Search

Extensive efforts have been made to harvest energy from water in the form of raindrops1–6, river and ocean waves7,8, tides9 and others10–17. However, achieving a high density of electrical power generation is challenging. Traditional hydraulic power generation mainly uses electromagnetic generators that are heavy, bulky, and become inefficient with low water supply. An alternative, the water-droplet/solid-based triboelectric nanogenerator, has so far generated peak power densities of less than one watt per square metre, owing to the limitations imposed by interfacial effects—as seen in characterizations of the charge generation and transfer that occur at solid–liquid1–4 or liquid–liquid5,18 interfaces. Here we develop a device to harvest energy from impinging water droplets by using an architecture that comprises a polytetrafluoroethylene film on an indium tin oxide substrate plus an aluminium electrode. We show that spreading of an impinged water droplet on the device bridges the originally disconnected components into a closed-loop electrical system, transforming the conventional interfacial effect into a bulk effect, and so enhancing the instantaneous power density by several orders of magnitude over equivalent devices that are limited by interfacial effects. A device involving a polytetrafluoroethylene film, an indium tin oxide substrate and an aluminium electrode allows improved electricity generation from water droplets, which bridge the previously disconnected circuit components.

Vortex-induced vibration (VIV) is used by piezoelectric energy harvesters to generate electricity from wind and water flow. In this study, we introduce the nonlinear magnetic force into piezoelectric energy harvesters and develop a nonlinear monostable piezoelectric VIV transducer. We build a distributed-parameter model based on the Euler-Bernoulli beam theory and Kirchhof's law to analyze the dynamic responses of the magnetic-coupling piezoelectric energy harvester (MCPEH). Model results show that the performance of the MCPEH varies greatly with the increase of the load resistance and the length of the used PZT. There are two optimal resistance values for the MCPEH. When $R

The pyroelectric effect provides an efficient route to convert low-grade waste heat into electricity. (Bi0.5Na0.5)TiO3-based ceramic is one of the most attractive lead-free pyroelectric candidates due to its high polarization. However, the low breakdown strength (BDS) restricts its ability to achieve a high polarization, hindering the application for thermal energy harvesting based on the Olsen cycle. In this work, by incorporation of AlN into BNT-BZT ceramics to form the BNT-BZT: AlN composites, the BDS is enhanced from 160 kV cm−1 to 260 kV cm−1, leading to a high energy density of 1.54 J cm−3 which is ∼5 times that of the pristine BNT-BZT. The reason for the high energy harvesting performance is due to the addition of AlN that can depress the conductivity of the matrix, resulting in the high BDS that permits high electric fields to be applied on the samples to induce high polarization that changes pronouncedly with temperature.

This paper compares the performance of three nonlinear compliant orthoplanar springs, namely, bi-leg, quad-leg and pent-leg designs to study the vibration mode interaction effect for widening the operational bandwidth of piezoelectric vibration energy harvester. All the designs have three or more vibration modes below 150 Hz with the addition of multiple masses. Finite element analysis results of spring designs and vibration mode shapes are presented and compared with experiments. The prototypes were manufactured and experimentally tested to analyze their dynamic voltage-frequency responses and operational bandwidths under sinusoidal and band-limited excitations. The experimental results demonstrate that the operational bandwidth is significantly broadened by the geometric nonlinearity of the structure. The addition of multiple masses brings the vibration modes of the system closer, and thus further helps to extend the operational bandwidth. In addition, we introduce multiple piezoelectric plates into harvesters to enable energy harvesting in all vibration modes. The quad-leg design shows the largest frequency bandwidth of 35 Hz, maintaining a peak-to-peak voltage of 4 V under the forward frequency-sweep excitations. Under the reverse frequency-sweep excitations, the voltage response and the operational bandwidth are comparable to those of the forward-sweep ones as a result of continuous overlapping of linear and nonlinear voltage peaks. Random excitation experiments demonstrate the effectiveness of the proposed mutli-leg structure in harvesting energy from wideband environmental vibrations.

