Search

Organogels are excellent drug carrier for controlled release. Organogels based on amino acid derivatives has been widely used in the area of drug delivery. In this study, a series of the organogel system based on amino acid derivatives gelators was designed and prepared to investigate the structure-property correlation in organogels. To investigate the factors that influence the property of drug release, we varied the formulation in the organogels: gelator structure, gelator concentration, volume of antigelation solvent, and drug loading. Through the Box–Behnken tests, the optimum organogel formulation in vitro was obtained. The self-healing properties of the organogel have been utilised for injection of a model lipophilic risperidone in situ, and sustained release of the drug has been studied over about one week in vivo. In conclusion, the gelation ability of gelators could be adjusted by the gelator structure. Gel property is related with the whole composition of the formulation. As drug carrier, the drug release property of organogels is affected by multiple factors. Our investigation of the gel release property will play a theoretical guiding role in the application in the in situ drug delivery system.

Genipin is a naturally occurring nontoxic cross-linker, which has been widely used for drug delivery due to its excellent biocompatibility, admirable biodegradability and stable cross-linked attributes. These advantages led to its extensive application in the fabrication of hydrogels for drug delivery. This review describes the physicochemical characteristics and pharmacological activities of genipin and attempts to elucidate the detailed mechanisms of the cross-linking reaction between genipin and biomaterials. The current article entails a general review of the different biomaterials cross-linked by genipin: chitosan and its derivatives, collagen, gelatin, etc. The genipin-cross-linked hydrogels for various pharmaceutical applications, including ocular drug delivery, buccal drug delivery, oral drug delivery, anti-inflammatory drug delivery, and antibiotic and antifungal drug delivery, are reported. Finally, the future research directions and challenges of genipin-cross-linked hydrogels for pharmaceutical applications are also discussed in this review.

Beibei Hu,1,2 Jianxin Wang,3 Jing Li,3 Sanming Li,3 Heran Li1 1School of Pharmacy, China Medical University, Shenyang 110122, People’s Republic of China; 2College of Chemistry and Pharmaceutical Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, People’s Republic of China; 3School of Pharmacy, Shenyang Pharmaceutical University, Shenyang 110016, People’s Republic of ChinaCorrespondence: Heran LiSchool of Pharmacy, China Medical University, 77 Puhe Road, Shenyang North New Area, Shenyang 110122, People’s Republic of ChinaTel +86 13897945866Email liheranmm@163.comPurpose: The purpose of this research was to study the basic physicochemical and biological properties regarding the application of L-tartaric acid modified chiral mesoporous silica nanoparticle (CMSN) as a drug carrier, and to explore the structure–property relationship of silica-based materials.Methods: CMSN with functions of carboxyl modification and chirality was successfully synthesized through co-condensation method, and the basic characteristics of CMSN, including morphology, structure, wettability, degradation, bio-adhesion and retention ability in gastrointestinal tract (GI tract) were estimated by comparing with non-functionalized mesoporous silica nanoparticles (MSN). Meanwhile, the biocompatibility and toxicity of L-tartaric modification were systematically evaluated both in vitro and in vivo through MTT cell viability assay, cell cycle and apoptosis assay, hemolysis assay, histopathology examination, hematology analysis, and clinical chemistry examination.Results: CMSN and MSN were spherical nanoparticles with uniform mesoporous structure. CMSN with smaller pore size and carboxyl functional groups exhibited better wettability. Besides, CMSN and MSN could dissolve thoroughly in simulated physiological fluids during a degradation period of 1– 12 weeks. Interestingly, the in vitro and in vivo behaviors of carriers, including degradation, bio-adhesion and retention ability in the GI tract were closely related to wettability. As expected, CMSN had faster degradation rate, higher mucosa-adhesion ability, and longer retention time. Particularly, CMSN improved the bio-adhesion property in both gastric mucosa and small intestinal mucosa, and prolonged the GI tract retention time to at least 12 h, which meant higher probability for absorption. The biocompatibility and toxicity examination indicated that CMSN was a kind of biocompatible bio-material with good blood compatibility and negligible toxicity, which is required for further applications in biological fields.Conclusion: CMSN with functions of carboxyl modification and chirality had superiority in terms of both physicochemical and biological properties. The in vitro and in vivo behaviors of carriers, including degradation, bio-adhesion, and retention were closely related to wettability.Keywords: chiral mesoporous silica, carboxyl modification, wettability, bio-adhesion, biocompatibility

Herein, three kinds of mesoporous silica nanoparticles (BMSs) were biomimetically synthesized by using heterocyclic amino acid derivatives as template and their the basic capacity in being drug carriers that covered structure, wettability, degradation, brain uptake, hemocompatibility and toxicity were systematically evaluated. The results indicated that BMSs were kinds of spherical nanoparticles with good biocompatibility. Their in vitro and in vivo behaviors, including degradation, biodistribution and biocompatibility were mainly governed by the wettability which was closely related to the structure and pore diameter of mesoporous silica nanoparticles. BMSs can degrade completely under simulated physiological environments through a time period of 2–13 weeks. They showed the tendency of brain distribution, and the distribution amount peaked at 4 h post administration. Particularly, Trp-BMS (BMS templated by C16- l -tryptophan) with the largest amount of OH groups on the surface exhibited highest wettability, fastest degradation rate and the lowest brain distribution ability. Besides, His-BMS (BMS templated by C16- l -histidine) and Pro-BMS (BMS templated by C16- l -poline) were silica materials with good biocompatibility. Both in vitro and in vivo studies uncovered no significantly toxicity for BMSs and they were proved to be safe when they circulated into the blood. However, Trp-BMS might induce severe hemolysis and cell cycle arrest due to the high wettability. It is believed that appropriate wettability is required for the in vivo application of nanomaterials and the in vivo evaluation of mesoporous silica nanoparticles will provide useful information for understanding the underlining toxicity of biomaterials and bring new insights on designing efficient drug delivery systems.

