Search

Water-in-salt solutions, i.e. solutions in which the amount of salt by volume or weight is larger than that of the solvent, are attracting increasing attention in electrochemistry due to their distinct features that often include decomposition potentials much higher than those of lower concentration solutions. Despite the high solubility of potassium acetate (KAC) in water at room temperature (up to 25 moles of salt per kg of solvent), the low cost, and the large availability, the use of highly concentrated KAC solutions is still limited to a few examples in energy storage applications and a systematic study of their physical-chemical properties is lacking. To fill this gap, we have investigated the thermal, rheological, electrical, electrochemical, and spectroscopic features of KAC/water solutions in the compositional range between 1 and 25 mol kg-1. We show the presence of a transition between the "salt-in-solvent" and "solvent-in-salt" regimes in the range of 10-15 mol kg-1. Among the explored compositions, the highest concentrations (20 and 25 mol kg-1) exhibit good room temperature conductivity values (55.6 and 31 mS cm-1, respectively) and a large electrochemical potential window (above 2.5 V).

The development of mulch films from wastes of vegetables represents a sustainable alternative to the traditionally used polyethylene ones that follow the principles of circular economy. In this work, we obtained films based on two different industrial vegetable wastes, orange peels (OP) and spinach stems (SS), using hydrolysis at different times (6, 16, and 24 h) and temperatures (30, 50, and 70 °C). Hydrolysis carried out at 30 °C and 24 h has led to films with the best mechanical properties, while high temperatures (70 °C) combined with prolonged treatment times (16 and 24 h) led to materials with lower mechanical resistance and darker coloration. The films' characterization by X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), and uniaxial tensile tests elucidated their chemical structure and physicochemical properties. Additionally, the materials' interaction with water was evaluated and significantly improved by adding a carnauba wax coating. Optical properties, micro and macronutrient content and biodegradation in the soil of selected bioplastics were also determined. Results showed that the proposed materials present fast in-soil biodegradation, good potentiality for weed prevention and improvement of plant growth via soil fertilization.

The effectiveness of Agar gels for copper stain removal from marble surfaces was systematically studied. Gels with different agar concentrations (1, 3, 5%) and different chelating agents used as additives (ethylenediaminetetraacetic acid, EDTA, and ammonium citrate tribasic, TAC) were tested on laboratory marble specimens for different contact times (30 and 60 min). For better characterization, hydrogels were lyophilised and cryogels were obtained. Systematic comparison of different formulations was feasible on cryogels and performed in terms of: (i) the morphological properties, by field-emission scanning electron microscopy (FE-SEM); (ii) the type of Cu(II)-complexes formed and their quantitative comparison by electron paramagnetic resonance (EPR) spectroscopy; (iii) the total amount of copper removed from marble surfaces, by Inductively Coupled Plasma–Optical Emission Spectrometry (ICP-OES). AgarArt 1% with TAC exhibited the highest effectiveness for copper stain removal after 60 min contact (431 μg/cm2). Such a good cleaning effectiveness can be ascribed to the co-presence of the following properties: efficient metal coordination, which is related to the additive presence, and favourable gel morphology, related both to the gel concentration and to the additive type. In fact, it was observed that both the low gel concentration and the presence of TAC are related to a narrow pore size distribution in gels, besides the possibility of copper coordination. The presence of EDTA results in a broader pore size distribution and in a lower gel strength, with respect to gels with TAC. Thus, a new procedure for studying gels was proposed, which allows to optimize the conditions for metal stain removal from built heritage.

The formation of block copolymer nanoparticles is commonly obtained by switching solvent quality from good solvent for both blocks to a selective solvent for one block. The effect of the selective solvent on particle dimension, shape and inner structure has been analyzed in detail, instead less attention has been focused on the role of the common solvent. Poly(ethylene oxide)-block-poly(lactic acid) (PEO-b-PLA) is widely used for the preparation of nanometric drug delivery systems and the control of the particle morphology has relevant effects on bioactivity. In this work we investigate the effect of using different common solvents (acetone, dioxane, tetrahydrofuran, dimethylformamide) on the self-assembly behavior of narrowly dispersed PEO-b-PLA copolymers, synthesized by metal free ring-opening polymerization, with large variation of molecular weight of the hydrophobic block (from 65 to 1300 lactic units). Dynamic light scattering (DLS) and cryo-electron microscopy (cryo-EM) analyses of PEO-b-PLA nanoparticles reveal that their size and shape are strongly dependent on the hydrogen bonding ability of the common solvent used in the self-assembly process. As consequence of these variations, also the cytoxicity of the nanoparticles is affected.