In this paper, we propose a truss-based compressive-mode piezoelectric energy harvester to harness energy from low frequency vibrations with a wide bandwidth and a high-power output. The design is an integration of mainly three modules: separated excitation mechanism from transduction mechanism for low resonant frequency, truss mechanism for magnification of the applied force onto the piezoelectric element, and amplitude limit mechanism to induce impact forces. We then formulate the harvester as a two-degrees-of-freedom system featured by superposition of harmonic and impact-induced nonlinear responses. Based on our structure design, we fabricate a prototype to conduct experimental studies. The experimental results show that the harvester is capable of harnessing energy efficiently from vibrations at the resonant frequencies of 3.3 and 6.09 Hz. The total bandwidth is expanded to 4.2 Hz owing to the structure nonlinearity and bifurcation. The open circuit voltage reaches 83.3 V and maximum power gets up to 38.2 mW with the matching impedance. Also, the harvester exhibits excellent charging performance in terms of saturated voltage and charging time.

Piezoelectric materials enable emerging self-powered wearable and implantable devices. The sol-gel technology with the lowest cost for large-scale production has shown its potential for producing high-quality PZT thin films. However, fabricating PZT films with a sufficient thickness for different application scenarios requires a long and repeated coating and heat-treatment process. The traditional solution-based method usually requires at least 20 coating cycles to fabricate 2 μm-thick PZT thin films. To save cost and improve fabrication efficiency, we develop a simplified thin-film fabrication method assisted by PZT powder. The new method can fabricate 2 μm-thick PZT films in a single step, one spin coating and annealing. Experiments indicate that the powder-based PZT thin films have porous structures and outstanding piezoelectric performances. The measured d33 of the powder-based PZT thin film is 47 pm/V. Both solution-based and powder-based PZT thin films show high flexibility and good fatigue resistance. Furthermore, we explore 2D mica as the substrate and achieve the transfer-free fabrication of flexible PZT thin-film nanogenerators that effectively simplify the complicated physical or chemical thin-film lift-off processes. The nanogenerator prototypes demonstrate the capability of accurately monitoring dynamic responses of flexible and soft human tissues.

The soft millirobot is a promising candidate for emerging applications in various in‐vivo/vitro biomedical settings. Despite recent success in its design and actuation, the absence of sensing ability makes it still far from being a reality. Here, a radio frequency identification (RFID) based battery‐less soft millirobot that can move, sense, and communicate remotely by coupling the magnetic and piezoelectric effects is reported. This design integrates the robot actuation and power generation units within a thin multilayer film (, The soft millirobot is a promising candidate for emerging applications in various in‐vivo/vitro biomedical settings. This work reports a radio frequency identification (RFID) based battery‐less soft millirobot that can move, sense, and communicate remotely by coupling the magnetic and piezoelectric effects, which benefits a broad spectrum of promising applications, such as in‐body monitoring, diagnosis, and drug delivery.

Electronic skin made of thin, soft, stretchable devices that can mimic the human skin and reconstruct the tactile sensation and perception offers great opportunities for prosthesis sensing, robotics controlling, and human-machine interfaces. Advanced materials and mechanics engineering of thin film devices has proven to be an efficient route to enable and enhance flexibility and stretchability of various electronic skins; however, the density of devices is still low owing to the limitation in existing fabrication techniques. Here, we report a high-throughput one-step process to fabricate large tactile sensing arrays with a sensor density of 25 sensors/cm 2 for electronic skin, where the sensors are based on intrinsically stretchable piezoelectric lead zirconate titanate (PZT) elastomer. The PZT elastomer sensor arrays with great uniformity and passive-driven manner enable high-resolution tactile sensing, simplify the data acquisition process, and lower the manufacturing cost. The high-throughput fabrication process provides a general platform for integrating intrinsically stretchable materials into large area, high device density soft electronics for the next-generation electronic skin.