We developed a hybrid nanostructured lipid carrier/dual pH- and thermo-sensitive hydrogel (NLC-Gel) for ocular delivery of quercetin (QN). The hydrogel consisted of carboxymethyl chitosan and poloxamer 407 (P407) was cross-linked using a naturally occurring cross-linker genipin (GP), while the hydrogel cross-linked using glutaraldehyde was used as a control. NLC loaded with quercetin/hydrogel cross-linked by a genipin hybrid drug delivery system (QN-NLC-Gel-GP) exhibited better cytocompatibility and lower ocular irritation than its glutaraldehyde counterpart. The levels of cellular uptake in NLC and NLC-Gel groups were improved. The results of fluorescence imaging and ex vivo transcorneal study indicated that NLC could facilitate transcorneal penetration of lipophilic molecules and incorporation into the hydrogel could increase the precorneal residence time of NLC. The area under the curve of quercetin in the NLC-Gel group was 4.4-fold that in the Eye drops group because of a longer precorneal retention time. In summary, the developed drug delivery system has enormous potential for ophthalmic applications.

Mesoporous silica nanoparticles (MSNs) with remarkable structural features have been proven to be an excellent platform for the delivery of therapeutic molecules. Biological barriers in various forms (e.g., mucosal barrier, cellular barrier, gastrointestinal barrier, blood-brain barrier, and blood-tumor barrier) present substantial obstacles for MSNs. The physicochemical parameters of MSNs are known to be effective and tunable not only for load and release of therapeutic molecules but also for their biological responsiveness that is beneficial for cells and tissues. This review innovatively provides a description of how and why physicochemical properties (e.g., particle size, morphology, surface charge, hydrophilic-hydrophobic property, and surface modification) of MSNs influence their ability to cross the biological barriers prior to reaching targeted sites. First, the structural and physiological features of biological barriers are outlined. Next, the recent progresses in the critical physicochemical parameters of MSNs are highlighted from physicochemical and biological aspects. Surface modification, as an important strategy for achieving rapid transport, is also reviewed with special attention to the latest findings of bioactive groups and molecular mechanisms. Furthermore, advanced designs of multifunction intelligent MSNs to surmount the blood-tumor barrier and to actively target tumor sites are demonstrated in detail. Lastly, the biodegradability and toxicity of MSNs are evaluated. With perspectives for their potential application and biosafety, the clues in summary might lead to drug delivery with high efficiency and provide useful knowledge for rational design of nanomaterials.

The present paper reported a biomimetic synthesis of mesoporous silicas (BMSs) at room temperature by using synthesized polymers (C16- l -His, C16- l -Pro and C16- l -Trp) which derived from amino acid with ring structures as template under basic condition via co-structural-directing-agent method. The formation mechanism of BMSs and effect of initial synthesis conditions (such as surfactant structure, pH and co-solvents) on morphology and structure of BMSs were systematically studied. Synthesized BMSs were characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and nitrogen adsorption/desorption isotherms. The results showed that the surfactant structure was the dominant factor to direct the final mesostructure of BMSs, since the structure of surfactant affected the structure and size of clusters. Meanwhile the generation of BMSs required very rigorous alkaline condition which controlled the ionization degree of the surfactant and thus contributing to adequate stacking energy. Higher pH resulted in construction of channels with higher curvature. The presence of ethanol was found to facilitate the formation of BMSs with larger particle size. In application, aspirin can be loaded into BMSs with high efficiency, and the drug crystalline state of aspirin transformed from crystalline state to amorphous state during this process, which undoubtedly lead to the improvement of drug dissolution from 72.8% to 100% within 90 min. It is convincible that the biomimetic method presented here provided novel insight on precisely control of mesoporous silica and undoubtedly promoted the application of mesoporous silica materials.

The aim of this study was to develop a novel nanostructured lipid carrier (NLC) based dual-responsive hydrogel for ocular drug delivery of quercetin (QN). NLC loaded with quercetin (QN-NLC) was prepared using melt-emulsification combined with ultra-sonication technique. A three-factor five-level central composite design (CCD) was employed to optimize the formulation of QN-NLC. The optimized QN-NLC presented a particle size of 75.54nm with narrow size distribution and high encapsulation efficiency (97.14%).QN-NLC was characterized by TEM and DSC. In addition, a pH and temperature dual-responsive hydrogel composed of carboxymethyl chitosan (CMCS) and poloxamer 407(F127) was constructed by a cross-linking reaction with a naturally occurring nontoxic crosslinking agent genipin (GP). FT-IR was employed to demonstrate that F127/CMCS hydrogel was successfully synthesized. The results of SEM analysis and swelling experiments indicated that F127/CMCS hydrogel was both temperature-responsive and pH-responsive. From the results of In vitro release studies, dual temperature and pH responsiveness of the hydrogel was demonstrated, and 80.52% of total quercetin was released from the QN-NLC based hydrogel (QN-NLC-Gel) within 3days, revealing QN-NLC-Gel released drug sustainably. Taken together, the developed NLC-based hydrogel is a promising drug delivery system for the ophthalmic application.

In this study, spherical shaped chiral mesoporous silica nanoparticles (CMS) was biomimetic synthesized using histidine derivatives (C16-L-histidine) as template via the sol–gel reaction and employed as poorly water-soluble drug nimodipine (NMP) carrier. Characteristics of CMS and its application as drug carrier were intensively investigated and compared with MCM41. Then NMP was respectively loaded into CMS and MCM41 with the drug: carrier weight ratio of 2:1. Structural features of NMP before and after drug loading were systemically characterized. The results demonstrated that hydrogen bonds were formed between NMP and carriers during the drug loading process. After drug loading, crystalline state of NMP effectively converted into modification L and amorphous state, and the first form turned out to be easily removed by washing. On the other hand, drug dissolution rate was significantly improved after drug loading, and the best result came from NMP-C3 sample. It was able to release 17.83% of drug within 60 min, which was 6.8-fold higher than the release amount of pure NMP. Undoubtedly, NMP-C3 presented the highest relative bioavailability (386.22%), and the best therapeutic effect. Meanwhile, CMS improved the brain distribution of NMP in vivo.