Developing new materials for the separation of gas mixtures is a key subject in setting up a circular economy. In this work, we report the synthesis and application of novel polymeric membranes, based on polymerized ionic liquids (PILs), to be used for CO2 separation from different gas pairs. Phosphonium-based PILs have been copolymerized within an original acrylate formulation that allowed the development of dense membranes able to overcome some of the main limitations related to ionic liquid membranes. Thereby, a collection of phosphonium ionic liquids has been investigated by evaluating the influence of the alkyl chain length and anion type on membrane structure and properties by employing a series of different chemo-physical characterization techniques. The membranes showed a marked preference toward CO2 permeation in the wet state, which simulates the conditions occurring with many CO2-containing gas streams, with two of the studied membranes exceeding the Robeson upper bound for the CO2/H2 gas pair.

Ionic liquid (IL) mixtures enable the design of fluids with finely tuned structural and physicochemical properties for myriad applications. In order to rationally develop and design IL mixtures with the desired properties, a thorough understanding of the structural origins of their physicochemical properties and the thermodynamics of mixing needs to be developed. To elucidate the structural origins of the excess molar volume within IL mixtures containing ions with different alkyl chain lengths, 3 IL mixtures containing 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ILs have been explored in a joint small angle X-ray scattering (SAXS) and 129Xe NMR study. The apolar domains of the IL mixtures were shown to possess similar dimensions to the largest alkyl chain of the mixture with the size evolution determined by whether the shorter alkyl chain was able to interact with the apolar domain. 129Xe NMR results illustrated that the origin of excess molar volume in these mixtures was due to fluctuations within these apolar domains arising from alkyl chain mismatch, with the formation of a greater number of smaller voids within the IL structure. These results indicate that free volume effects for these types of mixtures can be predicted from simple considerations of IL structure and that the structural basis for the formation of excess molar volume in these mixtures is substantially different to IL mixtures formed of different types of ions.

Diels-Alder chemistry has been used for the thermoreversible cross-linking of furan-functionalized ethylene/propylene (EPM) and ethylene/vinyl acetate (EVM) rubbers. Both furan-functionalized elastomers were successfully cross-linked with bismaleimide to yield products with a similar cross-link density. NMR relaxometry and SAXS measurements both show that the apolar EPM-g-furan precursor contains phase-separated polar clusters and that cross-linking with polar bismaleimide occurs in these clusters. The heterogeneously cross-linked network of EPM-g-furan contrasts with the homogeneous network in the polar EVM-g-furan. The heterogeneous character of the cross-links in EPM-g-furan results in a relatively high Youngs modulus, whereas the more uniform cross-linking in EVM-g-furan results in a higher tensile strength and elongation at break.

Upconversion is a photon-management process especially suited to water-splitting cells that exploit wide-bandgap photocatalysts. Currently, such catalysts cannot utilize 95% of the available solar photons. We demonstrate here that the energy-conversion yield for a standard photocatalytic water-splitting device can be enhanced under solar irradiance by using a low-power upconversion system that recovers part of the unutilized incident sub-bandgap photons. The upconverter is based on a sensitized triplet-triplet annihilation mechanism (sTTA-UC) obtained in a dye-doped elastomer and boosted by a fluorescent nanocrystal/polymer composite that allows for broadband light harvesting. The complementary and tailored optical properties of these materials enable efficient upconversion at subsolar irradiance, allowing the realization of the first prototype water-splitting cell assisted by solid-state upconversion. In our proof-of concept device the increase of the performance is 3.5%, which grows to 6.3% if concentrated sunlight (10 sun) is used. Our experiments show how the sTTA-UC materials can be successfully implemented in technologically relevant devices while matching the strict requirements of clean-energy production.

