Search

Fluvial morphology is affected by a wide range of forcing factors, which can be external, such as faulting and changes in climate, or internal, such as variations in rock hardness or degree of fracturing. It is a challenge to separate internal and external forcing factors when they are co-located or occur coevally. Failure to account for both factors leads to potential misinterpretations. For example, steepening of channel network due to lithologic contrasts could be misinterpreted to be a function of increased tectonic displacements. These misinterpretations are enhanced over large areas, where landscape properties needed to calculate channel steepness (e.g. channel concavity) can vary significantly in space. In this study, we investigate relative channel steepness over the Eastern Carpathians, where it has been proposed that active rock uplift in the Southeastern Carpathians gives way N- and NW-wards to ca. 8 Myrs of post-orogenic quiescence. We develop a technique to quantify relative channel steepness, the relative steepness index, based on a wide range of concavities, and show that the main signal shows an increase in relative steepness index from east to west across the range. Rock hardness measurements and geological studies suggest this difference is driven by lithology. When we isolate channel steepness by lithology to test for ongoing rock uplift along the range, we find steeper channels in the south of the study area compared to the same units in the North. This supports interpretations from longer timescale geological data that active rock uplift is fastest in the southern Southeastern Carpathians.

We provide lithological, sedimentological and micropalaeontological descriptions of 39 sections and boreholes crossing the upper Miocene deposits of the Rifian Corridor. These deposits represent the sedimentary remnants of the marine gateway that connected the Atlantic to the Mediterranean in the late Miocene. Results from these 39 sites were adopted to reconstruct the palaeogeographic evolution of the gateway presented in the associated research article (Capella et al., 2018) [1]. For each outcrop we present a synthesis of field observations, lithofacies, key sedimentological features, planktic and benthic assemblages.

Recent studies imply that the formation and evolution of many SE Asian basins was driven by extensional detachments or systems of low-angle normal faults that created significant crustal exhumation in their footwalls. In this context, the architecture of the Triassic Indosinian orogen presently exposed in Peninsular Malaysia is compatible with significant extension post-dating the orogenic event. In this study we performed a kinematic analysis based on fieldwork and microstructural observations in the Taku Schist, Kemahang granite and the surrounding Gua Musang sediments of northern Peninsular Malaysia in order to shed light on processes related to the build-up and subsequent demise of the Indosinian orogen. The first three phases of deformation were related to an overall period of E–W oriented contraction and burial metamorphism. These phases of deformation are characterized by isoclinal folding with flat lying axial plane cleavages (D1), asymmetrical folding, top-to-the-W–SW shearing (D2) and upright folding (D3). All are in general agreement with observations of the previously inferred Permo–Triassic Indosinian orogeny. During these times, the Taku Schist, a sequence of Paleozoic clastic sediments with mafic intercalations was metamorphosed to amphibolite facies. These rocks are most likely equivalent to the ones exposed in the Bentong–Raub suture zone. Structural relations suggest that the Triassic Kemahang pluton is syn-kinematic, which provides important constraints for the timing of these contractional events. We demonstrate that the overall shortening was followed by a hitherto undescribed extension in NW–SE direction resulting in the formation of a large-scale detachment, the Taku detachment, in northern Peninsular Malaysia. Extension probably reactivated the former subduction plane as a detachment and exhumed previously buried and metamorphosed rocks of similar lithological composition to the neighboring Bentong–Raub suture zone. Such a mechanism is similar to that observed in other regions, such as the Aegean, Apennines, Dinarides or the Betics–Rif system, where exhumation of (high-pressure) metamorphic rocks is largely controlled by detachments or low angle normal shear/fault systems.

In contractional (subduction/collisional) settings, convergence is accommodated by the formation of thin- and thick-skinned thrust and fold belts. The transmission of such deformation over larger distances into orogenic foreland areas is influenced by the inherited rheological characteristics of continental lithosphere. Lateral rheological variations parallel to the strike of continental foreland areas creates contrasting geometries and sequences of deformation that interact during orogenic build-up. We investigate the far-field transmission of strain within a continental lithosphere characterized by a laterally variable rheology through physical analogue modelling. Rheological weak crustal zones were introduced at distance from an advancing backstop to study the progressive along strike linkage and interference of structures during contraction. The results reveal that rheologically weak crustal zones localise far-field contractional deformation. When the size of weak zones, by means of their horizontal extend to depth ratio, is large, deformation localises at the boundaries of the weak zone where they lead to the formation of large-offset faults. Subsequently the faults migrate along-strike into areas that are rheologically stronger. When the size of the weak zone is reduced, a large-scale contractional step-over forms in orogenic forelands, where rheologically contrasting domains transmit out-of-sequence deformation by a gradual migration of thrust offsets and fold amplitudes along their strike. These results show that crustal scale orogenic step-overs do not always reflect variations in the geometry of the plate boundary (indenter) or along-strike gradients in shortening rates. Such features may also form in response to variations in rheology, as the ones created by inherited extensional basins situated at large distances from plate boundaries in the orogenic foreland.