Degradation properties play a vital role in long-term in situ drug delivery systems. In vitro degradation behaviours of organogels were investigated via two approaches in this study: a weight loss method and a drug release method. Through the two methods, parameters that affect the degradation of organogels (such as gelator type, gelator concentration and oil type) were systematically tested under a lipase solution to better mimic in vivo circumstances. The gelator structure had the greatest influence on degradation behaviour. By regulating the parameters that influence degradation, the drug release method can properly predict in vivo degradation. Our investigation of organogel degradation provides a theoretical basis for in vivo organogel use as a biodegradable in situ implant for drug delivery.

Graphical Abstract Unlabelled image SDS assisted HPMC improved the physical stability of flurbiprofen suspension. Therefore the physical stability of FBP suspensions and the interaction of HPMC/SDS were studied, and a certain relationship among them has been found. The uniformity and the re-dispersion time of the suspensions were associated with the HPMC/SDS interaction., The anionic surfactant sodium dodecylsulfate (SDS) has improved the physical stability of flurbiprofen (FBP) suspension, which was suspended by 0.2% (w/v) hydroxypropylmethyl cellulose (HPMC, K4M). Therefore, the physical stability of FBP suspensions and the interaction of HPMC/SDS were studied, and a certain association between them was revealed. The anti-solvent precipitation method was used to prepare suspensions. The apparent drug concentration from different sites was evaluated to get the dispersion of drug actually. The process of flocculation and deflocculation with the addition of SDS was caught by analyzing the morphology of the suspended particles. The physical stability of the FBP suspensions was characterized mainly by measuring the re-dispersion time, the zeta potential and particle size. Meanwhile, conductivity measurements were carried out to obtain the characteristic concentrations of SDS in HPMC/SDS system. The viscosities, the abilities for improving the solubility and wettability of FBP in the separate and mixed HPMC/SDS solutions were also contrasted respectively. The suspensions prepared with HPMC/SDS possessed better physical stability. The suspensions were uniform when the concentration of SDS was between the critical adsorption concentration (CAC) and the polymer saturation point (PSP). After PSP, the uniformity became worse and worse until the SDS was enough to form a deflocculation state. Besides, the re-dispersion time of FBP suspensions was longest when the concentration of SDS around CAC and shorter by shorter after the critical micelle concentration (CMC). The article provided a new sight on the relation between the interaction of excipient matrix and pharmaceutical preparations.

Chiral mesoporous silica nanoparticles (CMSNs) are important members of mesoporous silica nanoparticles (MSNs) family. They not only exhibit prominent physicochemical properties as MSNs, being effective and tunable for drug loading and releasing, but also have specific functions and unique biological behavior advantages due to the presence of helical architectures at both the molecular and macroscopic scale. Accordingly, CMSNs show extensive and promising applications in several fields (e.g., chiral catalysis, chiral selectivity, chiral recognition, separation and drug delivery). Moreover, they have turned out to be a hotspot in medical research. For the past two decades, considerable studies on CMSNs have been conducted, and synthesis, chirality origination mechanisms, structural properties, as well as practical applications have been substantially progressed. In the present study, the experimental and theoretical studies on synthesizing strategies and chirality origination mechanisms of CMSNs are summarized and assessed, especially the synthesizing methods and mechanisms of surfactants as templates. Furthermore, the typical applications of CMSNs, especially in drug delivery system are elaborated. In view of the in vivo utilization of CMSNs, we also evaluate the biosafety of CMSNs. Thus, this study also discusses the research status, development prospects and future challenges of CMSNs. Undoubtedly, CMSNs with unique functionalities are capable of facilitating the application of nanoporous silica and presenting novel insights into the development of pharmaceutical science and other relevant fields.

Graphical Abstract Unlabelled image The measurements of interfacial tension at the oil–water interface about polymers for pharmaceuticals by the Wilhelmy plate method., Macromolecules of polysaccharides, proteins and poloxamers have a hydrophobic portion and a hydrophilic one that can be used as emulsifiers. Parts of these emulsifiers are safe pharmaceutical excipients, which can replace the irritant low molecular weight surfactants to formulate emulsions for the pharmaceutical field. This project focused on preparing O/W emulsions stabilized with polymers for pharmaceuticals such as polysaccharides, proteins and poloxamers, including hydroxypropyl methylcellulose (HPMC), methylcellulose (MC), gelatin, poloxamer 407 (F127) and poloxamer 188 (F68). Emulsion physical stability was assessed by centrifugation, autoclaving sterilization and droplet size measurements. The stabilization mechanisms of emulsions were determined by interfacial tension and rheological measurements. Results stated that the efficacy of these polymers for pharmaceuticals stabilized emulsions was sorted in the order: F127 > F68 > HPMC > MC > Gelatin.

Herein, interfacial interactions of amorphous solid dispersion formed by nitrendipine (TDP) and two types of water-soluble polymers (polyvinyl pyrrolidone K30 (PVP) and polyethylene glycol 6000 (PEG)) were tracked mainly concerning with interaction forces and wetting process. Infrared spectroscopy (IR), raman spectroscopy and contact angle instrument were mainly used through the study. Hydrogen bonding forces were formed between drug and excipient in TDP-PVP and TDP-PEG. The red raman shift of TDP-PVP and TDP-PEG confirmed the hydrogen bonding forces between TDP and the two polymers. Both TDP-PVP and TDP-PEG showed higher drug release and TDP-PVP accomplished TDP release faster due to its better drug amorphous state. It is believed that the track of interfacial interactions will certainly become powerful tools to provide valuable instruction for designing and evaluating amorphous solid dispersions.