In this paper, we report a hybrid generator to harness energy from low-frequency ambient vibrations. The generator is designed with a piezoelectric energy harvester (PEH) patch, a triboelectric nanogenerator (TENG) patch, a spring-mass system and an amplitude limiter. The spring-mass system receives energy from excitations and applies forces to the piezoelectric element and the triboelectric layers. The unique amplitude limiter is deliberately introduced into the system, not only achieving the desired frequency up-conversion effect, but also boosting the voltage responses significantly. The limiter also causes hardening nonlinearity and dynamic bifurcation triggering superharmonic resonance so that the generator resonates at a frequency of about 3 Hz. Furthermore, the proposed PEH adopts the strong compressive operation mode, and employs a truss mechanism to effectively amplify the impact forces. In experiments, open-circuit voltages are 58.4 V from PEH and 60 V from TENG under an excitation of 1.0 g at resonance. The hybridized generator is capable of achieving a maximum power of 19.6 mW from the two sources with matched impedances. The working bandwidths of the PEH and the TENG reach up to 5.39 Hz and 7.25 Hz, respectively, out of our targeted frequency domain [2.5 Hz, 10 Hz] due to the multiple resonances and nonlinearity. In the applications to charge capacitors, the high saturation voltage and relatively short charging time validate the effectiveness of our power management technique. Furthermore, the generator proves to be able to effectively scavenge energy from human body motions and charge a capacitor of 4.7 μF to 7.6 V in around 50 s, which indicates a great potential of practical applications in wearable devices.

Over the centuries, scientists and engineers have been fascinated by the directional transport of water on the peristome of pitcher plant. Through experimental investigation and theoretical analysis, here we reveal the more complex picture of droplet transport on this peculiar natural surface. First, we demonstrate that in addition to the presence of the asymmetric arch-shaped microcavity with gradient wedge corners and sharp edges, the structural gradient in the first-tier microgroove of the pitcher’s peristome also plays an important role in the regulation of the directional droplet transport. Moreover, the directional liquid transport only occurs in a limited condition. Without the intricate control of the interplay between its multiscale structures and multiscale sources of water, as well as the dynamic conditions of water, the preferential directional droplet transport will collapse. The new transport phenomenon and the mechanisms we reveal will provide important insights for the design of asymmetric morphologies for droplet manipulation. The way many natural surfaces transport water has been a fascinating subject for many centuries. The paper presents an experimental and theoretical investigation of droplets transport on the peristome of pitcher plants and shows that this depends on the multiscale structures of both the surface and the water.

Energy harvesting holds great potential to achieve long-lifespan self-powered operations of wireless sensor networks, wearable devices, and medical implants, and thus has attracted substantial interest from both academia and industry. This paper presents a comprehensive review of piezoelectric energy-harvesting techniques developed in the last decade. The piezoelectric effect has been widely adopted to convert mechanical energy to electricity, due to its high energy conversion efficiency, ease of implementation, and miniaturization. From the viewpoint of applications, we are most concerned about whether an energy harvester can generate sufficient power under a variable excitation. Therefore, here we concentrate on methodologies leading to high power output and broad operational bandwidth. Different designs, nonlinear methods, optimization techniques, and harvesting materials are reviewed and discussed in depth. Furthermore, we identify four promising applications: shoes, pacemakers, tire pressure monitoring systems, and bridge and building monitoring. We review new high-performance energy harvesters proposed for each application.

This paper presents a novel buckled compressive-mode piezoelectric energy harvesting device (BC-PEH) to improve the energy harvesting capability. The BC-PEH synthesizes the merits of the force amplification effect of the flexural motion and the broad bandwidth of buckled-beam structures. In this paper, both theoretical and experimental investigations are performed on the BC-PEH, under both harmonic and random excitations. Taking negative stiffness, nonlinear damping and nonlinear piezoelectric coupling into account, we build an analytical model that provides a comprehensive insight into the nonlinear electromechanical coupling system. The influence of parameters on the performance is thoroughly discussed via the harmonic balance method and numerical technique. The analytical results closely render the experimental data and demonstrate a considerable performance enhancement. Compared with state-of-the-art energy harvesters, the BC-PEH prototype not only exhibits its superiority in terms of power density, normalized power density and power normalized by mass and acceleration, but also indicates a 194% broader working bandwidth.

