Search

The estimation of forest residual biomass is of interest to assess the availability of green energy resources. This study relates the Pinus halepensis Miller forest residual biomass (FRB), estimate...

Fuel type is one of the key factors for analyzing the potential of fire ignition and propagation in agricultural and forest environments. The increase of three-dimensional datasets provided by active sensors, such as LiDAR (Light Detection and Ranging), has improved the classification of fuel types through empirical modelling. Empirical methods are site and sensor specific while Radiative Transfer Models (RTM) approaches provide broader universality. The aim of this work is to analyze the suitability of Discrete Anisotropic Radiative Transfer (DART) model to replicate low density small-footprint Airborne Laser Scanning (ALS) measurements and subsequent fuel type classification. Field data measured in 104 plots are used as ground truth to simulate LiDAR response based on the sensor and flight characteristics of low-density ALS data captured by the Spanish National Plan for Aerial Orthophotography (PNOA) in two different dates (2011 and 2016). The accuracy assessment of the DART simulations is performed using Spearman rank correlation coefficients between the simulated metrics and the ALS-PNOA ones. The results show that 32% of the computed metrics overpassed a correlation value of 0.80 between simulated and ALS-PNOA metrics in 2011 and 28% in 2016. The highest correlations were related to high height percentiles, canopy variability metrics as for example standard deviation and Rumple diversity index, reaching correlation values over 0.94. Two metric selection approaches and Support Vector Machine classification method with variants were compared to classify fuel types. The best-fitted classification model, trained with the DART simulated sample and validated with ALS-PNOA data, was obtained using Support Vector Machine method with radial kernel. The overall accuracy of the classification after validation was 88% and 91% for the 2011 and 2016 years, respectively. The use of DART demonstrates its value for simulating generalizable 3D data for fuel type classification providing relevant information for forest managers in fire prevention and extinction.

Made available in DSpace on 2020-12-12T01:34:32Z (GMT). No. of bitstreams: 0 Previous issue date: 2020-11-01 Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Fire severity assessment is crucial for predicting ecosystem response and prioritizing post-fire forest management strategies. Although a variety of remote sensing approaches have been developed, more research is still needed to improve the accuracy and effectiveness of fire severity mapping. This study proposes a unitemporal simulation approach based on the generation of synthetic spectral databases from linear spectral mixing. To fully exploit the potential of these training databases, the Random Forest (RF) machine learning algorithm was applied to build a classifier and regression model. The predictive models parameterized with the synthetic datasets were applied in a case study, the Sierra de Luna wildfire in Spain. Single date Landsat-8 and Sentinel-2A imagery of the immediate post-fire environment were used to develop the validation spectral datasets and a Pléiades orthoimage, providing the ground truth data. The four defined severity categories – unburned (UB), partial canopy unburned (PCU), canopy scorched (CS), and canopy consumed (CC) – demonstrated high accuracy in the bootstrapped (about 95%) and real validation sets (about 90%), with a slightly better performance observed when the Sentinel-2A dataset was used. Abundance of four ground covers (green vegetation, non-photosynthetic vegetation, soil, and ash) was also quantified with moderate (~45% for NPV) or high accuracy (higher than 75% for the remaining covers). No specific pattern in the comparison of sensors was observed. Variable importance analysis highlighted the complementary behavior of the spectral bands, although the contrast between the near and shortwave infrared regions stood out above the rest. Comparison of procedures reinforced the usefulness of the approach, as RF image-derived models and the multiple endmember spectral unmixing technique (MESMA) showed lower accuracy. The capabilities for detailed mapping are reflected in the development of different types of cartography (classification maps and fraction cover maps). The approach holds great potential for fire severity assessment, and future research needs to extend the predictive modeling to other burned areas – also in different ecosystems – and analyze its competence and the possible adaptations needed. Department of Geography and Spatial Management University of Zaragoza, C/Pedro Cerbuna 12 GEOFOREST-IUCA research group Environmental Sciences Institute (IUCA) University of Zaragoza, C/Pedro Cerbuna 12 Lab of Vegetation Ecology Instituto de Biociências Universidade Estadual Paulista (UNESP), Avenida 24-A 1515 Centro Universitario de la Defensa de Zaragoza Academia General Militar, Ctra. Huesca s/n Lab of Vegetation Ecology Instituto de Biociências Universidade Estadual Paulista (UNESP), Avenida 24-A 1515 FAPESP: 2019/07357-8

The aim of study is to map the carbon dioxide (CO2) emission of the aboveground tree biomass (AGB) in case of a fire event. The suitability of low point density, discrete, multiple-return, Airborne...

Mediterranean forests are recurrently affected by fire. The recurrence of fire in such environments and the number and severity of previous fire events are directly related to fire risk. Fuel type classification is crucial for estimating ignition and fire propagation for sustainable forest management of these wildfire prone environments. The aim of this study is to classify fuel types according to Prometheus classification using low-density Airborne Laser Scanner (ALS) data, Sentinel 2 data, and 136 field plots used as ground-truth. The study encompassed three different Mediterranean forests dominated by pines (Pinus halepensis, P. pinaster y P. nigra), oaks (Quercus ilex) and quercus (Q. faginea) in areas affected by wildfires in 1994 and their surroundings. Two metric selection approaches and two non-parametric classification methods with variants were compared to classify fuel types. The best-fitted classification model was obtained using Support Vector Machine method with radial kernel. The model includes three ALS and one Sentinel-2 metrics: the 25th percentile of returns height, the percentage of all returns above mean, rumple structural diversity index and NDVI. The overall accuracy of the model after validation was 59%. The combination of data from active and passive remote sensing sensors as well as the use of adapted structural diversity indices derived from ALS data improved accuracy classification. This approach demonstrates its value for mapping fuel type spatial patterns at a regional scale under different heterogeneous and topographically complex Mediterranean forests.