The present study established indometacin (IMC) delivery system with chiral mesoporous silica nanoparticles (CMSNs) and amino-modified chiral mesoporous silica nanoparticles (Amino-CMSNs) that previously reported as pharmaceutical excipients, and their systemic biological effects, mainly consisting of in vitro drug intestinal permeability, haemolysis assay, in vivo pharmacokinetics, anti-inflammation pharmacodynamics and gastric irritation, were addressed. It turned out that the two IMC delivery systems established by CMSN and Amino-CMSN significantly improved drug intestinal permeability due to the improved drug dissolution caused by conversion of drug crystalline state to amorphous phase. Further, IMC-loaded Amino-CMSN was the superior choice because of its higher dissolution rate. Furthermore, CMSN and Amino-CMSN were safe to be circulated in blood, and Amino-CMSN with significant lower haemolysis ratio than CMSN was better for the minimum haemolytic behaviour. Oral bioavailability and anti-inflammation effect of IMC delivery systems established by CMSN and Amino-CMSN were enhanced compared with IMC, which was attributed to the primary cause of the improvement of IMC dissolution, and Amino-CMSN exhibited better biological effect. As a result of these facts, it is believed that the effective delivery of IMC by Amino-CMSN will provide a new candidate to formulate poorly soluble drugs so as to significantly develop pharmaceutical application.

A novel bolaamphiphile surfactant N,N'-(dodecane-1, 12-diyl) bis (2,6-diaminohexanamide) (DADL) was designed and synthesized using l-lysine and 1,12-diaminododecane as the hydrophilic and hydrophobic part, respectively. After separation and purification, the structure of the synthetic bolaamphiphile surfactant was verified by FTIR, MS and 1H NMR. The synthetic bolaamphiphile was able to self-assemble to form vesicles. After formulation screening, vesicles loaded with 5-Fluorouracil (5-Fu) were prepared with Tween 60 and DADL by sonication and were examined by dynamic light scattering and transmission electron microscopy. Micro-FTIR was applied to investigate the conformation of the bola molecules within the vesicle membrane. The release profile of the vesicles showed a pH-sensitive and sustained release. No significant toxicity was observed in an in vitro cell viability assay. The antitumor efficacy of the 5-Fu-loaded vesicles on H22 tumor-bearing mice was remarkably high due to the EPR effects. These results show that our novel bolaamphiphile derived from lysine has excellent potential as a pH-sensitive drug carrier.

In the present work, molecular imprinting silica xerogel (MISX) with selective recognition function aiming to regulate drug therapy was synthesized using biomimetic method with poly(ethyleneimine)s (PEIs) as the polymer template and levorotatory ofloxacin (LOFL) as recognition template. Ultraviolet spectroscopy wavelength scanning was used to test the removal process of LOFL, and characteristics of selective loading ofloxacin (OFL) into MISX were investigated using Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). Molecular recognition functionality of MISX was intensively studied, including OFL loading and release. The results suggested that MISX possessed ability to recognize and selectively adsorb LOFL into MISX in OFL aqueous solution. Amorphous phase of adsorbed molecules contributed to molecular recognition because amorphous state increased the stability of LOFL that were selectively adsorbed into MISX, which induced stronger hydrogen bonding formed between LOFL and MISX so as to improve LOFL recognition ability. In vitro release revealed that OFL-MISX tablet initially released LOFL and later gradually OFL into dissolution medium. Thus conversion of drug release with different pharmacological activity had special value in delivering systems.

The objective of this study is to explore the surface wettability modulated by a surfactant and its effects on the drug release and absorption of fenofibrate solid dispersions (FF SDs). Both the polyvinylpyrrolidone/sodium lauryl sulfate (PVP/SLS) coprecipitate and FF SDs were prepared by solvent evaporation method. The contact angle of PVP/SLS coprecipitate with various PVP/SLS weight ratios was determined to screen out the suitable content of SLS incorporated in FF SDs. Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) was used to analyze the surface composition of the PVP/SLS coprecipitate, suggesting that SLS molecules were prone to concentrate on the carrier surface. The physicochemical characteristics of FF, PVP, SLS, FF SDs, and FF physical mixtures (PMs) were evaluated by thermal analysis, XRD, FTIR, and SEM, which revealed that FF was molecularly dispersed in SDs. The interaction between SLS and PVP or FF confirmed by FTIR would affect the surface morphology of SDs. Finally, the contact angle of FF SDs was measured to explore the effects of surface wettability on the dissolution behavior and drug absorption of FF SDs. The interesting thing is that the wettability of the PVP/SLS coprecipitate was positively related to that of FF SDs. The improved wettability of FF SDs or the PVP/SLS coprecipitate by adding SLS contributed to the slight enhancement of initial drug release and absorption, which implied that wettability would be a promising tool in the formulation studies.

This study examined the effects of pH and chirality on the release of flurbiprofen (FP)-loaded chiral (L/D) self-assembled mesoporous silica nanoparticles (CSA-L/D-MSNs), which were synthesized using cationic cetyltrimethyl ammonium bromide (CTAB) as a template and chiral modified using L/D-tartaric acids. The morphology and physicochemical properties of the CSA-L/D-MSNs were systemically determined and compared with those of non-functionalized mesoporous silica nanoparticles (MSN). The results showed that the CSA-L/D-MSNs were spherical nanoparticles, and the chirality in the L/D-tartaric acids was successfully imparted to the CSA-L/D-MSNs. FP could be loaded into the CSA-L/D-MSNs and was effectively transformed from the crystalline state to an amorphous state after drug loading due to the finite size effect. The release of FP@CSA-L/D-MSNs was faster than that of FP in a pH 1.2 medium and slower in a pH 6.8 medium, and it was better than that of FP@MSNs in both release mediums. Meanwhile, the FP@CSA-L/D-MSNs exhibited a clearly enhanced pH response because the negatively charged carboxyl groups on their surface induced stronger electrostatic repulsion between FP and CSA-L/D-MSNs. Moreover, the effect of the chiral environment on the release of FP@CSA-L/D-MSNs was further studied by introducing small-molecule chiral additives (L/D-alanine). It was found that the release of FP was inhibited in a chiral environment. Particularly, the CSA-L/D-MSNs began to exert the chiral recognition function, in which the CSA-L-MSN responded to chiral stimuli and enhanced the cumulative release amount from 84.25 %-89.11 % in a pH 6.8-L medium, while the CSA-D-MSN showed a suppressed release in the pH 6.8-L medium. Notably, the CSA-L/D-MSNs exhibited intelligent drug release by both chirality response and pH response, and will provide valuable guidance for the design of drug delivery systems.

