possesses an amorphous porous metallic bulk structure and high corrosion resistance, and overcomes the issues associated with currently used catalyst nanomaterials. The PB codoping in the activated NiFePB (a-NiFePB) delocalizes both Fe and Ni at Fermi energy level and enhances p-d hybridization as simulated by density functional theory calculations. The harmonized electronic structure and unique porous framework of the a-NiFePB consequently improve the OER activity. The activated NiFePB thus exhibits an extraordinarily low overpotential of 197 mV for harvesting 10 mA cm-2 OER current density and 233 mV for reaching 100 mA cm-2 under chronopotentiometry condition, with the Tafel slope harmoniously conforming to 34 mV dec-1 . Impressive long-term stability of this new catalyst is evidenced by only limited activity decay after 1400 h operation at 100 mA cm-2 . This work strategically directs a way for heading up a promising energy conversion alternative.

Understanding the growth pathway of faceted alloy nanoparticles at the atomic level is crucial to morphology control and property tuning. Yet, it remains a challenge due to complexity of the growth process and technical limits of modern characterization tools. We report a combinational use of multiple cutting-edge in situ techniques to study the growth process of octahedral Pt3Ni nanoparticles, which reveal the particle growth and facet formation mechanisms. Our studies confirm the formation of octahedral Pt3Ni initiates from Pt nuclei generation, which is followed by continuous Pt reduction that simultaneously catalyzes Ni reduction, resulting in mixed alloy formation with moderate elemental segregation. Carbon monoxide molecules serve as a facet formation modulator and induce Ni segregation to the surface, which inhibits the (111) facet growth and causes the particle shape to evolve from a spherical cluster to an octahedron as the (001) facet continues to grow., Understanding the growth pathway of faceted alloy nanoparticles at the atomic level is crucial to morphology control and property tuning, but remains a challenge. Here, the authors reveal the particle growth and facet formation mechanisms of octahedral Pt3Ni nanoparticles using multiple cutting-edge in situ techniques.

Active sites play an essential role in heterogeneous catalysis and largely determine the reaction properties. Yet identification and study of the active sites remain challenging owing to their dynamic behaviors during catalysis process and issues with current characterization techniques. This article provides a short review of research progresses in active sites of metal and metal oxide catalysts, which covers the past achievements, current research status, and perspectives in this research field. In particular, the concepts and theories of active sites are introduced. Major experimental and computational approaches that are used in active site study are summarized, with their applications and limitations being discussed. An outlook of future research direction in both experimental and computational catalysis research is provided.

The reaction mechanism and properties of a catalytic process are primarily determined by the interactions between reacting species and catalysts. However, the interactions are often challenging to be experimentally measured, especially for unstable intermediates. Therefore, it is of significant importance to establish an exact relationship between chemical–catalyst interactions and catalyst parameters, which will allow calculation of these interactions and thus advance their mechanistic understanding. Herein we report the description of adsorption energy on transition metals by considering both ionic bonding and covalent bonding contributions and introduce the work function as one additional responsible parameter. We find that the adsorption energy can be more accurately described using a two-dimensional (2D) polynomial model, which shows a significant improvement compared with the current adsorption energy–d-band center linear correlation. We also demonstrate the utilization of this new 2D polynomial model to calculate oxygen binding energy of different transition metals to help understand their catalytic properties in oxygen reduction reactions.