Fire severity can be assessed by identifying and quantifying the fractional abundance of post-fire ground cover types, an approach with great capacity to predict ecosystem response. Focused on shrubland formations of Mediterranean-type ecosystems, three burned areas (Ibieca and Zuera wildfires and Penaflor experimental fire) were sampled in the summers of 2006 and 2007. Two different ground measurements were made for each of the 356 plots: (i) 3-band high spatial resolution photography (HSRP) and (ii) the hemispherical-conical reflectance factor (HCRF) in the visible to near-infrared spectral range (VNIR, 400–900 nm). Stepwise multiple lineal regression (SMLR) models were fitted to spectral variables (HCRF, first derivative spectra or FDS, and four absorption indices) to estimate the fractional cover of seven post-fire ground cover types (vegetation and soil – unburned and charred components – and ash – char and ash, individually and as a combined category). Models were developed and validated at the Penaflor site (training, n = 217; validation, n = 88) and applied to the samples from the Ibieca and Zuera sites (n = 51). The best results were observed for the abundance estimations of green vegetation ( R adj . 2 0.70–0.90), unburned soil ( R adj . 2 0.40–0.75), and the combination of ashes ( R adj . 2 0.65–0.80). In comparison of spectral data, FDS outperforms reflectance or absorption data because of its higher accuracy levels and, importantly, its greater capacity to yield generalizable models. Future efforts should be made to improve the estimation of intermediate severity levels and upscaling the developed models. In the context of fire severity assessment, our study demonstrates the potential of hyperspectral data to estimate in a quick and objective manner post-fire ground cover fractions and thus provide valuable information to guide management responses.

The aim of this study is the estimation of forest residual biomass (FRB) in Mediterranean Pinus halepensis Miller forests. Two regression methods were compared in order to relate the FRB estimated in 45 field plots, to several independent variables derived from low-density Airborne Laser Scanning (ALS) data. The leave-one-out cross-validation technique demonstrated that Support Vector Machine (SVM) model with radial kernel, including the 40th percentile of the return heights, the variance and the percentage of first returns above mean as the selected variables, provided the most accurate result (root mean square error of 2.73 tons/ha). This study confirms the usefulness of low-density ALS data to accurately estimate FRB to better assess the availability of organic renewable fuel energy in the Mediterranean environment.

The account of total biomass can assist with the evaluation of climate regulation policies from local to global scales. This study estimates total biomass (TB), including tree and shrub biomass fractions, in Pinus halepensis Miller forest stands located in the Aragon Region (Spain) using Airborne Laser Scanning (ALS) data and fieldwork. A comparison of five selection methods and five regression models was performed to relate the TB, estimated in 83 field plots through allometric equations, to several independent variables extracted from ALS point cloud. A height threshold was used to include returns above 0.2 m when calculating ALS variables. The sample was divided into training and test sets composed of 62 and 21 plots, respectively. The model with the lower root mean square error (15.14 tons/ha) after validation was the multiple linear regression model including three ALS variables: the 25th percentile of the return heights, the variance, and the percentage of first returns above the mean. This study confirms the usefulness of low-density ALS data to accurately estimate total biomass, and thus better assess the availability of biomass and carbon content in a Mediterranean Aleppo pine forest.

Atmospheric correction of optical satellite imagery is an essential pre-processing for modelling biophysical variables, multi-temporal analysis, and digital classification processes. Sentinel-2 products available for users are distributed by the European Space Agency (ESA) as Top Of Atmosphere reflectance values in cartographic geometry (Level-1C product). In order to obtain Bottom Of Atmosphere reflectance images (Level-2A product) derived from this Level-1C products, ESA provides the SEN2COR module, which is implemented in the Sentinel Application Platform. Alternatively, ESA recently distributes Level-2A products processed by SEN2COR with a default configuration. On the other hand, the conversion from Level-1C to Level-2A product can be generated using alternative atmospheric correction methods, such as MAJA, 6S, or iCOR. In this context, this paper aims to evaluate the quality of Level-2A products obtained through different methods in Mediterranean shrub and grasslands by comparing data obtained from Sentinel-2 imagery with field spectrometry data. For that purpose, six plots with different land covers (asphalt, grass, shrub, pasture, and bare soil) were analyzed, by using synchronous imagery to fieldwork (from July to September 2016). The results suggest the suitability of the applied atmospheric corrections, with coefficients of determination higher than 0.90 and root mean square error lower than 0.04 achieving a relative error in bottom of atmosphere reflectance of only 2–3%. Nevertheless, minor differences were observed between the four tested methods, with slightly varying results depending on the spectral band and land cover. This work has been supported by the SynerTGE project (CGL2015-69095-R), funded by the Spanish Ministry of Economy and Competitiveness; the HyZCP project (2015-17), funded by the Centro Universitario de la Defensa de Zaragoza, and projects CGL2016-75217-R (MINECO/FEDER, EU) and PyrenEOS EFA 048/15, which has been 65% cofinanced by the European Regional Development through the Interreg V-A Spain-France-Andorra programme (POCTEFA 2014-2020).