Context: Orgnaogels based on amino acid derivatives have been widely used in the area of drug delivery. Objective: An organogel system based on l-lysine derivatives was designed and prepared to induce a thermal sensitive implant with higher transition temperature, better mechanical strength, and shorter gelation time. Materials and methods: The organogel was prepared by injectable soybean oil and methyl (S)-2,5-ditetradecanamidopentanoate (MDP), which was synthesized for the first time. Candesartan cilexetil (CC) was chosen as model drug. Different formulations were designed and optimized by response surface method. Thermal, rheology properties, and gelation kinetics of the optimized formulation had been characterized. The release behaviors in vitro, as well as in vivo were evaluated in comparison with the oily solution of drugs. Finally, the local inflammation response of in situ organogel was assessed by histological analysis. Results and discussion: Results showed that the synthesized gelator, MDP, had a good gelation ability and the organogels obtained via the self-assembly of gelators in vegetable oils exhibited great thermal and rheology properties, which guaranteed their state in body. In vivo pharmacokinetic demonstrated that the organogel formulation could extend the drug release and maintain a therapeutically effective plasma concentration at least 10 d. In addition, this implant showed acceptable moderate inflammation. Conclusion: The in situ forming l-lysine-derivative-based organogel could be a promising matrix for sustained drug delivery of the drugs with low solubility.

A novel bolaamphiphile surfactant N,N′-(octane-1,8-diyl)bis(pyrrolidine-2-carboxamide) (DAOP), was designed and synthesized from proline and 1,8-diaminooctane, as the hydrophilic part and hydrophobic part, respectively. After separation and purification, the structures of the synthesized bola surfactants were verified by IR, MS and 1H NMR. The pKa was measured by a titration experiment, the turbidity was determined using a Shimadzu UV-1750 spectrophotometer, and the critical micelle concentration (CMC) values of the synthesized surfactants in water were obtained using the conductivity and fluorescence probe measurements. The synthesized bolaamphiphile surfactants demonstrate the ability of self-assemble to form vesicles that were confirmed with dynamic light scattering and transmission electron microscopy. The results showed that the novel bolaamphiphile surfactant derived from proline might potentially be an excellent carrier for drug delivery.

In the present study, three water-soluble drugs (propranolol hydrochloride, PNH; diltiazem hydrochloride, DZH; levofloxacin hydrochloride, LFH) with different number of hydrogen bonding acceptors were used as guest drug molecules, and three kinds of biomimetic synthesized nanoporous silica@poly(ethyleneimine)s xerogel (NS@P xerogel, 25%NS@P xerogel and 75%NS@P xerogel) were taken as host drug carriers. Mutural interaction formed between guest drug molecules and host drug carriers were investigated using a two-level three-factorial central composite design. The results confirmed that water-soluble drug loaded three nanoporous silica carriers presented the same regular controlled release effect, which was 75%NS@P xerogel>25%NS@P xerogel>NS@P xerogel. The main contribution to burst release was the pore diameter of host carrier. Accomplishment of cumulative release in 24h can be obtained when loading guest drug molecules with small number of hydrogen bonding acceptors to host carriers with either quite small or large pore diameter. The present work can favor to explore the mutural interaction between host carrier and guest drug molecules and thus promoted the development of nanoporous silica in pharmaceutical application.

The purpose of this study was to facilely develop amino modified mesoporous silica xerogel synthesized using biomimetic method (B-AMSX) and to investigate its potential ability to be a drug carrier for loading poorly water-soluble drug indomethacin (IMC). For comparison, mesoporous silica xerogel without amino modification (B-MSX) was also synthesized using the same method. The changes of characteristics before and after IMC loading were systemically studied using fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS) and nitrogen adsorption/desorption analysis. The results showed that B-MSX and B-AMSX were spherical nanoparticles with mesoporous structure. Compared with B-MSX, IMC loading capacity of B-AMSX was higher because more drug molecules can be loaded through stronger hydrogen bonding force. DSC and SAXS analysis confirmed the amorphous state of IMC after being loaded into B-MSX and B-AMSX. The in vitro drug release study revealed that B-MSX and B-AMSX improved IMC release significantly, and B-AMSX released IMC a little faster than B-MSX because of larger pore diameter of IMC-AMSX. B-MSX and B-AMSX degraded gradually in dissolution medium evidenced by color reaction and absorbance value, and B-AMSX degraded slower than B-MSX due to amino modification. In conclusion, B-AMSX with superiority of higher loading capacity and enhanced dissolution release can be considered to be a good candidate as drug carrier for IMC.

In the present work, control-release microcapsule of famotidine (FMT) loaded biomimetic synthesized mesoporous silica nanoparticles (B-MSNs) was developed, and controlled release effect and stomach adhesion of this formulation in vitro were mainly investigated. B-MSN was previously synthesized and it was amorphous mesoporous nanoparticles with helical channels. Cytotoxicity of B-MSN was studied using human breast cancer cells (MCF-7) and the result indicated that cytotoxicity of B-MSN can be neglected. After loading FMT into B-MSN, specific surface area, pore volume and pore diameter of B-MSN were obviously reduced. In vitro dissolution test showed that B-MSN had the ability to slow down FMT release for 15 min. In order to prolong controlled release effect and remained the advantage of B-MSN (improve drug stability due to its rigid silica framework), the combined application of control-release microcapsule (using cellulose and hydroxypropyl methylcellulose K15M as excipients) with B-MSN was designed. It was obvious that newly designed formulation significantly controlled FMT release with Fickian diffusion mechanism and showed enhanced stomach adhesion in vitro, which has significant value in widening the application of B-MSN in formulation design.