Membrane modification is becoming ever more relevant for mitigating fouling phenomena within wastewater treatment applications. Past research included a novel low-fouling coating using polymerizable bicontinuous microemulsion (PBM) induced by UV-LED polymerization. This additional cover layer deteriorated the filtration capacity significantly, potentially due to the observed high pore intrusion of the liquid PBM prior to the casting process. Therefore, this work addressed an innovative experimental protocol for controlling the viscosity of polymerizable bicontinuous microemulsions (PBM) before casting on commercial ultrafiltration (UF) membranes. Prior to the coating procedure, the PBM viscosity modulation was carried out by controlled radical polymerization (CRP). The regulation was conducted by introducing the radical inhibitor 2,2,6,6-tetramethylpiperidine 1-oxyl after a certain time (CRP time). The ensuing controlled radical polymerized PBM (CRP-PBM) showed a higher viscosity than the original unpolymerized PBM, as confirmed by rheological measurements. Nevertheless, the resulting CRP-PBM-cast membranes had a lower permeability in water filtration experiments despite a higher viscosity and potentially lower pore intrusion. This result is due to different polymeric structures of the differently polymerized PBM, as confirmed by solid-state nuclear magnetic resonance (NMR) investigations. The findings can be useful for future developments in the membrane science field for production of specific membrane-coating layers for diverse applications.

The possibility to use vegetable biomass, with minimal processing, as new green bioplastic for packaging is very appealing to mitigate environmental issues due to broad usage of conventional plastics. Here we developed vegetable bioplastic films from carrot pomace with good mechanical properties and glass transition temperature function of humidity, with a lowest value of −60 °C when highly hydrated. These properties were exploited to set-up scalable and green fabrication techniques for the production of macroscopic objects with elaborate shapes and detailed features at the micro scale. By means of a combination of techniques (FTIR, NMR, DSC and DMTA) we provide a comprehensive picture of the material structure and how the absorbed water changes the macromolecules’ structure, finally explaining the source of the glass transition of the material.

Photon upconversion based on sensitized triplet-triplet annihilation (sTTA) is considered as a promising strategy for the development of light-managing materials aimed to enhance the performance of solar devices by recovering unused low-energy photons. Here, we demonstrate that, thanks to the fast diffusion of excitons, the creation of triplet pairs in metal-organic framework nanocrystals (nMOFs) with size smaller than the exciton diffusion length implies a 100% TTA yield regardless of the illumination condition. This makes each nMOF a thresholdless, single-unit annihilator. We develop a kinetic model for describing the upconversion dynamics in a nanocrystals ensemble, which allows us to define the threshold excitation intensity Ith box required to reach the maximum conversion yield. For materials based on thresholdless annihilators, Ith box is determined by the statistical distribution of the excitation energy among nanocrystals. The model is validated by fabricating a nanocomposite material based on nMOFs, which shows efficient upconversion under a few percent of solar irradiance, matching the requirements of real life solar technologies. The statistical analysis reproduces the experimental findings, and represents a general tool for predicting the optimal compromise between dimensions and concentration of nMOFs with a given crystalline structure that minimizes the irradiance at which the system starts to fully operate.

Highly controlled polymers and nanostructures are increasingly translated from the lab to the industry. Together with the industrialization of complex systems from renewable sources, a paradigm change in the processing of plastics and rubbers is underway, requiring a new generation of analytical tools. Here, we present the recent developments in time domain NMR (TD-NMR), starting with an introduction of the methods. Several examples illustrate the new take on traditional issues like the measurement of crosslink density in vulcanized rubber or the monitoring of crystallization kinetics, as well as the unique information that can be extracted from multiphase, nanophase and composite materials. Generally, TD-NMR is capable of determining structural parameters that are in agreement with other techniques and with the final macroscopic properties of industrial interest, as well as reveal details on the local homogeneity that are difficult to obtain otherwise. Considering its moderate technical and space requirements of performing, TD-NMR is a good candidate for assisting product and process development in several applications throughout the rubber, plastics, composites and adhesives industry.

Reversible addition-fragmentation chain transfer polymerization of chloroprene on the surface of silica nanoparticles was performed to obtain polychloroprene-grafted-silica nanoparticles (PCP-g-SiO2 NPs). These particles were dispersed in a commercial polychloroprene matrix to obtain PCP nanocomposites with different silica core loadings (1, 5, 10, and 25 wt%). Two different chain graft densities were studied (“low,” 0.022 ch/nm2 and “high,” 0.21 ch/nm2) as a function of the grafted polymer molecular mass. The cured samples showed significant improvement in the mechanical properties of the PCP rubber nanocomposites as compared to the unfilled PCP as measured by standard tensile and dynamic mechanical analysis even with low silica content. The mechanical properties of the nanocomposites were notably enhanced when the graft density was low and grafted molecular masses were high. Transmission electron microscopy (TEM) and Small-Angle X-ray Scattering (SAXS) were used to analyze the dispersion states of the grafted nanoparticles which confirmed the correlation between high grafted chain lengths and improved dispersion states and mechanical properties.

