Search

In the present work positron annihilation spectroscopy was employed for investigation of defects created in titanium by hydrogen loading. Pure titanium samples were firstly annealed to remove dislocations introduced by cutting and polishing. Subsequently the samples were loaded with hydrogen up to various hydrogen concentrations. Ti samples with different microstructures were compared: (i) conventional coarse grained sample, (ii) ultra fine grained material with microstructure refined by severe plastic deformation. Hydrogen gas loading of coarse grained and ultra fine grained samples was performed at hydrogen gas pressure of 103 bar and temperature of 150 °C. This resulted in formation of δ-TiH x phase in Ti matrix. The hydrogen content absorbed in the samples was determined by thermogravimetric analysis. The phase composition of hydrogen-loaded samples was characterized by X-ray diffraction. Hydrogen loading introduced vacancies which agglomerated in the sample into small vacancy clusters. In addition to vacancies, dislocations were created by α-Ti → δ-TiH x phase transition. Differential thermal analysis revealed that hydrogen is trapped at several kinds of traps characterized by different binding energies. The release of hydrogen from these traps precedes the decomposition of the δ-TiH x phase.

The aim of this work was investigation of hydrogen interaction with defects in Ti. Well-annealed Ti samples were loaded with hydrogen either electrochemically or using H2 gas phase. The hydrogen content and the phase composition of hydrogen loaded samples was determined by thermogravimetric analysis and by X-ray diffraction (XRD) respectively. Positron lifetime (LT) spectroscopy was employed for investigation of defects created by hydrogen loading. High-temperature H2 gas loading led to complete transformation of the whole sample into δ-TiH2 while low-temperature H2 gas loading and the electrochemical loading resulted in a non-uniform structure with most of the hydrogen absorbed in a sub-surface layer. All hydrogen-loaded samples exhibit positron lifetime component of ≈ 170 ps corresponding to positrons trapped at dislocations. Vacancy clusters were observed in the electrochemically loaded sample and the H2 gas phase loaded sample at low temperature.

The positron annihilation spectroscopy was employed for characterisation of defects in pure Ti with ultra fine grained (UFG) structure. UFG Ti samples were prepared by two techniques based on severe plastic deformation (SPD): (i) high pressure torsion (HPT) and (ii) equal channel angular pressing (ECAP). Although HPT is the most efficient technique for grain refinement, the size of HPT-deformed specimens is limited. On the other hand, ECAP is less efficient in grain refinement but enables to produce larger samples more suitable for industrial applications. Characterisation of defects by positron annihilation spectroscopy was accompanied by hardness testing in order to monitor the development of mechanical properties of UFG Ti.