A series of core-shell mesoporous silica nanoparticles (MSN@Ms) were successfully prepared with reducing response environmental stimuli TEOS-BTES as a shell and mesoporous silica nanoparticles (MSN) as a core. The results demonstrated that both MSN and MSN@Ms possessed spherical mesoporous structure and good porosity. Moreover, the size of particles and thickness of shell can be regulated by BTES amount. Besides, Indomethacin (IMC) could be loaded into the silica carriers in amorphous state, and the IMC loading amount was positively correlated with the pore volume. The release profile illustrated that the TEOS-BTES shell coating on the surface of MSN could act as reducing activatable trigger to achieve control release, while MSN provided enough space to encapsulate IMC with high loading. It was also found that MSN and MSN@Ms could be degraded in vitro. Furthermore, both IMC-MSN and IMC-MSN@M2 could reduce the gastric mucosa irritation and improve the bioavailability of IMC, and IMC-loaded MSN had a higher bioavailability than IMC-loaded MSN@M2.

It is predictable that carriers presented with chiral structure can display different drug delivery effect, which is of great interest and novelty in material science and pharmacy. Herein, we synthesized functional mesoporous silica nanoparticles (F-MSNs) with molecular level chiral function property. The obtained levorotatory MSNs and dextrorotatory MSNs were named as FL-MSNs and FD-MSNs, respectively. To explore their special features in delivering drug molecules, drug delivery systems based on FL-MSNs and FD-MSNs were established by using nimesulide (NMS) as model drug. Characterization techniques, including Fourier Transform infrared spectrometer (FTIR), circular dichroism (CD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption/desorption measurement, were applied. The results showed that after loading NMS into FL-MSNs and FD-MSNs, most crystalline NMS converted to amorphous phase confirmed by differential scanning calorimeter (DSC) and X-ray power diffraction (XRD) analysis. Besides, FL-MSNs and FD-MSNs showed responses in corresponding chiral medium and FD-MSNs turned out to be the superior carrier. The superior chiral response performance of FD-MSNs was also confirmed using molecular simulation and wettability study. Finally, in vivo pharmacokinetics and anti-inflammatory pharmacodynamics studies indicated that both FL-MSNs and FD-MSNs could improve the oral bioavailability of NMS (698.45% and 887.03% respectively), and FD-MSNs delivered more NMS after making response to the in vivo environment and thereafter presented stronger anti-inflammatory pharmacodynamics performance.

In the present study, amino functionalized mesoporous silica (Amino-MSR) with twisted rod-like shapes was successfully fabricated using biomimetic method, and employed as poorly water-soluble drug ibuprofen (IBU) carrier. The formation mechanism of silica-based carriers was elucidated by molecular docking software. As potential drug carriers for oral delivery, its application as IBU carrier was intensively investigated in vitro and vivo and compared with non-functionalized mesoporous silica nanorod (MSR). The results demonstrated that electrostatic interaction, hydrogen bonding and hydrophobic interaction played significant roles in preparing MSR and Amino-MSR, especially the electrostatic interaction between -COO- of N-myristyl- l -alanine (N-MLA) and –NH3+ of 3-aminopropyltriethoxysilane (APTES), which strongly promoted the helical packing in the process of cooperative self-assembly. After incorporating into carriers, IBU successfully transformed from crystalline state to amorphous state. Compared with MSR (22.80%), Amino-MSR showed a high drug loading content (29.12%) due to the stronger hydrogen bonding force formed between the amino enriched nano-space and carboxylic acid moiety of IBU. Consequently, both the IBU release rate and amount were significantly improved in stimulated gastric fluid (SGF) medium. Particularly, Amino-MSR exhibited controlled drug release behavior because of the stronger host-guest interaction. Benefiting from the great advantages in improving the solubility of IBU and controlled drug release behavior, IBU/Amino-MSR exhibited better anti-inflammatory effect and higher relative bioavailability (203%).

The use of mesoporous silica nanoparticles (MSNs) in the field of oral drug delivery has recently attracted greater attention. However, there is still limited knowledge about how the shape of MSNs affects drug delivery capacity. In our study, we fabricated mesoporous silica nanorods (MSNRs) to study the shape effects of MSNs on oral delivery. MSNRs were characterized by transmission electron microscopy (TEM), nitrogen adsorption/desorption, Fourier transform infrared spectroscopy (FTIR), and small-angle X-ray diffraction (small-angle XRD). Indomethacin (IMC), a non-steroidal anti-inflammatory agent, was loaded into MSNRs as model drug, and the drug-loaded MSNRs resulted in an excellent dissolution-enhancing effect. The cytotoxicity and in vivo pharmacokinetic studies indicated that MSNRs can be applied as a safe and efficient candidate for the delivery of insoluble drugs. The use of MSNs with a rod-like shape, as a drug delivery carrier, will extend the pharmaceutical applications of silica materials.

Solvents, accounting the majority of the organogel system, have a tremendous impact on the characteristics of gels. To date, there is a large variety of organogel systems; relatively few have been investigated in the field of structure-solvent correlation. Here, a series of solvent parameters were applied to explore the role of solvent effect on network forming and gel property, intending to build the connection between the precise solvent parameter and gel property. Among the solvent parameters, Kamlet–Taft Parameters and Hansen solubility parameters can distinguish specific types of intermolecular interactions, which could correlate solvent parameter with the gel property. From an analysis of the morphologies obtained from POM and SEM, the gelator structure has an impact on its self-assembly. For possible conformations, the gelators were investigated through XRD. The investigation of solvent-property relationship will provide a theoretical basis for controllable drug delivery implants.

Thermogels, used as multi-functional drug-loading materials, have properties that mainly rely on their gelator structure. Although a large variety of organogel systems are used as drug delivery carriers, relatively few have been investigated in terms of their structure-property correlations based on amino acid derivative gelators. Here, a series of amino acid based gelators were synthesized to explore the role of the gelator structure on functional properties, with the aim of establishing a connection between the molecular parameters and gel properties. By varying the three substitutions of the gelator backbone, it was found that a comprehensive interaction, consisting of hydrophobic forces, H-bonding interactions, conformational flexibility and steric repulsion, play a crucial role in determining the gelation properties. Hansen solubility parameters were employed to explore the solvent effect on the network forming and gel properties. From an analysis of the morphologies obtained from polarized optical microscope (POM), atomic force microscopic images (AFM) and scanning electron microscopy (SEM), the gelator structure was found to have an impact on the self-assembly. According to the X-ray diffraction (XRD), the possible conformations adopted by the gelators were revealed through molecular modelling. The ability to form intermolecular H-bonding is vital in molecular packing and, thus, gelation. A structure-property relationship was developed and proposed to provide a theoretical basis for controllable drug delivery implants.