We proposed a nonlinear multi-mode tri-leg compliant orthoplanar spring piezoelectric vibration-based energy harvester (COPS-PVEH), which provided the improved performance using a pure geometric nonlinearity, in terms of a wide bandwidth, and a high-voltage output in forward and reverse sweeps. This paper presents an application of magnetic force interaction to further enhance the performance of the COPS-PVEH. A repulsive magnetic force is added to the spring to change the harvester system’s stiffness. A lumped parameter model is derived and analytically solved for the designed harvester with a magnetic coupling. The experiments are carried out by adding a moving magnet at the center of the spring and a pair of fixed magnets at the top and bottom sides of the harvester. Both experimental data and simulation results show the benefits brought through the dynamics of a magnetic oscillator. In an experiment by adding magnetic force, a slight increase is observed in the operating bandwidth and a 10% increase in the magnitude of voltage output is achieved at the same excitation level. The magnetic interaction on the COPS-PVEH with an addition of multiple masses has also achieved an increase in voltage output and bandwidth. In addition, the gap between the three vibration modes has been reduced.

This paper presents the modeling and experimental parametric study of a nonlinear multi-frequency broad bandwidth piezoelectric vibration-based energy harvester. The proposed harvester consists of a tri-leg compliant orthoplanar spring (COPS) and multiple masses with piezoelectric plates attached at three different locations. The vibration modes, resonant frequencies, and strain distributions are studied using the finite element analysis. The prototype is manufactured and experimentally investigated to study the effect of single as well as multiple light-weight masses on the bandwidth. The dynamic behavior of the harvester with a mass at the center is modeled numerically and characterized experimentally. The simulation and experimental results are in good agreement. A wide bandwidth with three close nonlinear vibration modes is observed during the experiments when four masses are added to the proposed harvester. The current generator with four masses shows a significant performance improvement with multiple nonlinear peaks under both forward and reverse frequency sweeps.

As a typical ferroelectric material, the PbZr1−xTix O3 (PZT) thin film with a homogeneous component has drawn extensive attention to the application in self-powered flexible electronics. The design of compositionally graded PZT thin films (i.e. artificially control the Zr/Ti ratio in different compositional layers in one film) has shown its immense potentials due to some novel phenomena induced by strain gradient, such as the shifted hysteresis loop, generation of the built-in electric field, enhancement in the motion of domain wall. However, the effect of the compositionally graded heterostructure on the piezoelectric response and its performance on the device level has seldom been investigated. To fill this knowledge gap, we prepare PZT thin films with the compositionally graded structure and based on that, fabricate flexible piezoelectric nanogenerators (PENGs). Furthermore, we explore the 2D mica as the substrate of PENGs and avoid the commonly used costly and troublesome laser-lifting or etching transfer procedure. The PENG prototypes integrated with 1 µm thick PZT films are flexible, translucent, and show high electric responses under different mechanical stimuli. Experiments indicate that up-graded PZT films, of which Zr composition varies from 20% near the bottom to 80% at the top, outperforms the down-graded counterpart. The up-graded PENG achieves a maximum voltage response of 2 V and a current density of 10.0 μA/cm2 when bent by 90 ° . This work demonstrates that the strain-tuned compositionally graded structure is an effective approach to improve the PENG performance.

