Search

A large amount of wool produced in the EU region is coarse and of low quality. The limited or nonutilization of such coarse wool leads to landfilling causing environmental pollution. In this paper, we studied the properties of keratin hydrolyzate, produced by a sustainable hydrolysis process, to be used as a foaming agent in foam dyeing of cotton and wool fabrics. This is a preliminary step on the way to find possible applications which overcome the environmental problem of wool waste and byproducts. We report for the first time the use of keratin hydrolyzate as a foaming auxiliary in the textile dyeing process. The surface tension, molecular weight, foam stability, blow ratio, and bubble size of keratin hydrolyzate in aqueous solutions with and without dyeing auxiliaries were determined. The dyeing influential parameter such as wet pickup was studied to identify their effect on dye fixation and color strength. The foam dyeing was compared with conventional cold-pad batch and pad-steam processes for cotton and wool, respectively. In the investigated variant, keratin hydrolyzate shows a reduction in surface tension, good foam stability along with dyeing auxiliaries, a blow ratio of about 10:1, and 0.02-0.1 mm diameter bubble sizes. These results make possible its application as a foaming agent. Cotton and wool fabrics were dyed using reactive and acid dyes respectively, on a horizontal padding mangle. In both cases, hydrolyzed keratin acts as a carrier for dye molecules and the mechanism of dyeing depends on the respective pH of the dye solution, keratin, and fiber. Foam dyeing of cotton resulted in comparable color strength, while wool shows higher color strength when compared with conventional dyeing processes. Washing and rubbing fastness of cotton and wool foam dyed fabrics are similar to the respective conventional dyed fabrics. The combinations of sustainable keratin hydrolyzate production and its use as an eco-friendly, biodegradable foaming agent in less add on foam dyeing technology resulted not only in saving of large amounts of water and energy but also will be helpful in minimizing a load on effluent and the environment.

A noticeable amount of dyes may remain in the wastewater downstream of dyeing facilities giving anaesthetic colorations as well as environmental concern. Conventional biological treatment alone cannot guarantee a sufficient decolouration and tertiary treatments have to be necessarily considered. Two oxidation schemes by ozone were considered in this work. A bubble column reactor (as a benchmark, in agreement with industrial applications) and a recycle well-mixed reactor were compared to reach the highest decolouration of standard dyes. In addition, hydrodynamic and ultrasonic cavitation were considered in the recycled well-mixed reactor to intensify its performance. The decolouration analysis was carried out for two dye classes (reactive and disperse), characterized by very different physical and chemical features. It appeared that some benefit was brought by ultrasound cavitation in the case of disperse dye only, while the degradation of the reactive dye was not intensified by the above hydraulic phenomenon. Ozone treatment was protracted to obtain different decolouration degrees of wastewater generated by wool dyeing. The resulting water was tested as a recycled process fluid to prepare fresh dyeing liquors, where devising the minimum decolouration degree became one of the quality specifications for recycling water back to dyeing. This article is protected by copyright. All rights reserved

From experiments, the influence of the physical characteristics of different binary mixtures of solids on the spouting regime of a pyramidal square-based spouted bed reactor is assessed. The applied methodology permits a more precise evaluation of the effects of the tested variables (diameter, density, sphericity) on the response variables (minimum air flows at which spouting begins and at which to maintain spouting conditions). The associated pressure drops along the bed of particles and the height of the formed fountain are analysed in each case. During the initial stages of fluidisation, binary mixtures containing different density ratios show dead zones. Segregation becomes more evident at large-size and high-density ratios. The lack of sphericity was found to be the main reason leading to blocking, channelling, and start-up problems when system failures occur. Nevertheless, the extent of segregation in all cases decreases with increasing the spouting velocity. In addition, a computational fluid dynamic model based on the discrete element method, previously validated for a single solid bed, is proposed as a tool to predict and evaluate potential segregation phenomena in binary mixtures. This model reproduced with high accuracy the encountered segregation phenomena. Its use may help define the technical limits inherent in the pyramidal spouted bed reactor.