Objective: To evaluate parameters about wettability, water absorption or swelling of excipients in forms of powders or dosage through various methods systematically and explore its correlation with tablet disintegration. Material and methods: The water penetration and swelling of powders with different proportions of excipients including microcrystalline cellulose (MCC), mannitol, low-substituted hydroxypropyl cellulose (L-HPC), crospolyvinylpyrrolidone (PVPP), carboxymethyl starch sodium (CMS-Na), croscarmellose sodium (CCMC-Na) and magnesium stearate (MgSt) were determined by Washburn capillary rise. Both contact angle of water on the excipient compacts and surface swelling volume were measured by sessile drop technique. Moreover, the test about water absorption and swelling of compacts was fulfilled by a modified method. Eventually, the disintegration of tablets with or without loratadine was performed according to the method described in USP. Results and discussion: These parameters were successfully identified by the methods above, which proved that excipient wettability or swelling properties varied with the structure of excipients. For example, MgSt could improve the water uptake, while impeded tablet swelling. Furthermore, in the present study it is verified that tablet disintegration was closely related to these parameters, especially wetting rate and initial water absorption rate. The higher wetting rate of water on tablet or initial water absorption rate, the faster swelling it be, resulting in the shorter tablet disintegration time. Conclusion: The methods utilized in the present study were feasible and effective. The disintegration of tablets did relate to these parameters, especially wetting rate and initial water absorption rate.

The addition of surfactant in tablet was a well-defined approach to improve drug dissolution rate. While the selected surfactant played a vital role in improving the wettability of tablet by medium, it was equally important to improve the dissolution rate by permeation effect due to production of pores or the reduced inter-particle adhesion. Furthermore, understanding the mechanism of dissolution rate increased was significant. In this work, contact angle measurement was taken up as an alternative approach for understanding the dissolution rate enhancement for tablet containing surfactant. Ethylcellulose, as a substrate, was used to prepare tablet. Four surfactants, sodium dodecyl sulfate (SDS), sodium dodecylbenzenesulfonate (SDBS), dodecyltrimethylammonium bromide (DTAB), and sodium lauryl sulfonate (SLS), were used. Berberine hydrochloride, metformin hydrochloride, and rutin were selected as model drugs. The contact angle of tablet in the absence and presence of surfactant was measured to explore the mechanism. The dissolution test was investigated to verify the mechanism and to establish a correlation with the contact angle. The result showed that the mechanism was the penetration effect rather than the wetting effect. The dissolution increased with a reduction in the contact angle. DTAB was found to obtain the highest level of dissolution enhancement and the lowest contact angle, while SDS, SDBS, and SLS were found to be the less effective in both dissolution enhancement and contact angle decrease. Therefore, contact angle was a good indicator for dissolution behavior besides exploring the mechanism of increased dissolution, which shows great potential in formula screening.

Mesoporous silica nanoparticles (MSNs) have been widely used in biomedical applications. However, most studies have been limited to spherical MSNs, while non-spherical MSNs have never been rigorously studied. In this study, we fabricated mesoporous silica nanospheres (MSNSs) and mesoporous silica nanorods (MSNRs), with different aspect ratios (ARs) but identical surface chemistries to explore the shape effects of MSNs on oral delivery. The results of cellular studies demonstrated that MSNRs exhibited a higher cellular uptake than MSNSs. Mechanistic studies showed that caveolae-mediated endocytosis was involved in the uptake of MSNRs, while the clathrin-dependent pathway contributed to the endocytosis of MSNSs. Meanwhile, the apparent permeability coefficient value (Papp) of doxorubicin hydrochloride (Dox)-loaded MSNRs was approximately 1.8-, 3.2- and 6.3-fold higher than that of Dox-loaded MSNS1, Dox-loaded MSNS2 and Dox solution, respectively. The in vivo pharmacokinetics study showed that the area under the plasma concentration-time curve (AUC) achieved by Dox-loaded MSNRs was 1.9-, 3.4- and 5.7-fold higher than the corresponding values for Dox-loaded MSNS1, MSNS2 and Dox solution, respectively. Taken together, our results demonstrated that tuning nanoparticle shape potentially determines the biological fate of nanoparticles with higher delivery efficiency, such as enhanced cellular uptake and oral bioavailability.

The feasibility of polymer brush as drug delivery vehicle was demonstrated with the goal of improving the dissolution and physical stability of poorly water-soluble drugs. Polymer brush CTAB/ZB-1 was synthesized by electrostatic interaction using a physical modification method with anionic poly (propylene-g-styrene sulphonic acid) fiber (ZB-1) as the substrate and cationic hexadecyltrimethylammonium bromide (CTAB) as the modifier. The polymer brush structure of CTAB/ZB-1 was validated by atomic force microscopy (AFM) and the channels of brush provided the drug loading sites. Flurbiprofen (FP), a BCS class II representative drug, was selected as the model poorly water-soluble drug to be loaded into this polymer brush. Then the drug loading and release were systematically investigated. Besides, the transformation from crystalline FP to amorphous state was observed by differential scanning calorimeter (DSC). In vitro dissolution in pure water and pH1.2 HCl media with/without 0.1% sodium dodecyl sulfate (SDS) was tested. Moreover, the optimal formulations (namely carrier/drug ratios) were determined. The results demonstrated prominent improvement of dissolution when FP was released from CTAB/ZB-1. After a long time storage, FP remained amorphous in CTAB/ZB-1 according to DSC determinations and performed an approximately equivalent dissolution compared with fresh samples, suggesting the advantage of CTAB/ZB-1 as carrier in enhancing the physical stability of drugs. The study introduced the versatile easily formulated polymer brush CTAB/ZB-1 and demonstrated the potential of polymer brush as an alternative approach for improving the dissolution and physical stability of poorly water-soluble drugs.

