Search

At the present time, there is a growing interest in additive manufacturing (AM) technologies and their integration into current process chains. In particular, the implementation of AM for tool production in micro injection molding (µ-IM), a well-established process, could introduce many advantages. First of all, AM could avoid the need for the time-consuming and expensive fabrication of molds for small series of customized products. In this work, the feasibility, quality, and reliability of an AM/µ-IM process chain were evaluated by designing and fabricating mold inserts for µ-IM by stereolithography (SLA) technology, the mold inserts were characterized and tested experimentally. The selected geometry is composed of four thin cavities: This particular feature represents an actual challenge for both the SLA and µ-IM perspective due to the large surface-to-volume ratio of the cavity. Two different materials were used for the mold fabrication, showing sharply different performance in terms of endurance limit and cavity degradation. The obtained results confirm that the µ-IM process, exploiting an SLA fabricated mold insert, is feasible but requires great accuracy in material choice, mold design, fabrication, and assembly.

Micro-applications, especially in biomedical and optical sectors, require the fabrication of thin polymeric parts which can be commonly realized by micro-injection molding process. However, this process is characterized by a relevant constraint regarding the tooling. Indeed, the design and manufacturing of molds could be a very time-consuming step and so, a significant limitation for the rapid development of new products. Moreover, if the design displays challenging microfeatures, their realization could involve the use of more than one mold for the fabrication of a single thin part. Therefore, proper integration of different manufacturing microtechnologies may represent an advantageous method to realize such polymeric thin microfeatures. In this work, a micromanufacturing process chain including stereolithography, micromilling, and micro-injection molding is reported. The mold for the micro-injection molding process was fabricated by means of stereolithography and micromilling, which allowed us to produce low-cost reconfigurable modular mold, composed of insert support and a removable insert. The assessment of the proposed process chain was carried out by evaluating the dimensions and the surface finishing and texturing of the milled mold cavities and molded components. Finally, a brief economic analysis compares three process chains for fabricating the micromold showing that the proposed one reduces the manufacturing cost by almost 61% with the same production time.

This paper discusses the performance of micro-electro-discharge machining (micro-EDM) process using different flushing media. Several tests have been performed considering a hardened steel thin workpiece machined via micro-EDM drilling and through-trench and different flushing fluids: deionized water, tap water, deionized water with Garnet, tap water with Garnet. Garnet is the abrasive material exploited in the micro-AWJ and the concentration per liter of water considered in micro-EDM experiments is the same as required in micro-abrasive water jet (micro-AWJ) machining. A customized system has been built on micro-EDM Sarix SX 200 HP machine to allow the water-based fluid refill and liquid level monitoring during the experiments. The micro-EDM trials have been carried out considering two machining regimes, roughing and semi finishing. The different water-based fluids have different electrical conductivities, which lead to different machining performance. Material removal rate (MRR) and tool wear ratio (TWR) have been estimated in terms of average and standard deviation. The results show that the presence of Garnet does not affect MRR consistently, since the particles do not play an active role in the erosion process but affect surface quality, as proved by the inspection of crater morphology and dimensions estimation performed via confocal microscope. For the considered experiments, MRR is generally increased as the conductivity decreases, in particular when semi-finishing regime is used. Also TWR decreases dramatically with the use of water-based fluids, since a protective recast layer is also deposited on the tool tip preventing wearing. Our analysis shows that micro-EDM can be successfully performed using the same liquid (water and abrasive) used in micro-AWJ, and so paves the way towards the implementation of a hybrid process based on micro-AWJ and micro-EDM technologies.

Measuring 3D micro-features is a challenging task that is usually performed using high-cost systems generally based on technologies with narrow working ranges and very accurate control of the sensor positions. Well-known image analysis methods, such as Photogrammetry, would likely lower the costs of 3D inspection of micro-features and add texture information to the 3D models; however, the behaviour of Photogrammetry is strongly affected by the scaling method because it retrieves a model that must be scaled after its computation. In this paper, an experimental study of the validity of a hybrid 3D image processing method for measuring micro-features is presented. This method exploits the Depth-from-Focus method to retrieve the correct scale for a photogrammetric model. The measurement of properly-designed and manufactured specimens was performed by following and adapting the German guideline VDI/VDE 2634, Part 3 to validate the method using calibrated specimens. The proposed system has been demonstrated to be very promising can achieve an error of less than 10 μm.

In fused deposition modeling (FDM) process, several uncertainty sources contribute to low accuracy and bad surface finishing. Besides intrinsic uncertainties, other factors, related to the machine structure and actuation, participate to increase complexity and reduce the controllability of the process. On-board vision systems can be successfully exploited to monitor the deposition process and to acquire quantitative information on geometry and transients. This information can be used to calibrate the process parameters where a compensation strategy is implemented. In this paper, a low-cost vision system capable of microscopic acquisitions is integrated into an FDM machine and image-processing techniques are exploited to define calibration procedures to improve the process accuracy, thus extending the use of this equipment to micromanufacturing applications. The effectiveness of the integration is evaluated through the fabrication of a microfluidic device.