The Rifian Corridor was one of the Mediterranean–Atlantic seaways that progressively restricted and caused the Messinian Salinity Crisis (MSC). Many key questions concerning the controls on the onset, progression and termination of the MSC remain unanswered mainly because the evolution of these seaways is poorly constrained. Uncertainties about the age of restriction and closure of the Rifian Corridor hamper full understanding of the hydrological exchange through the MSC gateways: required connections to sustain transport of salt into the Mediterranean for the primary-lower gypsum and halite stages. Here we present integrated surface-subsurface palaeogeographic reconstructions of the Rifian Corridor with improved age-control. Information about age and timing of the closure have been derived from high-resolution biostratigraphy, palaeoenvironmental indicators, sediment transport directions, and the analysis of published onshore subsurface (core and seismic) datasets. We applied modern taxonomic concepts to revise the biostratigraphy of the Rifian Corridor and propose astronomically-tuned, minimum-maximum ages for its successions. Finally, we summarise the palaeogeographic evolution in four time slices corresponding to the middle Tortonian (10.57–8.37), late Tortonian (8.37–7.25 Ma), early Messinian (7.25–6.35 Ma), and late Messinian (6.35–5.33 Ma). Several successions record the closure of the corridor via a continuous marine to continental-lacustrine transition. The youngest dated marine sediments represent a good approximation of the age of seaway closure. The closure of the South Rifian Corridor is constrained to 7.1–6.9 Ma; that of the North Rifian Corridor is more uncertain and ranges from 7.35 to ca. 7 Ma. We conclude that the Rifian Corridor was already closed in the early Messinian and did not contribute to the restriction events that resulted in the MSC. Because the Betic Corridor is also closed by the early Messinian, the modern Gibraltar Straits remain the sole option in the Western Mediterranean as last Messinian seaway that was open during the MSC. Our results imply that the Gibraltar Straits could have been established as the exclusive Mediterranean-Atlantic portal already in the late Miocene, and therefore we suggest that future field and drilling campaigns should target the Alboran Sea and the Gibraltar region to investigate water exchange before and during the Messinian Salinity Crisis and its impact on Atlantic circulation and global climate.

Fragmentation of large continental areas by post-orogenic extension requires favourable geodynamic conditions and frequently occurs along pre-existing suture zones or nappe contacts, as exemplified by the Stong and Taku magmatic and metamorphic complexes of northern Peninsular Malaysia. For this case, we have employed a field and microstructural kinematic study combined with low temperature thermo-chronology to analyse the tectonic and exhumation history. The results show that the Late Palaeozoic - Triassic Indosinian orogeny created successive phases of burial related metamorphism, shearing and contractional deformation. This orogenic structure was subsequently dismembered during a Cretaceous thermal event that culminated in the formation of a large scale Late Santonian - Early Maastrichtian extensional detachment, genetically associated with crustal melting, the emplacement of syn-kinematic plutons and widespread migmatisation. The emplacement of these magmatic rocks led to an array of simultaneously formed structures that document deformation conditions over a wide temperature range, represented by amphibolite- and greenschist- facies mylonites and as well as brittle structures, such as cataclastic zones and normal faults that formed during exhumation in the footwall of the detachment. The formation of this detachment and a first phase of Late Cretaceous cooling was followed by renewed Eocene - Oligocene exhumation, as evidenced from our fission track ages. We infer that an initial Cretaceous thermal anomaly was responsible for the formation of an extensional gneiss dome associated with simple shear and rotation of normal faults. These Cretaceous processes played a critical role in the establishment of the presently observed crustal structure of Peninsular Malaysia.

Extensional basins often show along-strike variability in terms of fault geometries, basement structures, subsidence, and thermal evolution. This is particularly pronounced when extension reactivates preexisting suture zones with opposing dip directions, that is, opposite polarities, which creates wide strike-slip transfer zones. We have studied this extensional variability by means of thermomechanical lithospheric-scale 3-D numerical modeling. We conducted a series of experiments to model the extension of a thick lithosphere simulating a young orogenic area containing segmented suture zones inherited from former opposing subduction polarities, implemented as rheologically weak inclined layers with opposite dips. Numerical experiments demonstrate that the initial subduction sutures are reactivated by two long-lived lithospheric-scale detachment faults, which remain active until the onset of oceanic spreading. The opposite polarity of these faults causes their migration toward each other by asymmetric mantle lithosphere extension and thermal accretion. Crustal kinematics shows the formation of extensional detachment faults and high-offset listric normal faults. These structures undergo gradual tilting during their footwall exhumation, while the rheological weak suture layers are redistributed beneath the crust. The results demonstrate an active interaction along the strike of the system between the two opposite dipping weak zones, where fault segments mechanically interact. During extension, the maximum horizontal fault offset switches the apparent sense of shear in the separating strike-slip transfer zone. This kinematics explain the rapid change in the sense of shear in major strike-slip transfer zones or transform faults, such as observed during the extension of the Pannonian back-arc basin.