In this study, twisted rod-like chiral mesoporous silicas (CMSs) with discriminating chiral characteristics (D/L) were designed and biomimetic synthesized by using L- and d -alanine derivatives as templates, and employed as poorly water-soluble chiral drug ibuprofen (IBU) carriers. The morphology and mesoscopic characteristics of CMSs were determined by transmission electron microscope (TEM) and small-angle X-ray scattering (SAXS). Meanwhile, the physicochemical properties of CMSs before and after drug loading were systematically characterized by infrared spectroscopy (IR), nitrogen adsorption, X-ray diffraction (XRD), differential scanning calorimetry (DSC) and induced circular dichroism (ICD). The results suggested that, the CMSs exhibited local chiral characteristics, which were successfully endowed by the alanine-derivative surfactants templates with a reversal of chirality. The crystalline state of IBU was effectively converted to amorphous state after being incorporated into CMSs, and the drug delivery systems shared the chiral characteristic of carriers. Besides, in vitro drug release experiments were respectively performed in simulated gastric fluid (SGF, pH 1) and simulated intestinal fluid (SIF, pH 6.8) medium, and the results demonstrated that both l -CMS and d -CMS could improve the dissolution of IBU in SGF medium, which could be explained by the amorphization of IBU. Particularly, due to the different pore geometry of these two materials, CMSs with different chirality (D/L) could be applied as carriers to accomplish drug release differentiation.

To investigate the modulation of the wettability of excipients by different types of surfactants and its impacts on the disintegration of tablets and drug release.The critical micelle concentration (CMC) of surfactants, including sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), dodecyl trimethyl ammonium bromide (DTAB), cetyltrimethyl ammonium bromide (CTAB) and polysorbate (Tween-20 and Tween-80), was obtained using the platinum ring method. Contact angles of surfactant solutions on the excipient compacts and double-distilled water on the mixture of surfactant and the other excipient (magnesium stearate (MgSt) or sodium alginate (SA)) were measured by the sessile drop technique. Besides, surface free energy of excipients was calculated by the Owens method. Finally, the disintegration of tablets and in vitro dissolution testing were performed according to the method described in USP.The wettability of excipients could be enhanced to different extent with low concentration of surfactant solutions and maintained stable basically after CMC. For MgSt (hydrophobic excipient), the shorter the hydrophobic chain (CThe modulation of the wetting of pharmaceutical excipients by surfactant had changed the disintegration time of tablets and drug release rate to a greater extent.

The in vitro degradation behavior of organogel with different gelators based on amino acid was investigated in detail. Two methods were applied in this research: weighting method and high-performance liquid chromatography with evaporative light scattering detection (HPLC-ELSD) method, which was established for the first time. Their degradation behaviors in vivo were investigated by varying the kind and concentration of gelators via subcutaneous implantation. The results showed that the stronger the gelation ability or the higher the gelator concentration, the slower the degradation rate of organogel. Moreover, the organogel prepared by oils with longer alkyl length degraded slower than that of the shorter ones, which also decreased in thermal stability and mechanical strength. The investigation on degradation process showed that the degradation rate was mainly controlled by the collapse of network structure formed by gelators. In conclusion, organogel had a tunable degradation rate through altering the gelator type, oil type and the gelator concentration. It remains a promising candidate for subcutaneous in-situ implant as drug delivery vehicle.

In this study, dual functionalized mesoporous silica nanoparticle (Dual-MSN) with functions of carboxyl modification and chirality was successfully developed and its special contribution in delivering doxorubicin hydrochloride (DOX) in vitro was mainly studied. Characteristics of Dual-MSN and its application as DOX carrier were intensively explored by comparing with naked non-functionalized MSN (Naked MSN). The results indicated that both Naked MSN and Dual-MSN significantly controlled DOX release due to the release hindrance caused by mesopores. As expected, Dual-MSN exhibited obvious enhanced pH-response because of its negative charges of carboxyl groups. DOX loaded Naked MSN and DOX loaded Dual-MSN presented better cytotoxicity than DOX due to carrier-mediated endocytosis and the favorable intercalation of DOX into DNA in the nuclei. The cytotoxicity of DOX loaded Dual-MSN was better than DOX loaded Naked MSN owing to its enhanced cellular uptake induced by chirality of Dual-MSN, demonstrating that double functions of Dual-MSN had unique advantages in improving antitumor effect of DOX towards MCF-7 cells and thus confirming its special contribution in DOX delivery.

The present paper innovatively reports bimodal nanoporous silica synthesized using biomimetic method (B-BNS) with synthesized polymer (C16-L-serine) as template. Formation mechanism of B-BNS was deeply studied and exploration of its application as carrier of poorly water-soluble drug ibuprofen (IBU) was conducted. The bimodal nanopores and curved mesoscopic channels of B-BNS were achieved due to the dynamic self-assembly of C16-L-serine induced by silane coupling agent (3-aminopropyltriethoxysilane, APTES) and silica source (tetraethoxysilane, TEOS). Characterization results confirmed the successful synthesis of B-BNS, and particularly, nitrogen adsorption/desorption measurement demonstrated that B-BNS was meso-meso porous silica material. In application, B-BNS loaded IBU with high drug loading content due to its enlarged nanopores. After being loaded, IBU presented amorphous phase because nanoporous space and curved mesoscopic channels of B-BNS prevented the crystallization of IBU. In vitro release result revealed that B-BNS controlled IBU release with two release phases based on bimodal nanopores and improved dissolution in simulated gastric fluid due to crystalline conversion of IBU. It is convincible that biomimetic method provides novel theory and insight for synthesizing bimodal nanoporous silica, and unique functionalities of B-BNS as drug carrier can undoubtedly promote the application of bimodal nanoporous silica and development of pharmaceutical science.