Search

The generation of hydrogen from water using light is currently one of the most promising alternative energy sources for humankind but faces significant barriers for large-scale applications due to the low efficiency of existing photo-catalysts. In this work we propose a new route to fabricate nano-hybrid materials able to deliver enhanced photo-catalytic hydrogen evolution, combining within the same nanostructure, a plasmonic antenna nanoparticle and semiconductor quantum dots (QDs). For each stage of our fabrication process we probed the chemical composition of the materials with nanometric spatial resolution, allowing us to demonstrate that the final product is composed of a silver nanoparticle (AgNP) plasmonic core, surrounded by satellite Pt decorated CdS QDs (CdS@Pt), separated by a spacer layer of SiO2 with well-controlled thickness. This new type of photoactive nanomaterial is capable of generating hydrogen when irradiated with visible light, displaying efficiencies 300% higher than the constituting photo-active components. This work may open new avenues for the development of cleaner and more efficient energy sources based on photo-activated hydrogen generation.

Covalent organic framework nanosheets (CONs), fabricated from twodimensional covalent organic frameworks (COFs), present a promising strategy for incorporating atomically distributed catalytic metal centers into well-defined pore structures with desirable chemical environments. Here, a series of CONs was synthesized by embedding single cobalt sites that were then evaluated for photocatalytic carbon dioxide reduction. A partially fluorinated, cobalt-loaded CON produced 10.1 μmol carbon monoxide with a selectivity of 76%, over 6 hours irradiation under visible light (TON = 28.1), and a high external quantum efficiency (EQE) of 6.6% under 420 nm irradiation in the presence of an iridium dye. The CONs appear to act as a semiconducting support, facilitating charge carrier transfer between the dye and the cobalt centers, and this results in a performance comparable with that of the state-of-the-art heterogeneous catalysts in the literature under similar conditions. The ultrathin CONs outperformed their bulk counterparts in all cases, suggesting a general strategy to enhance the photocatalytic activities of COF materials.

The global threat of antimicrobial resistance is driving an urgent need for novel antimicrobial strategies. Functional surfaces are essential to prevent spreading of infection and reduce surface contamination. In this study we have fabricated and characterized multiscale-functional nanotopographies with three levels of functionalization: (1) nanostructure topography in the form of silicon nanowires, (2) covalent chemical modification with (3-aminopropyl)triethoxysilane, and (3) incorporation of chlorhexidine digluconate. Cell viability assays were carried out on two model microorganisms E. coli and S. aureus over these nanotopographic surfaces. Using SEM we have identified two growth modes producing distinctive multicellular structures, i.e. in plane growth for E. coli and out of plane growth for S. aureus. We have also shown that these chemically modified SiNWs arrays are effective in reducing the number of planktonic and surface-attached microorganisms.

Bimetallic Pt catalysts are of interest as water redox catalysts in low temperature fuel cells. Here we compare water and hydroxyl adsorption on Pt-Ni(111) films and a PtNi(111) alloy surface with the behaviour on the pure metals. Whereas water adsorbs and desorbs intact from close packed Pt and Ni, it dissociates on PtNi surfaces to form adsorbed hydroxyl and hydrogen. Reactivity to water increases in the order Pt(111) < monolayer Pt-Ni(111) < multilayer (2-6 ML) Pt-Ni(111) ∼ PtNi(111) surface alloy and does not scale directly with the Pt strain. Hydroxyl can also be formed by reaction with pre-adsorbed O and is less stable than on pure Pt, decomposing to water and O in a broad peak near 180 K, 20 K lower than on Pt(111). The reduced stability of OH on Pt-Ni(111) films is common to all the PtNi surfaces and consistent with bimetallic PtNi surfaces showing less blocking by OH during the oxygen reduction reaction.

Water and its fragments are present on metal surfaces under all but the most extreme conditions, acting both as a reactive species and as a ligand in ways that have yet to be fully explored. This r...

As the current global threat of antimicrobial resistance (AMR) persists, developing alternatives to antibiotics that are less susceptible to resistance is becoming an urgent necessity. Recent advances in biomaterials have allowed for the development and fabrication of materials with discrete surface nanotopographies that can deter bacteria from adhering to their surface. Using binary polymer blends of polystyrene (PS), poly(methyl methacrylate) (PMMA) and polycaprolactone (PCL) and varying their relative concentrations, PS/PCL, PS/PMMA and PCL/PMMA polymer demixed thin films were developed with nanoisland, nanoribbon and nanopit topographies. In the PS/PCL system, PS segregates to the air-polymer interface, with the lower solubility PCL preferring the substrate-polymer interface. In the PS/PMMA and PCL/PMMA systems, PMMA prefers the air-polymer interface due to its greater solubility and lower surface energy. The anti-adhesion efficacy of the demixed films were tested against Pseudomonas aeruginosa (PA14). PS/PCL and PCL/PMMA demixed films showed a significant reduction in cell counts adhered on their surfaces compared to pure polymer control films, while no reduction was observed in the counts adhered on PS/PMMA demixed films. While the specific morphology did not affect the adhesion, a relationship between bacterial cell and topographical surface feature size was apparent. If the surface feature was smaller than the cell, then an anti-adhesion effect was observed, if the surface feature was larger than the cell, then the bacteria preferred to adhere.

© 2017 by the authors. The ability of nitric oxide (NO)-releasing polymer coatings to prevent biofilm formation is described. NO-releasing coatings on (poly(ethylene terephthalate) (PET) and silicone elastomer (SE)) were fabricated using aminosilane precursors. Pristine PET and SEwere oxygen plasma treated, followed by immobilisation of two aminosilane molecules: N-(3-(trimethoxysilyl)propyl)diethylenetriamine (DET3) and N-(3-trimethoxysilyl)propyl)aniline (PTMSPA). N-diazeniumdiolate nitric oxide donorswere formed at the secondary amine sites on the aminosilane molecules producing NO-releasing polymeric coatings. The NO payload and release were controlled by the aminosilane precursor, as DET3 has two secondary amine sites and PTMSPAonly one. The antibacterial efficacy of these coatingswas tested using a clinical isolate of Pseudomonas aeruginosa (PA14). All NO-releasing coatings in this study were shown to significantly reduce P. aeruginosa adhesion over 24 h with the efficacy being a function of the aminosilane modification and the underlying substrate. These NO-releasing polymers demonstrate the potential and utility of this facile coating technique for preventing biofilms for indwelling medical devices.

The performance of solar-thermal conversion systems can be improved by incorporation of nanocarbon-stabilized microencapsulated phase change materials (MPCMs). The geometry of MPCMs in the microcapsules plays an important role for improving their heating efficiency and reliability. Yet few efforts have been made to critically examine the formation mechanism of different geometries and their effect on MPCMs-shell interaction. Herein, through changing the cooling rate of original emulsions, we acquire MPCMs within the nanocarbon microcapsules with a hollow structure of MPCMs (h-MPCMs) or solid PCM core particles (s-MPCMs). X-ray photoelectron spectroscopy and atomic force microscopy reveals that the capsule shell of the h-MPCMs is enriched with nanocarbons and has a greater MPCMs-shell interaction compared to s-MPCMs. This results in the h-MPCMs being more stable and having greater heat diffusivity within and above the phase transition range than the s-MPCMs do. The geometry-dependent heating efficiency and system stability may have important and general implications for the fundamental understanding of microencapsulation and wider breadth of heating generating systems.