Piezoelectric energy harvesting technology is regarded as a remedy to the short-life battery issue in low-power electronic devices, and has been extensively studied in the past two decades. Although a variety of new structures and mechanisms have been proposed for piezoelectric energy harvesters (PEHs), there is not much progress made on the piezoelectric materials that play a determinant role in PEHs performance. Most energy harvesters are still constructed with lead zirconate titanate (PZT). Recently, the new-generation piezoelectric materials PMN-PT and PZN-PT single crystals are proposed and start to be used in transducers. Their electromechanical coupling factor ( k 33 ) is over 90%, and the piezoelectric coefficient ( d 33 ) can reach three times of that of PZT. This study characterizes the PMN-PT and PZN-PT single crystals used in energy harvesters, compared with the polycrystalline PZT, in terms of charging capacitors. Systematic discussions are presented on the voltage, power and energy responses, as well as the reverse coupling effect on the mechanical response and the self-discharge effect of capacitors. Furthermore, a self-powered synchronized switch harvesting on inductor (SSHI) circuit is constructed and tested with the new single-crystal based energy harvesters. Experiments indicate that PMN-PT and PZN-PT can significantly boost the charging capability of energy harvesters, and that performance can be further enhanced by the SSHI circuit.

Piezoelectric energy harvesting is envisioned as an ideal complement to batteries for long-life operation of wireless or remote electronic devices. Most piezoelectric energy harvesters (PEHs) utilize piezoelectric plates or discs as the energy transducing elements, and they cannot generate enough power for most potential applications. In this study, we explore a new way of using arc-shaped piezoelectric patches as the core transducing elements in energy harvesters to improve their performance. An analytical model is developed via the Castigliano’s theorem to elucidate the low stiffness characteristic of the arc-shaped structure. A finite element analysis is conducted, and the results indicate that high and evenly-distributed stress can be easily induced in the arc-shaped PEHs. Prototypes are fabricated with arc-shaped piezoelectric elements and flat piezoelectric plates, respectively, and tested under the same conditions. The experimental data demonstrate that the arc-shaped PEHs are capable of generating 2.55–4.25 times as much power as the equivalent flat-plate PEHs. This study lays the foundation to enhance energy harvester performance by utilizing arc-shaped piezoelectric structures.

Energy harvesting is an essential technology for enabling low-power, maintenance-free electronic devices, and thus has attracted a great deal of attention in recent years. A variety of designs and approaches have been proposed to harvest ambient vibration energy, but crucial questions remain regarding figures of merit characterizing the performance of energy harvesters. Of primary importance is the energy conversion efficiency. There are large discrepancies in the definition and tested values of efficiency in the literature. This study is intended to answer the fundamental question for energy harvesters: how to define and calculate the energy conversion efficiency. We first review studies on efficiency and analyze the energy flow in an energy harvesting system. Based on the analysis, we derive an efficiency expression for linear cantilever energy harvesters. The developed efficiency expression transparently and quantitatively reveals the relationship between efficiency and key parameters. Experiments are performed to validate the efficiency expression. Furthermore nonlinear energy harvesters are tested in both on-resonance and off-resonance conditions. Both experimental and theoretical studies manifest that the energy conversion efficiency tends to decrease as the excitation frequency rises and its value is related to the phase difference between excitations and responses. Around resonance states where the phase difference of both linear and nonlinear energy harvesters is about 90 degrees, the efficiency calculation is much simplified.

Vibration energy harvesting has been a research subject of growing interest over the past few years, and is envisaged as a remedy to the unsatisfactory battery issue in low-power electronic devices. In this study, we propose a new magnetostrictive transducer to harvest energy from finger tapping. Galfenol is selected as the transducing material due to its high piezomagnetic coefficient and excellent machinability. To effectively harness energy in low-frequency conditions, we develop a frequency up-conversion mechanism that succeeds in converting vibration below 10 Hz from finger tapping up to the system's resonance of a few hundred Hz. Furthermore, multiple impacts are induced in each working cycle deliberately to boost the efficiency. A comprehensive model is built and solved to analyze the mechanical-magnetic-electrical coupling system. Based on the model, we elucidate the design criteria for high-performance magnetostrictive transducers. A prototype is fabricated with a Galfenol beam of 0.5 × 5 × 25 mm 3 and, under finger tapping, it generates 5.3 mW power and instantaneously lights up 10 commercial LEDs and a numeric LCD.

