Search

The deposition of coatings by means of Physical Vapor Deposition (PVD) is an established process to enhance the lifetime and performance of carbide bulk tools. Although the effect of surface pretreatments on conventional WC-Co surfaces is well known, this investigation examines for the first time, how different surface pretreatments affect the surface integrity of thermally sprayed WC-Co substrates prior a subsequent PVD layer deposition and its resulting properties. Therefore, a WC-12Co feedstock with an average WC particle size of 100 nm was thermally sprayed on AISI M3 steel substrates using High Velocity Oxy-Fuel (HVOF) technique. Hereinafter, the HVOF sprayed WC-Co coatings were grounded and polished, thus serving as substrates for further surface pretreatments and the deposition of a CrAlN PVD hard coating by means of magnetron sputtering. To evaluate the influence of various surface pretreatments on the HVOF sprayed WC-Co coatings, several sequences such as heating, inert gas ion etching, metal ion etching, and High Power Impulse Magnetron Sputtering (HIPIMS)-etching were carried out. With respect to the subsequent PVD layer deposition, the results show that the pretreatment does neither affect the hardness nor Young's modulus of the CrAlN top layer. Yet, different effects on the WC-Co surface and PVD coating adhesion are observed. Inert gas ion etching leads to a faster removal of the carbides than of the Co-binder matrix. In contrast, metal ion etching provides a “micro-blasting” effect and removes the binder matrix as verified by Atomic Force Microscope (AFM) measurements. As a result, a decrease of the compressive residual stress state and an increase of the surface free energy are observed. With respect to HIPIMS-etching, a Cr-nanolayer was applied onto the WC-Co surface, which enhances the adhesion of the CrAlN top layer. Nevertheless, HRC Rockwell adhesion and scratch tests reveal a superior adhesion for samples pretreated with the metal ion etching.

We determined the intermolecular interaction potential, V(r), of dense lysozyme solutions, which governs the spatial distribution of the protein molecules and the location of its liquid–liquid phase separation (LLPS) region, in various crowding environments applying small-angle X-ray scattering in combination with liquid-state theory. We explored the effect of polyethylene glycol (PEG) on V(r) and the protein’s phase behavior over a wide range of temperatures and pressures, crossing from the dilute to the semidilute polymer regime, thereby mimicking all crowding scenarios encountered in the heterogeneous biological cell. V(r) and hence the protein–protein distances and the phase boundary of the LLPS region strongly depend on the polymer-to-protein size ratio and the polymer concentration. The strongest effect is observed for small-sized PEG molecules, leading to a marked decrease of the mean intermolecular spacing of the protein molecules with increasing crowder concentration. The effect levels off at int...

We present an X-ray Compton scattering study on aqueous trimethylamine N-oxide (TMAO) and guanidine hydrochloride solutions (GdnHCl) as a function of temperature. Independent from the concentration of the solvent, Compton profiles almost resemble results for liquid water as a function of temperature. However, the number of hydrogen bonds per water molecule extracted from the Compton profiles suggests a decrease of hydrogen bonds with rising temperature for all studied samples, and the differences between water and the solutions are weak. Nevertheless, the data indicate a reduced bond weakening with rising TMAO concentration up to 5 M of 7.2% compared to 8% for pure water. In contrast, the addition of GdnHCl appears to behave differently for concentrations up to 3.1 M with a weaker impact on the temperature response of the hydrogen bond structure.