Subtle alterations in the mid-block of polystyrene-b-poly (ethylene-co-butylene)-b-polystyrene (SEBS) have a significant impact on the mechanical properties of the resulting microphase separated materials. In samples with high butylene content, the ethylene-co-butylene (EB) phase behaves as a rubber, as seen by differential scanning calorimetry (DSC), time domain (TD) and Magic Angle Spinning (MAS) NMR, X-ray scattering at small (SAXS), and wide (WAXS) angles. In samples where the butylene content is lower&mdash, but still sufficient to prevent crystallization in bulk EB&mdash, the DSC thermogram presents a broad endothermic transition upon heating from 221 to 300 K. TD NMR, supported by WAXS and dielectric spectroscopy measurements, probed the dynamic phenomena of EB during this transition. The results suggest the existence of a rotator phase for the EB block below room temperature, as a result of nanoconfinement.

The sensitized triplet-triplet annihilation-based upconversion in bicomponent systems is currently considered the most promising strategy for increasing the light-harvesting ability of solar cells. Flexible, manageable, inexpensive up-converting devices become possible by implementing this process in elastomers. Here, we report a study combining optical spectroscopy data of the light conversion process with the nano- and macroscopic viscoelastic characterization of the host material embedding the active dyes, in order to find a rationale for the fabrication of efficient solid-state upconverting systems. By using the poly(n-alkyl acrylates) as a model of the monophasic elastomers, we demonstrate that the yield of the bimolecular interactions at the base of the upconversion process, namely, energy transfer and triplet-triplet annihilation, is mainly determined by the glass transition temperature (Tg) of the polymer. By employing the polyoctyl acrylate (Tg = 211 K), we achieved a conversion yield at the solid state larger than 10% at an irradiance of 1 sun, showing the potential of the elastomer-based upconverting materials for developing real-world devices.

Micro and mesoporous materials are often used in catalysis, purification, composite filler, and other applications. Almond shell is an important agricultural byproduct that can be transformed to microporous and mesoporous carbon. In this work, we produced biochar from almond shell using a thermal treatment procedure in an inert atmosphere and characterized the pores with nitrogen adsorption, environmental SEM, and 129Xe NMR. The latter technique differentiates adsorbed and nonadsorbed xenon and permits the correlation of different processing conditions with xenon adsorption and diffusivity. The relevance of removing the ash produced during the charring process has been included in the study. Moreover, the xenon exchange between meso- and micro-pores has been directly observed by 129Xe NMR, demonstrating that after ash removal by water the materials have high accessibility of the pores by external fluids, thus increasing the usefulness as filtration or adsorption material.

Shortly after processing, Polyethylene/Polypropylene (PE/PP) multilayer films demonstrate an increase in tensile modulus and other mechanical properties when the individual layer thickness is below 0.5 μm. Subsequent annealing at 60 °C for 16 h brings the properties of all other samples to similar values. WAXD characterization of the layered films identified a prevalence of mesophase in the thicker PP layers. In samples with increased layer numerosity or subjected to annealing, WAXD detected its conversion to α crystalline phase that correlates with improved mechanical properties. SSNMR and DSC detailed the defective nature of α iPP crystallites. Comonomers, detected by NMR in the commercial polymers used for the films, are the source of "tunable disorder" that dictates the formation of the PP mesophase and the low temperature of conversion to the mechanically stronger defective α phase. Soft intrafilm layer interfaces instead enable nucleation and localized polymer chain rearrangement even without annealing