In this article, we report a wearable millimeter-size energy generator that yields instantaneous power of 2.1 W level from kinetic energy of human running motions. The generator, with a hybridization of piezoelectric and electromagnetic transductions, integrates mainly two major novel techniques: impact induced frequency up conversion effect for the piezoelectric generation and abrupt magnetic flux density change for the electromagnetic generation. The generator proves to be able to effectively harness energy from human motions, producing a power density over one order of magnitude higher than that of state-of-the-art work. This result is further validated by the charging performance, i.e. high charging rate and voltage into mF-level capacitors. Moreover, this wearable generator demonstrates the capability to charge a Li-on battery in dozens of minutes. This work can be of much significance for the development of self-charging battery powered wearable electronic devices.

The rainbow trapping effect demonstrates great potential in multiple-band energy harvesting. However, the existing finite-size devices with the rainbow trapping phenomenon hardly harvest energy efficiently due to the mismatch between rainbow trapping frequencies and resonance frequencies of the devices. In this study, for the first time, we report a periodically perforated metamaterial beam, which achieves both the flexural wave rainbow trapping and resonance simultaneously for the multiple-band and multiple-position energy harvesting. The band structure of the unit cell in the metamaterial beam is analyzed to illustrate its ability to realize strong dispersion and energy concentration. The study first indicates that the rainbow trapping effect activated by resonance frequencies causes much more intense spatial separation and localization of flexural waves compared with that by cutoff frequencies for the periodically perforated bare beam. We, then, demonstrate that the resonance rainbow trapping phenomenon allows the proposed design to show superiority in piezoelectric energy harvesting compared with the counterpart with off-resonance rainbow trapping. Simulations indicate that the optimal resistance and the highest output power vary much for different pairs of piezoelectric patches at the corresponding resonance rainbow frequencies; by contrast, the positions of piezoelectric patches have little influence on the performance of the device. The design concept of on-resonance rainbow trapping in metamaterials in this study will help engineers to open a new venue for high-performance piezoelectric energy harvesters.

Nonlinear vibration is capable of effectively extending the frequency bandwidth of energy harvesters. Either hardening or softening nonlinearity has been used in various designs to achieve broad-bandwidth energy harvesting. In this paper, we propose a new method to achieve reversible hysteretic responses, i.e., both hardening and softening nonlinear responses, mechanically without additional magnetic interactions. This tunable nonlinearity endows energy harvesters with a great adaptability to environment. The proposed energy harvester is composed of a flexural center and two mass blocks, supported by a pair of elastic rods that are fixed on a vibration base. Different nonlinear responses are invoked by tilting the fixed–fixed elastic rods at different angles. A lumped-parameter model is developed to simulate the nonlinear electromechanical coupling system, and that is analytically solved by virtue of the high-order perturbation technique. The dynamic responses under different frequencies and accelerations are analytically characterized and compared well with the experimental data measured from a fabricated prototype. Furthermore, a nonlinear conditioning circuit (self-powered series synchronized switch harvesting on inductor) is constructed and tested with the proposed nonlinear energy harvester, with which the performance is enhanced about 200% for both resistive loads and capacitive loads.

Vibration energy harvesting has a great potential to achieve self-powered operations for wireless sensors, wearable devices and medical electronics, and thus has attracted much attention in academia and industry. The majority of research into this subject has focused on the piezoelectric effect of synthetic materials, especially the perovskite PZT ceramics. Recently the new-generation piezoelectric materials PMN-PT and PZN-PT single crystals have gained significant interest because of their outstanding piezoelectric properties. They can be used to replace the widely-adopted PZT ceramics for improving energy harvesters’ performance substantially. However, there is little research on comparing PMN-PT and PZN-PT energy harvesters against PZT harvesters. In this paper, we present a systematic comparison between vibration energy harvesters using the PMN-PT, PZN-PT single crystals and those using the PZT ceramics. Key properties of the three materials are summarized and compared. The performance of the PMN-PT and PZN-PT energy harvesters is characterized under different conditions (beam length, resistance, frequency, excitation strength, and backward coupling effect), and is quantitatively compared with the PZT counterpart. Furthermore, the effect of the synchronized switch harvesting on inductor (SSHI) circuit on the three harvesters is discussed. The experimental results indicate that energy harvesters using the PMN-PT and PZN-PT single crystals can significantly outperform those using the PZT ceramics. This study provides a strong base for future research on high-performance energy harvesters using the new PMN-PT and PZN-PT single crystals.