Keratin from wool fibers was extracted with different extraction methods, for example oxidation, reduction, sulfitolysis, and superheated water hydrolysis. Different samples of extracted keratin were characterized by molecular weight determination, FT-IR and NIR spectroscopy, amino acid analysis, and thermal behavior. While using oxidation, reduction, and sulfitolysis, only the cleavage of disulfide bonds takes place; keratin hydrolysis leads to the breaking of peptide bonds with the formation of low molecular weight proteins and peptides. In the FT-IR spectra of keratoses, the formation of cysteic acid appears, as well as the formation of Bunte salts (–S–SO3–) after the cleavage of disulfide bonds by sulfitolysis. The amino acid composition confirms the transformation of amino acid cystine, which is totally converted into cysteic acid following oxidative extraction and almost completely destroyed during superheated water hydrolysis. Thermal behavior shows that keratoses, which are characterized by stronger ionic interaction and higher molecular weight, are the most temperature stable keratin, while hydrolyzed wool shows a poor thermal stability.

It is well established that current flame retardant (FR) products at disposal generate various ecological hazards. Irrespective of their environmental impacts, the FR market is growing and is estimated to reach 2.8 million tons globally in 2018. In the textile domain, FRs are incorporated into baby clothing, pushchairs, car seats, etc. When disposed, these FR textile products end up in a landfill or are incinerated. These disposal processes are unsustainable. With landfilling, there is a huge chance of the FR product leaching into the environment. Similarly, FRs decrease energetic yields in the incineration process due to incomplete combustion. To cope with such issues, degradation and elimination of the FR product from the textile products before disposal could be a sustainable alternative. This study dealt with the preliminary degradation of flame retardant from the cotton textiles and its thermal characterization. Energy valorization by gasification is considered beneficial opposed to incineration with overall low energy recovery. The initial optimum gasification conditions including FR-treated cotton as a feeding material and potential outcomes of FR-treated cotton after degradation were characterized.

The purpose of this work is to understand the impact of superheated water hydrolysis treatment on the chemical properties of wool, and compare it with a conventional method of alkaline hydrolysis. The effects of hydrolysis temperature and concentration of alkali on the properties of wool were investigated. Superheated water hydrolysis was carried out at the temperatures of 140℃ and 170℃, with a material to liquor ratio of 1:3 for 1 hour. In conventional alkaline hydrolysis, the experiments were carried out in the same conditions using potassium hydroxide (KOH) and calcium oxide (CaO) with a concentration in the range of 5%–15% on the fiber weight (o.w.f.). The effects of hydrolysis temperature and alkali concentrations on wool properties were checked using optical and scanning electron microscopy. It was observed that the hydrolyzates obtained in both cases contained low molecular weight proteins and amino acids. Both the hydrolysis processes resulted in degradation of the wool fibers. However, superheated steam hydrolysis is an environmentally friendly and less expensive process, as it is performed using water as a solvent. The wool hydrolyzates produced using superheated water hydrolysis could find a potential application in agriculture, such as fertilization, soil improvement and suchlike.

The present work aims to study the effect of the liquid temperature on the performance of ultrasounds (US) in a dyeing process. The approach was both theoretical and experimental. In the theoretical part the simplified model of a single bubble implosion is used to demonstrate that the "maximum implosion pressure" calculated with the well known Rayleigh-Plesset equation for a single bubble can be correlated with the cavitation intensity experimentally measured with an Ultrasonic Energy Meter (by PPB Megasonics). In particular the model was used to study the influence of the fluid temperature on the cavitation intensity. The "relative" theoretical data calculated from the implosion pressure were satisfactorily correlated with the experimental ones and evidence a zone, between 50 and 60°C, were the cavitation intensity is almost constant and still sufficiently high. Hence an experimental part of wool dyeing was carried out both to validate the previous results and to verify the dyeing quality at low temperatures (40-70°C) in presence of US. A prototype dyeing equipment able to treat textile samples with US system of 600W power, was used. The dyeing performances in the presence and absence of US were verified by measuring ΔE (colour variation), Re,% (reflectance percentage), K/S (colour strength) and colour fastness. The US tests performed in the temperature range of 40-70°C were compared with the conventional wool dyeing at 98°C. The obtained results show that a temperature close to 60°C should be chosen as the recommended US dyeing condition, being a compromise between the cavitation intensity and the kinetics which rules the dyestuff diffusion within the fibres.

