Search

In this paper, we scrutinize unprecedented potential of transition metal carbides (TMCs) and nitrides (TMNs) for realization of light perfect absorption in an ultra-broad frequency range encompassing all of the visible (Vis) and near infrared (NIR) regions. For this purpose, two different configurations which are planar and trapezoidal array are employed. To gain insight on the condition for light perfect absorption, a systematic modeling approach based on transfer matrix method (TMM) is firstly utilized. Our modeling findings prove that the permittivity data of these TMCs and TMNs are closely matched with the ideal data. Thus, they can have stronger and broader absorption behavior compared to metals. Besides, these ceramic materials are preferred to metals due to the fact that they have better thermal properties and higher durability against erosion and oxidation than metals. This could provide the opportunity for design of highly efficient light harvesting systems with long-term stability. Numerical simulations are conducted to optimize the device optical performance for each of the proposed carbides and nitrides. Our findings reveal that these ceramic coatings have the broadest absorption response compared to all lossy and plasmonic metals. In planar configuration, titanium carbide (TiC) has the largest absorption bandwidth (BW) where an absorption above 0.9 is retained over a broad wavelength range of 405–1495 nm. In trapezoid architecture, vanadium nitride (VN) shows the widest BW covering a range from 300 to 2500 nm. The results of this study can serve as a beacon for the design of future high-performance energy conversion devices including solar vapor generation and thermal photovoltaics where both optical and thermal requirements can be satisfied. TÜBİTAK

In this Letter, we demonstrate strong light emission from defective hexagonal boron nitride (hBN) defect centers upon their coupling with disorder near-touching plasmonic units. Based on numerical simulations and characterization results, the plasmonic design at thin layer thicknesses of 20 nm can provide above 2 orders of magnitude enhancement in photoluminescence (PL) spectra. Moreover, this plasmonic platform shortens the luminescence lifetime of the emitters. The proposed design can be easily extended to other plasmonic-emitter combinations where strong light-matter interaction can be achieved using large-scale compatible routes. (C) 2021 Optical Society of America

In this Letter, we numerically propose a temperature-tunable, ultra-narrowband one-way perfect near-infrared radiation absorber with high transmission in the longer wavelength neighboring spectral range. We obtained this functionality by using a guided-mode resonance-based grating-waveguide metamirror that is comprised of silicon, a spacer dielectric, an absorbing semiconductor, and germanium. Within the ultra-narrow bandwidth of the guided-mode resonance excited at 1.16 µm with a full width at half-maximum of 3.3 nm, we confirmed perfect absorption when light is incident from one of the two opposite directions. Excitation from the opposite direction resulted in perfect reflection. The thickness of the entire structure is limited to about one third the operating wavelength. Furthermore, due to the temperature tunability of silicon and germanium the thermo-optical sensitivity was found to be approximately 0.068 nm/K. In addition to this spectral tunability, our proposed device supports transparency windows with 80% transmission in the higher wavelength ranges. Our device is highly promising in the applications of thermo-tunable modulators and obtaining single frequency near-infrared signals from broadband sources.

In this Letter, we numerically propose the one-way perfect absorption of near-infrared radiation in a tunable spectral range with high transmission in the neighboring spectral ranges. This functionality is obtained by using a two-dimensional, guided-mode resonance-based grating-waveguide metasurface that acts as a frequency-selective reflector, a spacer dielectric, and an absorbing oxide layer. Within the bandwidth of the excited guided-mode resonance excited at 1.82 mu m (with a full-width at half-maximum of 19 nm), we confirmed perfect absorption when light was incident from one of the two opposite directions, whereas in the other direction, perfect reflection was observed. The forward-to-backward absorption ratio reached as high as 60, while the thickness of the entire structure was on the order of the operating wavelength. In addition to the spectral tunability of the excited resonances and their bandwidths, our proposed device supports transparency windows with 65% transmission in the adjacent frequency bands. Our 2D grating is also verified to enable near-absolute insensitivity to the polarization state of incident light. Geometrical parameter modification also gives our design great tunability, as we also designed a device with a 300 nm absorption/reflection linewidth. (C) 2020 Optical Society of America