Piezoelectric energy harvesters have great potential for achieving inexhaustible power supply for small-scale electronic devices. However, the insufficient power-generation capability and the narrow working bandwidth of traditional energy harvesters have significantly hindered their adoption. To address these issues, we propose a nonlinear compressive-mode piezoelectric energy harvester. We embedded a multi-stage force amplification mechanism into the energy harvester, which greatly improved its power-generation capability. In this article, we describe how we first established an analytical model to study the force amplification effect. A lumped-parameter model was then built to simulate the strong nonlinear responses of the proposed energy harvester. A prototype was fabricated which demonstrated a superior power output of 30 mW under an excitation of 0.3 g ([Formula: see text] m/s2). We discuss at the end the effect of geometric parameters that are influential to the performance. The proposed energy harvester is suitable to be used in low-frequency weak-excitation environments for powering wireless sensors.

We propose a new concept for harvesting vibration energy from multiple directions. Our approach effectively exploits the nonlinear vibration of a doubly clamped elastic rod, converting and amplifying excitations to compressive loads in piezoelectric materials. The proposed multidirectional compressive-mode piezoelectric energy harvester (MC-PEH) is capable of isotropically harnessing vibration energy from any angle in a plane. Meanwhile, the MC-PEH demonstrates a high-voltage output and a wide working bandwidth, along with the distinct softening nonlinear phenomena. Theoretical analysis and experimental testing are performed and exhibit good agreement over a range of excitation frequencies. This study enhances the practicability and adaptability of using energy harvesters in a complex environment.

Sensors that provide critical information about jet engine performance are widely installed on static components but are rarely found on rotors because of their inaccessibility and extremely high rotation speeds. We present a new monitoring method, integrating energy harvesting technology with wireless sensors to achieve real-time self-powered engine monitoring. Energy harvesters, used to generate power from ambient vibration, are sustainable alternatives to batteries for achieving self-sustained long-term operation of electronic devices. By utilising structural nonlinearity, force amplification mechanism, and the piezoelectric effect, we show a 22.52-g energy harvester capable of high power output (78.87 mW), broad working bandwidth (22.5 Hz), and strong reliability (2100 RPM). Our approach breaks limitations from wired connections that are weighty and vulnerable to failures. We theoretically and experimentally analyse the nonlinear responses and demonstrate the harvester by constantly lighting 112 LEDs and a self-powered wireless sensor system in a jet engine. This work paves a new way for developing future monitoring systems for advanced jet engines and other rotating machinery applications.

Researchers have recently focused on improving the efficiency of piezoelectric energy harvesters by redesigning their substrate beams. Two approaches have been explored, including changing the shape of the cross-section area, i.e., width variation, and changing the thickness of cantilever beams. The width changing approach suffers from the deduction of output power from the piezoelectric elements of the trimmed-off regions, while performance deterioration does not occur in the thickness-variable approach. The benefit of thickness-variable beams on energy harvesting has been analyzed theoretically, but its detailed experimental study is still absent. In this study, we for the first time fabricate a thickness-variable harvester based on the Garolite FR-4 epoxy laminate, and validate the superiority of the variable thickness beam on the harvester performance enhancement. A theoretical model is developed based on the Euler-Bernoulli beam theory and numerically solved via the Rayleigh-Ritz method. We compare the thickness-variable composite beam configuration with a conventional uniform-thickness counterpart and unveil the beneficial effect of evenly-distributed strain on performance enhancement. Experiments indicate that the thickness-variable method increases on the energy harvester efficiency by 78%.