Flame retardants (FRs) have been around us for decades to increase the chances of survival against fire or flame by limiting its propagation. The FR textiles, irrespective of their atmospheric presence are used in baby clothing, pushchairs, car seats, etc. The overall FR market in Asia, Europe, and the United States in 2007 was around 1.8 million metric tonnes. It is estimated that the worldwide consumption of FRs will reach 2.8 million tonnes in 2018. Unfortunately, a sustainable approach for textile waste, especially in the case of FR textiles, is absent. Incineration and landfill of FR textiles are hindered by various toxic outcomes. To address the need for sustainable methods of discarding FR textiles, the mechanical recycling of cotton curtains was evaluated.

A large amount of coarse wool, practically unserviceable for textile use, is generated in Europe from sheep shearing and butchery. Such a byproduct is either dumped, burned, or sent to landfill. Following the European Commission regulations on animal byproduct control, unserviceable raw wool is classified as a category 3 special waste materials. The collection, storage, transport, treatment, use, and disposal of such unserviceable raw wool are subject to European Union regulations because of a potential risk to human and animal health. This study aims at converting the waste wool into nitrogen fertilizers at a commercial scale for grassland management and cultivation purposes. The chemical transformation of waste wool in to fertilizer is based on a green economically sustainable hydrolysis treatment using superheated water. The experiments were carried out in a semi-industrial reactor feeding superheated water. The wool/superheated water system was maintained for different reaction times. The optimal conditions for this treatment were as follows: 170 °C for 60 min with a solid to liquor ratio (MLR) close to 1. The hydrolyzed product was analyzed using amino acid analysis and molecular weight distribution. Both the amino acid and molecular weight distribution analysis revealed that the wool was completely degraded and the hydrolyzed product contains a low molecular weight proteins and amino acids. Several hydrolyzed product obtained at different conditions were tested for germination which showed a germination index higher than 100% without collateral phytotoxicity. The presence of amino acids, primary nutrients, and micronutrients in wool hydrolyzates, along with a concentration of heavy metals below the standard limit, confirm the possibility of using wool hydrolyzates as a nitrogen based ecologically sound fertilizer.

The [Formula: see text]-methylol dimethyl phosphono propionamide (MDPA) flame retardant compounds are predominantly used for cotton fabric treatments with trimethylol melamine (TMM) to obtain better crosslinking and enhanced flame retardant properties. Nevertheless, such treatments are associated with a toxic issue of cancer-causing formaldehyde release. An eco-friendly finishing was used to get formaldehyde-free fixation of flame retardant to the cotton fabric. Citric acid as a crosslinking agent along with the sodium hypophosphite as a catalyst in the treatment was utilized. The process parameters of the treatment were enhanced for optimized flame retardant properties, in addition, low mechanical loss to the fabric by response surface methodology using Box–Behnken statistical design experiment methodology was achieved. The effects of concentrations on the fabric’s properties (flame retardancy and mechanical properties) were evaluated. The regression equations for the prediction of concentrations and mechanical properties of the fabric were also obtained for the eco-friendly treatment. The R-squared values of all the responses were above 0.95 for the reagents used, indicating the degree of relationship between the predicted values by the Box–Behnken design and the actual experimental results. It was also found that the concentration parameters (crosslinking reagents and catalysts) in the treatment formulation have a prime role in the overall performance of flame retardant cotton fabrics.