Nanocrystals (NCs) surface characterization is a fundamental step for understanding the physical and chemical phenomena involved at the nanoscale. Surface energy and chemistry depend on particle size and composition, and, in turn, determine the interaction of NCs with the surrounding environment, their properties and stability, and the feasibility of nanocomposites. This work aims at extracting more information on the surface of different titanium dioxide polymorphs using1H-TD-NMR of water. Taking advantage of the interaction between water molecules and titanium dioxide NCs, it is possible to correlate the proton transverse relaxation times (T2) as the function of the concentration and the specific surface area (δp·Cm) and use it as an indicator of the crystal phase. Examples of three different crystals phase, rutile, anatase, and brookite, have been finely characterized and their behavior in water solution have been studied with TD-NMR. The results show a linear correlation between relaxivity (R2) and their concentration Cm. The resulting slopes, after normalization for the specific surface, represent the surface/water interaction and range from 1.28 g m-2s-1of 50 nm rutile nanocrystals to 0.52 for similar sized brookite. Even higher slopes (1.85) characterize smaller rutile NCs, in qualitative accordance with the trends of surface energy. Thanks to proton relaxation phenomena that occur at the NCs surface, it is possible to differentiate the crystal phase and the specific surface area of titanium dioxide polymorphs in water solution.

The valorization of vegetable waste can create opportunities to produce new valuable bioplastics.In thisstudy, a one-step process to fully convert a variety of vegetable waste materials into bioplasticfilms is reported. The process is carried out in a diluted aqueous HCl solution at room temperature,it is easily scalable, and with no environmental concerns associated with the use of organic ordangerous chemicals. The generated bioplastics arecompletely biodegradable and environmentallyfriendly. Freestanding, flexible bioplastic films were obtained from vegetable waste like carrot,parsley, radicchio and cauliflower. They have similar mechanical properties with other bioplastics, like thermoplastic starch, and showed to have little migration in a food simulant. The color andthe functional properties (i.e. antioxidant capability) of the starting vegetables are preserved inthe bioplastics, thanks to the mild conditions of the fabrication process. The new conversionprocess allows the blending of the bioplastics with other natural or synthetic polymers, in order to improve their mechanical and gas barrier properties, like the oxygen permability (OP), thusexpanding their field of applications. Poly vinyl alcohol (PVA)/carrot bioplastic film showed an OPof 31.2 cm3 μm m−2 day−1 kPa−1, which is lower than the OP for other synthetic films, like highdensity polyethylene films (HDPE), and similar to edible materials like chitosan. &nbsp

Luminescent solar concentrators are cost-effective complements to semiconductor photovoltaics that can boost the output of solar cells and allow for the integration of photovoltaic-active architectural elements into buildings (for example, photovoltaic windows). Colloidal quantum dots are attractive for use in luminescent solar concentrators, but their small Stokes shift results in reabsorption losses that hinder the realization of large-area devices. Here, we use Stokes-shift-engineeredCdSe/CdS quantum dots with giant shells (giant quantum dots) to realize luminescent solar concentrators without reabsorption losses for device dimensions up to tens of centimetres. Monte-Carlo simulations show a 100-fold increase in efficiency using giant quantum dots compared with core-only nanocrystals. We demonstrate the feasibility of this approach by using high-optical-quality quantum dot-polymethylmethacrylate nanocomposites fabricated using a modified industrial method that preserves the light-emitting properties of giant quantum dots upon incorporation into the polymer. Study of these luminescent solar concentrators yields optical efficiencies >10% and an effective concentration factor of 4.4. These results demonstrate the significant promise of Stokes-shift-engineered quantum dots for large-area luminescent solar concentrators. © 2014 Macmillan Publishers Limited. All rights reserved.

Building-integrated photovoltaics is gaining consensus as a renewable energy technology for producing electricity at the point of use. Luminescent solar concentrators (LSCs) could extend architectural integration to the urban environment by realizing electrode-less photovoltaic windows. Crucial for large-area LSCs is the suppression of reabsorption losses, which requires emitters with negligible overlap between their absorption and emission spectra. Here, we demonstrate the use of indirect-bandgap semiconductor nanostructures such as highly emissive silicon quantum dots. Silicon is non-toxic, low-cost and ultra-earth-abundant, which avoids the limitations to the industrial scaling of quantum dots composed of low-abundance elements. Suppressed reabsorption and scattering losses lead to nearly ideal LSCs with an optical efficiency of η = 2.85%, matching state-of-the-art semi-transparent LSCs. Monte Carlo simulations indicate that optimized silicon quantum dot LSCs have a clear path to η > 5% for 1 m2 devices. We are finally able to realize flexible LSCs with performances comparable to those of flat concentrators, which opens the way to a new design freedom for building-integrated photovoltaics elements. Reabsorption losses in luminescent solar concentrators can be avoided by the use of indirect-bandgap semiconductor nanostructures. The technology has been used to demonstrate flexible luminescent solar concentrators with performance comparable to flat concentrators.