The capability to manufacture high-precision components with microscale features is enhanced by the combination of different micromanufacturing processes in a single process chain. This study explores an effective process chain that combines micro-abrasive water jet (μ-AWJ) and microwire electrical discharge machining (μ-WEDM) technologies. An experimental spring component is chosen as a leading test case, since fine geometric features machining and low roughness on the cut walls are required. The advantages deriving from the two technologies combination are discussed in terms of machining time, surface roughness, and feature accuracy. First, the performances of both processes are assessed by experimentation and discussed. Successively, different process chains are conceived for fabricating two test cases with different sizes, displaying some useful indications that can be drawn from this experience.

In this paper, the effect of the micro-electro discharge machining (EDM) milling machinability of Si3N4–TiN workpieces was investigated. The material removal rate (MRR) and tool wear rate (TWR) were analyzed in relation to discharge pulse types in order to evaluate how the different pulse shapes impact on such micro-EDM performance indicators. Voltage and current pulse waveforms were acquired during micro-EDM trials, scheduled according to a Design of Experiment (DOE), then, a pulse discrimination algorithm was used to post-process the data off-line and discriminate the pulse types as short, arc, delayed, or normal. The analysis showed that, for the considered process parameter combinations, MRR was sensitive only to normal pulses, while the other pulse types had no remarkable effect on it. On the contrary, TWR was affected by normal pulses, but the occurrence of arcs and delayed pulses induced unexpected improvements in tool wear. Those results suggest that micro-EDM manufacturing of Si3N4–TiN workpiece is relevantly different from the micro-EDM process performed on metal workpieces such as steel. Additionally, the inspection of the Si3N4–TiN micro-EDM surface, performed by SEM and EDS analyses, showed the presence of re-solidified droplets and micro-cracks, which modified the chemical composition and the consequent surface quality of the machined micro-features.

The surface to volume ratio in micro injection molding is quite large and this makes interfacial phenomena particularly crucial for the effectiveness of the process. This criticality is more evident for thin parts molding, where the influence of roughness on the thermal boundary conditions is not negligible. In this case, the contact between polymer and mold significantly affects the heat transfer at the interface and consequently it strongly influences the polymer melt flow behavior. In this paper, the effects of the polymer-mold interface on polymer flow were experimentally investigated. In particular, the filling of a representative micro part with a thickness of 100 μm was studied in relation to surface roughness and mold wettability. The results showed that the state of the polymer-mold interface plays a fundamental role in the filling of thin-wall micro injection molding. In particular, the flow length increases with both the mold roughness and the contact angle between the molten polymers and the cavity surface.

Microinjection moulding combined with the use of removable inserts is one of the most promising manufacturing processes for microfluidic devices, such as lab-on-chip, that have the potential to revolutionize the healthcare and diagnosis systems. In this work, we have designed, fabricated and tested a compact and disposable plastic optical stretcher. To produce the mould inserts, two micro manufacturing technologies have been used. Micro electro discharge machining (&micro, EDM) was used to reproduce the inverse of the capillary tube connection characterized by elevated aspect ratio. The high accuracy of femtosecond laser micromachining (FLM) was exploited to manufacture the insert with perfectly aligned microfluidic channels and fibre slots, facilitating the final composition of the optical manipulation device. The optical stretcher operation was tested using microbeads and red blood cells solutions. The prototype presented in this work demonstrates the feasibility of this approach, which should guarantee real mass production of ready-to-use lab-on-chip devices.

The aim of the present study is the assessment of the integration of a low cost optical measurement device into a high-precision machine tool for micro manufacturing applications. The measurement system can be effectively integrated into the working volume of different types of machines allowing both tool and workpiece measurements and avoiding its disassembly from the machine stage for off-line measurements and, consequently, reference losses. The fast measurements of tool and workpiece during the machining contribute to increase the accuracy and reduce the overall machining-measurement iterations. The assessment is achieved by a test case where a low cost USB microscope is applied to a micro-EDM machine. The low cost device has been applied for tool electrode measurements and tool wear evaluation after an accuracy enhanced calibration procedure and high performance image processing algorithms, which effectively reduce the lack of the hardware performance. The measurement performance gives a feedback on the deviations of the machined features from nominal geometry and allows their compensations by an adequate machining strategy.