Flow-induced energy harvesting has attracted more and more attention among researchers in both fields of the wind and the fluid. Piezoelectric energy harvesters and triboelectric nanogenerators are exploited to obtain superior performance and sustainability, and the electromagnetic conversion has been continuously improved in the meantime. Aiming at different circumstances, researchers have designed, manufactured, and tested a variety of energy harvesters. In this paper, we analyze the state-of-the-art energy harvesting techniques and categorize them based on the working environment, application targets, and energy conversion mechanisms. The trend of research endeavors is analyzed, and the advantages, existing problems of energy harvesters, and corresponding solutions of energy harvesters are assessed.

In this paper, a hinge mechanism is introduced into one compressive-mode piezoelectric energy harvester to improve its performance. First, the concept of implementing hinge mechanisms is introduced on a high-efficiency compressive-mode piezoelectric energy harvester (HC-PEH). Second, a numerical model based on the piezoelectric constitutive equation and the Duffing oscillator equations is formulated to obtain voltage responses, velocity responses, and the fundamental frequency and bandwidth. Then, a prototype is fabricated to validate the results of the model. Depending on the number of hinges applied to the HC-PEH, three cases are investigated: fully hinged, partially hinged, and clamped. In both numerical modeling and experimental studies, the HC-PEH prototypes in the three cases are exposed to frequency-sweep excitations to illustrate the dynamic and transduction behaviors. The results demonstrate that the overall performance in the hinged cases is improved significantly compared to that in the clamped case. The output voltage and output power are increased by 2–3 times and up to 5 times, respectively, and fundamental resonant frequency is lowered to below 20 Hz. Furthermore, it is shown that the operational bandwidth is widened by up to 37%.

This paper presents the modeling and parametric analysis of the recently proposed nonlinear compressive-mode energy harvester (HC-PEH) under harmonic excitation. Both theoretical and experimental investigations are performed in this study over a range of excitation frequencies. Specially, a distributed parameter electro-elastic model is analytically developed by means of the energy-based method and the extended Hamilton’s principle. An analytical formulation of bending and stretching forces are derived to gain insight on the source of nonlinearity. Furthermore, the analytical model is validated against with experimental data and a good agreement is achieved. Both numerical simulations and experiment illustrate that the harvester exhibits a hardening nonlinearity and hence a broad frequency bandwidth, multiple coexisting solutions and a large-amplitude voltage response. Using the derived model, a parametric study is carried out to examine the effect of various parameters on the harvester voltage response. It is also shown from parametric analysis that the harvester’s performance can be further improved by selecting the proper length of elastic beams, proof mass and reducing the mechanical damping.

Harvesting ambient vibration energy is a promising method for realizing self-powered autonomous operation for low-power electronic devices. Most energy harvesters developed to date employ bending-beam configurations and work around the resonant points. There are two critical problems that have hindered the widespread adoption of energy harvesters: insufficient power output and narrow working bandwidth. To overcome these problems, we proposed a novel energy harvester, called a high-efficiency compressive-mode piezoelectric energy harvester (HC-PEH). The HC-PEH delicately synthesizes the merits of the force amplification effect of the flexural motion and the dynamic properties of elastic beams, and thus is capable of high power output with wide working bandwidth. In this paper, theoretical and experimental studies were performed on the HC-PEH. Taking nonlinear stiffness, nonlinear damping, and nonlinear piezoelectricity into account, we developed an analytical model that provides comprehensive insight into the nonlinear mechanical and electrical behaviors of the system. The analytical results closely render the experimental data and demonstrate great performance enhancement. In the experiment, a maximum power output of 54.7 mW is generated at 26 Hz under an acceleration of 4.9 m s−2, which is over one order of magnitude higher than other state-of-the-art systems.