Super paramagnetic iron oxide nanoparticles (SPION) were augmented by both hyaluronic acid (HA) and bovine serum albumin (BSA), each covalently conjugated to dopamine (DA) enabling their anchoring to the SPION. HA and BSA were found to simultaneously serve as stabilizing polymers of Fe₃O₄·DA-BSA/HA in water. Fe₃O₄·DA-BSA/HA efficiently entrapped and released the hydrophobic cytotoxic drug paclitaxel (PTX). The relative amount of HA and BSA modulates not only the total solubility but also the paramagnetic relaxation properties of the preparation. The entrapping of PTX did not influence the paramagnetic relaxation properties of Fe₃O₄·DA-BSA. Thus, by tuning the surface structure and loading, we can tune the theranostic properties of the system.

The formation of ionic liquid (IL) mixtures has been proposed as an approach to rationally fine-tune the physicochemical properties of ILs for a variety of applications. However, the effects of forming such mixtures on the resultant properties of the liquids are only beginning to be understood. Towards a more complete understanding of both the thermodynamics of mixing ILs and the effect of mixing these liquids on their structures and physicochemical properties, the spatial arrangement and free volume of IL mixtures containing the common [C4C1im]+ cation and different anions have been systematically explored using small angle X-ray scattering (SAXS), positron annihilation lifetime spectroscopy (PALS) and 129Xe NMR techniques. Anion size has the greatest effect on the spatial arrangement of the ILs and their mixtures in terms of the size of the non-polar domains and inter-ion distances. It was found that differences in coulombic attraction between oppositely charged ions arising from the distribution of charge density amongst the atoms of the anion also significantly influences these inter-ion distances. PALS and 129Xe NMR results pertaining to the free volume of these mixtures were found to strongly correlate with each other despite the vastly different timescales of these techniques. Furthermore, the excess free volumes calculated from each of these measurements were in excellent agreement with the excess volumes of mixing measured for the IL mixtures investigated. The correspondence of these techniques indicates that the static and dynamic free volume of these liquid mixtures are strongly linked. Consequently, fluxional processes such as hydrogen bonding do not significantly contribute to the free volumes of these liquids compared to the spatial arrangement of ions arising from their size, shape and coulombic attraction. Given the relationship between free volume and transport properties such as viscosity and conductivity, these results provide a link between the structures of IL mixtures, the thermodynamics of mixing and their physicochemical properties.

The technological application of sensitized upconversion based on triplet-triplet annihilation (TTA) requires the transition from systems operating in liquid solutions to solid-state materials. Here, we demonstrate that the high upconversion efficiency reported in hyper-cross-linked nanoparticles does not originate from residual mobility of the embedded dyes as it happens in soft hosts. The hyper-reticulation from one side blocks the dyes in fixed positions, but on the other one, it suppresses the nonradiative spontaneous decay of the triplet excitons, reducing intramolecular relaxations. TTA is thus enabled by an unprecedented extension of the triplet lifetime, which grants long excitons diffusion lengths by hopping among the dye framework and gives rise to high upconversion yield without any molecular displacement. This finding paves the way for the design of a new class of upconverting materials, which in principle can operate at excitation intensities even lower than those requested in liquid or in rubber hosts.

Carminic acid, a natural hydrophilic dye extensively used in the food and cosmetic industries, is converted in hydrophobic dyes by acetylation or pivaloylation. These derivatives are successfully used as biocolourants for rubber objects. In this paper, spectroscopic properties of the carminic acid derivatives in dimethyl sulfoxide and in polybutylacrylate are studied by means of photoluminescence and time-resolved photoluminescence decays, revealing a hypsochromic effect due to the presence of bulky substituents as the acetyl or pivaloyl groups. Molecular mechanics and density functional theory calculations confirm the disruption of planarity between the sugar ring and the anthraquinoid system determined by the esterification.