Due to its ability to produce low-cost and high repeatable micro-polymeric parts, micro-injection molding is emerging as one of the most promising enabling technologies in many different fields. When approaching the micro-scale, different issues related to the process should be addressed, especially as the thickness of the cavities becomes very thin. In particular, the mold roughness affects the surface quality of the micro-components produced, like in macro-molding, but this could also encompass the complete filling of the parts. The main objective of the present paper is to evaluate the roughness influence of the mold on the non-Newtonian fluid flow during the micro-injection process in thin micro-cavities where the mold surface condition could affect the process due to the phenomena neglected in macro- or mesoscale as less important boundary conditions. The part design was properly conceived in order to neglect the effect of dimensions and geometry and to highlight the roughness contribution during the filling phase. The experimentation was performed using cavities with different roughness values and decreasing depths from 200 to 50 μm, considerably lower than 250 μm found in literature and manufactured by the micro-electrical discharge machining (μ-EDM). The results of the experiments are discussed and show that cavity-surface roughness affects the process as the molding scale is decreased. In particular, in thin cavities, higher surface roughness promotes the filling of component.

In spite of significant improvements in micro-replication techniques, methods to fabricate well-defined net shape microstructures are still in a developing stage. Soft lithography has the capability to manufacture complex micro- and nanostructures. Although it is considered a robust technique, a major limitation is related to the distortion encountered in the fabricated structures during the drying process. In the present work, a manufacturing technology has been developed that emerges the benefits of soft lithography and micro-electrical discharge machining (μ-EDM) to produce stainless steel precise micro-components for micro-implantable devices. The micro-parts produced by soft lithography were subsequently surface processed via μ-EDM in order to improve the surface quality. In addition to this, it was found that μ-EDM drastically improved the surface roughness of stainless steel micro-components from Ra = 3.4 μm to Ra = 0.43 μm.

Unlike materials subtractive technologies, additive manufacturing (AM) works on producing near-net-shape components according to a specific design at which the synthesis is achieved layer by layer. Additive manufacturing allows design freedom, making design-driven manufacturing a reality. However, its poor surface quality is considered as one of the key challenges that are worth to overcome. The main objective of this chapter is to report a comprehensive overview of the techniques used to improve the surface finish and their advancements of products made by metal additive manufacturing (AM) technologies and to highlight experimental processes and data. Powder bed fusion (PBF) and direct laser deposition (DLD) are the main processes covered in this review. The chapter starts with the literature review and introduction to the main metal AM processes and their surface roughness limitations, the effect of their parameters and the effect of the laser re-melting on the surface quality. Next, it is followed by a number of surface finishing techniques such as laser polishing, chemical and electropolishing. Experimental results of post-surface finishing of AM parts by microelectrical discharge machining are also presented.

In this work, the implementation of an energetic model capable of predicting the energy consumption of a micro-electro discharge (micro-EDM) machine is presented. The developed model requires two main inputs: the estimate of the power absorbed by each subsystem composing the machine tool and the operation times, which includes the machining times. The power contributions can be determined via machine data sheets and via measurements. The energy consumption of a machine tool is due to two main contributions, ascribed to auxiliary units and to the manufacturing process itself. The developed model has been validated considering the micro-EDM milling of a circular pocket. The comparison between the estimated and measured energy consumption shows that the model is not only very accurate, but also very sensitive to the correct estimate of the machining times. Indeed, when the correction of the erosion time is operated by considering the actual value obtained by experiments instead of the one estimated by the CAD/CAM, the error referring to each energy contribution estimated by the model is greatly reduced. Furthermore, it can be noticed that most of the energy consumed by the micro-EDM manufacturing is actually inferable to the chiller unit.

A comparison of the machining performance of micro-electro-discharge machining (EDM) milling and sinking is proposed considering the fabrication of microchannels with controlled sloped walls realized in a hardened steel workpiece. Adopting the fine-finishing machining regime for both micro-EDM techniques, the experimental results show that micro-EDM sinking is about ten times faster than milling in the worst case, though a lack of accuracy in the final microfeatures in the former case is detected due to not compensated tool wear. On the contrary, micro-EDM milling provides a better control of the microchannel dimensions. Finally, a microfilter mold for medical applications is machined in order to show the potential of the combination of both technologies.

This paper reports on design, fabrication, and characterization of a microfilter to be used in biomedical applications. The microfilter, with mesh of 80 μm, is fabricated by micro-injection molding process in polymeric material (polyoxymethylene (POM)) using a steel mold manufactured by micro-electrical discharge machining process. The characteristics of the filter are investigated by numerical simulation in order to define a suitable geometry for micro-injection molding. Then, different process configurations of parameters (melt temperature, injection velocity, mold temperature, holding pressure and time, cooling time, pressure limit) are tested in order to obtain the complete part filling via micro-injection molding process preventing any defects. Finally, the component is dimensionally characterized and the process parameters optimized to obtain the maximum filtration capacity.