Precise control and stabilization of the operating temperature environment of spacecraft and satellites during their life cycle is of paramount importance to increase device reliabilities and reduce the thermomechanical constraints. Optical solar reflectors are the physical interface between the spacecraft and space, and they are broadband mirrors for the solar spectrum, while having strong thermal emission in the mid-infrared part of the electromagnetic spectrum. Strong light matter interactions in metamaterials and metasurfaces offer significant advantages compared to the conventional methods in performance, weight, launch, and assembly costs. However, the fabrication complexity of these metastructures due to necessitating lithography hinders their upscaling, reproducibility, large-area compatibility, and mass production. In this regard, we propose a facile, lithography-free fabrication route, exploiting oblique deposition to design a metasurface based on disordered and densely packed Indium Tin Oxide (ITO) nanorod forests. The excellent light trapping capability of the nanorod forests, randomness in the geometrical dimensions of these nanorods, combined with the lossy plasmonic nature of ITO in the thermal-infrared range led to strong coupling of thermal radiation to broad plasmonic resonances and, consequently, an experimental emissivity of 0.968, in a very wide range from 2.5 to 25 pm. In the solar spectrum, the low-loss dielectric characteristic of ITO resulted in an experimental solar absorptivity as small as 0.168. Our proposed design with high throughput, robustness, low cost, and high performance, therefore, shows great promise not only for space missions, but also for promoting environmentally friendly passive radiative cooling for our planet and thermal imaging in the field of security labeling.

Colorimetric detection of target molecules with insensitivity to incident-light polarization has attracted considerable attention in recent years. This resulted from the ability to provide rapid output and reduced assay times as a result of color changes upon altering the environment that are easily distinguishable by the naked eye. In this paper, we propose a highly sensitive refractive-index sensor, utilizing the excitation of guided modes of a novel two-dimensional periodically modulated dielectric grating-waveguide structure. The optimized nanosensor can numerically excite guided-mode resonances with an ultranarrow linewidth (full width at half-maximum) of 0.58 nm. Sensitivity is numerically investigated by considering the deposition of dielectric layers on the structure. For a layer thickness of 30 nm, the maximum sensitivity reached as high as 110 nm/refractive index unit (RIU), resulting in a very high figure of merit of 190. The fabricated devices with 30 nm aluminum oxide and zinc oxide coatings achieved a maximum sensitivity of 235.2 nm/RIU with a linewidth of 19 nm. Colorimetric detection with polarization insensitivity is confirmed practically by a simple optical microscope. Samples with different coatings have been observed to have clearly distinct colors, while the color of each sample is nearly identical upon azimuthal rotation. Excellent agreement is obtained between the numerical and experimental results regarding the spectral position of the resonances and sensitivity. The proposed device is, therefore, highly promising in efficient, highly sensitive, almost lossless, and compact molecular diagnostics in the field of biomedicine with personalized, label-free, early point-of-care diagnosis and field analysis, drug detection, and environmental monitoring.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

Strong light-graphene interaction is essential for the integration of graphene to nanophotonic and optoelectronic devices. The plasmonic response of graphene in terahertz and mid-infrared regions enhances this interaction, and other resonance mechanisms can be adopted in near-infrared and visible ranges to achieve perfect light absorption. However, obtaining near-absolute polarization insensitivity with ultra-narrow absorption bandwidth in the visible and near-infrared regimes remains a challenge. In this regard, we numerically propose a graphene perfect absorber, utilizing the excitation of guided-modes of a dielectric slab waveguide by a novel sub-wavelength dielectric grating structure. When the guided-mode resonance is critically coupled to the graphene, we obtain perfect absorption with an ultra-narrow bandwidth (full-width at half-maximum) of 0.8 nm. The proposed design not only preserves the spectral position of the resonance, but also maintains >98% absorption at all polarization angles. The spectral position of the resonance can be tuned as much as 400 nm in visible and near-infrared regimes by tailoring geometrical parameters. The proposed device has great potential in efficient, tunable, ultra-sensitive, compact and easy-to-fabricate advanced photodetectors and color filters.

The phase change behavior of vanadium dioxide (VO2) has been widely explored in a variety of optical and photonic applications. Commonly, its optical parameters have been studied in two extreme regimes: hot (metallic) and cold (insulating) states. However, in the transition temperatures, VO(2)acts like an inherent metamaterial with mixed metallic-insulating character. In this range, the portions of metallic and insulating inclusions are tuned by temperature, and therefore a gradual change of optical parameters can be achieved. In this paper, a universal hybrid modeling approach is developed to model VO(2)in the intermediate region. For this aim, the measured reflectivity data, is analyzed and matched through the transfer matrix method (TMM) simulations where an effective medium theory (EMT) is employed. Based on the findings of this approach, not only the relative portions of inclusions are tailored but also their grain shapes are significantly altered in the transition range. Finally, the modeling approach is testified by experimental findings through dynamic device applications operating at short and mid infrared wavelengths. In addition, the hysteretic behaviors on electrical, optical, and structural parameters of the VO(2)film along the heating and cooling cycles are demonstrated by the experiments and scrutinized by the simulations.