The present study reports on the preparation and characterization of innovative “self-cleaning” nano-TiO2 treatments to be used in cultural heritage, based on dispersion of solar-light activated TiO2 nanocrystals. The semiconductor has been prepared by an easy and low-cost non-aqueous procedure, providing anatase (NA_TiO2) nanoparticles photo-active not only under UV-light but also under solar irradiation. NA_TiO2 allows obtaining very stable dispersions either in water or in ethylene glycol used to produce homogeneous nano-TiO2 treatments on Noto stone and Carrara marble, which display excellent aesthetic compatibility, do not remarkably affect the capillary water absorption of the stones and slightly increase their wettability. The new treatment exhibits higher photocatalytic activity compared to that based on commercial TiO2 (P25_TiO2). This behavior has been attributed not only to the morphological properties of the treatments and of the stones, but also to the presence of residual benzyl alcohol molecules anchored on the anatase NP surfaces. This provides solar light absorption and partially improves the charge trapping, thus increasing the photoefficiency. The overall results suggest that the positive combination of high dispersion, solar-light absorption and reduced recombination effects in NPs plays a key role in the development of efficient photocatalytic treatments for stone restoration.

Poly(n-butylacrylate)@polystyrene nanoparticles behaving as a capsule-based sealing nanoadditive are synthesized through an optimized semicontinuous emulsion polymerization protocol. Solid state time-domain (1)H-NMR and (13)C magic angle spinning (MAS) NMR analysis suggest strong phase separation. Line width of (13)C resonances in cross polarization and single pulse experiment MAS-NMR spectra indicates that the peculiar mobility of each phase is preserved at the nanoscale. Atomic force spectroscopy (AFM) shows the permanence of spherical shape in absence of solvent (i.e., subsequent to strong capillary and surface forces) up to moderate external load, as well as the possibility of plastically deforming the polystyrene shell and ultimately triggering the nanoparticle flow at higher force loads. The breakdown characteristic of the nanoparticle shows for the first time baroplastic behavior on a single particle with precise biphasic core@shell morphology.

We describe two synthesis approaches to colloidal Cu(3)P nanocrystals using trioctylphosphine (TOP) as phosphorus precursor. One approach is based on the homogeneous nucleation of small Cu(3)P nanocrystals with hexagonal plate-like morphology and with sizes that can be tuned from 5 to 50 nm depending on the reaction time. In the other approach, metallic Cu nanocrystals are nucleated first and then they are progressively phosphorized to Cu(3)P. In this case, intermediate Janus-like dimeric nanoparticles can be isolated, which are made of two domains of different materials, Cu and Cu(3)P, sharing a flat epitaxial interface. The Janus-like nanoparticles can be transformed back to single-crystalline copper particles if they are annealed at high temperature under high vacuum conditions, which makes them an interesting source of phosphorus. The features of the Cu-Cu(3)P Janus-like nanoparticles are compared with those of the striped microstructure discovered more than two decades ago in the rapidly quenched Cu-Cu(3)P eutectic of the Cu-P alloy, suggesting that other alloy/eutectic systems that display similar behavior might give origin to nanostructures with flat, epitaxial interface between domains of two diverse materials. Finally, the electrochemical properties of the copper phosphide plates are studied, and they are found to be capable of undergoing lithiation/delithiation through a displacement reaction, while the Janus-like Cu-Cu(3)P particles do not display an electrochemical behavior that would make them suitable for applications in batteries.

We report a high-yield, low cost synthesis route to colloidal Cu1-xInS2 nanocrystals with a tunable amount of Cu vacancies in the crystal lattice. These are then converted into quaternary Cu-In-Zn-S (CIZS)nanocrystals by partial exchange of Cu+ and In3+ cations with Zn2+ cations. The photoluminescence quantum yield of these CIZS nanocrystals could be tuned up to a record 80\%, depending on the amount of copper vacancies.

PEGylation of metal oxide nanoparticles is the common approach to improve their biocompatibility and in vivo circulation time. In this work, we present a combined experimental and theoretical study to determine the operating condition that guarantee very high grafting densities, which are desirable in any biomedical application. Moreover, we present an insightful conformational analysis spanning different coverage regimes and increasing polymer chain lengths. Based on 13C NMR measurements and molecular dynamics simulations, we show that classical and popular models of polymer conformation on surfaces fail in determining the mushroom-to-brush transition point and prove that it actually takes place only at rather high grafting density values.