During the last decade, the interaction of deep processes in the lithosphere and mantle with surface processes (erosion, climate, sea-level, subsidence, glacio-isostatic readjustment) has been the subject of heated discussion. The use of a multidisciplinary approach linking geology, geophysics, geodesy, modelling, and geotechnology has led to the awareness of coupled deep and surface processes. Deep earth dynamics (topography, erosion, tectonics) are strongly connected to natural hazards such as earthquakes, landslides, and tsunamis; sedimentary mass transfers have important consequences on isostatic movements and on georesources, geothermal energy repartitions. The ability to read and understand the link between deep Earth dynamics and surface processes has therefore important societal impacts. Ground-truthing at carefully-selected sites of investigation is imperative to better understand these connections. Due to its youth (, The work in the Gulf of Lion and long-term drilling project, including offshore cruises, has been supported by CNRS, IFREMER, IFPEN, BRGM, EDROME, IUEM, the french alliance (Allenvi and Ancre), CNFH (Commission National de la Flotte Hauturi ere Française) and different national and international Programs: Actions Marges, MISTRALS-Termex, Labex Mer (ANR-10-LABX-19), CNRS-INSU SYSTER, CNRS-INSU INTERRVIE, ARTEMIS, MAGELLAN þ European Program, TOPO-EUROPE and ILP (International Lithosphere Program), TECLA CGL2011-26670, RCMNS, IODP-France, ECORD, JSPS, JAMSTEC and CDEX and IODP

The relationship between magma generation and the tectonic evolution of orogens during subduction and subsequent collision requires self-consistent numerical modelling approaches predicting volumes and compositions of the produced magmatic rocks. Here, we use a 2D magmatic-thermomechanical numerical modelling procedure to analyse rapid subduction of a narrow ocean, followed by Mediterranean style collision, which is characterized by the gradual accretion of lower plate material and slab migration towards the orogenic foreland. Our results suggest that magmatism has a large-scale geodynamic effect by focusing deformation throughout the entire subduction and collision process. The rheological structure and compositional layering of the crust impose a key control on the distribution of magmatic rocks within the orogen. Compared to previous simplified homogeneous crustal models, a compositionally layered crust causes an increase in felsic material influx during continental collision and results in shallower magmatic sources that migrate with time towards the foreland. Changes in the deformation style may be locally driven by magma emplacement rather than by slab movement. Our modelling also demonstrates that the migration pattern of the deformation front and the magmatic arc relative to the location of the suture zone may be driven by lower crustal indentation in the overriding plate during early stages of collision. The modelling predicts a gradual change in magma source composition with time from typical calc-alkaline to ones associated with relamination and eduction during subduction, collision and slab detachment. This transition explains the compositional changes of magma their temporal and spatial migration, as well as the observed link with deformation in the Dinarides orogen of Central Europe selected as a case study.

The tectonic evolution of sedimentary basins is the intrinsic result of the interplay between lithospheric stresses, lithospheric rheology, and thermal perturbations of the lithosphere–upper mantle system. The thermomechanical structure of the lithosphere exerts a prime control on its response to basin-forming mechanisms, in both extension and compression. Tectonic reactivation has strongly affected the structure and fill of many sedimentary basins. The long-lasting rheological memory of the lithosphere appears to play a far more important role in basin reactivation than hitherto assumed. The temporal evolution of the strength of continents and the spatial variations in stress and strength at continental margins, rifts, and orogenic belts govern the mechanics of basin development in time and space. Polyphase deformation is a common feature of many sedimentary basin systems. Compressional reactivation of extensional basins during their postrift phase appears to occur in many intraplate rifts and passive margins, reflecting temporal and spatial changes in the orientation and magnitude of the intraplate stress regime. Similarly, foreland basins are frequently characterized by preorogenic extension. The actual subsidence patterns of these polyphase systems are often more complex than predicted by end-member models that only consider the basin formation mechanism. Folding of the lithosphere, involving positive and negative deflections, appears to be of more importance in the large-scale deformation of intraplate domains than hitherto realized. In the intraplate domain of continental Europe that was thermally perturbed by Cenozoic upper mantle plume activity, lithospheric folding, for instance, plays an important role and strongly affects the pattern of vertical motions, in terms of both the basin subsidence and the uplift of broad arches. Tectonic processes operating during basin formation and during the subsequent deformation of basins can generate significant differential topography in basin systems. In view of the close link between erosion of topographic highs and sedimentation in subsiding areas, constraints are needed on uplift and coeval subsidence to validate quantitative process-oriented models for the evolution of sedimentary basins. Integration of analog and numerical modeling provides a novel approach to assess the feedback mechanisms between deep mantle, lithospheric, and surface processes.